De Maxipress F met omkeerbare bekken is een gietijzeren klem met volledig beschermde dubbele schroefdraad. Maximum klemkracht 900kg.
Verkrijgbaar in verschillende lengtes
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to use on the Belmash SDR2200
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
Cutterhead with alternate shear reversible knives and spurs in high quality carbide (HW). The blades have an alternate axial angle for improved cutting results. Thanks to the pre-cutters at the top and bottom, your work always has a clean finish. Perfectly suited for rabbeting. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm.
This tenoning cart with tenoning hood is available as an option with the TT320N2CU and TT410N2CU combination machines.
The BELMASH PC 3000 panel carrier is designed to facilitate work with large workpieces (plywood, laminated chipboard, MDF, etc.).
Thanks to the robust and mobile design of the panel carrier, workpieces up to a thickness of 40 mm can be easily moved to the machine or workbench. The panel carrier is equipped with swivel castors, an adjustable height and is tiltable (vertically - horizontally) by means of a convenient click system. The adjustable height of this plate carrier means that it can be used on all machines and/or work tables. By adjusting it to the right height and placing it behind a machine, it can also be used as a table-top output.
The design of the panel carrier allows panels weighing up to 100 kg to be moved by one person, which significantly increases productivity and reduces costs.
This mortiser with 16 mm Westcott chuck is available as an option with the combination machine TT32K5SL.
With its ergonomic shape, this handle helps you to easily transport panels in different materials. The handle has three basic functions: pulling, carrying or lifting. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. Suitable for panels between 0mm and 46mm thick.
Optionally, two clamps are available to be placed on the handle.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. The smaller bearing provides an upright standing side to the rounding. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Grooving saw blade with flat (FZ) tungsten teeth to be used for cutting grooves in hardwood, softwood, timber wood, and plastic coated panel. The sawing blades have a bore of 30mm and are ideally suited for use on all spindle moulding machines or sawing tables.
Saw blade available in different diameters
Zaagblad met 36 tanden
Zaagblad met wisseltanden, spaanbrekers en anti-kickback design. Met weinig tanden voor een ruwe en snelle snede van het hout. Voorzien van tanden in hoogwaardig hardmetaal (widia). Zowel geschikt voor afkorten als in lengte verzagen van harde en zachte houtsoorten. Ook te gebruiken voor het verzagen van spaanplaten of eenzijdig beplakt hout. Ideaal voor werfzagen of brandhoutwipzagen. Made in Germany, profiteer dus van de oerdegelijke Duitse kwaliteit.
Lame de scie avec 20 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
Gabarit de fraisage à utiliser sur la fraise Virutex FR129VB pour les charnières de porte pour fraiser Argenta 80/80. Ce moule ne convient que pour le modèle 80/80 d'Argenta. Autres modèles disponibles. Charnière non comprise.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. At the top there is a second roller (width 92mm) for stationary glueing along the top with the machine.
Attention: this hand gluer comes standard with a rubber roller, suitable for vinyl (white) adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available without roller at the top (models EM26D and EM126T).
Virutex's 'Angle Copy' angle copier always ensures the correct angle without having to calculate or measure angles. Simply press the Angle Copy into the corner you are working in and the device will copy it. With the help of a button, you can affix the set angle so that the correct angle is always cut. Can be used in both inside and outside corners. Thanks to the protractor, you can also use the Angle Copy to manually indicate angles on your workpiece.
Deze frees is geschikt voor het maken van zwaluwstaartverbindingen. Zwaluwstaartverbindingen zijn klassieke, maar ijzersterke mechanische verbindingen om te gebruiken in houtbewerking. Gebruik deze verbindingen om kasten, lades, kisten of andere hoekverbindingen te vervaardigen. Dankzij de hardmetalen (widia) snijvlakken is een precieze en nette afwerking van uw freeswerken te allen tijde gegarandeerd.
Om sneller en efficiënter te werken kan u gebruik maken van een mal voor zwaluwstaartverbindingen.
Practical and reliable support that makes it possible to install panels, doors, etc... to be held in place. For pieces with a maximum thickness between 6mm and 80mm. Thanks to its robust design, the SP270R easily supports pieces up to 80kg. The support is very easy to use. Secure your piece by placing it in the clamp and pressing it down. To unload it again, use the foot pedal.
Tenon gabarit TJ-85 pour les scies à table Itamac Panthera (Harvest) HW110SE.
Idéal pour scier des tenons, etc.
SHOWROOM MODEL, colours 2022
The Air Flux Cyclone Pro series 3500 easily distinguishes itself thanks to its unique performance. It comes with a powerful engine (4HP), compared to its competitors (maximum 3HP). Noise pollution is kept to a minimum thanks to the dynamically balanced rotor blade. The rotor blade is designed entirely in metal, with a minimum thickness of 3mm.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters. The waste is collected in a removable, movable metal container. This reduces the disposal of waste to a simple and safe operation. The waste containers are equipped with an easy-to-unlock handle and a visual inspection window. The mobile waste container has a capacity of 380 litres.
The wide inlet (200 mm) makes the extractor particularly suitable for integration with systems that generate a high air flow.
More than 99% of wood and dust particles are filtered from the air flow. High-quality cartridge filters with PTFE membranes are used. Larger chips end up in the collection barrel, remaining dust particles go into the filter cartridge. Here the dust is filtered again to 0.4 microns.
This unit is suitable for mixed dust and chips from solid wood machinery and fine dust in non-professional production environments.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 40mm Nr. 0091 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Black PVC dust hood with outlet diameter 100mm to be used with the Air Flux dust extractors. The size of the dust cap mouth is 415x325mm.
Zaaglint met lengte 4670mm om te gebruiken op de TT50BS of TT61BS lintzaagmachine van Tendotools. Dit zaaglint beschikt over 4 TPI (tanden per inch) en heeft een breedte van 20mm. Dit zaaglint in gehard staal "Flexback" is erg geschikt voor multifunctioneel zagen. Gebruik dit zaaglint zowel voor hout als voor plastics. De tanden van het zaagblad kregen een extra thermische behandeling voor verhoogde hardheid. Hierdoor blijft de band erg soepel en verhoogt uw zaagcomfort dankzij de hardheid van de tanden.
Set profielmessen hoogte 40mm Nr. 0020 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Content
De Maxipress met omkeerbare bekken is een gietijzeren klem met volledig beschermde dubbele schroefdraad waardoor deze beschermd is tegen invloeden van buitenaf: stukjes beton, staalsplinter, lasdeeltjes enz.. De dubbele schroefdraad vermenigvuldigt zowel de snelheid als de drukcapaciteit. De dubbele schroefdraad zorgt voor een volledig rechte opwaartse beweging zonder torsie. In het draaisysteem van de beschermde dubbele schroefdraad is een uitsparing voorzien om de schroef in te vetten. De Maxipress is voorzien van rondvormige klauwen die toelaten om rond hoeken of uitsteeksels te werken. De Maxipress is een extra resistant gewalst stalen bar met anti roest behandeld. Deze lijmklem heeft een gietijzeren bekken gecoat met epoxy verf, alsook is deze voorzien van een positiesysteem om een vrije val van de klauw te voorkomen. De Maxipress is eveneens voorzien van een ergonomische handgreep met 3D-gewrichtspositie.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDR2200.
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
Cutterhead with alternate shear reversible knives and spurs in high quality carbide (HW). The blades have an alternate axial angle for improved cutting results. Thanks to the pre-cutters at the top and bottom, your work always has a clean finish. Perfectly suited for rabbeting. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm.
This tenoning cart with tenoning hood is available as an option with the TT320N2CU and TT410N2CU combination machines.
The BELMASH PC 3000 panel carrier is designed to facilitate work with large workpieces (plywood, laminated chipboard, MDF, etc.).
Thanks to the robust and mobile design of the panel carrier, workpieces up to a thickness of 40 mm can be easily moved to the machine or workbench. The panel carrier is equipped with swivel castors, an adjustable height and is tiltable (vertically - horizontally) by means of a convenient click system. The adjustable height of this plate carrier means that it can be used on all machines and/or work tables. By adjusting it to the right height and placing it behind a machine, it can also be used as a table-top output.
The design of the panel carrier allows panels weighing up to 100 kg to be moved by one person, which significantly increases productivity and reduces costs.
This 250 x 370 mm mortiser with a 16 mm Westcott chuck is available as an option with the combination machine TT32K5SL.
With its ergonomic shape, this handle helps you to easily transport panels in different materials. The handle has three basic functions: pulling, carrying or lifting. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. Suitable for panels between 0mm and 46mm thick.
Optionally, two clamps are available to be placed on the handle.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. The smaller bearing provides an upright standing side to the rounding. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Grooving saw blade with flat (FZ) tungsten teeth to be used for cutting grooves in hardwood, softwood, timber wood, and plastic coated panel. The sawing blades have a bore of 30mm and are ideally suited for use on all spindle moulding machines or sawing tables.
Saw blade available in different diameters
Zaagblad met 36 tanden
Zaagblad met wisseltanden, spaanbrekers en anti-kickback design. Met weinig tanden voor een ruwe en snelle snede van het hout. Voorzien van tanden in hoogwaardig hardmetaal (widia). Zowel geschikt voor afkorten als in lengte verzagen van harde en zachte houtsoorten. Ook te gebruiken voor het verzagen van spaanplaten of eenzijdig beplakt hout. Ideaal voor werfzagen of brandhoutwipzagen. Made in Germany, profiteer dus van de oerdegelijke Duitse kwaliteit.
Lame de scie avec 20 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
Gabarit de fraisage à utiliser sur la fraise Virutex FR129VB pour les charnières de porte pour fraiser Argenta 80/80. Ce moule ne convient que pour le modèle 80/80 d'Argenta. Autres modèles disponibles. Charnière non comprise.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM25D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM125T has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. Simply press the trigger to run the glue over the roll. Using this trigger you will always obtain the right amount of glue for your project. Thanks to the support, the hand gluer can easily be put away. For cleaning, you can keep this adhesive under water without risk of damage. At the top there is a second roller (width 92mm) for stationary glueing along the top with the machine.
Attention: this adhesive comes standard with a rubber roller, suitable for vinyl adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available without roller at the top (models EM26D and EM126T).
Virutex's 'Angle Copy' angle copier always ensures the correct angle without having to calculate or measure angles. Simply press the Angle Copy into the corner you are working in and the device will copy it. With the help of a button, you can affix the set angle so that the correct angle is always cut. Can be used in both inside and outside corners. Thanks to the protractor, you can also use the Angle Copy to manually indicate angles on your workpiece.
Deze frees is geschikt voor het maken van zwaluwstaartverbindingen. Zwaluwstaartverbindingen zijn klassieke, maar ijzersterke mechanische verbindingen om te gebruiken in houtbewerking. Gebruik deze verbindingen om kasten, lades, kisten of andere hoekverbindingen te vervaardigen. Dankzij de hardmetalen (widia) snijvlakken is een precieze en nette afwerking van uw freeswerken te allen tijde gegarandeerd.
Om sneller en efficiënter te werken kan u gebruik maken van een mal voor zwaluwstaartverbindingen.
Practical and reliable support that makes it possible to install panels, doors, etc... to be held in place. For pieces with a maximum thickness between 6mm and 80mm. Thanks to its robust design, the SP270R easily supports pieces up to 80kg. The support is very easy to use. Secure your piece by placing it in the clamp and pressing it down. To unload it again, use the foot pedal.
Tenon gabarit TJ-85 pour les scies à table Itamac Panthera (Harvest) HW110SE.
Idéal pour scier des tenons, etc.
The Air Flux Cyclone Pro series 3500 easily distinguishes itself thanks to its unique performance. It comes with a powerful engine (4HP), compared to its competitors (maximum 3HP). Noise pollution is kept to a minimum thanks to the dynamically balanced rotor blade. The rotor blade is designed entirely in metal, with a minimum thickness of 3mm.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters. The waste is collected in a removable, movable metal container. This reduces the disposal of waste to a simple and safe operation. The waste containers are equipped with an easy-to-unlock handle and a visual inspection window. The mobile waste container has a capacity of 380 litres.
The wide inlet (200 mm) makes the extractor particularly suitable for integration with systems that generate a high air flow.
More than 99% of wood and dust particles are filtered from the air flow. High-quality cartridge filters with PTFE membranes are used. Larger chips end up in the collection barrel, remaining dust particles go into the filter cartridge. Here the dust is filtered again to 0.4 microns.
This unit is suitable for mixed dust and chips from solid wood machinery and fine dust in non-professional production environments.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 40mm Nr. 0091 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Black PVC dust hood with outlet diameter 100mm to be used with the Air Flux dust extractors. The size of the dust cap mouth is 415x325mm.
Zaaglint met lengte 4670mm om te gebruiken op de TT50BS of TT61BS lintzaagmachine van Tendotools. Dit zaaglint beschikt over 4 TPI (tanden per inch) en heeft een breedte van 20mm. Dit zaaglint in gehard staal "Flexback" is erg geschikt voor multifunctioneel zagen. Gebruik dit zaaglint zowel voor hout als voor plastics. De tanden van het zaagblad kregen een extra thermische behandeling voor verhoogde hardheid. Hierdoor blijft de band erg soepel en verhoogt uw zaagcomfort dankzij de hardheid van de tanden.
Set profielmessen hoogte 40mm Nr. 0020 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Weight
ND
3,3 kg
0,05 kg
1 kg
10 kg
27 kg
25 kg
1 kg
0,05 kg
1 kg
1 kg
1 kg
0,1 kg
2 kg
0,5 kg
0,05 kg
3 kg
5 kg
150 kg
0,05 kg
0,05 kg
0,05 kg
1 kg
0,5 kg
0,05 kg
Dimensions
ND
30 × 26 × 7 cm
ND
ND
ND
159 × 61,4 × 115 cm
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
134 × 90 × 220 cm
ND
0,4 cm
0,4 cm
41,5 × 32,5 cm
ND
0,4 cm
Additional information
Poids
ND
Plage de serrage
40cm, 60cm, 80cm, 100cm, 120cm, 150cm, 200cm
Profondeur de serrage
12cm
Force de serrage
900kg
Poids
3,3 kg
Dimensions
30 × 26 × 7 cm
Max. hoogte werkstuk
63mm
Max. breedte werkstuk
270mm
Poids
0,05 kg
Diamètre
25,4mm
Longeur de coupe
16mm
Longueur
44mm
Rayon
R9,5
Faces de coupe
2
Poids
1 kg
Diamètre
125mm
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
2
nombre de dents
4
Longeur de coupe
32mm
Hauteur de rainure
50mm
RPM Min-Max
6100-10600
Poids
10 kg
Poids
27 kg
Dimensions
159 × 61,4 × 115 cm
Draagvermogen
100 kg
Poids
25 kg
Mandrin
16 mm
Boortafel
250 x 370 mm
Poids
1 kg
Max. Draagkracht
70kg
Poids
0,05 kg
Diamètre
20,7mm
Longeur de coupe
10mm
Longueur
49mm
Rayon
R4
Queue
8mm
Faces de coupe
2
Poids
1 kg
Diamètre lame de scie
125mm, 150mm, 180mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
5,0mm
Epaisseur lame de scie
4,0mm
nombre de dents
12, 18, 24
Poids
1 kg
Diamètre lame de scie
400mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,5mm
nombre de dents
36
Poids
1 kg
Diamètre lame de scie
315mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,2mm
nombre de dents
20
Poids
0,1 kg
Poids
2 kg
Breedte lijmrol onderaan
122mm, 180mm
Breedte lijmrol bovenaan
92mm
Inhoud lijmbak
1kg, 1,4kg
Poids
0,5 kg
Poids
0,05 kg
Diamètre
6,4mm
Longeur de coupe
8mm
Longueur
44mm
Angle
7°
Faces de coupe
2
Queue
8mm
Poids
3 kg
Max. dikte van het stuk
6-80mm
Max. draagkracht
80kg
Poids
5 kg
Poids
150 kg
Dimensions
134 × 90 × 220 cm
stroomvoorziening
16A
maximale luchtstroom
3500m3
Vermogen (motor)
4 HP
totale afvalopslag
380 liter
filteroppervlakte
10m2
filter afmetingen
35 x 108 cm (diameter)
Poids
0,05 kg
Diamètre
12,7mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1 kg
Dimensions
41,5 × 32,5 cm
Diamètre
100mm
Poids
0,5 kg
Longueur
4670mm
Largeur
20mm
Dikte
0,80mm
Poids
0,05 kg
Dimensions
0,4 cm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy
