Filtre supplémentaire Air Flux Dusty AF-1100/45. Facile à remplacer, avec sac filtrant protection disponible séparément. Filtration jusqu'à 5µm.
OUTLET, couleur bleue - nouvelle machine
L’aspirateur Air Flux® Dusty AF-750MDC est un aspirateur compacte et vertical pour des copeaux et des poussières métalliques. Il est équipé d’un moteur à induction puissante de 230V et 1CV. Le châssis en acier en combinaison avec un lame de rotor de 280mm vous assurent une collecte efficace des poussières métalliques. La poussière est collecté dans un fût de 30L. Le Dusty AF-750MDC est équipé de deux portes d’accès de 100mm pour la poussière.
Convient pour les ponceuses à métaux, les ponceuses à pied, les machines à chanfreiner et autres machines à travailler les métaux.
Entry-level planer thicknesser from the Revolution range of professional woodworking machines. Powerful and robust machine with a three-phase 400V induction motor that delivers 4.5 HP. This surface planer thicknesser has a planing capacity of up to 320 mm and a thicknessing table with a maximum passage height of 230 mm. Thanks to its sturdy steel design with cast iron worktops, it can withstand heavy daily use. The work tables are fitted with a heavy profile at the bottom to maintain their flatness at all times. The tables are hinged independently and can be raised. For very precise planing, this machine is equipped with a sturdy, aluminium guide at the top. This guide can be set at an angle with two stops for 90° and 45°.
This machine is equipped as standard with planing knives of 3 mm thickness.
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. On top of this, the top plate can be rotated 360°. The support must be secured with clamps (not included).
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling.
Sacs supplémentaires en PVC 120µm pour la poubelle de l'aspirateur Air Flux 3000CKH. Ces sacs sont approprié pour utilisation sous le filtre.
Identical to model LRE84H but with electronic speed control. Lightweight and powerful mini orbital sander for polishing and finishing your workpieces. The ergonomic design ensures a perfect grip and comfortable working. All the controls are easily accessible while working. Standard delivery with Delta attachment for sanding hard-to-reach areas such as corners or blinds. The Delta piece is provided with velcro at both top and bottom to attach sandpaper. Optionally, a round sanding plate is also available for this machine. Equipped with an integrated dust extractor and dust bag.
Universeel links-rechts getand zaagblad geschikt voor het verzagen van verschillende houtsoorten of houten platen. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk in massief hout. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede in zowel massief hout als plaatmateriaal.
Verkrijgbaar met verschillend aantal tanden.
SHOWROOM MODEL, old colours 2022
The Air Flux3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Ce kit professionnel comprend six pièces et se compose de scies cloches diamantées TCT de haute qualité. L'ensemble est résistant et possède des dents robustes qui garantissent la durabilité et une plus longue durée de vie. La zone des copeaux a été améliorée, ce qui permet un retrait rapide des copeaux. Ce jeu de scies cloches convient à la découpe de plaques de plâtre, de béton cellulaire, de bois, de stratifiés et de PVC. L'ensemble comprend un foret de centrage et cinq forets de cloche différents de 35, 40, 54, 60 et 65 millimètres de diamètre.
Pack promotionnel de la scie à ruban TT312 comprenant l'aspirateur, le tuyau d'extraction, les bandes de serrage et le support de rouleau. Scie à ruban équipée d'un moteur à induction de 230V et de deux vitesses. Les roues de démarrage guident la lame de scie à la fois au-dessus et en dessous de la table de travail pour un guidage optimal. La table de travail de cette scie à ruban est entièrement en fonte et peut être inclinée jusqu'à 45°.
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
This multifunctional position guide easily replaces all other guides or moulds. The T multi guide is an indispensable tool for making furniture, cabinets,... The high-precision drill guide allows you to carry out all drillings with a distance of 32mm (or more) correctly. Use this guide for: handles on doors and slides, holes for shelves, hinges or drawer guides. As an option, you can also use an extension piece to drill longer driving holes with a distance of 32mm. These extensions are available separately per set of two.
The guide has a central borehole and two adjustable boreholes in hardened steel. The basic length for this guide is 320mm. This can be extended up to 810mm with the optional extensions. Standard delivery with a Ø5mm drill bit.
Handige alles in één set om zwaluwstaartverbindingen te maken met de Virutex PL11. De set bestaat onder meer uit een wisselbare PVC mal met tandafstand (pas) 16mm, een aangepaste kopieerring Ø12mm en de correcte zwaluwstaartfrees Ø9,5mm. Gebruik deze set om kleine zwaluwstaartverbindingen te maken (bijvoorbeeld voor juwelenkistjes). Minimumdikte van het hout om correct te kunnen werken is 11mm.
Content
Filtre supplémentaire Air Flux Dusty AF-1100/45. Facile à remplacer, avec sac filtrant protection disponible séparément. Filtration jusqu'à 5µm.
L’aspirateur Air Flux® Dusty AF-750MDC est un aspirateur compacte et vertical pour des copeaux et des poussières métalliques. Il est équipé d’un moteur à induction puissante de 230V et 1CV. Le châssis en acier en combinaison avec un lame de rotor de 280mm vous assurent une collecte efficace des poussières métalliques. La poussière est collecté dans un fût de 30L. Le Dusty AF-750MDC est équipé de deux portes d’accès de 100mm pour la poussière.
Convient pour les ponceuses à métaux, les ponceuses à pied, les machines à chanfreiner et autres machines à travailler les métaux.
Entry-level planer thicknesser from the Revolution range of professional woodworking machines. Powerful and robust machine with a three-phase 400V induction motor that delivers 4.5 HP. This surface planer thicknesser has a planing capacity of up to 320 mm and a thicknessing table with a maximum passage height of 230 mm. Thanks to its sturdy steel design with cast iron worktops, it can withstand heavy daily use. The work tables are fitted with a heavy profile at the bottom to maintain their flatness at all times. The tables are hinged independently and can be raised. In this way, you can make maximum use of the capabilities of the thicknessing machine.
This thicknessing machine is easily adjustable by means of a smoothly rotating, steplessly spinning wheel. Equipped with a millimetre scale so you can easily read off the correct height. During work, the thicknessing unit remains in position without any problems thanks to the locking device. In combination with the feed speed of 7m/min, this ensures a very smooth, even finish on all your workpieces.
For very precise planing, this machine is equipped with a sturdy, aluminium guide at the top. This guide can be set at an angle with two stops for 90° and 45°. With the help of the heavy planing block, equipped with three planing blades, a good finish is always guaranteed. The chips are discharged via a hinged hood. This hood can be connected to a dust extraction system using the Ø120mm outlet. This machine is equipped as standard with planing knives of 3 mm thickness.
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. On top of this, the top plate can be rotated 360°. The support must be secured with clamps (not included). Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, the optional SVE680 auxiliary support is available. This support is specifically designed to connect to the SVE660 or SVE670 model. Standard delivery with one rubber seal already installed.
Sacs supplémentaires en PVC 120µm pour la poubelle de l'aspirateur Air Flux 3000CKH. Ces sacs sont approprié pour utilisation sous le filtre.
Identical to model LR84H but with electronic speed control. Lightweight and powerful mini orbital sander for polishing and finishing your workpieces. The ergonomic design ensures a perfect grip and comfortable working. All the controls are easily accessible while working. Standard delivery with Delta attachment for sanding hard-to-reach areas such as corners or blinds. The Delta piece is provided with velcro at both top and bottom to attach sandpaper. Optionally, a round sanding plate is also available for this machine. Equipped with an integrated dust extractor and dust bag.
Universeel links-rechts getand zaagblad geschikt voor het verzagen van verschillende houtsoorten of houten platen. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk in massief hout. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede in zowel massief hout als plaatmateriaal. Verkrijgbaar met verschillend aantal tanden.
The Air Flux 3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Ce kit professionnel comprend six pièces et se compose de scies cloches diamantées TCT de haute qualité. L'ensemble est résistant et possède des dents robustes qui garantissent la durabilité et une plus longue durée de vie. La zone des copeaux a été améliorée, ce qui permet un retrait rapide des copeaux. Ce jeu de scies cloches convient à la découpe de plaques de plâtre, de béton cellulaire, de bois, de stratifiés et de PVC. L'ensemble comprend un foret de centrage et cinq forets de cloche différents de 35, 40, 54, 60 et 65 millimètres de diamètre.
Pack promotionnel de la scie à ruban TT312 comprenant l'aspirateur, le tuyau d'extraction, les bandes de serrage et le support de rouleau. Scie à ruban équipée d'un moteur à induction de 230V et de deux vitesses. Les roues de démarrage guident la lame de scie à la fois au-dessus et en dessous de la table de travail pour un guidage optimal. La table de travail de cette scie à ruban est entièrement en fonte et peut être inclinée jusqu'à 45°.
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
This multifunctional position guide easily replaces all other guides or moulds. The T multi guide is an indispensable tool for making furniture, cabinets,... The high-precision drill guide allows you to carry out all drillings with a distance of 32mm (or more) correctly. Use this guide for: handles on doors and slides, holes for shelves, hinges or drawer guides. As an option, you can also use an extension piece to drill longer driving holes with a distance of 32mm. These extensions are available separately per set of two.
The guide has a central borehole and two adjustable boreholes in hardened steel. The basic length for this guide is 320mm. This can be extended up to 810mm with the optional extensions. Standard delivery with a Ø5mm drill bit.
Handige alles in één set om zwaluwstaartverbindingen te maken met de Virutex PL11. De set bestaat onder meer uit een wisselbare PVC mal met tandafstand (pas) 16mm, een aangepaste kopieerring Ø12mm en de correcte zwaluwstaartfrees Ø9,5mm. Gebruik deze set om kleine zwaluwstaartverbindingen te maken (bijvoorbeeld voor juwelenkistjes). Minimumdikte van het hout om correct te kunnen werken is 11mm.
Weight
1 kg
38 kg
315 kg
1 kg
0,5 kg
1,5 kg
1 kg
300 kg
1 kg
120 kg
1 kg
0,35 kg
0,5 kg
Dimensions
ND
46 × 57 × 118 cm
120 × 160 × 70 cm
ND
ND
ND
ND
730 × 1730 × 2280 cm
ND
ND
ND
320 × 215 cm
ND
Additional information
Poids
1 kg
Poids
38 kg
Dimensions
46 × 57 × 118 cm
Moteur
1 PK
Voltage
230 V
Sortie
2x100mm
Air Speed
1100m³/h
Ventilateur
280mm
Niveau sonore
80dB
Poubelle
30L
Poids
315 kg
Dimensions
120 × 160 × 70 cm
Moteur
4.5 CV
Voltage
3 x 400V
Largeur de rabotage
320mm
Schaaftafel afmetingen
1500x320mm
Ø schaafas
85mm
Nominale snelheid schaafas
5000rpm
Aantal schaafmessen
3
Schaafmes afmetingen
320x35x3mm
Max. schaafdiepte
4mm
Vandiktetafel afmetingen
316x600mm
Doorlaathoogte vandikte
230mm
Vandikte afname
3mm
Aanvoersnelheid vandikte
7m/min
Poids
1 kg
Puissance
95W
Afmetingen werkvlak
150x150mm
Vacuümdruk
750mbar
Poids
0,5 kg
Poids
1,5 kg
Puissance
180W
Schuuroppervlakte
80x130mm
Ø Rotatie
2mm
Nominale snelheid
12500rpm
Vibrations
25000/min
Poids
1 kg
Diamètre lame de scie
160mm
Diamètre de l\' arbre
16mm
Epaisseur dent
2,6mm
Epaisseur lame de scie
1,6mm
nombre de dents
24, 30, 48
Orifices de traction
2/6/32
Poids
300 kg
Dimensions
730 × 1730 × 2280 cm
Puissance
4PK
aantal filters
15
Filter afmetingen
160 x 1030 mm
filtratie oppervlakte
7.75 m2
afvalopslag
metal container (60x60x72cm)
capaciteit
3500m3
Poids
1 kg
Poids
120 kg
Poids
1 kg
Diamètre lame de scie
550mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
2,8mm
nombre de dents
56
Poids
0,35 kg
Dimensions
320 × 215 cm
Poids
0,5 kg
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy