L'Air Flux® Dusty AF-7000-DC est un aspirateur industriel doté d'une grande capacité de collecte et d'un faible niveau sonore. La construction robuste en tôle d’acier pesant 250 kg abrite un moteur triphasé de 400 V qui génère 7,5 ch et est doté d’une grande hélice dont la vitesse est de 1440 t/min (au lieu des 2880 t/min habituels), ce qui garantit une extraction très silencieuse. En outre, l'aspirateur est équipé de 8 sacs filtrants (5 microns) en haut et de 3 sacs résiduels d'un diamètre de 600 mm en bas.
Levage facile et sûr des panneaux de porte, meubles, ... Cet ascenseur de porte a une capacité de charge allant jusqu'à 200 kg. Équipé d'une base pivotante et d'une surface antidérapante. Fabriqué en aluminium. Hauteur maximale de levage 75cm.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Grâce à son support en oxyde d'aluminium brun et lin, le DuroFlap offre une finition homogène et de haute qualité lorsqu'il est utilisé sur l'acier, l'acier inoxydable et les métaux non ferreux.
Disponible dans différentes tailles de grains.
Replacement waste bags PVC 120µm to be used with the Air Flux 3000CKH Cyclone. These bags are to be used in the waste bin.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Set profielmessen hoogte 40mm Nr. 0020 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set de couteaux profilés hauteur 40mm Nr. 0057 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Using this easy upgrade you are able to elavate the filtration of your Air Flux Dust Extractor up to 30 times, significantly improving the air quality in your workshop. The high quality folded filter catches dust and finer particles down to 1µm, compared to 30µm for the standard filter and 5µm for the fibre filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove all dust piled up in the folds of the filter, the dust will fall down in the PVC waste bags below.
Wall-mounted blast gate, diameter 100mm, for use in combination with the Air Flux dust extraction systems.
Set de couteaux profilés hauteur 40mm Nr. 0038 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Deze verstelbare afschuinfrees met snijvlakken in hoogwaardig hardmetaal, geeft u een enorme flexibiliteit bij het maken van schuine kanten. De frees is aan beide zijden instelbaar tussen 0° en 70° met stappen van 1°. Gebruik de frees zowel voor het afschuinen van hout als plaatmateriaal. Dankzij de hardmetalen messen snijdt deze groeffrees moeiteloos door massieve platen, harde en zachte houtsoorten, MDF of gelamineerde platen.
Maximale freeshoogte bij 0° is 48mm, bij 70° is dit 15mm.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
De verstelbare rollensteun ondersteund werkstukken tot 40 kg en is zowel horizontaal als verticaal te gebruiken. Chroom geplateerde roller met kogellagers met een Heavy-Duty basis. De basis is voorzien van een klem die op elk oppervlakte kan geplaatst worden tot 6,5cm dikte. Hoogte verstelling van 8cm – 40cm ten opzichte van de klem. De rollensteun is snel demonteerbaar om weg te bergen wanneer je hem niet gebruikt.
Double outlet Ø125mm to be used with Air Flux Cyclone Dust Extractors. The large diameter measures 203mm, which can be mounted on the cyclone dust extractors, with branching to 2x125mm.
The BELMASH PC 3000 panel carrier is designed to facilitate work with large workpieces (plywood, laminated chipboard, MDF, etc.).
Thanks to the robust and mobile design of the panel carrier, workpieces up to a thickness of 40 mm can be easily moved to the machine or workbench. The panel carrier is equipped with swivel castors, an adjustable height and is tiltable (vertically - horizontally) by means of a convenient click system. The adjustable height of this plate carrier means that it can be used on all machines and/or work tables. By adjusting it to the right height and placing it behind a machine, it can also be used as a table-top output.
The design of the panel carrier allows panels weighing up to 100 kg to be moved by one person, which significantly increases productivity and reduces costs.
The Verticut TT1225 WPM is a very budget-friendly and space-saving vertical panel sawing machine for panels of 2500 x 1220 mm.
Ce profilé en aluminium de 3 mètres peut être utilisé comme guide sur nos lits à rouleaux et tables.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Guide rail or jig for circles and ovals with maximum diameter and main axis 3200mm. This compass is ideal for making mirrors, windows, doors, or any other creation with a circular or elliptical shape. To mill out an elliptical shape, use both swivel supports and elongated guides. By using just one of the two swivel supports you can mill perfect circles. Place the support exactly in the centre of the mould to make circles.
The guide rail is equipped with two powerful suction cups to attach to your panels without damage. If it is not possible to use the suction cups (e.g. on porous materials), the mould is provided with holes to screw them on. Standard delivery with two rods (Ø8mm) to attach the router to the guide.
Capot à poussière en PVC noir avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La dimension de l'ouverture est 340x180mm.
Connector met diameter 100mm om meerdere stukken afzuigslang op elkaar aan te sluiten. Om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Reserve pomp voor alle PIHER zuignappen die gebruik maken van een pomp.
Zaagblad met 64 tanden.
Universeel zaagblad met FZ/TR 'triple chip' tanden (vlakdaktand) geschikt voor het verzagen van hol aluminium, aluminium panelen, gelamineerde materialen, PVC, hout met resten van beton, spijkers of schroeven en solid surface materialen zoals Corian, Hi-Macs of Kerrock.
Set profielmessen hoogte 40mm Nr. 0086 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Elleboogstuk met hoek van 90° en diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen.
Dankzij het unieke gesegmenteerde ontwerp van de slang kan deze uitzetten, samentrekken en draaien tot de vorm die het beste werkt voor uw ruimte en houdt die positie dan vast, waardoor u bijna onbeperkte mogelijkheden heeft om uw stofopvangsysteem te verbeteren. De slang heeft een lengte van 30 tot 90 cm. Het vermogen om rond obstakels te buigen, uit te zetten of in te krimpen om perfect in een bepaalde ruimte te passen en zijn vorm te behouden, maakt de FlexHold-slang ideaal voor krappe plekken en lastige stofopvangtoepassingen waar conventionele slangen gewoon niet werken. U vindt talloze manieren om dit slimme product te gebruiken.
Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Straight router bits from Sistemi Klein ensure smooth and well-finished edges. Suitable for trimming and milling with portable routers. Work more easily using the ball bearing on the shank.
Two flutes provide fast cutting and good chipping ejection. Thanks to the cutting edges in high quality carbide metal, you can use this bit effortlessly on most types of wood.
Vloerstuk met diameter buis 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. Bevestig het vloerstuk op de grond en veeg eenvoudig stof en schavelingen in de opening om alles op te zuigen.
La mèche de 5 mm est étagée de manière à s'adapter exactement aux guides de perçage du gabarit de perçage pour les chevilles de planche. La perceuse est équipée d'un anneau d'arrêt et d'une clé Allen.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Ces supports en acier à ressort galvanisé se montent au mur en quelques secondes et sont parfaits pour ranger des outils ou des accessoires d'un diamètre de 10 cm, tels que les nouveaux accessoires Air Flux. Les pièces de montage, le tuyau d'extraction flexible et d'autres outils avec un Ø 100 mm s'adaptent parfaitement ici.
Content
L'Air Flux® Dusty AF-7000-DC est un aspirateur industriel doté d'une grande capacité de collecte et d'un faible niveau sonore. La construction robuste en tôle d’acier pesant 250 kg abrite un moteur triphasé de 400 V qui génère 7,5 ch et est doté d’une grande hélice dont la vitesse est de 1440 t/min (au lieu des 2880 t/min habituels), ce qui garantit une extraction très silencieuse. En outre, l'aspirateur est équipé de 8 sacs filtrants (5 microns) en haut et de 3 sacs résiduels d'un diamètre de 600 mm en bas.
Levage facile et sûr des panneaux de porte, meubles, ... Cet ascenseur de porte a une capacité de charge allant jusqu'à 200 kg. Équipé d'une base pivotante et d'une surface antidérapante. Fabriqué en aluminium. Hauteur maximale de levage 75cm.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Grâce à son support en oxyde d'aluminium brun et lin, le DuroFlap offre une finition homogène et de haute qualité lorsqu'il est utilisé sur l'acier, l'acier inoxydable et les métaux non ferreux. Il donne une finition excellente et constante sur une longue période et est universellement applicable au métal et à l'acier inoxydable.
Replacement waste bags PVC 120µm to be used with the Air Flux 3000CKH Cyclone. These bags are to be used in the waste bin.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Set profielmessen hoogte 40mm Nr. 0020 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set de couteaux profilés hauteur 40mm Nr. 0057 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Using this easy upgrade you are able to elavate the filtration of your Air Flux Dust Extractor up to 30 times, significantly improving the air quality in your workshop. The high quality folded filter catches dust and finer particles down to 1µm, compared to 30µm for the standard filter and 5µm for the fibre filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove all dust piled up in the folds of the filter, the dust will fall down in the PVC waste bags below.
Wall-mounted blast gate, diameter 100mm, for use in combination with the Air Flux dust extraction systems.
Set de couteaux profilés hauteur 40mm Nr. 0038 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Deze verstelbare afschuinfrees met snijvlakken in hoogwaardig hardmetaal, geeft u een enorme flexibiliteit bij het maken van schuine kanten. De frees is aan beide zijden instelbaar tussen 0° en 70° met stappen van 1°. Gebruik de frees zowel voor het afschuinen van hout als plaatmateriaal. Dankzij de hardmetalen messen snijdt deze groeffrees moeiteloos door massieve platen, harde en zachte houtsoorten, MDF of gelamineerde platen.
Maximale freeshoogte bij 0° is 48mm, bij 70° is dit 15mm.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
De verstelbare rollensteun ondersteund werkstukken tot 40 kg en is zowel horizontaal als verticaal te gebruiken. Chroom geplateerde roller met kogellagers met een Heavy-Duty basis. De basis is voorzien van een klem die op elk oppervlakte kan geplaatst worden tot 6,5cm dikte. Hoogte verstelling van 8cm – 40cm ten opzichte van de klem. De rollensteun is snel demonteerbaar om weg te bergen wanneer je hem niet gebruikt.
Double outlet Ø125mm to be used with Air Flux Cyclone Dust Extractors. The large diameter measures 203mm, which can be mounted on the cyclone dust extractors, with branching to 2x125mm.
The BELMASH PC 3000 panel carrier is designed to facilitate work with large workpieces (plywood, laminated chipboard, MDF, etc.).
Thanks to the robust and mobile design of the panel carrier, workpieces up to a thickness of 40 mm can be easily moved to the machine or workbench. The panel carrier is equipped with swivel castors, an adjustable height and is tiltable (vertically - horizontally) by means of a convenient click system. The adjustable height of this plate carrier means that it can be used on all machines and/or work tables. By adjusting it to the right height and placing it behind a machine, it can also be used as a table-top output.
The design of the panel carrier allows panels weighing up to 100 kg to be moved by one person, which significantly increases productivity and reduces costs.
The Verticut TT1225 WPM is a space-saving vertical panel saw for panels of 2500 x 1220 mm.
This is a very budget-friendly machine for all your sawing needs. The professional weighted support arm can be moved horizontally and the saw on the support arm is vertically adjustable. This makes the machine unique in its kind, offering the best value for money on the market.
It has a fully welded frame with precision-hardened runners at the bottom and top. The heavy duty support arm/mast runs very smoothly thanks to the wear-resistant bar guide with double ball bearings. A height aid is provided for processing small sheets, saving you time and preventing unnecessary strain on your back.
The red horizontal panel supports can be easily adjusted manually with the convenient elevator arm, to avoid sawing them in when sawing horizontally. The support at the bottom on which the panel rests is equipped with wear-resistant plastic listels.
It also features easily adjustable flip stops and an extraction hose.
This panel saw is also available for 3200 x 1600 mm panels.
Ce profilé en aluminium de 3 mètres peut être utilisé comme guide sur nos lits à rouleaux et tables.
Il est doté de 2 arrêts rabattables et est livré avec des supports de montage pour le montage sur le lit à rouleaux ou la table.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Guide rail or jig for circles and ovals with maximum diameter and main axis 3200mm. This compass is ideal for making mirrors, windows, doors, or any other creation with a circular or elliptical shape. To mill out an elliptical shape, use both swivel supports and elongated guides. By using just one of the two swivel supports you can mill perfect circles. Place the support exactly in the centre of the mould to make circles.
The guide rail is equipped with two powerful suction cups to attach to your panels without damage. If it is not possible to use the suction cups (e.g. on porous materials), the mould is provided with holes to screw them on. Standard delivery with two rods (Ø8mm) to attach the router to the guide.
Capot à poussière en PVC noir avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La dimension de l'ouverture est 340x180mm.
Connector met diameter 100mm om meerdere stukken afzuigslang op elkaar aan te sluiten. Om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Reserve pomp voor alle PIHER zuignappen die gebruik maken van een pomp.
Zaagblad met 64 tanden.
Universeel zaagblad met FZ/TR triple chip tanden (vlakdaktand) geschikt voor het verzagen van hol aluminium, aluminium panelen, gelamineerde materialen, PVC, hout met resten van beton, spijkers of schroeven en solid surface materialen zoals Corian, Hi-Macs of Kerrock. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede.
Set profielmessen hoogte 40mm Nr. 0086 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Elleboogstuk met hoek van 90° en diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen.
Dankzij het unieke gesegmenteerde ontwerp van de slang kan deze uitzetten, samentrekken en draaien tot de vorm die het beste werkt voor uw ruimte en houdt die positie dan vast, waardoor u bijna onbeperkte mogelijkheden heeft om uw stofopvangsysteem te verbeteren. De slang heeft een lengte van 30 tot 90 cm. Het vermogen om rond obstakels te buigen, uit te zetten of in te krimpen om perfect in een bepaalde ruimte te passen en zijn vorm te behouden, maakt de FlexHold-slang ideaal voor krappe plekken en lastige stofopvangtoepassingen waar conventionele slangen gewoon niet werken. U vindt talloze manieren om dit slimme product te gebruiken.
Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Straight router bits from Sistemi Klein ensure smooth and well-finished edges. Suitable for trimming and milling with portable routers. Work more easily using the ball bearing on the shank.
Two flutes provide fast cutting and good chipping ejection. Thanks to the cutting edges in high quality carbide metal, you can use this bit effortlessly on most types of wood.
Vloerstuk met diameter buis 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. Bevestig het vloerstuk op de grond en veeg eenvoudig stof en schavelingen in de opening om alles op te zuigen.
La mèche de 5 mm est étagée de manière à s'adapter exactement aux guides de perçage du gabarit de perçage pour les chevilles de planche. La perceuse est équipée d'un anneau d'arrêt et d'une clé Allen.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Ces supports en acier à ressort galvanisé se montent au mur en quelques secondes et sont parfaits pour ranger des outils ou des accessoires d'un diamètre de 10 cm, tels que les nouveaux accessoires Air Flux. Les pièces de montage, le tuyau d'extraction flexible et d'autres outils avec un Ø 100 mm s'adaptent parfaitement ici.
Weight
250 kg
1,1 kg
0,05 kg
0,300 kg
0,5 kg
0,05 kg
0,05 kg
0,05 kg
11 kg
0,5 kg
0,05 kg
1 kg
0,05 kg
2,70 kg
2 kg
27 kg
350 kg
15 kg
0,05 kg
3 kg
0,5 kg
0,05 kg
0,05 kg
0,02 kg
1 kg
0,05 kg
0,5 kg
0,5 kg
0,05 kg
0,05 kg
0,5 kg
0,2 kg
0,05 kg
0,2 kg
Dimensions
215 × 107 × 39 cm
ND
ND
10 × 12 cm
ND
ND
0,4 cm
0,4 cm
53 × 53 × 65 cm
ND
0,4 cm
ND
ND
45 cm
ND
159 × 61,4 × 115 cm
3600 × 1900 × 1200 cm
ND
ND
ND
34 × 18 cm
ND
ND
ND
ND
0,4 cm
ND
ND
0,4 cm
ND
ND
ND
ND
ND
Additional information
Poids
250 kg
Dimensions
215 × 107 × 39 cm
Moteur
7.5 CV
Voltage
3 x 400V
Sortie
330 mm – 6 x 127 mm
Air Speed
241 m³/min
Ventilateur
330mm
Poids
1,1 kg
Supporte
100kg
Poids
0,05 kg
Diamètre
18mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2+1
Poids
0,300 kg
Dimensions
10 × 12 cm
Grain
K60, K120
Poids
0,5 kg
Poids
0,05 kg
Diamètre
28,6mm
Longeur de coupe
13mm
Longueur
51mm
Rayon
R8
Queue
8mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
11 kg
Dimensions
53 × 53 × 65 cm
Poids
0,5 kg
Diamètre
100mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1 kg
Diamètre
160mm
Diamètre de l\' arbre
30 mm
Faces de coupe
2
Hauteur de rainure
50mm
RPM Min-Max
5000-7500
Poids
0,05 kg
Diamètre
14mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2+1
Poids
2,70 kg
Dimensions
45 cm
Supporte
40kg
Poids
2 kg
Poids
27 kg
Dimensions
159 × 61,4 × 115 cm
Draagvermogen
100 kg
Poids
350 kg
Dimensions
3600 × 1900 × 1200 cm
Vitesse de la lame de scie
5500
Diamètre lame de scie
165mm
Puissance
1700W
Voltage
230 V
Mast
Manual
Epaisseur de coupe maximale
60 mm
Epaisseur de coupe maximale à 45°
45 mm
Hauteur de coupe maximale
1225 mm
Longueur de coupe maximale
2500 mm
Poids
15 kg
Longueur
3000 mm
Poids
0,05 kg
Diamètre
6mm
Longeur de coupe
19mm
Longueur
63mm
Queue
12mm
Faces de coupe
2
Poids
3 kg
Minimum kleine as (ellips)
600mm
Maximum grote as (ellips)
3200mm
Minimum diameter (cirkel)
600mm
Maximum diameter (cirkel)
3200mm
Poids
0,5 kg
Dimensions
34 × 18 cm
Diamètre
100mm
Poids
0,05 kg
Diamètre
100mm
Poids
0,05 kg
Diamètre
16mm
Longeur de coupe
19mm, 25mm, 32mm
Longueur
51mm, 57mm, 63mm
Faces de coupe
2
Poids
0,02 kg
Pour les articles
30100, 30110, 30131, 30132
Poids
1 kg
Diamètre lame de scie
216mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,0mm
Epaisseur lame de scie
2,0mm
nombre de dents
64
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,5 kg
Diamètre
100mm
Poids
0,5 kg
Diamètre
63,5mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Diamètre
25,4mm
Longeur de coupe
45mm
Longueur
95mm
Queue
12mm
Faces de coupe
2
Poids
0,5 kg
Diamètre
100mm
Poids
0,2 kg
Poids
0,05 kg
Diamètre
30mm
Longeur de coupe
32mm
Longueur
73mm
Queue
12mm
Faces de coupe
2
Poids
0,2 kg
Diamètre
100mm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy