Le dépoussiéreur Air Flux est conçu pour augmenter la capacité de presque tous les aspirateurs conventionnels et les transformer en un système de dépoussiérage efficace. Le conteneur métallique de 99 litres est doté d'une fenêtre de niveau, de charnières à dégagement rapide et de roulettes. Le séparateur capture la sciure, les copeaux de bois et autres débris avant qu'ils ne pénètrent dans l'aspirateur, évitant ainsi la perte de puissance d'aspiration due à un filtre bouché. La base équipée de cinq roulettes pivotantes lui confère une stabilité exceptionnelle et une grande facilité de manœuvre dans l'atelier. Le séparateur de flux d'air crée un flux d'air cyclonique qui sépare la plupart des particules de poussière de bois et autres matériaux plus lourds que l'air, les empêchant ainsi de pénétrer dans l'aspirateur.
Miter gauge of the extra premium class. Finely adjustable flip-stop, machined standard angles, extendable stop extension
If you are looking for accessories for your saw table or router table from the "uncompromising" category, you have just found it!
The ITAMAC Xact 36 definitely belongs in the "non-plus-ultra class" in terms of adjustability, precision, stability and finish. Absolutely unrivalled miter gauge!
The narrow nylon brush Duro-Nyl is the ideal solution for hard-to-reach areas. This brush is made in grit 60.
These brushes should always be used in combination with the spacer ring Duro-Spacer. This is an aluminium spacer ring to fit the unique narrow brush on your Durotec structuring machine.
The Kreg Multi-Mark adjustable square square, also called block square, has a plastic block. This block contains a spirit level and the ruler can be slid onto the block, which is provided with a measurement on both sides: one side in millimeters, the other side in inches. The metric side has a graduation on one side that starts at 0 and runs to 152 mm, the other side starts at 152 mm and continues to 304 mm.
The Multi-Mark is a measuring tool that can be used in various ways; as spirit level, adjustable block hook, depth gauge, but also, for example, for adjusting the height of saw blades or router bits and cutterheads.
With the square you can measure and mark angles of 90º, but also set it obliquely like a double square. Handy for transferring an angle when measuring and marking.
Les dents de cette lame de scie sont aiguisé en forme de V (45°) pour facilement et rapidement faire des rainures dans votre lambris. Sur demande, les dents peut être aussi aiguiser en différents formes/angles ou avec des épaisseurs différents.
Lame de scie pour rainues avec denture widia en forme V pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Itamac investeert mee in uw gezondheid: U ontvangt een korting van 30% op de Orca S-17 zwevende stofafzuigkap voor efficiënte stofafzuiging en betere gezondheid bij aankoop van elke Panthera tafelzaag!
De Itamac Panthera serie biedt hoogwaardige en veilige tafelzagen voor nauwkeurige zaagsneden. De HW110SE serie beschikt over een krachtig poly-belt aandrijfsysteem en een zware zwaluwstaart motorbehuizing, wat zorgt voor een trillingsvrije en nauwkeurige zaagtafel. De Panthera serie is verkrijgbaar in 230V-3PK (S7 model), driefase 400V-5.5PK en zelfs een éénfase 230V-4PK (S9 model). Itamac is de enige fabrikant die dit type tafelzaag in éénfase aanbiedt met een 4 PK motor. De gestandaardiseerde T-slots maken precieze sneden mogelijk met de meegeleverde verstekgeleider.
Standaard geleverd met “BOW” Feather PRO aandrukveren die de controle vergroten en terugslag verminderen én hoogwaardige zaagbladen van Sistemi Klein (made in Italy) voor stabiliteit, vermindering van trillingen en een langere levensduur.
BEKIJK MEER INFORMATIE IN ONDERSTAANDE COMPLETE BESCHRIJVING
Bande à poncer pour ponceuse TT2515 - 2515 x 152 mm
Etabli en hêtre massif avec une surface de travail de 80 mm d'épaisseur. L'établi a été développé spécifiquement pour être utilisé dans les écoles. À cet effet, l'établi est équipé de quatre postes de travail, chacun avec un étau. L'ensemble de l'établi est déjà huilé à la livraison. L'ensemble standard de cet établi comprend quatre paires de poteau cylindrique (Ø19mm) en acier plein. Hauteur de travail fixe de 700 mm, idéale pour les enfants ou les adolescents. Les établis de la série School sont également disponibles avec une base métallique réglable en hauteur.
Sur demande, cet établi est également disponible pour les gauchers. Veuillez nous le faire savoir lorsque vous passez votre commande afin que nous puissions vous fournir un établi personnalisé.
Sanding disc for sander TT915 - Diameter 150 mm
DEMO MODEL
Manual edgebander for edgebanding pre-glued PVC, melamine or veneer to panels. The special design with adjustable clamps on both sides of the panel ensures high precision and great stability. The machine offers the possibility of surface gluing or with an excess on both sides. Setup time: less than a minute. This edgebander can be used on flat, concave or convex workpieces. With the help of a practical cutting system, it is easy to trim edges. Maximum thickness and width of the edge bands is 1x50mm.
La presseur peigne BOW FencePRO se caractérise par l'utilisation innovante de mousse EVA haute densité, de peignes en mousse et d'un système de serrage qui augmente le contrôle de l'entrée, améliore considérablement le recul et protège mieux votre bois contre les dommages. Ceci par rapport aux clips à ressort en plastique généraux. L'EVA est un matériau à cellules fermées haute densité avec une longue durée de vie que vous n'avez pas avec les clips à ressort en plastique courants. Les ressorts sont également incassables et, contrairement aux ressorts en plastique, ils peuvent être remplacés s'ils sont endommagés.
Jeu de deux, y compris le matériel de fixation.
Verleng aanzienlijk de levensduur van uw draagbare of stationaire kantenlijmer. De Virutex Cantspray is een antikleefstof spray zonder siliconen. Geschikt om alle bewegende onderdelen in uw kantenlijmmachine te behandelen en lijmophoping te voorkomen. Aangeraden om zowel voor als na gebruik de Virutex Cantspray aan te brengen.
Deze set van twee magnetische aluminium drukplaten vervangen de originele drukplaten op je Piher bankschroef. Wanneer je originele magnetische drukplaten moeten vervangen worden door slijtage monteer je snel en makkelijk deze vervangende set.
Kies de bekbreedte van je bankschroef om de correcte magnetische aluminium drukplaten te kiezen.
Saw blade with 36 teeth
Saw blade with flat teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Made in Germany, take advantage of the extremely solid German quality.
BOW push stick made of PA, high density EVA foam grip: reversible and replaceable.
Promoset van de Durotec structuur borstelmachine voor houtbewerking. De machine wordt geleverd inclusief tal van borstels voornamelijk gericht op houtbewerking.
Door de aankoop van de Durotec-machine in deze promoset bespaart u maar liefst € 226,25.
Bekijk de VIDEO
The length of this bit is 130mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers.
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in high quality carbide (widia) with diameter Ø500mm and an induction motor of 3.5 HP. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 180mm. Ergonomic and easy to operate, with automatic return unit.
Fully assembled on delivery and ready to use.
Sanding disc for sander TT1220 - diameter 255 mm
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
Fraise à chanfreiner combinée à 2 coupes qui rend possible couper, affleurer et chanfreiner chaque type de laminé sans changer votre outil. Le face à couper est plat et sous angle de 45°. Appropriés aussi pour des travaux simples sur bois tendre et dur.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
Adapter ring to reduce the bore of your saw blade to comply with your machine. Make sure every saw blade is compatible with your own machine thanks to these convenient reduction rings.
Reduction from bore 35mm to 26mm.
This spacer ring is designed for the use of the narrow nylon brush on the Durotec structuring/brushing machine. Narrow brushes are the ideal solution for hard-to-reach areas.
Double outlet Ø125mm to be used with Air Flux Cyclone Dust Extractors. The large diameter measures 203mm, which can be mounted on the cyclone dust extractors, with branching to 2x125mm.
READYtoWORK pakket van paneelzaag ITAMAC Maestro X7 3200mm inclusief afzuiginstallatie, afzuigslang, klembanden, montageklemmen etc. en set van hoofdzaagblad en voorritser voor afwerking plaatmateriaal. Formaatzagen met brede geanodiseerde aluminium roltafel op dubbele slijtvaste staafgeleiding met vervangbare rollers. Voorzien van een ingebouwde module start/stop systeem welke garant staat voor een optimaal gebruikscomfort.
Cette ventouse a un corps en plastique solide en ABS. Il a une capacité de chargement de 20 kg. Comprend une housse de protection. Peut être utilisé d'une seule main.
Universeel links-rechts getand zaagblad met 48 tanden geschikt voor het verzagen van verschillende houtsoorten, gelamineerde materialen, dubbelzijdig fineerplaten of spaanplaten in stapel.
Powerful rotary orbital sander for high quality sanding and polishing on both wood and metal. This machine combines a double movement, the sanding pad moves both orbital and rotary orbital. Thanks to the double movement during sanding, you always get a smooth surface without scratching your workpiece. Thanks to a 900W motor, this model is the most powerful sander if its type on the market. The handle at the front of the machine can be placed to the left or right of the machine. This allows both left and right-handers to work comfortably with this sander.
As standard, this sander is fitted with an integrated dust extractor and dust bag. Including soft PU sanding pad (Ø150mm) with velcro.
Thanks to the grain distribution in the fleece, the DuroGrind offers a longer service life. The constant grit ensures an even sanding pattern. Equipped with elastic nylon fleece with granules, it is ideal for shadow-free matting, satinising and polishing of stainless steel and non-ferrous metals. It removes staining after welding stainless steel, light deburring and light oxidation. In addition, it can be used on wood to smooth surfaces. With a maximum speed of 5,600 /min and a recommended speed of 2,900 /min, it is suitable for both wet and dry use
Available in different grain sizes.
Tube translucide avec poignée et vane d'arrêt pour utilisation avec les aspirateurs de marque Air Flux. Utilisez le Clean-Up Kit pour nettoyer votre atelier et pour aspirer le poussière et coupeaux de bois restant.
Un outil indispensable pour tout bricoleur. Un multi-outil avec lequel vous pouvez tout faire. Cette meuleuse d'angle (puissance 2300W) est parfaitement adaptée aux travaux de meulage lourds. Il est alimenté par le réseau électrique. La meuleuse d'angle peut être utilisée pour couper le métal, le bois et la pierre, mais vous pouvez également l'utiliser pour enlever la rouille et écailler le métal.
Lame de scie avec 64 dents
Lame de scie 'Xtra Cut' avec denture plate/trapézoïdale (FZ/TR) 5° négatif. Cette lame de scie est approprié pour la découpe d'aluminium plein, PVC et des métaux non-ferreux. À utiliser sur scie à table. Ce lame vous offre une bonne finition et longue durée de coupe. Silencieuses, antibruit avec une résine spéciale insérée dans les fentes de silence pour une plus grande stabilité et une considérable réduction des vibrations pendant l'usinage. Silencieuses
Connector 45° with diameter 100mm to be used in combination with the Air Flux dust extraction systems.
Bandsaw blade with length 2240mm for use on the TT312 band saw machine from Tendotools. This saw blade has 6 TPI (teeth per inch) and has a width of 6mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
Ce support multiréglable pour tours à bois peut être réglé en hauteur et en largeur de 603 mm à 901 mm.
Wheeled saw cart (outfeed) for Timber Yard Champ TT400TX.
OUTLET | Showroom model, without cover plate
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in high quality carbide (widia) with diameter Ø500mm and an induction motor of 3.5 HP. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 180mm. Ergonomic and easy to operate, with automatic return unit. Fully assembled on delivery and ready to use.
Etabli en hêtre massif avec une surface de travail de 120 mm d'épaisseur. L'établi idéal pour le professionnel ou pour votre atelier à domicile. L'établi est équipé en standard de deux étaux en fonte Bench11 avec la possibilité d'en installer un troisième (Bench 11Q). L'ensemble de l'établi est déjà huilé à la livraison. L'ensemble standard de cet établi comprend une paire de poteau cylindrique (Ø19mm) en acier plein. Hauteur de travail fixe de 900 mm. Des armoires de rangement sur mesure pour le montage dans le châssis sont disponibles séparément.
Disque à poncer pour ponceuse TT1220 - diamètre 255 mm
Cette perceuse Multi Driller est la solution abordable pour vos perçages multibroches et vos charnières d'armoire, avec une opération pneumatique ! La machine est équipée d'un puissant moteur à induction avec un module multibroches de 5 trous à la fois à opération pneumatique.
Raccord en coude 90° et diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux.
Elleboogstuk met hoek van 90° en diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen.
De robustes poteaux cylindrique en acier à utiliser sur les établis de Pinie. Les poteaux sont munis d'un système de ressort pour se sécuriser dans les trous de l'établi. La longueur totale du poteau est de 100 mm, vendu par paire.
Powerful belt sander for levelling and rough work. The LB31E sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. The machine is equipped with stoppers in high quality carbide (widia) to prevent wear and tear on the housing.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece.
Also available with integrated dust extractor and dust bag as model LB31EA.
Lame de scie 'Xtra Cut' avec denture plate/trapézoïdale (FZ/TR) 5° négatif. Cette lame de scie est approprié pour la découpe d'aluminium plein, PVC et des métaux non-ferreux. À utiliser sur scie à table. Ce lame vous offre une bonne finition et longue durée de coupe. Silencieuses, antibruit avec une résine spéciale insérée dans les fentes de silence pour une plus grande stabilité et une considérable réduction des vibrations pendant l'usinage. Silencieuses
Disponsible avec plusieurs nombres de dents.
Cet jeux de protecteurs en pvc peut être utilisé sur les serre-joints Mod M, MM ou Maxipress M.
Le plastique est exempt d'huile et ne laisse donc pas de taches sur votre pièce.
Cette table à vide électrique sur pied basculant est conçue pour serrer des pièces lisses et non poreuses. Pour que la table soit à vide, elle doit être connectée au système de fixation électrique à vide SVE600 de Virutex (inclus en standard). Grâce à sa taille compacte, cette table à vide peut être utilisée aussi bien dans l'atelier qu'à l'extérieur. La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. De plus, la plaque supérieure peut être tournée à 360°. Le support doit être fixé à l'aide de pinces (non comprises).
En utilisant les joints en caoutchouc fournis en standard, vous pouvez facilement diviser le tableau en sections plus petites. Livraison standard avec un joint en caoutchouc déjà installé et un tube transparent pour l'alimentation en air avec un raccord rapide de 1/4".
Move large panels in an ergonomic way with the Kreg Plate carrier. Clamp, lift and go! Carrying large plates becomes easier. You can move sheets yourself without any extra effort or risk of damaging the material. Simply slide the large pads over the panel and lift the lever to clamp and automatically adjust to the material thickness. The pads are coated with Kreg GripMaxx™ to ensure a strong, secure grip without damage, dents or marks. Even on fragile plywood veneer.
The ergonomic handle has thick, durable padding, which makes carrying the plates comfortable. Moreover, the more you lift the handle, the tighter the pads squeeze to prevent slipping. The panel carrier is a great addition for any project builder.
MODÈLE D'EXPO, y compris la télécommande !
Cet aspirateur est équipé d'un moteur à induction de 2 CV et fournit une capacité d'aspiration de 2270m³/heure. Grâce à l’unité de collecte avec cyclone les particules de bois et la poussière (99,9%) sont séparés avant le flux air passe par le cartouche filtrante. Parce que les particules de bois ne touche pas le ventilateur, un flux d’air optimal et la collecte de la poussière sont toujours garantis. Alors, la poussière est collecté dans un fût métallique avec regard. Ce fût est détachable grâce à une poignée à deux maines et fermeture sur deux côtés. La poussière restante passe par une cartouche filtrante Canister avec nettoyage automatique. Grâce à cette cartouche la poussière entre 0,2µm et 2µm est filtré vers un sac à déchets en PVC.
Saw blade 235x30x24T
For all handheld circular saws :
Hitachi C9U series
Makita DHS900 series
Bosch GKS85 series
Metabo KS85 series
Sanding belt for open-end drum sander TT457M - 2265 x 78 mm
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
Identical to model LRE84H but with electronic speed control. Lightweight and powerful mini orbital sander for polishing and finishing your workpieces. The ergonomic design ensures a perfect grip and comfortable working. All the controls are easily accessible while working. Standard delivery with Delta attachment for sanding hard-to-reach areas such as corners or blinds. The Delta piece is provided with velcro at both top and bottom to attach sandpaper. Optionally, a round sanding plate is also available for this machine. Equipped with an integrated dust extractor and dust bag.
Deze transporthendel is standaard voorzien van een klem waardoor deze hendel geschikt is voor meerdere functies. Inzetbaar als kantenpers, hoekpers of transporthendel. Dankzij het ontwerp in aluminium is deze hendel erg sterk en robuust. De maximale last bedraagt 70kg. Als kantenpers kan u de PC81U zowel gebruiken op rechte panelen, als op holle of bolle panelen. Als hoekpers wordt deze hendel dan weer de ideale tool om bijvoorbeeld kaders te maken. De klem is afneembaar en door de handgreep van positie te veranderen is de PC81U eenvoudig om te bouwen tot transporthendel. Geschikt voor panelen van dikte tussen 0mm en 46mm.
Modèle de salle d'expo
Encolleuse manuelle spécialement conçu pour le collage de grandes surfaces avec des adhésifs vinyliques (blancs). Disponible en deux modèles avec des largeurs de rouleaux et des capacités de conteneurs de colle différentes. Le modèle EM26D est équipé d'un rouleau d'une largeur de 122 mm et d'une capacité de 1 kg. Le plus grand modèle EM126D a un rouleau d'une largeur de 180 mm et une capacité de 1,4 kg. La machine est équipée d'une gâchette sur la poignée pour faciliter l'ouverture et la fermeture du récipient de colle.
Attention : cet encolleuse est livré en standard avec un rouleau en mousse, adapté aux adhésifs vinyliques (blanches) et aux adhésifs à base d'eau. Pour les adhésifs synthétiques, un rouleau de PU est disponible en option (réf. 2504065). Cette encolleuse est également disponible avec un rouleau de colle supplémentaire en haut pour le collage stationnaire de pièces par le haut (modèle EM25D et EM125T).
The thicknessing unit is an indispensable tool for planing on the Belmash SDM2500 and makes it possible to obtain a workpiece of excellent quality. It has its own cutterblock that is driven via the motor of the SDM2500. With this unit you can plan thickness on the SDM2500 of 5-103mm and a planing width of 250mm.
This transport handle is standard equipped with a clamp which makes this handle suitable for multiple functions. Can be used as an edge press, corner press or transport handle. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. As an edge press you can use the PC81U on straight panels as well as concave or convex panels. As a corner press, this handle becomes the ideal tool for making frames, for example. The clamp is detachable and by changing the position of the handle, the PC81U can easily be converted into a transport handle. Suitable for panels between 0mm and 46mm thick.
OUTLET, packaging slightly damaged
The Timber Yard Pro TT315 is a powerful table saw with a 4 hp induction motor and carbide saw blade, which is equipped with a miter guide and a galvanised worktable.
The length of this bit is 130mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers.
This wheelbase from Belmash is compatible with the Universal 2000, SDM2500, SDMR2500 and SDR2200 machines. Place your Belmash machine at an ideal height and make it mobile.
Bandsaw blade with length 3607mm for use on the TT500X band saw machine from Tendotools. This saw blade has 2 TPI (teeth per inch) and has a width of 32mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
Drill table to fit on the Triple Major TT310 planer thicknesser. Voorzien van kogellagers en eenvoudig met één hand te bedienen dankzij de stuurhendel. Robust table 500x210 mm, suitable for drills with a 16 mm shank. Delivered with drill head
SHOWROOM MODEL 2022
Inclined aluminum rip fence
Fast quick clamping
Double clamping at the front and back of the table
Smooth running guide on nylon pressure points
Quick detachable
Metal and adjustable size indication
Aluminum guide with T-slot
These portable and compact planers and saws 230V are unique on the market. 270mm planing width and 117mm adjustable cutting height in one machine. Equipped with an induction motor 3,5 HP.
The machine is suitable for working with groove cutters. FREE safety pressure system and routing table worth € 150.00.
Mobile base optional
DEMO MODEL, WITH HEIGHT-ADJUSTABLE SAW BLADE
These portable and compact planing and sawing machines 230V are unique on the market and one of a kind. 200mm planing width and 97mm cutting height in one machine. Equipped with an induction motor 2.8 HP.
With this panel pilot bit you can quickly make accurate openings in panels, doors and windows. The V-point plunges easily through the top layers of any panels including laminated materials. The carbide cutting edges cut clean and fast, guaranteeing a perfect finish of your projects. The pilot of the bit will act as a guide.
Straight grinders are ideal for grinding jobs in hard-to-reach places. Sparky's straight grinder is light and compact, which makes it easy to handle. The straight grinder is connected to the mains. This model lends itself perfectly to milling, polishing and engraving. Indispensable for precision work.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Ventouse robuste pour surfaces convexes et plates avec une capacité de charge de 120 kg. Équipé d'une pompe en plastique solide avec indicateur ABS. Bouton de décompression instantanée Cette ventouse est livrée avec un étui de transport et une housse de protection.
Fraise à double rayon classique pour réaliser de belles arêtes nettes sur des armoires, des portes, des tiroirs ou d'autres meubles. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois.
Sanding sleeve 35 x 140 mm for Spindle Sander TT140
Buizen zijn efficiënter dan slang voor stofopvang over lange afstanden. Deze doorzichtige plastic buis is verkrijgbaar in lengtes van 100 cm om uw stofverzameling van punt A naar punt B te krijgen. Gebruik 100 mm afzuigslang of koppeling (art. 3DU1070) om buizen samen te voegen, of om de buis aan te sluiten op andere 100mm accessoires.
Patin spécial pour installation de parquet et travaux dans les espaces étroits. Support de PA et points de pression en acier.
À utiliser avec PIHER Quick presse une main.
UITVERKOOP
Werkbank gemaakt uit Duitse beuk. Zwaluwstaart verlijmd.
135x135x74 cm
Duitse beuk
4 bankvijzen
Zwaluwstaart verlijmd
Biedt plaats voor vier personen
This powerful diamond wall cutter is designed for pulling trenches for power lines. The device is equipped with high-quality electronics with overload protection. At the same time, a current limitation was provided when the device was started up. This enhances safe and proper use. Furthermore, the desired milling width can be set quickly and dust extraction is provided, which makes working considerably easier.
Le tremplin True-FLEX™ doit son nom à sa conception méticuleusement élaborée. La planche à ressort True-FLEX™ exerce une pression constante et optimale, et résistera à des années d'utilisation intensive dans votre atelier de menuiserie. Le tremplin est fabriqué en plastique composite extrêmement durable et possède un système Wedge-Lock™ qui permet de le fixer à divers outils sans matériel supplémentaire. Que vous utilisiez une rainure d'onglet ou en T, que vous travailliez sur une scie à table ou une table de défonceuse, le système Wedge-Lock™ s'adapte pour que vous puissiez travailler en toute confiance. Utilisés ensemble, ils offrent un support supplémentaire pour les pièces de grande taille. Cela vous permet de travailler avec encore plus de précision.
The Belmash RS-02 is invaluable when working with longer pieces of wood than the work table can support. This roller support provides a safe and easy way to work with these oversized pieces. Easy and convenient to use. Equipped with Teflon rollers to prevent damage to your workpiece. Height adjustable between 700mm and 1050mm.
Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise.
Available with different number of teeth.
Grâce à son support en oxyde d'aluminium brun et lin, le DuroFlap offre une finition homogène et de haute qualité lorsqu'il est utilisé sur l'acier, l'acier inoxydable et les métaux non ferreux.
Disponible dans différentes tailles de grains.
Ces raboteuses et scies portables et compactes 230V sont uniques sur le marché. Largeur de rabotage de 200 mm et hauteur de coupe de 97 mm dans une seule machine. Equipé d'un moteur à induction de 2,8 CV.
Verplaatst grote panelen op een ergonomische manier met de Kreg Platendrager. Klemmen, optillen en wegwezen! Het dragen van grote platen wordt makkelijker. U kan platen zelf verplaatsen zonder extra inspanning of risico op beschadiging van het materiaal. Schuif gewoon de grote pads over het paneel en til de hendel op om het vast te klemmen en automatisch aan te passen aan de materiaaldikte. De pads zijn bekleed met Kreg GripMaxx™ om een sterke, veilige grip te garanderen zonder beschadigingen, deuken of vlekken. Zélfs op kwetsbaar multiplex fineer.
De ergonomische handgreep heeft een dikke, duurzame vulling, dit maakt het dragen van de platen aangenaam. Bovendien, hoe meer u de handgreep optilt, hoe strakker de kussentjes knijpen om wegglijden te voorkomen. De paneeldrager is een geweldige aanvulling voor elke projectbouwer.
Bandsaw blade with length 3607mm for use on the TT500X band saw machine from Tendotools. This saw blade has 4 TPI (teeth per inch) and has a width of 13, 16 or 20mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth. Thickness of 0,80mm, the saw ribbon of 13mm has a thickness of 0,65mm.
Last pieces!
The Job-Saw TT255 is a powerful and compact machine for all carpentry work in the workshop or on the job site. The telescopic extension table goes up to a length of 1030 mm. Equipped with built-in hoover with a large collection bag. Cutting height of 82 mm at 90° and easily tiltable to 45°. Easy to move and with telescopic handle. Width guide with eccentric clamping.
SHOWROOM MODEL, old colours 2022
The Air Flux3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Afsluitschuif met diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. Voorzien aan een zijde van schroefdraad voor de flexibele afzuigslang en aan andere zijde van quick aansluiting die past op andere PVC accessoires van Ø 100 mm.
Double ventouse sur un corps fixe. Corps en alliage d'aluminium solide. Comprend une housse de protection. Utilisation à une main. Cette ventouse a une capacité de charge de 60 kg.
Blast gate diameter 100mm to be used with the Air Flux dust extractors. Threaded on one side for the flexible extraction hose and on the other side with a quick connection that fits other PVC accessories of Ø 100 mm.
Content
Le dépoussiéreur Air Flux est conçu pour augmenter la capacité de presque tous les aspirateurs conventionnels et les transformer en un système de dépoussiérage efficace. Le conteneur métallique de 99 litres est doté d'une fenêtre de niveau, de charnières à dégagement rapide et de roulettes. Le séparateur capture la sciure, les copeaux de bois et autres débris avant qu'ils ne pénètrent dans l'aspirateur, évitant ainsi la perte de puissance d'aspiration due à un filtre bouché. La base équipée de cinq roulettes pivotantes lui confère une stabilité exceptionnelle et une grande facilité de manœuvre dans l'atelier. Le séparateur de flux d'air crée un flux d'air cyclonique qui sépare la plupart des particules de poussière de bois et autres matériaux plus lourds que l'air, les empêchant ainsi de pénétrer dans l'aspirateur.
Miter gauge of the extra premium class. Finely adjustable flip-stop, machined standard angles, extendable stop extension
If you are looking for accessories for your saw table or router table from the "uncompromising" category, you have just found it!
The ITAMAC Xact 36 definitely belongs in the "non-plus-ultra class" in terms of adjustability, precision, stability and finish. Absolutely unrivalled miter gauge!
DURONYL nylon brush for texturing wooden surfaces. The characteristic wood structure is brought to the fore by working with the brush. The brushes mainly remove the softer wood of the more recent annual rings and leave the harder wood of the older annual rings intact. Brushed wooden surfaces are used, among other things, in the manufacture of rustic furniture, the furnishing of rustic cafés and restaurants (wall and ceiling coverings) or for beams.
The Kreg Multi-Mark adjustable square square, also called block square, has a plastic block. This block contains a spirit level and the ruler can be slid onto the block, which is provided with a measurement on both sides: one side in millimeters, the other side in inches. The metric side has a graduation on one side that starts at 0 and runs to 152 mm, the other side starts at 152 mm and continues to 304 mm.
The Multi-Mark is a measuring tool that can be used in various ways; as spirit level, adjustable block hook, depth gauge, but also, for example, for adjusting the height of saw blades or router bits and cutterheads.
With the square you can measure and mark angles of 90º, but also set it obliquely like a double square. Handy for transferring an angle when measuring and marking.
Les dents de cette lame de scie sont aiguisé en forme de V (45°) pour facilement et rapidement faire des rainures dans votre lambris. Sur demande, les dents peut être aussi aiguiser en différents formes/angles ou avec des épaisseurs différents.
Lame de scie pour rainues avec denture widia en forme V pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
De HW110SE tafelzagen van de Harvest-group hebben zichzelf al jaren bewezen als een van de hoogste kwaliteit zaagtafels ter wereld. Deze tafelzagen overtreffen alle verwachtingen op het gebied van gebruiksvriendelijkheid, veiligheid en uiterlijk. De precisie-geslepen gietijzeren werktafels, heavy duty zwaluwstaartbehuizing van de motor en krachtige poly-belt aandrijvingssysteem maken de HW110SE serie een trillingsarme machine waarmee u preciezer dan ooit tevoren kunt zagen!
Veiligheid en precisie
Itamac maakt gebruik van hoogwaardige en zeer krachtige, geruisloze inductiemotoren voor al hun series. De Panthera S7-serie is verkrijgbaar in 230V – 3PK, terwijl de Panthera S9-serie beschikbaar is in zowel drie fase 400V – 5,5PK als monofase 230V – 4PK. Itamac onderscheidt zich als enige fabrikant die dit type zaagtafel aanbiedt op monofase met een krachtige 4 PK motor. Zo ben je verzekerd van voldoende kracht om moeiteloos door het materiaal heen te zagen, ongeacht de serie die je kiest.
Veiligheid en precisie zijn gegarandeerd met de Itamac Panthera series. De tafelzagen zijn voorzien van gestandaardiseerde T-slots links en rechts van het zaagblad waar men met de meegeleverde verstekgeleider met aanslag en instelbare posities zeer nauwkeurig kan werken. Voor zuiver werken en optimale veiligheid zijn bij de Panthera series de “BOW” Feather PRO aandrukkers standaard inbegrepen: een veerklemplaat met vervangbare veren in EVA schuim die de controle op de inbreng verhogen, de terugslag drastisch verminderen en je hout beter beschermt tegen schade.
Maar, zelfs bij de beste accu schroefmachine hoort de juiste schroefbit:
Daarom worden de Panthera zaagtafelsstandaard geleverd met zeer hoogwaardige zaagbladen: één schulpzaagblad Itamac en één precisie afwerking zaagblad Xtra Cut van Sistemi Klein, Made in Italy. Deze zaagbladen tillen het zagen naar een nieuw niveau door de speciale kunsthars gevuld in de sleuven, die zorgt voor een ongekende stabiliteit en vermindering van trillingen. Dit zaagblad is uitermate geschikt voor het zagen van hardhout, dubbelzijdig fineer, laminaat, MDF en thermoplastische platen. Het is zelfs ideaal voor het bewerken van ALUCOBOND® of DIBOND®. Deze zaagbladen zijn uitgerust met hardmetalen tanden van het originele Ceratizit micrograin carbide, wat resulteert in een levensduur die tot wel 30% langer is.
Stofafvoer en uw gezondheid
Stofafvoer en uw gezondheid spelen ook een belangrijke rol. Op zaagtafels met snelwissel of wegname van de splijtwig voor groefsnedes/werken met dado zaagbladen komt het grootste deel van het stof boven het werkblad vrij. Zonder splijtwig is er geen mogelijkheid voor het plaatsen van een stofbeschermkap. Itamac heeft daarom de bovenarm zwevende afvoerkap “ORCA S-17” ontwikkeld. De transparante beschermkap is makkelijk in hoogte verstelbaar en heeft een Ø 100 mm aansluiting voor efficiënte afzuiging. Deze grote aansluiting zorgt voor optimale zuigkracht zonder verlies van luchtsnelheid, in tegenstelling tot alle andere beschermkapjes met een kleine diameter. Ook zorgen de grote transparante oppervlakken van de beschermkap ervoor dat je altijd een volledig zicht hebt op je werkstuk, waardoor je veiliger en preciezer kunt werken in vergelijking met een klein beschermkapje dat vaak het werken belemmert.
ITAMAC investeert mee in uw gezondheid:
Hoewel met deze zaagtafels vaak zonder splijtwig gewerkt wordt, is het toch zeer belangrijk om stofopvang serieus te nemen. Precies om deze reden biedt ITAMAC een korting van 30% op de Orca S-17 bovenarm zwevende afvoerkap bij de aankoop van élke Panthera zaagtafel. Het is belangrijk om te beseffen dat houtstof net zo schadelijk kan zijn als andere soorten stof, dus een goede stofafzuiging is van groot belang voor een veilige en gezonde werkomgeving.
De inlegplaat van de zaagtafel is ontworpen voor gebruik onder elke zaaghoek en kan gemakkelijk worden verwijderd dankzij de magnetische bevestiging in de tafel. Door middel van fijnafstelling kan deze plaat ook worden aangepast voor een 100% vlakke overgang met het gietijzeren tafelblad.
Het zaagblad kan worden gekanteld van 45° tot -3° voor valse verstekken en kantelt tevens naar links voor beter zicht en geen kans op terugslag wegens blokkering van het werkstuk. De tafelzaag heeft ook een snelwisselsysteem voor het splijtwig en is geschikt voor gebruik met Dado groefzagen (verstelbare groefzaagbladen voor het inzagen van groeven tot + 20 mm).
De bediening van de zaagtafel is eenvoudig en gebruiksvriendelijk. De handwielen zijn vol metaal en zwaar, en de industriële overbrenging zorgt voor een soepele werking van zowel de zaaghoogte als de kanteling van het zaagblad. De hoogte- en verstekinstelling gaan twee keer zo snel als bij een klassiek systeem.
De Master-Rip breedtegeleider is voorzien van teflon geleidingspunten, waardoor deze zeer soepel geleidt en op 6 punten kan worden afgesteld. Daarnaast kan de geleider zowel links als rechts van het zaagblad worden geplaatst. De aanslag kan eenvoudig worden vergrendeld door de hendel naar beneden te drukken en het zware T-profiel zorgt voor een stevige vergrendeling over de volledige lengte. De zaagbreedte kan duidelijk worden afgelezen op de dubbele vergrotingsschalen in zowel millimeters als inches.
Bande à poncer pour ponceuse TT2515.
2515 x 152 mm
Disponible en grain 60 - 80 - 100 - 150
Etabli en hêtre massif avec une surface de travail de 80 mm d'épaisseur. L'établi a été développé spécifiquement pour être utilisé dans les écoles. À cet effet, l'établi est équipé de quatre postes de travail, chacun avec un étau. L'ensemble de l'établi est déjà huilé à la livraison. L'ensemble standard de cet établi comprend quatre paires de poteau cylindrique (Ø19mm) en acier plein. Hauteur de travail fixe de 700 mm, idéale pour les enfants ou les adolescents. Les établis de la série School sont également disponibles avec une base métallique réglable en hauteur.
Sur demande, cet établi est également disponible pour les gauchers. Veuillez nous le faire savoir lorsque vous passez votre commande afin que nous puissions vous fournir un établi personnalisé.
Sanding disc for sander TT915
Diameter 150 mm
Available in grit 60 - 80 - 100 - 120 - 150 - 220
This sanding disc can be used for deburring and sanding steel, aluminum, non-ferrous metals, wood and plastic.
Manual edgebander for edgebanding pre-glued PVC, melamine or veneer to panels. The special design with adjustable clamps on both sides of the panel ensures high precision and great stability. The machine offers the possibility of surface gluing or with an excess on both sides. Setup time: less than a minute. This edgebander can be used on flat, concave or convex workpieces. With the help of a practical cutting system, it is easy to trim edges. Maximum thickness and width of the edge bands is 1x50mm.
La presseur peigne BOW FencePRO se caractérise par l'utilisation innovante de mousse EVA haute densité, de peignes en mousse et d'un système de serrage qui augmente le contrôle de l'entrée, améliore considérablement le recul et protège mieux votre bois contre les dommages. Ceci par rapport aux clips à ressort en plastique généraux. L'EVA est un matériau à cellules fermées haute densité avec une longue durée de vie que vous n'avez pas avec les clips à ressort en plastique courants. Les ressorts sont également incassables et, contrairement aux ressorts en plastique, ils peuvent être remplacés s'ils sont endommagés.
Verleng aanzienlijk de levensduur van uw draagbare of stationaire kantenlijmer. De Virutex Cantspray is een antikleefstof spray zonder siliconen. Geschikt om alle bewegende onderdelen in uw kantenlijmmachine te behandelen en lijmophoping te voorkomen. Aangeraden om zowel voor als na gebruik van uw machine de Virutex Cantspray aan te brengen voor een optimaal resultaat.
Deze set van twee magnetische aluminium drukplaten vervangen de originele drukplaten op je Piher bankschroef. Wanneer je originele magnetische drukplaten moeten vervangen worden door slijtage monteer je snel en makkelijk deze vervangende set.
Kies de bekbreedte van je bankschroef om de correcte magnetische aluminium drukplaten te kiezen.
Saw blade with 36 teeth
Saw blade with flat teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Made in Germany, take advantage of the extremely solid German quality.
The PushPRO Push stick offers an unprecedented safety improvement and innovative new advantages in a tool category that has hardly seen any innovations for years.
With the High Density EVA tips, the PushPRO improves feed control, protects the wood and protects you and your tools in case of accidental contact between the push stick and the saw blade.
The PushPRO prevents the use of plastic to guide the wood. When pressure is applied, plastic can affect the porosity of some woods.
Plastic does not absorb vibrations due to the high-density foam used in the PushPRO. PushPRO provides a better cut than a plastic push stick.
Promoset van de Durotec structuur borstelmachine voor houtbewerking.
Geschikt voor:
Structureren van houten oppervlakken
Kunstmatig verouderen van hout
Opfrissen van oude meubelen
...
The length of this bit is 130mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers.
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. Includes zero voltage protection on the switch for improved safety in the event of voltage loss. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in high quality carbide (widia) with diameter Ø500mm. The direct-drive induction motor delivers 3.5 HP. Use at least power cable with thickness 2.5m² to avoid damaging the motor. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 180mm.
The tilting saw is equipped with an automatic return unit using a spring. The saw blade is effortless to operate and cuts quickly through the wood. Saw large quantities of wood in one go without any problems and ergonomically. Using the extendable support and size indication, you can cut even longer pieces to the same size. Equipped with a sturdy base with two wheels and a pull rod which makes it easy to move the machine. Easy to move, both indoors and outdoors and on uneven surfaces. Fully assembled on delivery and ready to use.
Sanding disc for sander TT1220.
Diameter 255 mm
Available in grit 60 - 80 - 100 - 120 - 150 - 220
Universal sanding belt with quality grit for sanding plywood, plastic, softwood and even hardwood.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
Fraise à chanfreiner combinée à 2 coupes qui rend possible couper, affleurer et chanfreiner chaque type de laminé sans changer votre outil. Le face à couper est plat et sous angle de 45°. Appropriés aussi pour des travaux simples sur bois tendre et dur.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
Adapter ring to reduce the bore of your saw blade to comply with your machine. Make sure every saw blade is compatible with your own machine thanks to these convenient reduction rings.
Reduction from bore 35mm to 26mm.
This spacer ring is designed for the use of the narrow nylon brush on the Durotec structuring/brushing machine. Narrow brushes are the ideal solution for hard-to-reach areas.
Double outlet Ø125mm to be used with Air Flux Cyclone Dust Extractors. The large diameter measures 203mm, which can be mounted on the cyclone dust extractors, with branching to 2x125mm.
READYtoWORK pakket van paneelzaag ITAMAC Maestro X7 3200mm inclusief afzuiginstallatie, afzuigslang, klembanden, montageklemmen etc. en set van hoofdzaagblad en voorritser voor afwerking plaatmateriaal. Formaatzagen met brede geanodiseerde aluminium roltafel op dubbele slijtvaste staafgeleiding met vervangbare rollers. Voorzien van een ingebouwde module start/stop systeem welke garant staat voor een optimaal gebruikscomfort.
Cette ventouse a un corps en plastique solide en ABS. Il a une capacité de chargement de 20 kg. Comprend une housse de protection. Peut être utilisé d'une seule main.
Universeel links-rechts getand zaagblad met 48 tanden geschikt voor het verzagen van verschillende houtsoorten, gelamineerde materialen, MDF, dubbelzijdige fineerplaten of spaanplaten in stapel. Te gebruiken met paneelzagen of zaagtafels. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede.
Powerful rotary orbital sander for high quality sanding and polishing on both wood and metal. This machine combines a double movement, the sanding pad moves both orbital and rotary orbital. Thanks to the double movement during sanding, you always get a smooth surface without scratching your workpiece. The RT188N sander is perfect for sanding or polishing both wooden and metal surfaces. Thanks to a 900W motor, this model is the most powerful sander if its type on the market. The ergonomic design ensures a perfect grip and comfortable working. The handle at the front of the machine can be placed to the left or right of the machine. This allows both left and right-handers to work comfortably with this sander. All these qualities make the RT188N an indispensable tool for every professional.
As standard, this sander is fitted with an integrated dust extractor and dust bag. Including soft PU sanding pad (Ø150mm) with velcro.
Known for its excellent properties, the DuroGrind brush consistently delivers high-quality surface results. Whether ferrous and non-ferrous metals or alloyed and unalloyed steel, this versatile brush offers optimal performance.
Thanks to the improved properties of DuroGrind, you can rely on exceptional surface quality. With DuroGrind, you can achieve the highest quality regardless of the type of metal you process.
Tube translucide avec poignée et vane d'arrêt pour utilisation avec les aspirateurs de marque Air Flux. Utilisez le Clean-Up Kit pour nettoyer votre atelier et pour aspirer le poussière et coupeaux de bois restant.
Un outil indispensable pour tout bricoleur. Un multi-outil avec lequel vous pouvez tout faire. Cette meuleuse d'angle (puissance 2300W) est parfaitement adaptée aux travaux de meulage lourds. Il est alimenté par le réseau électrique. La meuleuse d'angle peut être utilisée pour couper le métal, le bois et la pierre, mais vous pouvez également l'utiliser pour enlever la rouille et écailler le métal.
Lame de scie avec 64 dents
Lame de scie 'Xtra Cut' avec denture plate/trapézoïdale (FZ/TR) 5° négatif. Cette lame de scie est approprié pour la découpe d'aluminium plein, PVC et des métaux non-ferreux. À utiliser sur scie à table. Ce lame vous offre une bonne finition et longue durée de coupe. Silencieuses, antibruit avec une résine spéciale insérée dans les fentes de silence pour une plus grande stabilité et une considérable réduction des vibrations pendant l'usinage. Silencieuses
Choisissez le bon nombre de dents pour un résultat optimal de votre projet. Un faible nombre de dents convient pour les travaux de sciage rapide et grossier. Un nombre élevé de dents nécessite une vitesse de coupe plus lente, mais assure une coupe fine et nette.
Connector 45° with diameter 100mm to be used in combination with the Air Flux dust extraction systems.
Bandsaw blade with length 2240mm for use on the TT312 band saw machine from Tendotools. This saw blade has 6 TPI (teeth per inch) and has a width of 6mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
Ce support multiréglable pour tours à bois peut être réglé en hauteur et en largeur de 603 mm à 901 mm.
Wheeled saw cart (outfeed) for Timber Yard Champ TT400TX.
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. Includes zero voltage protection on the switch for improved safety in the event of voltage loss. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in high quality carbide (widia) with diameter Ø500mm. The direct-drive induction motor delivers 3.5 HP. Use at least power cable with thickness 2.5m² to avoid damaging the motor. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 180mm.
The tilting saw is equipped with an automatic return unit using a spring. The saw blade is effortless to operate and cuts quickly through the wood. Saw large quantities of wood in one go without any problems and ergonomically. Using the extendable support and size indication, you can cut even longer pieces to the same size. Equipped with a sturdy base with two wheels and a pull rod which makes it easy to move the machine. Easy to move, both indoors and outdoors and on uneven surfaces. Fully assembled on delivery and ready to use.
Etabli en hêtre massif avec une surface de travail de 120 mm d'épaisseur. L'établi idéal pour le professionnel ou pour votre atelier à domicile. L'établi est équipé en standard de deux étaux en fonte Bench11 avec la possibilité d'en installer un troisième (Bench 11Q). L'ensemble de l'établi est déjà huilé à la livraison. L'ensemble standard de cet établi comprend une paire de poteau cylindrique (Ø19mm) en acier plein. Hauteur de travail fixe de 900 mm. Des armoires de rangement sur mesure pour le montage dans le châssis sont disponibles séparément.
Disque à poncer pour ponceuse TT1220.
Diamètre 255 mm
Disponible en grain 60 - 80 - 100 - 120 - 150 - 220
Bande à poncer universelle avec un grain de qualité pour le ponçage du contreplaqué, du plastique, du bois tendre et même du bois dur.
La solution abordable pour vos perçages multibroches et vos charnières d'armoire, avec une opération pneumatique !
La perceuse est fournie par défaut avec une base.
Les adaptateurs pour le perçage multibroches et les charnières d'armoire sont optionelles.
La machine est équipée d'un puissant moteur à induction avec un module multibroches de 5 trous à la fois à opération pneumatique. Les glissières télescopiques en aluminium sont équipées d'arrêts rabattables pratiques avec un réglage fin pour régler la distance du bord. Cela vous laisse les mains libres pour tenir la pièce en place.
Il est très facile de retirer le module de perçage multibroches et de monter un adaptateur pour les charnières d'armoire. Cet adaptateur pour les charnières d'armoire est disponible pour les charnières Salice, Blum en Hettich. Le châssis est équipé d'une armoire de rangement pratique pour vos mèches et accessoires. et dispose d'une grande surface de travail au sommet.
À l'arrière, il y a une grande buse d'aspiration, afin que vous ayez également une vue claire de votre pièce.
Raccord en coude 90° et diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux.
Elleboogstuk met hoek van 90° en diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen.
De robustes poteaux cylindrique en acier à utiliser sur les établis de Pinie. Les poteaux sont munis d'un système de ressort pour se sécuriser dans les trous de l'établi. La longueur totale du poteau est de 100 mm, vendu par paire.
Powerful belt sander for levelling and rough work. The LB31E sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. The machine is equipped with stoppers in high quality carbide (widia) to prevent wear and tear on the housing. Equipped with a connection for dust extraction to allow the user to work comfortably and cleanly. Several sanding belts with different grit sizes are optionally available.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece.
Also available with integrated dust extractor and dust bag as model LB31EA.
Lame de scie 'Xtra Cut' avec denture plate/trapézoïdale (FZ/TR) 5° négatif. Cette lame de scie est approprié pour la découpe d'aluminium plein, PVC et des métaux non-ferreux. À utiliser sur scie à table. Ce lame vous offre une bonne finition et longue durée de coupe. Silencieuses, antibruit avec une résine spéciale insérée dans les fentes de silence pour une plus grande stabilité et une considérable réduction des vibrations pendant l'usinage. Silencieuses
Choisissez le bon nombre de dents pour un résultat optimal de votre projet. Un faible nombre de dents convient pour les travaux de sciage rapide et grossier. Un nombre élevé de dents nécessite une vitesse de coupe plus lente, mais assure une coupe fine et nette. Disponsible avec plusieurs nombres de dents.
Cet jeux de protecteurs en pvc peut être utilisé sur les serre-joints Mod M, MM ou Maxipress M.
Le plastique est exempt d'huile et ne laisse donc pas de taches sur votre pièce.
Cette table à vide électrique sur pied basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. Pour que la table soit à vide, elle doit être connectée au système de fixation électrique à vide SVE600 de Virutex (inclus en standard). Grâce à sa taille compacte, cette table à vide peut être utilisée aussi bien dans l'atelier qu'à l'extérieur. La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. De plus, la plaque supérieure peut être tournée à 360°. Le support doit être fixé à l'aide de pinces (non comprises). Comme vous pouvez placer la table à la fois verticalement et horizontalement, ce module est idéal pour un large éventail d'applications. Pièces de serrage pour le collage, le fraisage, l'ébavurage, etc...
En utilisant les joints en caoutchouc fournis en standard, vous pouvez facilement diviser le tableau en sections plus petites. C'est très utile pour sécuriser les petites pièces, par exemple. Pour sécuriser des pièces plus importantes, le support auxiliaire SVE680 est disponible en option. Ce support est spécialement conçu pour se connecter au modèle SVE660 ou SVE670. Livraison standard avec un joint en caoutchouc déjà installé.
Move large panels in an ergonomic way with the Kreg Plate carrier. Clamp, lift and go! Carrying large plates becomes easier. You can move sheets yourself without any extra effort or risk of damaging the material. Simply slide the large pads over the panel and lift the lever to clamp and automatically adjust to the material thickness. The pads are coated with Kreg GripMaxx™ to ensure a strong, secure grip without damage, dents or marks. Even on fragile plywood veneer.
The ergonomic handle has thick, durable padding, which makes carrying the plates comfortable. Moreover, the more you lift the handle, the tighter the pads squeeze to prevent slipping. The panel carrier is a great addition for any project builder.
Les groups d’aspiration se distinguent des aspirateurs cyclones classiques grâce à leur système d'aspiration unique avec système de dépression. Il n'est pas nécessaire de placer les sacs résiduels dans un panier en fil de fer car ils peuvent être aspirés. En option, vous pouvez également commander à distance les groupes d’aspiration du cyclone Air Flux® grâce à un module PCB (vendu séparément). Les groups d’aspiration Air Flux® sont également disponibles en version mobile qui, grâce aux roues industrielles, peut facilement être utilisée dans tout votre atelier. Le moteur silencieux assure une excellente protection non seulement de vos poumons mais aussi de vos oreilles.
Cet aspirateur est équipé d'un moteur à induction de 2 CV et fournit une capacité d'aspiration de 2270m³/heure. Grâce à l’unité de collecte avec cyclone les particules de bois et la poussière (99,9%) sont séparés avant le flux air passe par le cartouche filtrante. Parce que les particules de bois ne touche pas le ventilateur, un flux d’air optimal et la collecte de la poussière sont toujours garantis. Alors, la poussière est collecté dans un fût métallique avec regard. Ce fût est détachable grâce à une poignée à deux maines et fermeture sur deux côtés. La poussière restante passe par une cartouche filtrante Canister avec nettoyage automatique. Grâce à cette cartouche la poussière entre 0,2µm et 2µm est filtré vers un sac à déchets en PVC.
Saw blade 235x30x24T
For all handheld circular saws:
Hitachi C9U series
Makita DHS900 series
Bosch GKS85 series
Metabo KS85 series
Sanding belt for open-end drum sander TT457M
2265 x 78 mm
Available in grit 60 - 80 - 100 - 150 - 240
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
Identical to model LR84H but with electronic speed control. Lightweight and powerful mini orbital sander for polishing and finishing your workpieces. The ergonomic design ensures a perfect grip and comfortable working. All the controls are easily accessible while working. Standard delivery with Delta attachment for sanding hard-to-reach areas such as corners or blinds. The Delta piece is provided with velcro at both top and bottom to attach sandpaper. Optionally, a round sanding plate is also available for this machine. Equipped with an integrated dust extractor and dust bag.
Deze transporthendel is standaard voorzien van een klem waardoor deze hendel geschikt is voor meerdere functies. Inzetbaar als kantenpers, hoekpers of transporthendel. Dankzij het ontwerp in aluminium is deze hendel erg sterk en robuust. De maximale last bedraagt 70kg. Als kantenpers kan u de PC81U zowel gebruiken op rechte panelen, als op holle of bolle panelen. Als hoekpers wordt deze hendel dan weer de ideale tool om bijvoorbeeld kaders te maken. De klem is afneembaar en door de handgreep van positie te veranderen is de PC81U eenvoudig om te bouwen tot transporthendel. Geschikt voor panelen van dikte tussen 0mm en 46mm.
Encolleuse manuelle spécialement conçu pour le collage de grandes surfaces avec des adhésifs vinyliques (blancs). Disponible en deux modèles avec des largeurs de rouleaux et des capacités de conteneurs de colle différentes. Le modèle EM26D est équipé d'un rouleau d'une largeur de 122 mm et d'une capacité de 1 kg. Le plus grand modèle EM126D a un rouleau d'une largeur de 180 mm et une capacité de 1,4 kg. La machine est équipée d'une gâchette sur la poignée pour faciliter l'ouverture et la fermeture du récipient de colle. Il suffit d'appuyer sur la gâchette pour faire couler la colle sur le rouleau. Grâce à ce déclencheur, vous obtiendrez toujours la bonne quantité de colle pour votre projet. Grâce au support, la encolleuse à main peut être facilement rangée. Pour le nettoyage, vous pouvez facilement placer cet encolleuse sous l'eau sans risque de dommages.
Attention : cet encolleuse est livré en standard avec un rouleau en mousse, adapté aux adhésifs vinyliques (blanches) et aux adhésifs à base d'eau. Pour les adhésifs synthétiques, un rouleau de PU est disponible en option (réf. 2504065). Cette encolleuse est également disponible avec un rouleau de colle supplémentaire en haut pour le collage stationnaire de pièces par le haut (modèle EM25D et EM125T).
The thicknessing unit is an indispensable tool for thickness planing on the Belmash SDM2500 and makes it possible to obtain a workpiece of excellent quality. It has its own cutterblock that is driven via the motor of the SDM2500. With this unit you can plan thickness on the SDM2500 of 5-103mm and a planing width of 250mm.
This transport handle is standard equipped with a clamp which makes this handle suitable for multiple functions. Can be used as an edge press, corner press or transport handle. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. As an edge press you can use the PC81U on straight panels as well as concave or convex panels. As a corner press, this handle becomes the ideal tool for making frames, for example. The clamp is detachable and by changing the position of the handle, the PC81U can easily be converted into a transport handle. Suitable for panels between 0mm and 46mm thick.
The Timber Boy TT315 is a powerful table saw with a powerful 4 hp induction motor. It is equipped with a miter guide with eccentric clamping and a galvanized work table and comes standard with an extension table (also galvanized), handles and wheels, making it ideally suited for prolonged outdoor use. The tungsten carbide saw blade has a diameter of 315 mm and a bore of 30 mm and can be tilted 45° with the convenient controls.
The legs of the base can be folded in in no time, so the machine can be easily transported in a passenger car.
The length of this bit is 130mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers.
This wheelbase from Belmash is compatible with the Universal 2000, SDM2500, SDMR2500 and SDR2200 machines. Place your Belmash machine at an ideal height and make it mobile.
Bandsaw blade with length 3607mm for use on the TT500X band saw machine from Tendotools. This saw blade has 2 TPI (teeth per inch) and has a width of 32mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
Drill table to fit on the Triple Major TT310 planer thicknesser. Voorzien van kogellagers en eenvoudig met één hand te bedienen dankzij de stuurhendel. Robust table 500x210 mm, suitable for drills with a 16 mm shank. Delivered with drill head
BELMASH SDM-2500 is the most powerful, most functional and productive machine in its class in the world! It is possible to saw wood with a height of 117 mm, and this with 100% attention to safety.
Functions: sawing at different angles, planing, drilling, milling, grooving, safety pressers and optional thicknessing device and mortising table.
These portable and compact planers and saws 230V are unique on the market.
Be sure to check out the VIDEO
They work with very powerful induction motors compared to all other machines of its kind.
An induction motor has 30% more power than a carbon brush motor and is more than 40% quieter. Moreover, it is maintenance-free as no carbon brushes need to be replaced. Furthermore, they are driven in an industrial way by means of poly belts instead of classic V-belts. The construction of the frame is also very unique and robust, as 3.5 mm thick sheet steel is used. This together guarantees excellent performance, but also optimal resistance for your machine.
Thanks to the micro-lifting system of the planing tables, the planing depth can be set very accurately and smoothly, but the tables can also be closed completely in a fast way. By fully closing the tables, the saw table has a large work surface. This SDM2500 has a very clear and accurate reading for every setting.
The guide can be blocked both in front of and behind the work table, which guarantees stable and precise work. It can also be angled with a very clear reading, and this for both the planer and the sawing function. For the sawing machine there is also a miter gauge with clear reading.
The cutting height is easily adjustable from 0 to 117mm by a robust handle and handy and large lock nut. Furthermore, the machine is also equipped for working with rabbet or rebating cutters up to 12mm thickness, which are perfectly adjustable in height. Supplied as standard with safety pressers on the planer.
Optionally, an additional thicknesser can be obtained which is driven by a poly V-belt. In addition to the standard milling table, a mortising table is also available.
Due to the high-quality construction of these compact machines such as thick sheet steel, direct drive, induction motors, high-quality ball bearing, large and robust set and rotary handles, this machine has an enormous user comfort with excellent performance and an optimal service life.
The switch is located on a rotating arm and can be freely rotated to the right or left, in order to fix it in the most favorable position and to work safely at all times.
The portable multifunctional woodworking machine is standard equipped with: clamping device, saw guide, saw blade with splitting wedge, ruler, cover plate, handle (thumbscrew), miter guide, insert, planer knives in knife block, bracket, operating manual.
These portable and compact planing and sawing machines 230V are unique on the market and one of a kind. Compared to all other smaller machines, they work with very powerful induction motors.
An induction motor has 30% more power than a carbon brush motor and is more than 40% quieter. Moreover, it is maintenance-free as no carbon brushes need to be replaced. Furthermore, they are driven in an industrial way by means of poly belts instead of classic V-belts. The construction of the frame is also very unique and robust, as 3.5 mm thick sheet steel is used. This together guarantees excellent performance, but also optimal resistance for your machine.
Very fast change from planer to sawing function by repositioning the belt.
The uniqueness of this is that these models work with a separate knife block for each operation. The independent drive provides the ideal speed for planing and sawing, so the planer and saw also rotate separately for safety. Thanks to the micro-lifting system of the planing tables, the planing depth can be set very accurately and smoothly, but the tables can also be closed completely in a quick way. By fully closing the tables, the saw table has a large work surface. This Universal 2.0 has a very clear and accurate scale for each setting.
The guide can be blocked both in front of and behind the work table, which guarantees stable and precise work. It can also be set at an angle with very clear reading, and this for both planing and sawing. For the sawing machine there is also a miter gauge with clear reading. The machine is designed to work with grooving cutters up to 10mm thickness.
The high-quality construction of these compact machines such as thick sheet steel, direct drive, induction motors, high-quality ball bearing, large and robust set and rotary handles give this machine an enormous comfort with excellent performance and an optimal service life.
The portable multifunctional woodworking machine is standard equipped with: clamping device, saw guide, saw blade with splitting wedge, ruler, cover plate, handle (thumbscrew), miter guide, insert, planer knives in knife block, bracket, operating manual.
With this panel pilot bit you can quickly make accurate openings in panels, doors and windows. The V-point plunges easily through the top layers of any panels including laminated materials. The carbide cutting edges cut clean and fast, guaranteeing a perfect finish of your projects. The pilot of the bit will act as a guide.
Straight grinders are ideal for grinding jobs in hard-to-reach places. Sparky's straight grinder is light and compact, which makes it easy to handle. The straight grinder is connected to the mains. This model lends itself perfectly to milling, polishing and engraving. Indispensable for precision work.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Ventouse robuste pour surfaces convexes et plates avec une capacité de charge de 120 kg. Équipé d'une pompe en plastique solide avec indicateur ABS. Bouton de décompression instantanée Cette ventouse est livrée avec un étui de transport et une housse de protection.
Fraise à double rayon classique pour réaliser de belles arêtes nettes sur des armoires, des portes, des tiroirs ou d'autres meubles. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois.
Sanding sleeve 35 x 140 mm for Spindle Sander TT140
Available in grit 80 - 100 - 120
Sold per 3 pieces
Buizen zijn efficiënter dan slang voor stofopvang over lange afstanden. Deze doorzichtige plastic buis is verkrijgbaar in lengtes van 100 cm om uw stofverzameling van punt A naar punt B te krijgen. Gebruik 100 mm afzuigslang of koppeling (art. 3DU1070) om buizen samen te voegen, of om de buis aan te sluiten op andere 100mm accessoires.
Patin spécial pour installation de parquet et travaux dans les espaces étroits. Support de PA et points de pression en acier.
À utiliser avec PIHER Quick presse une main.
Werkbank gemaakt uit Duitse beuk. Zwaluwstaart verlijmd.
135x135x74 cm
Duitse beuk
4 bankvijzen
Zwaluwstaart verlijmd
Biedt plaats voor vier personen
This powerful diamond wall cutter is designed for pulling trenches for power lines. The device is equipped with high-quality electronics with built-in overload protection. At the same time, a current limitation was provided when the device was started up. This enhances safe and correct use, even for beginners. The desired milling width can be set quickly. Finally, it is possible to connect a hoover directly to the unit, which makes work considerably easier.
Le tremplin True-FLEX™ doit son nom à sa conception méticuleusement élaborée. La planche à ressort True-FLEX™ exerce une pression constante et optimale, et résistera à des années d'utilisation intensive dans votre atelier de menuiserie. Le tremplin est fabriqué en plastique composite extrêmement durable et possède un système Wedge-Lock™ qui permet de le fixer à divers outils sans matériel supplémentaire. Que vous utilisiez une rainure d'onglet ou en T, que vous travailliez sur une scie à table ou une table de défonceuse, le système Wedge-Lock™ s'adapte pour que vous puissiez travailler en toute confiance.
Utilisés ensemble, ils offrent un support supplémentaire pour les pièces de grande taille. Cela vous permet de travailler avec encore plus de précision.
The Belmash RS-02 is invaluable when working with longer pieces of wood than the work table can support. This roller support provides a safe and easy way to work with these oversized pieces. Easy and convenient to use. Equipped with Teflon rollers to prevent damage to your workpiece. Height adjustable between 700mm and 1050mm.
Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise.
Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.
Grâce à son support en oxyde d'aluminium brun et lin, le DuroFlap offre une finition homogène et de haute qualité lorsqu'il est utilisé sur l'acier, l'acier inoxydable et les métaux non ferreux. Il donne une finition excellente et constante sur une longue période et est universellement applicable au métal et à l'acier inoxydable.
Ces raboteuses et scies portables et compactes 230V sont uniques sur le marché. Par rapport à toutes les autres machines plus petites, elles fonctionnent avec des moteurs à induction très puissants.
Un moteur à induction a 30% de puissance en plus qu'un moteur à balais de charbon et est plus de 40% plus silencieux. De plus, il ne nécessite aucun entretien car aucun balai de charbon n'a besoin d'être remplacé. De plus, ils sont entraînés de manière industrielle au moyen de courroies poly au lieu des courroies trapézoïdales classiques. La construction du cadre est également très unique et robuste, car une tôle d'acier de 3,5 mm d'épaisseur est utilisée. L'ensemble garantit d'excellentes performances, mais également une résistance optimale pour votre machine.
Changement très rapide de la fonction de rabotage à la fonction de sciage en repositionnant la courroie.
La particularité de ceci est que ces modèles fonctionnent avec un bloc de couteaux séparé pour chaque opération. L'entraînement indépendant fournit la vitesse idéale pour le rabotage et le sciage, de sorte que la raboteuse et la scie tournent également séparément pour plus de sécurité. Grâce au système de micro-levage des tables de rabotage, la profondeur de rabotage peut être réglée très précisément et en douceur, mais les tables peuvent également être fermées complètement de manière rapide. En fermant complètement les tables, la table de scie a une grande surface de travail. Cet Universal 2.0 a une lecture très claire et précise pour chaque paramètre.
Le guide peut être bloqué à la fois devant et derrière la table de travail, ce qui garantit un travail stable et précis. Il peut également être réglé en angle ou en onglet avec une lecture très claire, et ceci aussi bien pour le rabotage que pour le sciage. Pour la machine à scier, il existe également une jauge à onglets avec indication claire des degrés. La machine est conçue pour fonctionner avec des fraises à rainurer jusqu'à 10 mm d'épaisseur.
La construction de haute qualité de ces machines compactes telles que la tôle d'acier épaisse, l'entraînement direct, les moteurs à induction, les roulements à billes de haute qualité, le grand ensemble robuste et les poignées rotatives confèrent à cette machine un énorme confort d'utilisation avec d'excellentes performances et une durée de vie optimale.
Les machines multifonctionelle portable et equipe standard de guide de scieage, scie, couteaux, coin de fente, poignee, outils de rabotage
Verplaatst grote panelen op een ergonomische manier met de Kreg Platendrager. Klemmen, optillen en wegwezen! Het dragen van grote platen wordt makkelijker. U kan platen zelf verplaatsen zonder extra inspanning of risico op beschadiging van het materiaal. Schuif gewoon de grote pads over het paneel en til de hendel op om het vast te klemmen en automatisch aan te passen aan de materiaaldikte. De pads zijn bekleed met Kreg GripMaxx™ om een sterke, veilige grip te garanderen zonder beschadigingen, deuken of vlekken. Zélfs op kwetsbaar multiplex fineer.
De ergonomische handgreep heeft een dikke, duurzame vulling, dit maakt het dragen van de platen aangenaam. Bovendien, hoe meer u de handgreep optilt, hoe strakker de kussentjes knijpen om wegglijden te voorkomen. De paneeldrager is een geweldige aanvulling voor elke projectbouwer.
Bandsaw blade with length 3607mm for use on the TT500X band saw machine from Tendotools. This saw blade has 4 TPI (teeth per inch) and has a width of 13, 16 or 20mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
The Job-Saw TT255 is a powerful and compact machine for all carpentry work in the workshop or on the job site. The telescopic extension table goes up to a length of 1030 mm. Equipped with built-in extractor with a large collection bag. Cutting height of 82 mm at 90° and easily tiltable to 45°. Easy to move and with telescopic handle. Width guide with eccentric clamping.
The Air Flux 3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Afsluitschuif met diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. Voorzien aan een zijde van schroefdraad voor de flexibele afzuigslang en aan andere zijde van quick aansluiting die past op andere PVC accessoires van Ø 100 mm.
Double ventouse sur un corps fixe. Corps en alliage d'aluminium solide. Comprend une housse de protection. Utilisation à une main. Cette ventouse a une capacité de charge de 60 kg.
Blast gate diameter 100mm to be used with the Air Flux dust extractors. Threaded on one side for the flexible extraction hose and on the other side with a quick connection that fits other PVC accessories of Ø 100 mm.
Weight
5 kg
4 kg
0,3 kg
1 kg
1 kg
223 kg
0,05 kg
160 kg
0,05 kg
2,7 kg
0,5 kg
0,5 kg
ND
1 kg
1 kg
6 kg
0,05 kg
130 kg
0,05 kg
1 kg
0,05 kg
1 kg
0,05 kg
0,300 kg
2 kg
900 kg
0,3 kg
1 kg
2,6 kg
0,3 kg
1 kg
5 kg
1 kg
0,5 kg
0,5 kg
ND
10 kg
130 kg
184 kg
0,05 kg
59 kg
0,5 kg
0,5 kg
0,1 kg
6,5 kg
1 kg
0,04 kg
1 kg
ND
150 kg
1 kg
0,05 kg
0,05 kg
1,5 kg
0,65 kg
2 kg
16,5 kg
0,65 kg
48 kg
0,05 kg
7 kg
0,5 kg
10 kg
68 kg
36 kg
0,05 kg
2 kg
0,05 kg
1,77 kg
0,05 kg
0,05 kg
1 kg
ND
110 kg
4,5 kg
2 kg
5,2 kg
1 kg
0,300 kg
36 kg
ND
0,5 kg
36 kg
300 kg
0,5 kg
0,94 kg
0,5 kg
Dimensions
ND
50 cm
ND
ND
ND
ND
ND
145 × 145 × 70 cm
ND
ND
ND
ND
ND
ND
ND
ND
ND
105 × 85 × 110 cm
ND
ND
ND
ND
ND
7,5 × 2 cm
ND
ND
ND
ND
ND
12 × 10 cm
ND
ND
ND
ND
ND
ND
ND
105 × 85 × 110 cm
215 × 79 × 90 cm
ND
820 × 353 × 515 cm
ND
ND
10 cm
ND
ND
ND
ND
ND
130 × 80,5 × 190 cm
ND
ND
ND
ND
ND
ND
ND
ND
940 × 660 × 470 cm
ND
ND
ND
50 × 21 cm
93 × 59,5 × 39 cm
ND
ND
ND
ND
ND
ND
ND
100 × 10 × 10 cm
ND
165 × 165 × 74 cm
ND
ND
ND
ND
10 × 12 cm
ND
ND
ND
ND
730 × 1730 × 2280 cm
ND
ND
ND
Additional information
Poids
5 kg
Connexion d\'extraction
63 mm
Poubelle
99L
Poids
4 kg
Dimensions
50 cm
Hoekbereik
+/- 60°
Vaste verstekken
-60°, -45°, -22,5°, 0°, 22,5°, 45°, 60°
Geleiderprofiel
460 x 19 x 9 mm
Nauwkeurigheid fijnafstelling
0,02 mm
Poids
0,3 kg
Grain
K60
Diamètre
∅115 x 25 SMALL
Poids
1 kg
Longueur
150mm
Poids
1 kg
Diamètre lame de scie
125mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
6,0mm
Epaisseur lame de scie
4,0mm
nombre de dents
12
Forme de dent
Denture V
Poids
223 kg
Moteur
4 CV, 5.5 CV
Voltage
230 V, 3 x 400V
Diamètre lame de scie
254mm
Profondeur de coupe 90 °
80 mm
Profondeur de coupe 45°
55 mm
Vitesse de la lame de scie
3550
Max. largeur DADO
20,6 mm
Connexion d\'extraction
100 mm
Max. largeur à gauche
305 mm
Max. largeur à droite
750 mm
T-slots
2
Hauteur du plan de travail
875mm
Table de travail
1321 x 686 mm
Poids
0,05 kg
Grain
K60, K80, K100, 150
Poids
160 kg
Dimensions
145 × 145 × 70 cm
Hauteur du plan de travail
700mm
Poids
0,05 kg
Grain
K60, K80, K100, K120, 150, K220
Poids
2,7 kg
Max. breedte kanten
50mm
Max. dikte kanten
1mm
Temperatuur
1: 300°C, 2: 525°C
Luchtstroom
400l/min
Poids
0,5 kg
Poids
0,5 kg
Poids
ND
largeur de la mâchoire
10cm, 12,5cm, 15cm
Poids
1 kg
Diamètre lame de scie
550mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,8mm
nombre de dents
36
Poids
1 kg
Poids
6 kg
Puissance
800W
RPM Min-Max
1200-3900
Poids
0,05 kg
Diamètre
11mm
Longueur
130mm
Queue
13x50mm
Sens de rotation
A gauche, A droite
Poids
130 kg
Dimensions
105 × 85 × 110 cm
Voltage
230 V
Moteur
3.5 CV
Diamètre lame de scie
500mm
Max. diamètre de coupe
180mm
Poids
0,05 kg
Grain
K60, K80, K100, K120, 150, K220
Poids
1 kg
Diamètre lame de scie
125mm, 150mm, 180mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
2,5mm
Epaisseur lame de scie
1,6mm
nombre de dents
12, 18, 24
Poids
0,05 kg
Diamètre
12,7mm
Longeur de coupe
12,7mm
Longueur
41mm
Angle
45°
Faces de coupe
2
Poids
1 kg
Diamètre lame de scie
125mm, 150mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
1,8mm
Epaisseur lame de scie
1,3mm
nombre de dents
12, 18
Poids
0,05 kg
Diamètre
35mm
Diamètre de l\' arbre
26mm
Poids
0,300 kg
Dimensions
7,5 × 2 cm
Poids
2 kg
Poids
900 kg
Poids
0,3 kg
Diamètre
12,3cm
Supporte
20kg
Poids
1 kg
Diamètre lame de scie
315mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,2mm
Epaisseur lame de scie
2,2mm
nombre de dents
48
Poids
2,6 kg
Puissance
900W
Schuurdiameter
150mm
Ø Rotatie
7mm
Nominale snelheid
3500-7500rpm
Poids
0,3 kg
Dimensions
12 × 10 cm
Grain
K80, K180, K320
Poids
1 kg
Poids
5 kg
Puissance
2300W
vitesse
6500 rpm
Poids
1 kg
Diamètre lame de scie
200mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,2mm
Epaisseur lame de scie
2,5mm
nombre de dents
64
Orifices de traction
2/11/63
Poids
0,5 kg
Diamètre
100mm
Poids
0,5 kg
Longueur
2240mm
Largeur
6mm
Dikte
0,65mm
Poids
10 kg
Poids
130 kg
Dimensions
105 × 85 × 110 cm
Voltage
230 V
Moteur
3.5 CV
Diamètre lame de scie
500mm
Max. diamètre de coupe
180mm
Poids
184 kg
Dimensions
215 × 79 × 90 cm
Hauteur du plan de travail
900mm
Poids
0,05 kg
Grain
K60, K80, K100, K120, K220, 150
Poids
59 kg
Dimensions
820 × 353 × 515 cm
Table de travail
800 x 400 mm
Voltage
230 V
Puissance
1100W
Connexion d\'extraction
50 mm
Multibroches
5 pièces (entraxe de 32 mm)
Charnières
Blum, Hettich, Salice
Poids
0,5 kg
Diamètre
100mm
Poids
0,5 kg
Diamètre
100mm
Poids
0,1 kg
Dimensions
10 cm
Diamètre
19mm
Poids
6,5 kg
Puissance
1200W
Afmetingen schuurband
690x100mm
Schuuroppervlakte
175x100mm
Bandsnelheid
420m/min
Poids
1 kg
Diamètre lame de scie
300mm
Diamètre de l\' arbre
32mm
Epaisseur dent
3,4mm
Epaisseur lame de scie
2,6mm
nombre de dents
84, 96
Orifices de traction
2/11/63
Poids
0,04 kg
Poids
1 kg
Puissance
95W
Dimensions de la surface de travail
150x150mm
Pression de vide
750mbar
Poids
150 kg
Dimensions
130 × 80,5 × 190 cm
Moteur
2 PK
Voltage
230 V
Sortie
203mm – 3x100mm
Air Speed
2270m³/h
Ventilateur
300mm
Niveau sonore
76dB
Poubelle
103L
Sac à filtrer
500x720mm
Sac
500x1050mm
Poids
1 kg
Poids
0,05 kg
Grain
K60, K80, K100, 150, K240
Poids
0,05 kg
Diamètre
16mm
Longeur de coupe
13mm
Longueur
41mm
Rayon
R5
Faces de coupe
2
Poids
1,5 kg
Puissance
180W
Schuuroppervlakte
80x130mm
Ø Rotatie
2mm
Nominale snelheid
12500rpm
Vibrations
25000/min
Poids
0,65 kg
Max. Draagkracht
70kg
Paneeldikte
0-46mm
Poids
2 kg
Largeur rouleau
122mm
Contenu du bac à colle
1kg, 1,4kg
Poids
16,5 kg
Capacité d\'épaisseur
5-103mm
Nombre de couteaux
2
Largeur de rabotage
250 mm
Poids
0,65 kg
Max. Draagkracht
70kg
Paneeldikte
0-46mm
Poids
48 kg
Dimensions
940 × 660 × 470 cm
Alésage
30 mm
Diamètre lame de scie
315mm
Profondeur de coupe 45°
50mm
Profondeur de coupe 90 °
90 mm
Moteur
4 CV
Table de travail
550 x 800 mm
Verlengtafel
450 x 810 mm
Inclinaison
45°
Poids
0,05 kg
Diamètre
11mm
Longueur
130mm
Queue
16x50mm
Sens de rotation
A gauche, A droite
Poids
7 kg
Poids
0,5 kg
Longueur
3607mm
Largeur
32mm
Dikte
0,90mm
Poids
10 kg
Dimensions
50 × 21 cm
Poids
68 kg
Dimensions
93 × 59,5 × 39 cm
Moteur
3.5 CV
Voltage
230 V
Profondeur de coupe 90 °
117 mm
Max. hauteur avec fraise rainure
22 mm
Diamètre lame de scie
315mm
Diamètre de l\' arbre
30 mm
Vitesse de la lame de scie
2850
Largeur de rabotage
270 mm
Nombre de couteaux
2
Prof. de rabotage maximale
3 mm
Vitesse raboteuse
7700
Queue maximale de la fraise
12 mm
Poids
36 kg
Moteur
2.8 CV
Profondeur de coupe 90 °
97 mm
Largeur de rabotage
200 mm
Diamètre lame de scie
250mm
Voltage
230 V
Poids
0,05 kg
Diamètre
6,4mm
Longeur de coupe
19mm
Longueur
63mm
Faces de coupe
1+1
Poids
2 kg
Poids
0,05 kg
Diamètre
11mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2
Poids
1,77 kg
Diamètre
23cm
Supporte
120kg
Poids
0,05 kg
Diamètre
9,5mm
Longeur de coupe
8mm
Longueur
51mm
Rayon
R1,6
Faces de coupe
2
Poids
0,05 kg
Grain
K80, K100, K120
Poids
1 kg
Dimensions
100 × 10 × 10 cm
Diamètre
100mm
Poids
110 kg
Dimensions
165 × 165 × 74 cm
Poids
4,5 kg
Puissance
2100W
Schijfdiameter Ø
230mm
Max. zaagdiepte
65 mm
Poids
2 kg
Poids
5,2 kg
Draagkracht
50kg
Hauteur
700-1050mm
Voet
475x490mm
Poids
1 kg
Diamètre lame de scie
300mm
Diamètre de l\' arbre
32mm
Epaisseur dent
3,4mm
Epaisseur lame de scie
2,6mm
nombre de dents
72, 84, 96
Orifices de traction
2/11/63
Poids
0,300 kg
Dimensions
10 × 12 cm
Grain
K60, K120
Poids
36 kg
Moteur
2.8 CV
Profondeur de coupe 90 °
97 mm
Largeur de rabotage
200 mm
Diamètre lame de scie
250mm
Voltage
230 V
Poids
0,5 kg
Longueur
3607mm
Largeur
13mm, 16mm, 20mm
Dikte
0,65mm, 0,80mm
Poids
36 kg
Poids
300 kg
Dimensions
730 × 1730 × 2280 cm
Puissance
4PK
aantal filters
15
Filter afmetingen
160 x 1030 mm
filtratie oppervlakte
7.75 m2
afvalopslag
metal container (60x60x72cm)
capaciteit
3500m3
Poids
0,5 kg
Diamètre
100mm
Poids
0,94 kg
Supporte
60kg
Diamètre
12,3cm
Poids
0,5 kg
Diamètre
100mm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy