Kit de promotion de la brosseuse Durotec pour le travail du bois. La machine est livrée avec de nombreuses brosses destinées principalement au travail du bois.
En achetant la machine Durotec dans ce set promotionnel, vous économisez jusqu'à 226,25 €.
Voir la VIDEO
Compact but powerful spindle moulder from our comfort line, suitable for use in any small workshop or at home. The machine can be used at four speeds and is driven by a 230V or 400V motor that delivers 3HP. This allows the machine to process a wide range of applications.
Now delivered with free options:- Additional spindle shaft for routers- Aluminium safety guides- Miter guide- Table extension left and right
Wood lubricant for machine surfaces and machine tables. Significantly improves the sliding of wood over machines in steel, cast iron or aluminium. Ideal for planers, routers, saw tables, etc. Also a great efficiency for sliding wood on wood (wooden guides, extension tables, drawers, etc.). Silicone-free. Can be used on all types of wood without leaving marks!
Advantages: does not damage glued joints, increases safety while working, increases quality of finish, leaves no traces.
Can also be used to restore shine to plastic.
La dernière machine à scier Harvey est arrivée en Europe ! Le Harvey Alpha. Cette machine a une nouvelle conception encore plus intelligente, fournie en standard avec le superbe guide d'onglet précis, le Harvey Miter Gauge. d'une valeur de 699 € (hors TVA).
Les scies sur table Harvey Alpha ont déjà prouvé qu'elles étaient l'une des tables de sciage de la plus haute qualité dans le monde entier, avec plus de 30 000 clients satisfaits. Les scies à table se caractérisent par une conception et une ingénierie de pointe, un châssis robuste et un système d'entraînement puissant. Apparence et finition rayonnantes, précision et stabilité exceptionnelles, fonctionnement souple et fonctionnalités conviviales. Cette série comprend une table de sciage classique 3PK inclinable à gauche avec un système avancé de changement de coin de fendage ou une table de sciage à logement en queue d'aronde 5,5PK à usage intensif pour les coupes industrielles. Tous ces modèles sont équipés pour être utilisés avec le système Dado (lames de scie à rainures réglables pour couper les rainure et entre autres).
Turn any drill into a 90° drill with the Kreg 90° Pocket-Hole Driver. With this compact drill attachment, you can tighten screws in places that you cannot reach with your drill.
The included 7.62cm square drill bit has a magnetic tip that clicks into the head of a pocket-hole screw. This attachment is universally applicable, i.e. for all drills and all hexagonal bits. Thanks to its ergonomic design, you can easily hold the Kreg 90° Pocket-Hole turner in place with one hand while operating the drill with the other. It is also suitable for use with an impact drill. When you need to tighten screws in tight spaces, you can count on the Kreg 90° Pocket-Hole turner to get the job done.
Last pieces!
The Job-Saw TT255 is a powerful and compact machine for all carpentry work in the workshop or on the job site. The telescopic extension table goes up to a length of 1030 mm. Equipped with built-in hoover with a large collection bag. Cutting height of 82 mm at 90° and easily tiltable to 45°. Easy to move and with telescopic handle. Width guide with eccentric clamping.
The Kreg Pocket-Hole Jig 520 Pro is a practical and versatile jointing system. This system allows you to create very solid pocket holes in materials with a minimum thickness of 13 mm and a maximum thickness of 38 mm.
The Pocket-Hole Jig 520 Pro has a number of unique points. For example, the jig has a 360° rotatable handle. This handle ensures that you can comfortably use the system on any project. In addition, the Pocket-Hole Jig 520 Pro has a built-in clamping system. You simply squeeze the handle until the material is clamped firmly enough. The non-slip material on the 520 Pro ensures that the jointing system will not shift, no matter what position you use the jig in. You can measure the thickness of the material with the supplied material thickness gauge.
Reducer fitting to be used with the different models of Air Flux Dust extractors. Can be cut off on the appropriate diameter.
OUTLET, packaging slightly damaged
The Timber Yard Pro TT315 is a powerful table saw with a 4 hp induction motor and carbide saw blade, which is equipped with a miter guide and a galvanised worktable.
Four part reducer up to diameter 100mm to be used with the different models of Air Flux Dust extractors.
Belt sander with extra powerful three-phase motor for levelling and rough work. Thanks to this powerful engine, the machine will not let you down even on the toughest jobs. The AF11 sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. With connection for dust extraction.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece. What's more, thanks to the induction motor, this model is up to 40% quieter than comparable models and delivers up to 30% more power.
Promotiepakket van Triple Major TT310 inclusief afzuiginstallatie, afzuigslang, klembanden en steunrol. Krachtige, robuust vlak- en vandiktebank met inductiemotor, geschikt voor elke werkplaats. Deze machine is verkrijgbaar met een motor op 230V (4PK) of drie fasen 400V (5PK).
The length of this bit is 140mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers.
Sanding sleeve 50 x 140 mm for Spindle Sander TT140
Mèches pour mortaiser avec brise - copeaux, disponible à coupe gauche ou droite. Les mèches sont approprié pour faire des travaux de mortaisage dans le plupart de types de bois. Les mèches ont deux faces à couper avec brise-copeaux.
Cette set consiste de mèches de diamètre: 6 - 8 - 10 - 12 - 14 - 16mm. Disponible à coupe gauche ou droite.
Saw blade with 120 teeth
Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise.
Available in different thickness.
Beweegbare bek voor gietijzeren lijmklem Maxipress F, systeem met volledig beschermde schroefdraad
Electrostatic outer filter for the air filtration system Air Filter AF150, which filters up to 98% of all dust particles up to 5 microns.
Lamelles de la marque Virutex, emballées par boîte de 1000 pièces. Faites votre choix pour le numéro 0, 10 ou 20.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Entraîneur autoserrant, diamètre 1"
Beweegbare bek voor op de PIHER Mod. POT klemmen.
Volledig gemaakt uit gesmeed staal.
En utilisant le rail UCP90 (longueur=1400mm), vous coupez avec une stabilité et une précision parfaites. Le rail est compatible avec tous les modèles de scies circulaires, scies sauteuses ou défonceuses Virutex. Créer facilement des coupes, rainures, moulures, etc. parfaitement droites. Livraison standard avec deux systèmes (ventouses ou pinces) pour fixer le rail à la pièce à couper. Les deux ventouses ont une force de fixation élevée et sont idéales pour une utilisation sur toutes les surfaces lisses et non poreuses. Pour les autres surfaces, vous pouvez utiliser les pinces pour fixer le rail à la pièce à travailler via le guide inférieur, même si le rail dépasse le panneau. Equipé d'une protection anti-rayures.
Attention : les défonceuses doivent être placées sur le rail à l'aide d'une fixation. Cette pièce jointe est disponible en option. Pour les coupes plus longues, un rail de 2400 mm ainsi qu'un kit de connexion multirail est disponible.
Promotional package of the band saw machine TT250 including dust collector, extraction hose, clamping bands and roller support. Compact band saw machine equipped with a 230V induction motor with three-wheel system for optimum guidance of the blade.
Content
Kit de promotion de la brosseuse Durotec pour le travail du bois.
Convient pour:
Structurer les surfaces en bois
Vieillissement artificiel du bois
Remise à neuf de vieux meubles
...
Compact but powerful spindle moulder from our comfort line. Suitable for use in every small workshop or at home. The machine can be used at four speeds and is driven by a 230V or 400V motor that delivers 3HP. This allows the machine to handle a wide range of applications. It is suitable for standard milling work, tenoning, rebating and more. Because of the low speed of 1400rpm, this spindle moulder is also suitable for sanding work. The speeds are clearly indicated in the side door with a large viewing window.
With an optional adaptor and collet, router bits can also be used below the table. Collets of both 8-10 and 12 mm are available for this purpose.
The stable cast iron worktable is provided with a T-slot groove and optionally a convenient mitre guide.These T-slots offer many other and safe possibilities such as the use of tenoning jigs and numerous safety pushers (see BOW range). Furthermore, the work table has a stable table extension on the left and right. The safety hood has optional aluminium safety guides, which manually reduce the cutter opening and ensure better guidance, and unique spring-loaded pressure wheels to apply better pressure to the material.
The height adjustment is done with very robust metal handwheels for smooth running and on this shaft there is a clear analogue measurement indicator for precision control.
The safety coil switch is equipped with an extra-large emergency stop.
Optionally available.
Short routing spindle with collet for routers
Alu safety guides
Miter guide
Table extension left and right
Wheelbase
Wood lubricant for machine surfaces and machine tables. Significantly improves the sliding of wood over machines in steel, cast iron or aluminium. Ideal for planers, routers, saw tables, etc. Also a great efficiency for sliding wood on wood (wooden guides, extension tables, drawers, etc.). Silicone-free. Can be used on all types of wood without leaving marks!
Advantages: does not damage glued joints, increases safety while working, increases quality of finish, leaves no traces.
Can also be used to restore shine to plastic.
La dernière machine à scier Harvey est arrivée en Europe ! Le Harvey Alpha. Cette machine a une nouvelle conception encore plus intelligente, fournie en standard avec le superbe guide d'onglet précis, le Harvey Miter Gauge. d'une valeur de 699 € (hors TVA).
Les scies sur table Harvey Alpha ont déjà prouvé qu'elles étaient l'une des tables de sciage de la plus haute qualité dans le monde entier, avec plus de 30 000 clients satisfaits. Les scies à table se caractérisent par une conception et une ingénierie de pointe, un châssis robuste et un système d'entraînement puissant. Apparence et finition rayonnantes, précision et stabilité exceptionnelles, fonctionnement souple et fonctionnalités conviviales. Cette série comprend une table de sciage classique 3PK inclinable à gauche avec un système avancé de changement de coin de fendage ou une table de sciage à logement en queue d'aronde 5,5PK à usage intensif pour les coupes industrielles. Tous ces modèles sont équipés pour être utilisés avec le système Dado (lames de scie à rainures réglables pour couper les rainure et entre autres).
Turn any drill into a 90° drill with the Kreg 90° Pocket-Hole Driver. With this compact drill attachment, you can tighten screws in places that you cannot reach with your drill.
The included 7.62cm square drill bit has a magnetic tip that clicks into the head of a pocket-hole screw. This attachment is universally applicable, i.e. for all drills and all hexagonal bits. Thanks to its ergonomic design, you can easily hold the Kreg 90° Pocket-Hole turner in place with one hand while operating the drill with the other. It is also suitable for use with an impact drill. When you need to tighten screws in tight spaces, you can count on the Kreg 90° Pocket-Hole turner to get the job done.
The Job-Saw TT255 is a powerful and compact machine for all carpentry work in the workshop or on the job site. The telescopic extension table goes up to a length of 1030 mm. Equipped with built-in extractor with a large collection bag. Cutting height of 82 mm at 90° and easily tiltable to 45°. Easy to move and with telescopic handle. Width guide with eccentric clamping.
The Kreg Pocket-Hole Jig 520 Pro is a practical and versatile jointing system. This system allows you to create very solid pocket holes in materials with a minimum thickness of 13 mm and a maximum thickness of 38 mm.
The Pocket-Hole Jig 520 Pro has a number of unique points. For example, the jig has a 360° rotatable handle. This handle ensures that you can comfortably use the system on any project. In addition, the Pocket-Hole Jig 520 Pro has a built-in clamping system. You simply squeeze the handle until the material is clamped firmly enough. The non-slip material on the 520 Pro ensures that the jointing system will not shift, no matter what position you use the jig in.
You can measure the thickness of the material with the supplied material thickness gauge. The measurements on the gauge correspond to those on the drilling jig and EasySet drill bit. You slide the stop collar to the correct size using the material thickness gauge, which is also a hex wrench. This adjustable stop collar ensures repeat accuracy of the Kreg jointing system. By setting the stop collar once, you can thus make several pocket holes in succession in the same material thickness.
The built-in clamping system provides more repeat accuracy as well. The handle has a quick-reset function, which ensures that the clamp remains at approximately the same thickness. This allows you to work with material of the same thickness several times in a row, without having to squeeze the handle several times.
The Kreg Pocket-Hole Jig 520 Pro comes with no less than 100 pocket hole screws and a step-by-step project plan. The Kreg jointing system also comes with a 51 mm Kreg quick-release clamp, for clamping and assembling your workpiece.
Reducer fitting to be used with the different models of Air Flux Dust extractors. Can be cut off on the appropriate diameter.
The Timber Boy TT315 is a powerful table saw with a powerful 4 hp induction motor. It is equipped with a miter guide with eccentric clamping and a galvanized work table and comes standard with an extension table (also galvanized), handles and wheels, making it ideally suited for prolonged outdoor use. The tungsten carbide saw blade has a diameter of 315 mm and a bore of 30 mm and can be tilted 45° with the convenient controls.
The legs of the base can be folded in in no time, so the machine can be easily transported in a passenger car.
Four part reducer up to diameter 100mm to be used with the different models of Air Flux Dust extractors.
Belt sander with extra powerful three-phase motor for levelling and rough work. Thanks to this powerful engine, the machine will not let you down even on the toughest jobs. The AF11 sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. The machine is equipped with stoppers in high quality carbide (widia) to prevent wear and tear on the housing. Equipped with a connection for dust extraction to allow the user to work comfortably and cleanly. Several sanding belts with different grit sizes are optionally available.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece. What's more, thanks to the induction motor, this model is up to 40% quieter than comparable models and delivers up to 30% more power.
Promotiepakket van Triple Major TT310 inclusief afzuiginstallatie, afzuigslang, klembanden en steunrol. Krachtige, robuust vlak- en vandiktebank met inductiemotor, geschikt voor elke werkplaats. Deze machine is verkrijgbaar met een motor op 230V (4PK) of drie fasen 400V (5PK).
The length of this bit is 140mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers.
Sanding sleeve 50 x 140 mm for Spindle Sander TT140
Available in grit 80 - 100 - 120
Sold per 3 pieces
Mèches pour mortaiser avec brise - copeaux, disponible à coupe gauche ou droite. Les mèches sont approprié pour faire des travaux de mortaisage dans le plupart de types de bois. Les mèches ont deux faces à couper avec brise-copeaux.
Disponible à coupe gauche ou droite. Ce set de mèches consiste de diamètre: 6mm - 8mm - 10mm - 12mm - 14mm - 16mm.
Saw blade with 120 teeth
Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise.
Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available in different thickness.
Beweegbare bek voor klem Maxipress F
Electrostatic outer filter for the air filtration system Air Filter AF150. It filters up to 98 % of all dust particles up to 5 microns.
Lamelles de la marque Virutex, emballées par boîte de 1000 pièces. Faites votre choix pour le numéro 0, 10 ou 20.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Entraîneur autoserrant, diamètre 1"
Beweegbare bek voor op de PIHER Mod. POT klemmen.
Volledig gemaakt uit gesmeed staal.
En utilisant le rail UCP90 (longueur=1400mm), vous coupez avec une stabilité et une précision parfaites. Le rail est compatible avec tous les modèles de scies circulaires, scies sauteuses ou défonceuses Virutex. Créer facilement des coupes, rainures, moulures, etc. parfaitement droites. Livraison standard avec deux systèmes (ventouses ou pinces) pour fixer le rail à la pièce à couper. Les deux ventouses ont une force de fixation élevée et sont idéales pour une utilisation sur toutes les surfaces lisses et non poreuses. Pour les autres surfaces, vous pouvez utiliser les pinces pour fixer le rail à la pièce à travailler via le guide inférieur, même si le rail dépasse le panneau. Equipé d'une protection anti-rayures.
Attention : les défonceuses doivent être placées sur le rail à l'aide d'une fixation. Cette pièce jointe est disponible en option. Pour les coupes plus longues, un rail de 2400 mm ainsi qu'un kit de connexion multirail est disponible.
Promotional package of the band saw machine TT250 including dust collector, extraction hose, clamping bands and roller support. Compact band saw machine equipped with a 230V induction motor with three-wheel system for optimum guidance of the blade.
Weight
6 kg
110 kg
1 kg
240 kg
ND
36 kg
2 kg
0,5 kg
48 kg
0,5 kg
9,7 kg
320 kg
0,05 kg
0,05 kg
ND
1 kg
0,93 kg
1 kg
1 kg
0,05 kg
ND
1,2 kg
1 kg
70 kg
Dimensions
ND
ND
ND
ND
ND
ND
ND
ND
940 × 660 × 470 cm
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
140 cm
ND
Additional information
Poids
6 kg
Puissance
800W
RPM Min-Max
1200-3900
Poids
110 kg
Moteur
3 CV
Voltage
230 V, 3 x 400V
Diamètre de l\' arbre
30 mm
Nominale snelheid
1400 rpm, 4000 rpm, 6000 rpm, 9000 rpm
Freesopening
160 mm
Hauteur de rainure
110 mm
Table de travail
620 x 510 mm
Poids
1 kg
Poids
240 kg
Voltage
230 V, 3 x 400V
Moteur
3 CV, 5.5 CV
Diamètre lame de scie
250mm
Profondeur de coupe 45°
50mm
Profondeur de coupe 90 °
70mm
Vitesse de la lame de scie
4150
Max. largeur DADO
15mm
Connexion d\'extraction
100 mm
Max. largeur à gauche
305 mm
Max. largeur à droite
750 mm
T-slots
2
Hauteur du plan de travail
860mm
Table de travail
508 x 685mm
Poids
36 kg
Poids
2 kg
Schacht boor
6.35 mm
Boordiameter
9.5 mm
Min. materiaaldikte
13 mm
Max. materiaaldikte
38 mm
Poids
0,5 kg
Poids
48 kg
Dimensions
940 × 660 × 470 cm
Alésage
30 mm
Diamètre lame de scie
315mm
Profondeur de coupe 45°
50mm
Profondeur de coupe 90 °
90 mm
Moteur
4 CV
Table de travail
550 x 800 mm
Verlengtafel
450 x 810 mm
Inclinaison
45°
Poids
0,5 kg
Poids
9,7 kg
Puissance
900W
Afmetingen schuurband
690x100mm
Schuuroppervlakte
175x100mm
Bandsnelheid
327m/min
Poids
320 kg
Poids
0,05 kg
Diamètre
10mm
Longueur
140mm
Queue
16x50mm
Sens de rotation
A gauche, A droite
Poids
0,05 kg
Grain
K80, K100, K120
Diamètre
6mm, 8mm, 10mm, 12mm, 14mm, 16mm
Longueur
105mm, 115mm, 125mm, 135mm, 145mm, 155mm
Queue
16x50mm
Sens de rotation
A droite, A gauche
Poids
1 kg
Diamètre lame de scie
500mm
Diamètre de l\' arbre
32mm
Epaisseur dent
4,0mm, 4,6mm
Epaisseur lame de scie
3,2mm, 3,6mm
nombre de dents
120
Orifices de traction
2/11/63
Poids
0,93 kg
Poids
1 kg
Poids
1 kg
Type de lamelle
Nr. 0, Nr. 10, Nr. 20
Poids
0,05 kg
Diamètre
16mm
Longeur de coupe
8mm
Longueur
46mm
Rayon
R1,6
Queue
8mm
Faces de coupe
2
Poids
1,2 kg
Poids
1 kg
Dimensions
140 cm
Poids
70 kg
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy