Modèle de salle d'expo
Le dépoussiéreur Air Flux est conçu pour augmenter la capacité de presque tous les aspirateurs conventionnels et les transformer en un système de dépoussiérage efficace. Le conteneur métallique de 99 litres est doté d'une fenêtre de niveau, de charnières à dégagement rapide et de roulettes. Le séparateur capture la sciure, les copeaux de bois et autres débris avant qu'ils ne pénètrent dans l'aspirateur, évitant ainsi la perte de puissance d'aspiration due à un filtre bouché. La base équipée de cinq roulettes pivotantes lui confère une stabilité exceptionnelle et une grande facilité de manœuvre dans l'atelier. Le séparateur de flux d'air crée un flux d'air cyclonique qui sépare la plupart des particules de poussière de bois et autres matériaux plus lourds que l'air, les empêchant ainsi de pénétrer dans l'aspirateur.
Cette fraise à chanfrein réglable avec des plaquettes en carbure de tungstène de haute qualité vous offre une grande flexibilité pour réaliser des chanfreins. La fraise est réglable des deux côtés entre 0° et 70° par incréments de 1°. Utilisez la fraise à la fois pour chanfreiner le bois et les planches. Grâce aux lames en carbure de tungstène, cette fraise à rainurer coupe sans effort les planches massives, les bois durs et tendres, le MDF ou les planches laminées.
La hauteur maximale de fraisage à 0° est de 48 mm, à 70° elle est de 15 mm.
Take the guesswork out of installing drawers and doors and easily create consistent spacing with the Setup and Spacer Shims. This set of seven plates (two 2mm for inset drawers, two 3mm, two 6mm and one 19mm) can be stacked with magnets to create different sized openings and disclosures, whether you're building something new. build, renovate or repair. Save time by not stressing about high-precision measurements; the plates make quick adjustments easy. Stackability and different lengths add versatility, making the Setup and Spacer Shims ideal for many projects, including window and door installations.
set of two protective pads for Piher Extra Quick.
Accessoire Piolet robuste pour les serre-joints PIHER Maxipress F.
Fabriqué en acier forgé.
Showroommodel
The Air Flux dust separator is designed to expand the capacity of almost any conventional dust collector and turn it into an efficient dust collection system. The 99 litre metal container has a level window, quick release hinges and castors. The separator captures sawdust, wood chips and other debris before it enters the dust collector, preventing loss of suction power due to a clogged filter. The base with five swivel castors makes it exceptionally stable and easy to manoeuvre around the workshop. The Air Flux Separator creates a cyclonic airflow that causes most wood dust particles and other materials heavier than air to separate, preventing them from entering the vacuum.
Beweegbare bek voor gietijzeren lijmklem Maxipress F, systeem met volledig beschermde schroefdraad
With the drill jig for loading rails, you can easily mount loading rails for drawers that fit perfectly and glide smoothly. The drill template for loader rails is suitable for cabinets with or without a front frame and for any type of rails, such as ball-bearing rails, epoxy-coated rails or bottom-mounted rails. This user-friendly drilling template has two hooks that hold the rails in place while you drill the mounting holes in the cabinet. With the built-in tabs, the hooks are easy to align on cabinets with a front frame, or with the markings on cabinets without a frame. The hooks of the drill template for drawer rails are also reversible, so that they can support the drawer itself while you attach the rails to it.
The updated DUROTEC structure brush machine is more powerful and compact and can run even slower for a better finish. The double reduction gearing allows you to apply pressure without the machine slowing down for extra correction force. The ergonomic design and lightweight make this machine perfect for handling during brushing, satin finishing, or structuring your workpiece. Durotec is an extremely compact machine with an ergonomic handy D handle.
Double reduction gearing
Adjustable speed 1200-3900 rpm
Marathon motor 800 W, constant torque
Ergonomic handle
Comes standard with DUROGRIND K80 fleece brush. Numerous brushes available optionally for both wood and metalworking.
De vandikte unit is een onmisbaar hulpmiddel bij het schaven op de Belmash SDM2500 en maakt het mogelijk om een werkstuk van uitstekende kwaliteit te verkrijgen. Het heeft een eigen schaafas die draait via de motor van de SDM2500. Met deze unit kan je van dikte schaven op de SDM2500 van 5-103mm en een schaafbreedte van 250mm.
This piston extension is made of stainless steel and has a length of 4 cm. Assembly via M6 and M8 bolts. It can be easily mounted on the TCP clamp for welding tables and other clamps with an M6 or M8 mounting hole, increasing the clamping range.
Modèle de salle d'expo
L'Itamac WL-508DC est un tour à bois très stable, avec contrôle de la vitesse par vario-inverter, tournant à gauche et à droite, avec un diamètre de tournage de 320 mm et 508 mm entre les pointes. La vitesse peut être réglée en continu dans 3 plages comprises entre 250 et 3850 tr/min. (250-750 / 550-1650 / 1300-3850 tr/min). Le vario-onduleur peut maintenir un couple constant à n'importe quelle vitesse, ce qui fait que même à bas régime, il reste très puissant. Le moteur est un moteur à courant continu à faible bruit de 1000 watts.
De Kreg Pocket-Hole Jig 520 Pro is een praktisch en veelzijdig verbindingssysteem. Met dit systeem maakt u zeer stevige pocket-holes in materialen met een minimale dikte van 13 mm en een maximale dikte van 38 mm.
De Pocket-Hole Jig 520 Pro heeft een aantal unieke punten. Zo heeft de jig een 360° roteerbaar handvat. Dit handvat zorgt ervoor dat u het systeem bij elk project comfortabel kunt gebruiken. Daarnaast heeft de Pocket-Hole Jig 520 Pro heeft een ingebouwd klemsysteem. U knijpt simpelweg in het handvat tot dat het materiaal vast genoeg is geklemd. Het antislipmateriaal op de 520 Pro zorgt ervoor dat het verbindingssysteem niet verschuift, in welke positie u de jig ook gebruikt. U kunt de dikte van het materiaal opmeten met de meegeleverde materiaaldiktemeter.
With this adapter, you can adapt your square drill bits to other machines.
Deze pneumatische vacuümtafel op kantelbare steun is ontworpen om gladde, niet poreuze werkstukken vast te klemmen. Het vacuüm tussen de basis van de tafel en het werkstuk zorgt voor een stevige klemming en laat na gebruik geen sporen na. De kop van de steun kan 90° kantelen zodat u het werkstuk in een ideale positie kan plaatsen. De steun moet vastgezet worden met klemmen (niet inbegrepen). Deze steun is specifiek ontworpen om aan te sluiten op het model SVN450 of SVN460. Geen rechtstreekse aansluiting op de compressor zoals model SVN450 of SVN460.
DEMO MODEL, ONE PIECE ONLYMODEL WITH PEB250
Portable edge bander PEB200+ or PEB250+ pre-mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edgebanding with thicknesses between 0.4-3mm and 10-62mm height. Choice of table with model PEB200+ or PEB250+. Both are suitable for gluing the same types of panels with one important difference. The model PEB250+ has speed and temperature control. The table is equipped with a holder for rolls and a manual end cutter.
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain.
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
Paquet promotionnel de la scie à panneaux ITAMAC Maestro X9 CNC 3200mm comprenant l'unité d'extraction, le tuyau d'extraction, les bandes de serrage et le jeu de la lame de scie principale et inciseur pour la finition de panneaux. Scies à panneaux avec large table à rouleaux en aluminium anodisé sur double guide-barre résistant à l'usure avec rouleaux remplaçables. Équipé d'un système de démarrage / arrêt de module intégré qui garantit un confort d'utilisation optimal.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Foret forstner avec queue cylindrique pour percer des charnières invisibles dans le plupart des bois ou panneaux. Cette mèche charnière de haute qualité avec pointe de centrage, deux faces de découpage en widia et deux guides en widia vous assure une finition parfait de tous vos trous. Rotation à droite uniquement.
Cette mèche est disponible en deux longueurs
Set de couteaux profilés hauteur 40mm Nr. 0013 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Content
Le dépoussiéreur Air Flux est conçu pour augmenter la capacité de presque tous les aspirateurs conventionnels et les transformer en un système de dépoussiérage efficace. Le conteneur métallique de 99 litres est doté d'une fenêtre de niveau, de charnières à dégagement rapide et de roulettes. Le séparateur capture la sciure, les copeaux de bois et autres débris avant qu'ils ne pénètrent dans l'aspirateur, évitant ainsi la perte de puissance d'aspiration due à un filtre bouché. La base équipée de cinq roulettes pivotantes lui confère une stabilité exceptionnelle et une grande facilité de manœuvre dans l'atelier. Le séparateur de flux d'air crée un flux d'air cyclonique qui sépare la plupart des particules de poussière de bois et autres matériaux plus lourds que l'air, les empêchant ainsi de pénétrer dans l'aspirateur.
Cette fraise à chanfrein réglable avec des plaquettes en carbure de tungstène de haute qualité vous offre une grande flexibilité pour réaliser des chanfreins. La fraise est réglable des deux côtés entre 0° et 70° par incréments de 1°. Utilisez la fraise à la fois pour chanfreiner le bois et les planches. Grâce aux lames en carbure de tungstène, cette fraise à rainurer coupe sans effort les planches massives, les bois durs et tendres, le MDF ou les planches laminées.
La hauteur maximale de fraisage à 0° est de 48 mm, à 70° elle est de 15 mm.
Take the guesswork out of installing drawers and doors and easily create consistent spacing with the Setup and Spacer Shims. This set of seven plates (two 2mm for inset drawers, two 3mm, two 6mm and one 19mm) can be stacked with magnets to create different sized openings and disclosures, whether you're building something new. build, renovate or repair. Save time by not stressing about high-precision measurements; the plates make quick adjustments easy. Stackability and different lengths add versatility, making the Setup and Spacer Shims ideal for many projects, including window and door installations.
With this set of two protective pads you can make your Piher Extra Quick clamp like new again.
You just click the pads on the clamp when the original pads have become too damaged.
Accessoire Piolet robuste pour les serre-joints PIHER Maxipress F.
Fabriqué en acier forgé.
The Air Flux dust separator is designed to expand the capacity of almost any conventional dust collector and turn it into an efficient dust collection system. The 99 litre metal container has a level window, quick release hinges and castors. The separator captures sawdust, wood chips and other debris before it enters the dust collector, preventing loss of suction power due to a clogged filter. The base with five swivel castors makes it exceptionally stable and easy to manoeuvre around the workshop. The Air Flux Separator creates a cyclonic airflow that causes most wood dust particles and other materials heavier than air to separate, preventing them from entering the vacuum.
Beweegbare bek voor klem Maxipress F
Whether you want to refresh cupboards or create a completely new cupboard, the drawers are always a challenge. With the drill jig for loading rails, you can easily mount loading rails for drawers that fit perfectly and glide smoothly. The drill template for loader rails is suitable for cabinets with or without a front frame and for any type of rails, such as ball-bearing rails, epoxy-coated rails or bottom-mounted rails. This user-friendly drilling template has two hooks that hold the rails in place while you drill the mounting holes in the cabinet. With the built-in tabs, the hooks are easy to align on cabinets with a front frame, or with the markings on cabinets without a frame. Of course, you are not finished when the rails are mounted in the cabinet. This is why the hooks on the drill template for drawer rails are reversible, so that they can support the drawer itself while you attach the rails to it.
Structure brush machine for wood metal and stone.
The DUROTEC textured brush machine is a master of brushing, satinising, sanding and polishing. The brushes mainly remove the softer wood of the more recent growth rings and leave the harder wood of the older growth rings intact. The wood is thus artificially aged, as the mechanical processing considerably accelerates the natural weathering effect. Brushed wooden surfaces are used, among other things, in the manufacture of rustic furniture, the furnishing of rustic cafés and restaurants (wall and ceiling coverings) or for beams.
The Durotec brushing machine is the ideal machine for rust removal from metal surfaces, oxidation removal, polishing of metal surfaces, finishing steel, stainless steel, and non-ferrous metals, etc.
The new brushing machine is more powerful and compact and can run even slower for a better finish. The double transmission ensures that you can apply pressure without slowing down the machine for extra correction power. The ergonomic design and low weight make this machine perfect to handle for brushing or structuring your workpiece. Equipped with a robust handle which is adjustable in height.
De vandikte unit is een onmisbaar hulpmiddel bij het vandikte schaven op de Belmash SDM2500 en maakt het mogelijk om een werkstuk van uitstekende kwaliteit te verkrijgen. Het heeft een eigen schaafas die draait via de motor van de SDM2500. Met deze unit kan je van dikte schaven op de SDM2500 van 5-103mm en een schaafbreedte van 250mm.
This piston extension is made of stainless steel and has a length of 4 cm. Assembly via M6 and M8 bolts. It can be easily mounted on the TCP clamp for welding tables and other clamps with an M6 or M8 mounting hole, increasing the clamping range.
L'Itamac WL-508DC est un tour à bois très stable, avec contrôle de la vitesse par vario-inverter, tournant à gauche et à droite, avec un diamètre de tournage de 320 mm et 508 mm entre les pointes. La vitesse peut être réglée en continu dans 3 plages comprises entre 250 et 3850 tr/min. (250-750 / 550-1650 / 1300-3850 tr/min). Le vario-onduleur peut maintenir un couple constant à n'importe quelle vitesse, ce qui fait que même à bas régime, il reste très puissant. Le moteur est un moteur à courant continu à faible bruit de 1000 watts. Avec ce tour à bois compact, une attention particulière a été accordée au tournage le plus silencieux et sans vibrations possible. Utilisation très conviviale avec un bouton rotatif pour le réglage progressif de la vitesse et un affichage numérique de la vitesse et du sens de rotation.
Les polydisques larges à trois étages avec large courroie polybelt sont très rapides et faciles à changer de position et ainsi la plage de vitesse peut être ajustée facilement et rapidement.Ce tour a un lit large et solide et donc une stabilité maximale pendant le tournage ! Le support de 200 mm de large glisse facilement vers le haut et vers le bas du lit et présente un joli bord biseauté à 45°.
De Kreg Pocket-Hole Jig 520 Pro is een praktisch en veelzijdig verbindingssysteem. Met dit systeem maakt u zeer stevige pocket holes in materialen met een minimale dikte van 13 mm en een maximale dikte van 38 mm.
De Pocket-Hole Jig Pro 520 heeft een aantal unieke punten. Zo heeft de jig een 360° roteerbaar handvat. Dit handvat zorgt ervoor dat u het systeem bij elk project comfortabel kunt gebruiken. Daarnaast heeft de Pocket-Hole Jig 520 Pro heeft een ingebouwd klemsysteem. U knijpt simpelweg in het handvat tot dat het materiaal vast genoeg is geklemd. Het antislipmateriaal op de 520 Pro zorgt ervoor dat het verbindingssysteem niet verschuift, in welke positie u de jig ook gebruikt.
U kunt de dikte van het materiaal opmeten met de meegeleverde materiaaldiktemeter. De maten op de meter komen overeen met die op de boormal en de stappenboor. U schuift de boorstop op de juiste maat vast met de materiaaldiktemeter, die ook een inbussleutel is. Deze verstelbare boorstop zorgt voor herhaalnauwkeurigheid van het Kreg-verbindingssysteem. Door de boorstop eenmaal in te stellen, kunt u zo meerdere pocket holes achter elkaar maken in dezelfde materiaaldikte.
Ook het ingebouwde klemsysteem zorgt voor meer herhalingsnauwkeurigheid. Het handvat heeft een 'quick reset'-functie, die ervoor zorgt dat de klem op ongeveer dezelfde dikte blijft. Zo kunt u meerdere malen achter elkaar met materiaal van dezelfde dikte werken, zonder dat u meerdere keren in het handvat hoeft te knijpen.
Bij de Kreg Pocket-Hole Jig 520 Pro krijgt u maar liefst 100 pocket-holeschroeven én een stap-voor-stap projectplan geleverd. Het Kreg-verbindingssysteem wordt tevens geleverd met een 51 mm Kreg-snelspanklem, voor het klemmen en assembleren van uw werkstuk.
With this adapter, you can adapt your square drill bits to other machines.
Deze pneumatische vacuümtafel op kantelbare steun is ontworpen om gladde, niet poreuze werkstukken vast te klemmen. Het vacuüm tussen de basis van de tafel en het werkstuk zorgt voor een stevige klemming en laat na gebruik geen sporen na. De kop van de steun kan 90° kantelen zodat u het werkstuk in een ideale positie kan plaatsen. De steun moet vastgezet worden met klemmen (niet inbegrepen). Deze steun is specifiek ontworpen om aan te sluiten op het model SVN450 of SVN460. Geen rechtstreekse aansluiting op de compressor zoals model SVN450 of SVN460.
Portable edge bander PEB200+ or PEB250+ pre-mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The automatic rollers and feed with guide system ensure that the edgebanding always lands correctly on your panel. The height and thickness of the edge band is very easy to adjust using the millimetre control. Finally, the machine also has an adjustable glue dosage so that you always use the right quantity for your workpiece.
Choice of table with model PEB200+ or PEB250+. Both are suitable for gluing the same types of panels with one important difference. The model PEB250+ has speed and temperature control. This makes this model more suitable for use on round or moulded panels. The table is equipped with a holder for rolls and a manual end cutter. The edge bander can be easily removed from the table for mobile work. In that case you must use pre-cut edge bands.
Patented glue pot
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain. This also means that you can use other colored adhesives quickly and without any problems. No additional adjustments are required to change the glue between two projects, even if it's differently colored. The adhesive rollers have been polymerised to prevent damage to your edge bands.
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
ReadytoWORK package de la scie à panneaux ITAMAC Maestro X9 3200mm comprenant l'unité d'extraction, le tuyau d'extraction, les bandes de serrage, les colliers de fixation etc. et le jeu de la lame de scie principale et inciseur pour la finition de la panneaux. Scies à panneaux avec large table à rouleaux en aluminium anodisé sur double guide-barre résistant à l'usure avec rouleaux remplaçables. Équipé d'un système de démarrage / arrêt de module intégré qui garantit un confort d'utilisation optimal.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. The router bit is solid carbide, with special micrograin finishing for best performance. Thanks to these combined qualities the router bit delivers high quality results for all your projects and a long working life. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Foret forstner avec queue cylindrique pour percer des charnières invisibles dans le plupart des bois ou panneaux. Cette mèche charnière de haute qualité avec pointe de centrage, deux faces de découpage en widia et deux guides en widia vous assure une finition parfait de tous vos trous. Rotation à droite uniquement.
Cette mèche est disponible en deux longueurs
Set de couteaux profilés hauteur 40mm Nr. 0013 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Weight
5 kg
1 kg
0,5 kg
0,05 kg
0,26 kg
5 kg
0,93 kg
2 kg
3 kg
16,5 kg
0,45 kg
53 kg
2 kg
0,02 kg
1 kg
30 kg
1 kg
900 kg
0,05 kg
0,05 kg
0,05 kg
Dimensions
ND
ND
ND
ND
11,3 × 5 cm
ND
ND
ND
38 cm
ND
4 cm
1020 × 305 × 470 cm
ND
ND
ND
ND
ND
ND
ND
ND
0,4 cm
Additional information
Poids
5 kg
Connexion d\'extraction
63 mm
Poubelle
99L
Poids
1 kg
Diamètre
160mm
Diamètre de l\' arbre
30 mm
Faces de coupe
2
Hauteur de rainure
50mm
RPM Min-Max
5000-7500
Poids
0,5 kg
Poids
0,05 kg
Longueur
7,4cm
Poids
0,26 kg
Dimensions
11,3 × 5 cm
Poids
5 kg
Connexion d\'extraction
63 mm
Poubelle
99L
Poids
0,93 kg
Poids
2 kg
Poids
3 kg
Dimensions
38 cm
Voltage
230 V
Puissance
800W
RPM Min-Max
1200-3900
Borstel
110x115x19mm
Poids
16,5 kg
Capacité d\'épaisseur
5-103mm
Nombre de couteaux
2
Largeur de rabotage
250 mm
Poids
0,45 kg
Dimensions
4 cm
Poids
53 kg
Dimensions
1020 × 305 × 470 cm
Entrepointes
508 mm
Voltage
230 V
Filetage
M33
Cône de poupée mobile
MT 2
Diamètre de tournage en guidage
320 mm
Course de la contre-pointe
63 mm
RPM Min-Max
250 – 3850
Tête rotative
Non
Poids
2 kg
Schacht boor
6,35 mm
Boordiameter
9,5 mm
Min. materiaaldikte
13 mm
Max. materiaaldikte
38 mm
Poids
0,02 kg
Aanpassing diameter schacht
19 – 15,9, 25 – 15,9
Poids
1 kg
Afmetingen werkvlak
150x150mm
Force de fixation
800gr/cm² à 6 bar
Werkdruk
5,5-7 bar
Luchtverbruik bij 5,5 bar
28l/min
Poids
30 kg
Met kantenlijmer
PEB200+, PEB250+
Puissance
830W
Inhoud lijmbak
230cm³
Temperatuur (met PEB200+)
170°C
Werksnelheid (met PEB200+)
3.6m/min
Temperatuur (met PEB250+)
120 – 200°C
Werksnelheid (met PEB250+)
2-6m/min
Min-Max. hoogte band
10-62mm
Min-Max. dikte band
0.4-3mm
Poids
1 kg
Poids
900 kg
Poids
0,05 kg
Diamètre
4mm
Longeur de coupe
11mm
Longueur
51mm
Faces de coupe
2+1
Poids
0,05 kg
Diamètre
20mm
Longueur
90mm, 120mm
Queue
10x100mm, 10x60mm
Poids
0,05 kg
Dimensions
0,4 cm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy