Guide d'onglet de la classe supérieure. Flip-stop à réglage fin, angles standard fraisés, extension de la butée extensible
Si vous cherchez des accessoires pour votre table de sciage ou votre table à toupie dans la catégorie "sans compromis", vous venez de trouver !
L'ITAMAC Xact 36 appartient définitivement à la "classe non-plus-ultra" en termes de réglage, de précision, de stabilité et de finition. Un guide d'onglet absolument inégalé !
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Set profielmessen hoogte 40mm Nr. 0088 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container.
Attention: this hand gluer comes standard with a rubber roller, suitable for vinyl (white) adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T).
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Set profielmessen hoogte 40mm Nr. 0094 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lengte van deze boor is 150mm
Langgatboren met spaanbrekers, zowel links- als rechtsdraaiend verkrijgbaar. Deze boren zijn uiterst geschikt voor het boren van diepe gaten of sleuven in de meeste houtsoorten. Voorzien van twee snijvlakken in 18% HSS hoogwaardig staal en spaanbrekers.
Tuyau anti-statique longueur 15 mètre diamètre 100 mm A utiliser en combinaison avec les extracteurs de poussière Air Flux.
Stofhoed in zwart PVC met diameter buis 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. De grootte van de opening bedraagt 340x180mm.
Levage facile et sûr des panneaux de porte, meubles, ... Cet ascenseur de porte a une capacité de charge allant jusqu'à 200 kg. Équipé d'une base pivotante et d'une surface antidérapante. Fabriqué en aluminium. Hauteur maximale de levage 75cm.
Set profielmessen hoogte 40mm Nr. 0012 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
La TT2010 est une ponceuse polyvalente avec une bande à poncer de 2010 x 153 mm, une table de contour pour le ponçage circulaire et une buse d'aspiration.
set of two protective pads for Piher Max Quick 300.
Set profielmessen hoogte 50mm Nr. 2017 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0067 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw blade with 52 teeth
Saw blade with alternate top bevel teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Can also be used for sawing chipboard or single-sided laminated wood. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
Beweegbare bek voor gietijzeren lijmklem Maxipress F, systeem met volledig beschermde schroefdraad
Cette table à vide électrique sur pied basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. Pour que la table soit à vide, elle doit être connectée au système de fixation électrique à vide SVE600 de Virutex (inclus en standard). La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. Le support doit être fixé à l'aide de pinces (non comprises). Ce support est spécialement conçu pour se connecter au modèle SVE660 ou SVE670. Pas de connexion directe au système de fixation électrique de vide SVE600 comme le modèle SVE660 ou SVE670.
Set profielmessen hoogte 40mm Nr. 0021 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Deze cilindrische penboorkop werd speciaal ontwikkeld voor het draaien van houten pennen.
Set profielmessen hoogte 50mm Nr. 2071 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Showroommodel
The Itamac WL-508DC is a very stable, with vario-inverter speed control, left and right turning wood lathe with a turning diameter of 320 mm and 508 mm between the points. The speed can be regulated steplessly in 3 ranges between 250 and 3850 rpm. (250-750 / 550-1650 / 1300-3850 rpm). The vario-inverter can maintain a constant torque at any speed, so even at low rpm it still delivers very powerful torque. The motor is a low-noise DC motor of 1000 Watts.
Plug cutters to be used on all wood types. These straight wood plug cutters are used to make plugs to be inserted after having drilled with "Forstner" bits. Use the plugs after installing sunken screws and sand the top of the plug flush with the wood surface to create nearly invisible screw connections on your wood projects. This cutter has a lenght of 140mm and 4 SP cutting teeth.
Faites-en plus avec votre gabarit pour trous de poche 320 en ajoutant plus d'options pour l'espacement des trous. Ce kit comprend deux entretoises pour gabarits de perçage qui s'insèrent entre les guides de perçage, de sorte que vous pouvez facilement augmenter la distance entre les trous par incréments de 19 mm, en fonction de ce dont vous avez besoin pour votre projet. Placez les entretoises à côté des guides de perçage ou à côté d'une autre entretoise et serrez-les simplement.
Grooving saw blade with flat (FZ) tungsten teeth to be used for cutting grooves in hardwood, softwood, timber wood, and plastic coated panel. The sawing blades have a bore of 30mm and are ideally suited for use on all spindle moulding machines or sawing tables.
Saw blade available in different diameters
Ce guide de rotation 900 mm avec presseur est disponible en option pour les machines combinées TT320N2CU et TT410N2CU
Jeu de six bagues de remplissage en haute qualité avec un tolérance de 0,01. Les épaisseurs varient entre 0,1 mm et 1 mm avec des graduation de 0,1. Ces bagues sont disponibles avec un alésage de 30 mm (Ø45 mm) ou de 50 mm (Ø70 mm).
Met de Precisie Stock Guides hoef je niet te worstelen om platen of balken vast te houden tijdens het doorduwen op de zaag - en freestafel. De rollers trekken je werkstuk strak op zijn plaats tegen de geleider en je werktafel. Je zult veiliger, gemakkelijker en preciezer zagen terwijl je werkstuk altijd op z'n plek blijft.
Idéal pour la menuiserie en dehors de l'atelier. Facile à placer sur n'importe quelle table sans laisser de traces. Donne plus de sécurité et de précision dans votre travail. La conception avancée vous permet de positionner les pièces de différentes manières, tout en les tenant toujours bien en place. Sa robustesse exceptionnelle vous permet de serrer des pièces métalliques et d'effectuer des travaux de précision. Sterk, aluminium ontwerp met kaken in hars waardoor u schade aan het werkstuk vermijdt.
Professional, powerful Virutex chamfering planer with a base plate with a V-profile of 90°. This is why the CE89E is perfectly suited for chamfering work on all your projects. Thanks to its high power, this planer can make a chamfer of up to 25mm width in a single passage. As standard, the unit is equipped with a set of reversible blades in high-quality carbide (widia). After replacement, the blades do not need to be re-adjusted. The shavings are ejected through the exhaust on the right side.
Standard delivery in a handy PVC case with connector for dust extraction. Optionally available with a base for stationary use of the CE89E.
Broche à démontage rapide pour les perceuses multibroches Line Driller TT21EBM1 et TT23EBM2.
Cutter head in light metal with reversible blades in high quality carbide (HW) to create beautiful profiles on your furniture or door panels. The maximum length of this panel raising profile is 54mm. The cutter head comes in a sturdy plastic case, with key to easily replace the knives. To get even more out of your cutter head, a total of six profile knives are available. Profile knife A is mounted on the cutter head as standard. The other knives, type B, C, D and E are available separately. Thanks to the tungsten carbide blades, this profile cutter cuts effortlessly through solid boards or solid wood. Also suitable for use on MDF.
Available with bore 30mm or 50mm.
LA POUSSIÈRE DE BOIS EST DANGEREUSE POUR VOTRE SANTÉ : Un système d'extraction de poussière approprié joue un rôle dans un environnement de travail sûr et sain qui ne doit pas être sous-estimé.
Contrairement aux autres protections standard qui offrent une protection limitée de la lame de la scie et un mauvais contrôle de la poussière, l'ITAMAC Orca S17 est la protection ultime conçue pour un environnement de travail plus sûr, des ateliers plus propres et une expérience de travail agréable sur votre scie à table. La protection transparente est réglable en hauteur et équipée d'un raccord de Ø 100 mm qui assure une extraction efficace. Ce grand raccord assure une aspiration optimale sans perte de vitesse de l'air comme c'est le cas avec d'autres bouchons de protection de petit diamètre. Peut être utilisé sur presque tous les types de scies à table : Le bras supérieur en acier robuste s'écarte et revient en douceur en position de travail. Le couvercle de protection transparent est facile à soulever pour un accès rapide à la lame de scie. Le bras supérieur est réglable télescopiquement de +/-880 mm à un maximum de +/- 1700 mm et s'adapte donc à 99% de toutes les scies à table, y compris Itamac, SawStop, Harvey, Grizzly et bien d'autres.REMARQUE : Cette capot d'aspiration est universelle et s'adapte donc à toutes les autres tables de scie circulaire classiques !
CONSULTEZ LA BROCHURE ITAMAC ICI
Anneau de réduction pour réduire l'alésage de lames de scie en fonction de votre machine. Rendez chaque lame de scie compatible avec votre propre table de sciage grâce à cet bague de réduction très pratique.
Réduction d'alésage 30mm à 16mm.
L'unité de rabotage est un outil indispensable pour le rabotage d'épaisseur sur le Belmash SDM2500 et permet d'obtenir une pièce d'excellente qualité. Il possède son propre bloc de coupe qui est entraîné par le moteur du SDM2500. Avec cet appareil, vous pouvez prévoir une épaisseur sur le SDM2500 de 5 à 103 mm et une largeur de rabotage de 250 mm.
Table de travail compacte, réglable en hauteur entre 720 mm et 1150 mm. Très facile à ranger grâce au plan de travail pliable (584x508mm). Capacité de charge maximale de 80 kg.
Last pieces!
The ADAMIK VC-5 vacuum pad is a double-sided suction pad that attaches to the workbench with a push. Thanks to this technology, it is easy to change the dimensions of the machined surface. The VC-5 suction cup is designed to clamp non-porous workpieces during banding, milling, cutting, grinding, drilling,
The big advantage of the VC-5 suction cup is the method of creating a vacuum using the Venturi system, which compresses the workpiece by compressed air from a conventional compressor.
The suction cup can be used both horizontally and vertically.
Saw blade with 24 teeth
Saw blade with flat, beveled (FZ/FA) teeth and anti-kickback design for cutting slab woods and boards, timber with parts of concrete and metal (nails, metal fittings), porous concrete blocks. For use on table saws.
Capot transparant avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La taille de l'ouverture du capot anti-poussière est de 200x200mm. Avec couverture.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
The Ultralight spring foams are suitable for the FeatherPRO and FeatherDUO featherboards. Ultralight springs are less stiff than standard springs. This is achieved by a thinner neck on the spring hinge. Set of 2 pieces.
The bushings of the Swing Stop™ reduce the play in the stop, for greater accuracy. The stop defines the distance between the end of the board and the blade, for accuracy and repeatability. When you are not using it, just swivel the stopper away. This stop fits the Kreg Top Trak and the Kreg Heavy-Duty Trak. This versatile stopper makes repetitive sawing easier than ever. It keeps exactly the measurements you set and is easy to push aside when you don't need it.
The production stop is suitable for use with the Kreg Top Trak and the Kreg Heavy-Duty Trak. This gives you the versatility to use the stop with different machines and in different ways. You place the stopper on the top of the track as you wish. This also makes it easy to lift the stopper out of the track and to move it. Thanks to the robust aluminium construction of the Swing stop, the stop remains exactly in the set position. This stopper provides the rigidity and accuracy you need.
La table à vide SFV150 est adaptée pour une fixation solide et rapide du panneau. Grâce aux ventouses, ce support est idéal pour tous les matériaux lisses et non poreux. Pour fixer le support, une pince est fournie en standard. La table est un moyen efficace et convivial de tenir le panneau et de travailler confortablement sur les bords. Pour les pièces de grande taille, il est recommandé d'utiliser plusieurs supports. Le support peut être placé à la fois horizontalement et verticalement. Egalement disponible avec deux ventouses comme SFV50.
La TT900/120CX est une scie à bras radial professionnelle qui combine puissance, précision et polyvalence.
Sacs supplémentaires pour les systèmes d'aspirateur de marque Air Flux. Peut-être utiliser avec le modèle Air Flux Dusty 1020AF.
The BOW FencePRO featherboard features an innovative use of high-density EVA Foam/foam combs and clamping system that increases input control, dramatically improves recoil and better protects your wood from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. The springs are also unbreakable and, unlike plastic springs, they can be replaced if damaged.
Set of two, including assembly hardware.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Grâce au face de coupe supplémentaire en bout de fraise (Z=2+1), c'est aussi possible de facilement faire de perçage.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to use on the Belmash SDR2200
Connector diameter 100mm to connect multiple pieces of Air Flux accessories. To be used with the Air Flux dust extractors. Provided on one side of thread.
Lame de scie avec 28 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
Larger pocket hole screws for larger projects. For the heavier work you can count on the powerful and reliable Kreg Jig® HD! This jig is ideal for lumber 2x4 and larger. With the Kreg Jig® HD you can make joints with material 38 mm and thicker, which are as much as 50% stronger than traditional Kreg Joints™. You can clamp the HD to the workpiece using a Kreg® wood clamp or quick release clamp. Or you can use it in your Kreg® Pocket-Hole Jig K5, K4 or K3 instead of the standard drill guide block.
The CPL 270 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two planing knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 270 is the perfect partner for every carpenter on a construction site.
Schuurband voor schuurmachine TT2600KSM - 2600 x 150 mm
Antistatic hose length 3 meter diameter 100 mm. To be used in combination with the Dust Extractors by Air Flux.
Les dents de cette lame de scie sont aiguisé en forme de V (45°) pour facilement et rapidement faire des rainures dans votre lambris. Sur demande, les dents peut être aussi aiguiser en différents formes/angles ou avec des épaisseurs différents.
Lame de scie pour rainues avec denture widia en forme V pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDM2500.
Set profielmessen hoogte 40mm Nr. 0079 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ce chariot de tenonnage avec capot de tenonnage est disponible en option avec les machines combinées TT320N2CU et TT410N2CU.
Set profielmessen hoogte 50mm Nr. 2019 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Cut twice as long with the Accu-Cut™ Extension Kit. It is easily attached to the Accu-Cut™ to make equally straight, precise and splinter-free cuts of up to 2540 mm in length.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
This extra large protector fits on the PIHER wooden clamps.
It has a length of 6.5 cm and is made of beech wood, covered with cork.
Set profielmessen hoogte 50mm Nr. 2079 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Chariot fix-body avec guide (entrée) pour Timber Yard Champ TT400TX.
Joint isolant en silicone pour fenêtres et portes de couleur blanche. Excellente résistance à des températures comprises entre -60 et 200°C. Avec ce sceau, vous bénéficierez à la fois d'une bonne isolation température et d'une bonne isolation acoustique. Essentiel pour les nouvelles constructions et facile à intégrer dans les constructions existantes. Utilisez la rainureuse Virutex RA17VG avec le mèche ancre double.
Disponible en diamètre 6mm ou 8mm.
Transparante buis met handgreep en afsluitschuif om te gebruiken met de stofafzuigingen van Air Flux. Gebruik de Clean-Up kit om uw atelier proper te houden en stof- of houtresten na het werken op te zuigen.
Practical support with wheels that makes it possible for one person to hold and transport all types of panels, heavy doors, wood, PVC, aluminium, etc. For pieces with a maximum thickness between 6mm and 110mm. Thanks to its robust design, the SPR770T easily supports pieces up to 200kg. The clamp is covered with a protective coating to prevent damage to your pieces. The SPR770T support is very easy to use. Secure your piece by placing it in the clamp and pressing. To unload it again, use the foot pedal.
With the help of the pneumatic wheels, the support can easily be moved, even on uneven ground. This mobile support even manages to overcome a few low steps without any problems. Thanks to the blocking system, you can also use this support for stationary work. In short, the ideal accessory for, for example, installers of doors that have to work on their own.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze boor is verkrijgbaar in twee verschillende lengtes
Ces fraises à rainurer en V vous permettent de réaliser des rainures en V profondes et peu profondes, idéales pour la fabrication d'enseignes ou d'éléments décoratifs sur des panneaux ou des meubles. Utilisez cette fraise sans risque de brûlures. La fraise est également très adaptée à la réalisation de chamfreins. Il est recommandé de passer plusieurs fois lors de l'enlèvement de grandes quantités de matériel.
Wheel kit to mount on various machines of our Semi Pro series. Use this wheel kit to easily move your panel saw, thicknessing machine, toupie or combination machine around the workshop. With detachable lever for easy handling.
OUTLET | Showroom model, without cover plate
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in high quality carbide (widia) with diameter Ø500mm and an induction motor of 3.5 HP. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 180mm. Ergonomic and easy to operate, with automatic return unit. Fully assembled on delivery and ready to use.
Set profielmessen hoogte 50mm Nr. 2007 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set de couteaux profilés hauteur 40mm Nr. 0013 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Le TT70XP8 est un support à rouleau pliable et réglable en hauteur sur roulements à billes avec une double fonction : rouleau et billes.
Template to be used on the Virutex FR129VB Router for door hinges to mill Argenta 140/80. This template is only suitable for the model 140/80 from Argenta. Other models available. Hinge not included.
Make extra large pocket holes twice as strong as standard pocket holes. The Kreg XL Drill Bit has our easy-to-install design with etched material thickness markings on the bit and a stop collar with a viewing window. To be used with the Kreg Pocket-Hole Jig XL for making XL pocket holes in materials from 38 mm to 80 mm thick. Also suitable as a replacement bit for the Kreg Jig HD.
LAATSTE STUKS!
Sterke schraag gemaakt uit stalen profiel van 40x20x1.2mm met een laad capaciteit tot 500kg. Makkelijk opvouwbaar. Deze schraag is verkrijgbaar in twee verschillende hoogtes.
Sanding drum with exchangeable sanding sleeve for mounting on a milling machine with shaft 30mm. Sanding shells with different grit sizes available separately. Standard delivery with a sanding sleeve grit size 100. Other sanding sleeves suitable for this sanding roller with grain 40, 60, 80 or 120.
Sacs supplémentaires (25 pièces) en PVC 120µm à utiliser avec les aspirateurs d'Air Flux. Peut-être utiliser avec les modèles Air Flux suivants:
Air Flux Dusty 3000AF
Air Flux Dusty 6000AF
Air Flux Dusty 3800RDC-AF
Air Flux Dusty 5000-3 AF
Air Flux Dusty 5000-4 AF
Deze verstelbare afschuinfrees met snijvlakken in hoogwaardig hardmetaal, geeft u een enorme flexibiliteit bij het maken van schuine kanten. De frees is aan beide zijden instelbaar tussen 0° en 90° met stappen van 7,5°. Gebruik de frees zowel voor het afschuinen van hout als plaatmateriaal. Dankzij de hardmetalen messen snijdt deze groeffrees moeiteloos door massieve platen, harde en zachte houtsoorten, MDF of gelamineerde platen.
Multifunctionele freeskop geschikt voor bijna elk profielmes dat vandaag op de markt is. De freeskop kan zowel de profielmessen van hoogte 40mm en 50mm als wegwerpmessen en omkeermessen tot 50mm dragen. Dankzij de voorsnijders boven en onderaan is uw freeswerk steeds zuiver afgewerkt. Ook geschikt voor rabat of sponning frezen.
De Verticut TT2141DPM-E is een verticale paneelzaag voor platen van 4100 x 2100 mm.
Schuurhuls 20 x 90 mm voor contourschuurmachine TT140
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Showroommodel
230VWITH FREE ACCESSORIES:+ SPINDLE FOR ROUTERS 8, 10 & 12 MM+ ADDITIONAL SPINDLE 20 MM+ MOBILE BASE+ MITRE GUIDE
The Itamac Eagle series are high-quality spindle moulding machines, specifically developed for professional routing applications. Designed with both functionality and comfort in mind, this machine has every possible function for a spindle moulder in this class. Equipped with an extra-heavy chassis, a solid cast-iron protective cover with aluminium guides and fine adjustment. The powerful 230V or 400V motor delivers 3HP and ensures that this table can handle almost any routing task. The Itamac Eagle HW300E has a 30 mm shaft. With the optionally available shaft and collets, the machine can also be used for profiling with the aid of router bits. The large cast iron table guarantees the necessary stability during work. Can be used at four speeds, with centralised control panel above the machine.
This model is equipped with a high-quality 1400 mm sliding system with flip-stop.
Set profielmessen hoogte 90mm Nr. 5325 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The BOW FeatherPRO featherboard features an innovative use of high-density EVA Foam / foam combs and clamping system that increase control of insertion, dramatically improve recoil and protects your wood better from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. Ideal for table saws, routers, guides
Set profielmessen hoogte 40mm Nr. 0056 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Spantanghouder met schacht M14 om op de as van uw freesmachine te plaatsen. Te gebruiken met spantang T117 om bovenfrezen met schacht diameter 8mm, 10mm of 12mm te monteren.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. At the top there is a second roller (width 92mm) for stationary glueing along the top with the machine.
Attention: this hand gluer comes standard with a rubber roller, suitable for vinyl (white) adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available without roller at the top (models EM26D and EM126T).
Set profielmessen hoogte 40mm Nr. 0065 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Antistatische afzuigslang lengte 6 meter diameter 100 mm. Te gebruiken in combinatie met de stofafzuigingen van Air Flux.
Set profielmessen hoogte 50mm Nr. 2053 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
Roller for placing and pressing the silicone seals type FS1 - FS2 - FS3 and FS4. These seals can be installed using the Virutex RA17VG slotting machine.
Set profielmessen hoogte 40mm Nr. 0029 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Content
Guide d'onglet de la classe supérieure. Flip-stop à réglage fin, angles standard fraisés, extension de la butée extensible
Si vous cherchez des accessoires pour votre table de sciage ou votre table à toupie dans la catégorie "sans compromis", vous venez de trouver !
L'ITAMAC Xact 36 appartient définitivement à la "classe non-plus-ultra" en termes de réglage, de précision, de stabilité et de finition. Un guide d'onglet absolument inégalé !
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Set profielmessen hoogte 40mm Nr. 0088 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. Simply press the trigger to run the glue over the roll. Using this trigger you will always obtain the right amount of glue for your project. Thanks to the support, the hand gluer can easily be put away. For cleaning, you can keep this adhesive under water without risk of damage.
Attention: this adhesive comes standard with a rubber roller, suitable for vinyl adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T).
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Set profielmessen hoogte 40mm Nr. 0094 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lengte van deze boor is 150mm
Langgatboren met spaanbrekers, zowel links- als rechtsdraaiend verkrijgbaar. Deze boren zijn uiterst geschikt voor het boren van diepe gaten of sleuven in de meeste houtsoorten. Voorzien van twee snijvlakken in 18% HSS hoogwaardig staal en spaanbrekers.
Tuyau anti-statique longueur 15 mètre diamètre 100 mm A utiliser en combinaison avec les extracteurs de poussière Air Flux.
Stofhoed in zwart PVC met diameter buis 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. De grootte van de opening bedraagt 340x180mm.
Levage facile et sûr des panneaux de porte, meubles, ... Cet ascenseur de porte a une capacité de charge allant jusqu'à 200 kg. Équipé d'une base pivotante et d'une surface antidérapante. Fabriqué en aluminium. Hauteur maximale de levage 75cm.
Set profielmessen hoogte 40mm Nr. 0012 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
La TT2010 est une ponceuse compacte et polyvalente. Elle dispose d'une bande à poncer de 2010 x 153 mm, une table de contour pour le ponçage circulaire et une buse d'aspiration. La bande peut être placée aussi bien horizontalement que verticalement. Les tables de travail en aluminium peuvent toutes deux être inclinées jusqu'à 45°. Son rapport qualité-prix imbattable en fait la solution idéale pour les artisans. La bande graphitée sur la table de ponçage améliore le glissement de la bande à poncer.
Il est livré par défaut avec un écran pour le ponçage horizontal, une butée d'onglet et un système de serrage rapide qui permet de changer rapidement la bande à poncer. Une base est également fournie par défaut.
La bande à poncer est disponible en grain 60, 80, 100 en 150.
With this set of two protective pads you can make your Piher Max Quick 300 clamp like new again.
You just click the pads on the clamp when the original pads have become too damaged.
Set profielmessen hoogte 50mm Nr. 2017 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0067 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw blade with 52 teeth
Saw blade with alternate top bevel teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Can also be used for sawing chipboard or single-sided laminated wood. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
Beweegbare bek voor klem Maxipress F
Cette table à vide électrique sur pied basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. Pour que la table soit à vide, elle doit être connectée au système de fixation électrique à vide SVE600 de Virutex (inclus en standard). La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. Le support doit être fixé à l'aide de pinces (non comprises). Ce support est spécialement conçu pour se connecter au modèle SVE660 ou SVE670. Pas de connexion directe au système de fixation électrique de vide SVE600 comme le modèle SVE660 ou SVE670.
Set profielmessen hoogte 40mm Nr. 0021 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ce mandrin à stylos cylindrique a été spécialement développé pour la production de stylos en bois. Cela implique souvent de tourner de petites pièces, qui doivent également être serrées très précisément.
Set profielmessen hoogte 50mm Nr. 2071 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The Itamac WL-508DC is a very stable, with vario-inverter speed control, left and right turning wood lathe with a turning diameter of 320 mm and 508 mm between the points. The speed can be regulated steplessly in 3 ranges between 250 and 3850 rpm. (250-750 / 550-1650 / 1300-3850 rpm). The vario-inverter can maintain a constant torque at any speed, so even at low rpm it still delivers very powerful torque. The motor is a low-noise DC motor of 1000 Watts. With this compact wood lathe, attention has been paid to turning as quietly and vibration-free as possible. Very user-friendly operation with a rotary knob for stepless speed control and digital display of speed and direction of rotation.
The three-stage wide polybelt pulleys can be changed very quickly and easily, and thus the speed range can be adjusted easily and quickly.This lathe has a wide and solid bed and therefore also maximum stability during turning! The 200 mm wide support slides easily up and down the bed and has a nice 45° bevelled edge.
Plug cutters to be used on all wood types. These straight wood plug cutters are used to make plugs to be inserted after having drilled with "Forstner" bits. Use the plugs after installing sunken screws and sand the top of the plug flush with the wood surface to create nearly invisible screw connections on your wood projects. This cutter has a lenght of 140mm and 4 SP cutting teeth.
Faites-en plus avec votre gabarit pour trous de poche 320 en ajoutant plus d'options pour l'espacement des trous. Ce kit comprend deux entretoises pour gabarits de perçage qui s'insèrent entre les guides de perçage, de sorte que vous pouvez facilement augmenter la distance entre les trous par incréments de 19 mm, en fonction de ce dont vous avez besoin pour votre projet. Placez les entretoises à côté des guides de perçage ou à côté d'une autre entretoise et serrez-les simplement.
Grooving saw blade with flat (FZ) tungsten teeth to be used for cutting grooves in hardwood, softwood, timber wood, and plastic coated panel. The sawing blades have a bore of 30mm and are ideally suited for use on all spindle moulding machines or sawing tables.
Saw blade available in different diameters
Ce guide de rotation 900 mm avec presseur est disponible en option pour les machines combinées TT320N2CU et TT410N2CU.
Jeu de six bagues de remplissage en haute qualité avec un tolérance de 0,01. Les épaisseurs varient entre 0,1 mm et 1 mm avec des graduation de 0,1. Ces bagues sont disponibles avec un alésage de 30 mm (Ø45 mm) ou de 50 mm (Ø70 mm).
Met de Precisie Stock Guides hoef je niet te worstelen om platen of balken vast te houden tijdens het doorduwen op de zaag - en freestafel. De rollers trekken je werkstuk strak op zijn plaats tegen de geleider en je werktafel. Je zult veiliger, gemakkelijker en preciezer zagen terwijl je werkstuk altijd op z'n plek blijft.
Niets kan je meer veiligheid en precisie bieden terwijl je je werkstuk vasthoudt. Je voorkomt hiermee terugslag. En dit zonder beperkingen!
De unieke geleiderollers op de Stock Guide staan onder een hoek van 5 graden, waardoor je werkstuk effectief en constant tegen de geleider gedrukt wordt. Om terugslag te voorkomen is elke roller voorzien van een kogellager die maar 1 kant op kan draaien.
Je werkstuk wordt strak tegen de geleider en de werktafel geduwd en door de grip van de polyurethaan rollers wordt het veilig in positie gehouden.
De Precisie Stock Guideskan bevestigd worden aan een standaard T-Track die gebruikt worden voor de meeste commerciële freestafels. Ook werken ze net zo goed op een werkbank of boortafel met een 1/4" T-Track op de geleider.
De Precisie Stock Guides zijn met een CNC frees gemaakt van stevig aluminium en geanodiseerd voor het uiterlijk en duurzaamheid. De assen van de wielen zijn gemaakt van koudgewalst staal en gehard voor duurzaamheid. De knoppen voor het verstellen zijn gemaakt van roestvrij staal om lang mee te kunnen gaan. De wielen zijn wederom gemaakt van slijtvast acetol kunststof, waardoor het ook een lage wrijvingsweerstand heeft. De antislipbanden zijn gegoten uit polyurethaan voor een lange levensduur en superieure grip op je werkstuk.
De ITAMAC Precisie Stock Guides kan je gemakkelijk en snel installeren. Langs het profiel kan je ze in elke gewenste positie met een draai aan de twee knoppen vastmaken. De hoogte kan je bepalen met behulp van de klemknop. Wanneer je ze niet gebruikt, draai je ze eenvoudig aan de kant.
Idéal pour la menuiserie en dehors de l'atelier. Facile à placer sur n'importe quelle table sans laisser de traces. Donne plus de sécurité et de précision dans votre travail. La conception avancée vous permet de positionner les pièces de différentes manières, tout en les tenant toujours bien en place. Sa robustesse exceptionnelle vous permet de serrer des pièces métalliques et d'effectuer des travaux de précision. Sterk, aluminium ontwerp met kaken in hars waardoor u schade aan het werkstuk vermijdt.
Professional, powerful Virutex chamfering planer with a base plate with a V-profile of 90°. This is why the CE89E is perfectly suited for chamfering work on all your projects. Thanks to its high power, this planer can make a chamfer of up to 25mm width in a single passage. As standard, the unit is equipped with a set of reversible blades in high-quality carbide (widia). After replacement, the blades do not need to be re-adjusted. The shavings are ejected through the exhaust on the right side.
Standard delivery in a handy PVC case with connector for dust extraction. Optionally available with a base for stationary use of the CE89E.
Broche à démontage rapide pour les perceuses multibroches Line Driller TT21EBM1 et TT23EBM2.
Cutter head in light metal with reversible blades in high quality carbide (HW) to create beautiful profiles on your furniture or door panels. The maximum length of this panel raising profile is 54mm. The cutter head comes in a sturdy plastic case, with key to easily replace the knives. To get even more out of your cutter head, a total of six profile knives are available. Profile knife A is mounted on the cutter head as standard. The other knives, type B, C, D and E are available separately. Thanks to the tungsten carbide blades, this profile cutter cuts effortlessly through solid boards or solid wood. Also suitable for use on MDF.
Available with bore 30mm or 50mm.
Les scies stationnaires sont toujours équipées d'une grande sortie de poussière, par ex. Ø 100 mm, une taille très courante. Les extracteurs de poussières pour machines stationnaires sont également gros de ce diamètre de 100 mm et au fur et à mesure que la puissance de l'extracteur augmente, on passe à 2 x 100mm, 3 x 100mm ou même plus. Ce diamètre de 100 mm doit donc toujours être maintenu de l'aspirateur à la scie. Cela permet de maintenir la vitesse de l'air, qui se transforme en une aspiration suffisante.
Une machine à scie stationnaire dispose d'une sortie de poussière de 100 mm sur le corps de la machine mais le long du haut de la table de scie, le problème se pose généralement à chaque utilisateur pour une extraction efficace. En général, ces tables de sciage sont dotées d'un drain ou d'une protection sur le coin de fendage d'un diamètre de 40 mm seulement. Ce fin tuyau de vidange en haut va ensuite se brancher sur un réducteur de 100 mm à 40 mm. C'est ce changement de diamètre qui pose problème : en effet, la vitesse de l'air est immédiatement ralentie et la puissance d'aspiration ne peut donc jamais être utilisée de manière optimale.
L'extracteur flottant ORCA S17 peut être utilisé vers tous les types de tables de sciage ou de scies à panneaux et possède une aspiration directe du diamètre 100mm jusqu'au-dessus de la lame de scie. La vitesse de l'air est optimale sans ralentissement du flux d'air. Grâce à une extraction efficace de la poussière, ce capuchon assure un air pur dans votre atelier et aide à éliminer la poussière qui s'accumule sur la pièce à travailler. En outre, le grand couvercle transparent de l'égouttoir permet de voir clairement votre pièce.
Et comme le mot lui-même le dit "extracteur flottant" : vous pouvez scier directement à n'importe quelle hauteur sans être gêné par la protection classique montée sur le coin de fendage. Cela signifie que vous pouvez réaliser des coupes peu profondes (rainures), des coupes à onglet et, en fait, n'importe quel type de coupe que vous feriez normalement. Vous pourriez même utiliser un chariot ou un moule fait maison avec cette hotte.
Peut être utilisé sur presque tous les types de scies à table : Le bras supérieur en acier robuste s'écarte et revient en douceur en position de travail. Le couvercle de protection transparent est facile à soulever pour un accès rapide à la lame de scie. Le bras supérieur est réglable de manière télescopique de +/-880 mm à un maximum de +/- 1700 mm.
Durabilité robuste - Le dépoussiéreur flottant est fabriqué en aluminium robuste revêtu de poudre. Les pieds de support se raccordent sous la table d'extension et assurent la rigidité du grand tube à poussière et de la protection de la lame de scie.
Anneau de réduction pour réduire l'alésage de lames de scie en fonction de votre machine. Rendez chaque lame de scie compatible avec votre propre table de sciage grâce à cet bague de réduction très pratique.
Réduction d'alésage 30mm à 16mm.
L'unité de rabotage est un outil indispensable pour le rabotage d'épaisseur sur le Belmash SDM2500 et permet d'obtenir une pièce d'excellente qualité. Il possède son propre bloc de coupe qui est entraîné par le moteur du SDM2500. Avec cet appareil, vous pouvez prévoir une épaisseur sur le SDM2500 de 5 à 103 mm et une largeur de rabotage de 250 mm.
Table de travail compacte, réglable en hauteur entre 720 mm et 1150 mm. Très facile à ranger grâce au plan de travail pliable (584x508mm). Capacité de charge maximale de 80 kg.
The ADAMIK VC-5 vacuum pad is a double-sided suction pad that attaches to the workbench with a push. Thanks to this technology, it is easy to change the dimensions of the machined surface. The VC-5 suction cup is designed to clamp non-porous workpieces during banding, milling, cutting, grinding, drilling,
The big advantage of the VC-5 suction cup is the method of creating a vacuum using the Venturi system, which compresses the workpiece by compressed air from a conventional compressor.
The suction cup can be used both horizontally and vertically.
Saw blade with 24 teeth
Saw blade with flat, beveled (FZ/FA) teeth and anti-kickback design for cutting slab woods and boards, timber with parts of concrete and metal (nails, metal fittings), porous concrete blocks. For use on table saws.
Capot transparant avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La taille de l'ouverture du capot anti-poussière est de 200x200mm. Avec couverture.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
The Ultralight spring foams are suitable for the FeatherPRO and FeatherDUO featherboards. Ultralight springs are less stiff than standard springs. This is achieved by a thinner neck on the spring hinge. Set of 2 pieces.
The bushings of the Swing Stop™ reduce the play in the stop, for greater accuracy. The stop defines the distance between the end of the board and the blade, for accuracy and repeatability. When you are not using it, just swivel the stopper away. This stop fits the Kreg Top Trak and the Kreg Heavy-Duty Trak. This versatile stopper makes repetitive sawing easier than ever. It keeps exactly the measurements you set and is easy to push aside when you don't need it.
The production stop is suitable for use with the Kreg Top Trak and the Kreg Heavy-Duty Trak. The production stop is suitable for use with the Kreg Top Trak and the Kreg Heavy-Duty Trak. You place the stopper on the top of the track as you wish. This also makes it easy to lift the stopper out of the track and to move it. Thanks to the robust aluminium construction of the Swing stop, the stop remains exactly in the set position. This stopper provides the rigidity and accuracy you need.
La table à vide SFV150 est adaptée pour une fixation solide et rapide du panneau. Grâce aux ventouses, ce support est idéal pour tous les matériaux lisses et non poreux. Pour fixer le support, une pince est fournie en standard. La table est un moyen efficace et convivial de tenir le panneau et de travailler confortablement sur les bords. Pour les pièces de grande taille, il est recommandé d'utiliser plusieurs supports. Le support peut être placé à la fois horizontalement et verticalement. Egalement disponible avec deux ventouses comme SFV50.
Cette scie à bras radial professionnelle allie puissance, précision et polyvalence.
Elle est équipée d'un interrupteur de sécurité et d'un chemin de roulement à 8 roulements à billes.
La scie est réglable de manière pratique pour les coupes transversales, les coupes d'onglet, les chanfreins et les doubles coupes d'onglet.
Le moteur à induction (230 V et 400 V) silencieux et sans entretien, est freiné.
Exécution très robuste et professionnelle de la colonne. Le système de guidage sur toute la longueur du bras (8 roulements à billes) assure une précision extrêmement élevée et une longue durée de vie. Le bloc moteur assure le retour automatique de la scie.
La machine est dotée d'un châssis très solide et stable avec une table durable. Un capot de scie fermé est fourni en série pour la sécurité, et le pointeur laser garantit que vous pouvez travailler clairement. Elle dispose de commandes faciles à utiliser et de graduations claires pour le réglage de la largeur, la profondeur et l'angle de coupe.
Sacs supplémentaires pour les systèmes d'aspirateur de marque Air Flux. Peut-être utiliser avec le modèle Air Flux Dusty 1020AF.
The BOW FencePRO featherboard features an innovative use of high-density EVA Foam/foam combs and clamping system that increases input control, dramatically improves recoil and better protects your wood from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. The springs are also unbreakable and, unlike plastic springs, they can be replaced if damaged.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Grâce au face de coupe supplémentaire en bout de fraise (Z=2+1), c'est aussi possible de facilement faire de perçage. Le fraise est réalisé complètement en métal dure (carbide) et a une finition spéciale 'micrograin' pour des prestations améliorés. Grâce à tous ces qualités, le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDR2200.
Connector diameter 100mm to connect multiple pieces of Air Flux accessories. To be used with the Air Flux dust extractors. Provided on one side of thread.
Lame de scie avec 28 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
Larger pocket hole screws for larger projects. For the heavier work you can count on the powerful and reliable Kreg Jig® HD! This jig is ideal for lumber 2x4 and larger. With the Kreg Jig® HD you can make joints with material 38 mm and thicker, which are as much as 50% stronger than traditional Kreg Joints™. You can clamp the HD to the workpiece using a Kreg® wood clamp or quick release clamp. Or you can use it in your Kreg® Pocket-Hole Jig K5, K4 or K3 instead of the standard drill guide block.
The CPL 270 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two planing knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 270 is the perfect partner for every carpenter on a construction site.
Schuurband voor schuurmachine TT2600KSM.
2600 x 150 mm
Verkrijgbaar in korrel 60 - 80 - 100 - 150
Antistatic hose length 3 meter diameter 100 mm. To be used in combination with the Dust Extractors by Air Flux.
Les dents de cette lame de scie sont aiguisé en forme de V (45°) pour facilement et rapidement faire des rainures dans votre lambris. Sur demande, les dents peut être aussi aiguiser en différents formes/angles ou avec des épaisseurs différents.
Lame de scie pour rainues avec denture widia en forme V pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDM2500.
Set profielmessen hoogte 40mm Nr. 0079 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ce chariot de tenonnage avec capot de tenonnage est disponible en option avec les machines combinées TT320N2CU et TT410N2CU.
Set profielmessen hoogte 50mm Nr. 2019 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Cut twice as long with the Accu-Cut™ Extension Kit. It is easily attached to the Accu-Cut™ to make equally straight, precise and splinter-free cuts of up to 2540 mm in length.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
This extra large protector fits on the PIHER wooden clamps.
It has a length of 6.5 cm and is made of beech wood, covered with cork.
Set profielmessen hoogte 50mm Nr. 2079 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Chariot fix-body avec guide (entrée) pour Timber Yard Champ TT400TX.
Joint isolant en silicone pour fenêtres et portes de couleur blanche. Excellente résistance à des températures comprises entre -60 et 200°C. Avec ce sceau, vous bénéficierez à la fois d'une bonne isolation température et d'une bonne isolation acoustique. Essentiel pour les nouvelles constructions et facile à intégrer dans les constructions existantes. Utilisez la rainureuse Virutex RA17VG avec le mèche ancre double.
Disponible en diamètre 6mm ou 8mm.
Transparante buis met handgreep en afsluitschuif om te gebruiken met de stofafzuigingen van Air Flux. Gebruik de Clean-Up kit om uw atelier proper te houden en stof- of houtresten na het werken op te zuigen.
Practical support with wheels that makes it possible for one person to hold and transport all types of panels, heavy doors, wood, PVC, aluminium, etc. For pieces with a maximum thickness between 6mm and 110mm. Thanks to its robust design, the SPR770T easily supports pieces up to 200kg. The clamp is covered with a protective coating to prevent damage to your pieces. The SPR770T support is very easy to use. Secure your piece by placing it in the clamp and pressing. To unload it again, use the foot pedal.
With the help of the pneumatic wheels, the support can easily be moved, even on uneven ground. This mobile support even manages to overcome a few low steps without any problems. Thanks to the blocking system, you can also use this support for stationary work. In short, the ideal accessory for, for example, installers of doors that have to work on their own.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze boor is verkrijgbaar in twee verschillende lengtes
Ces fraises à rainurer en V vous permettent de réaliser des rainures en V profondes et peu profondes, idéales pour la fabrication d'enseignes ou d'éléments décoratifs sur des panneaux ou des meubles. Utilisez cette fraise sans risque de brûlures. La fraise est également très adaptée à la réalisation de chamfreins. Il est recommandé de passer plusieurs fois lors de l'enlèvement de grandes quantités de matériel.
Wheel kit to mount on various machines of our Semi Pro series. Use this wheel kit to easily move your panel saw, thicknessing machine, toupie or combination machine around the workshop. With detachable lever for easy handling.
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. Includes zero voltage protection on the switch for improved safety in the event of voltage loss. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in high quality carbide (widia) with diameter Ø500mm. The direct-drive induction motor delivers 3.5 HP. Use at least power cable with thickness 2.5m² to avoid damaging the motor. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 180mm.
The tilting saw is equipped with an automatic return unit using a spring. The saw blade is effortless to operate and cuts quickly through the wood. Saw large quantities of wood in one go without any problems and ergonomically. Using the extendable support and size indication, you can cut even longer pieces to the same size. Equipped with a sturdy base with two wheels and a pull rod which makes it easy to move the machine. Easy to move, both indoors and outdoors and on uneven surfaces. Fully assembled on delivery and ready to use.
Set profielmessen hoogte 50mm Nr. 2007 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set de couteaux profilés hauteur 40mm Nr. 0013 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Le TT70XP8 est un support à rouleau pliable et réglable en hauteur sur roulements à billes
Les pieds peuvent être repliés à plat, permettant un rangement rapide et pratique.
Le support du TT70XP8 a une double fonction : rouleau et billes.
Template to be used on the Virutex FR129VB Router for door hinges to mill Argenta 140/80. This template is only suitable for the model 140/80 from Argenta. Other models available. Hinge not included.
Make extra large pocket holes that are twice as strong as standard pocket holes. The Kreg XL Drill Bit has a design with etched material thickness markings on the bit and a stop collar with a viewing window. To be used with the Kreg Pocket-Hole Jig XL for making XL pocket holes in materials with a thickness of 38 mm to 80 mm. The drill bit is also suitable as a replacement bit for the Kreg Jig HD.
Sterke schraag gemaakt uit stalen profiel van 40x20x1.2mm met een laad capaciteit tot 500kg. Makkelijk opvouwbaar. Deze schraag is verkrijgbaar in twee verschillende hoogtes.
Sanding drum with exchangeable sanding sleeve for mounting on a milling machine with shaft 30mm. Sanding shells with different grit sizes available separately. Standard delivery with a sanding sleeve grit size 100. Other sanding sleeves suitable for this sanding roller with grain 40, 60, 80 or 120.
Sacs supplémentaires (25 pièces) en PVC 120µm à utiliser avec les aspirateurs d'Air Flux. Peut-être utiliser avec les modèles Air Flux suivants:
Air Flux Dusty 3000AF
Air Flux Dusty 6000AF
Air Flux Dusty 3800RDC-AF
Air Flux Dusty 5000-3 AF
Air Flux Dusty 5000-4 AF
Deze verstelbare afschuinfrees met snijvlakken in hoogwaardig hardmetaal, geeft u een enorme flexibiliteit bij het maken van schuine kanten. De frees is aan beide zijden instelbaar tussen 0° en 90° met stappen van 7,5°. Gebruik de frees zowel voor het afschuinen van hout als plaatmateriaal. Dankzij de hardmetalen messen snijdt deze groeffrees moeiteloos door massieve platen, harde en zachte houtsoorten, MDF of gelamineerde platen.
Multifunctionele freeskop geschikt voor bijna elk profielmes dat vandaag op de markt is. De freeskop kan zowel de profielmessen van hoogte 40mm en 50mm als vervangbare messen en omkeermessen tot 50mm dragen. Dankzij de voorsnijders boven en onderaan is uw freeswerk steeds zuiver afgewerkt. Ook geschikt voor rabat of sponning frezen.
De Verticut TT2141DPM-E is een plaatsbesparende verticale paneelzaag voor platen van 4100 x 2100 mm.
De professionele verzwaarde draagarm kan horizontaal verplaatst worden en de zaag op de draagarm is verticaal verstelbaar.
Ze heeft een volledig gelast kader met precisiegeharde looppunten onderaan en bovenaan. De zware draagarm/mast loopt zeer soepel door de slijtvaste staafgeleiding met dubbele kogellagers. Voor het verwerken van kleine platen is een hoogtehulp voorzien, waardoor u tijd bespaart en uw rug niet onnodig belast. De machine is uitgerust met een hoofdzaag en een voorritsinrichting met inductiemotor, die het breken van laminaat en de toplaag tijdens het zagen voorkomt.
Daarnaast is de machine voorzien van makkelijk instelbare flipstops en een slang voor afzuiging. Ze is optioneel verkrijgbaar met een inductiemotor van 5,5 kW en een digitale display.
Ze wordt vervoerd in een speciale vrachtwagen met vloer die zo goed als volledig verlaagd kan worden.
Wat onderscheidt de TT2141DPM-E van de TT2141DPM?
Waar de rode horizontale plaatsteunen bij de TT2141DPM manueel versteld moeten worden, gebeurt deze aanpassing hier automatisch: de steunen worden naar boven of beneden verplaatst wanneer u de zaag positioneert, om te voorkomen dat u ze bij het horizontaal zagen zou inzagen. Verder is de steun onderaan waarop de plaat rust, uitgerust met slijtvaste stalen rollers op kogellagers in plaats van kunststof glijzolen. Dit zorgt ervoor dat de panelen nog soepeler glijden.
Schuurhuls 20 x 90 mm voor contourschuurmachine TT140
Verkrijgbaar in korrel 80 - 100 - 120
Verkocht per 3 stuks
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
The Itamac Eagle series are high-quality spindle moulding machines, specifically developed for professional routing applications. Designed with both functionality and comfort in mind, this machine has every possible function for a spindle moulder in this class. Equipped with an extra-heavy chassis, a solid cast-iron protective cover with aluminium guides and fine adjustment. The powerful 230V or 400V motor delivers 3HP and ensures that this table can handle almost any routing task. The Itamac Eagle HW300E has a 30 mm shaft. With the optionally available shaft and collets, the machine can also be used for profiling with the aid of router bits. The large cast iron table guarantees the necessary stability during work. Can be used at four speeds, with centralised control panel above the machine.
This model is equipped with a high-quality 1400 mm sliding system with flip-stop.
Set profielmessen hoogte 90mm Nr. 5325 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The BOW FeatherPRO featherboard features an innovative use of high-density EVA Foam / foam combs and clamping system that increase control of insertion, dramatically improve recoil and protects your wood better from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. Ideal for table saws, routers, guides
Set profielmessen hoogte 40mm Nr. 0056 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Spantanghouder met schacht M14 om op de as van uw freesmachine te plaatsen. Te gebruiken met spantang T117 om bovenfrezen met schacht diameter 8mm, 10mm of 12mm te monteren.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM25D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM125T has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. Simply press the trigger to run the glue over the roll. Using this trigger you will always obtain the right amount of glue for your project. Thanks to the support, the hand gluer can easily be put away. For cleaning, you can keep this adhesive under water without risk of damage. At the top there is a second roller (width 92mm) for stationary glueing along the top with the machine.
Attention: this adhesive comes standard with a rubber roller, suitable for vinyl adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available without roller at the top (models EM26D and EM126T).
Set profielmessen hoogte 40mm Nr. 0065 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Antistatische afzuigslang lengte 6 meter diameter 100 mm. Te gebruiken in combinatie met de stofafzuigingen van Air Flux.
Set profielmessen hoogte 50mm Nr. 2053 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
Roller for placing and pressing the silicone seals type FS1 - FS2 - FS3 and FS4. These seals can be installed using the Virutex RA17VG slotting machine.
Set profielmessen hoogte 40mm Nr. 0029 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Weight
4 kg
0,05 kg
0,05 kg
2 kg
0,05 kg
0,05 kg
0,05 kg
1 kg
0,5 kg
1,1 kg
0,05 kg
86 kg
0,05 kg
0,05 kg
0,05 kg
1 kg
0,93 kg
1 kg
0,05 kg
ND
0,05 kg
53 kg
0,05 kg
2 kg
1 kg
25 kg
0,05 kg
5 kg
3 kg
3,3 kg
0,05 kg
1 kg
32 kg
0,05 kg
16,5 kg
5 kg
0,325 kg
1 kg
1 kg
0,05 kg
0,5 kg
0,5 kg
1 kg
250 kg
0,5 kg
0,5 kg
0,05 kg
3,3 kg
0,5 kg
1 kg
1 kg
17 kg
0,05 kg
1 kg
1 kg
3 kg
0,05 kg
10 kg
0,05 kg
2 kg
0,05 kg
0,05 kg
0,02 kg
0,05 kg
10 kg
2 kg
1 kg
8 kg
0,05 kg
0,05 kg
2 kg
130 kg
0,05 kg
0,05 kg
7 kg
0,1 kg
0,2 kg
ND
0,5 kg
0,5 kg
1 kg
1 kg
690 kg
0,05 kg
0,05 kg
250 kg
0,05 kg
1 kg
0,05 kg
0,5 kg
2 kg
0,05 kg
1 kg
0,05 kg
0,05 kg
0,1 kg
0,05 kg
Dimensions
50 cm
ND
0,4 cm
ND
ND
0,4 cm
ND
1500 cm
34 × 18 cm
ND
0,4 cm
1150 × 600 × 1100 cm
ND
0,5 cm
0,4 cm
ND
ND
ND
0,4 cm
ND
0,5 cm
1020 × 305 × 470 cm
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
16 × 20 × 2,2 cm
ND
20 × 20 cm
ND
ND
ND
ND
1150 × 1150 × 800 cm
ND
ND
ND
30 × 26 × 7 cm
ND
ND
ND
ND
ND
ND
ND
30 × 26 × 7 cm
0,4 cm
ND
0,5 cm
67 cm
ND
ND
6,5 × 2,5 cm
0,5 cm
ND
ND
ND
ND
ND
ND
ND
105 × 85 × 110 cm
0,5 cm
0,4 cm
630 × 180 × 140 cm
ND
20 × 1,27 cm
ND
ND
1070 × 790 cm
ND
ND
2950 × 5500 × 1200 cm
ND
ND
ND
0,9 cm
ND
0,4 cm
ND
ND
0,4 cm
600 cm
0,5 cm
ND
ND
0,4 cm
Additional information
Poids
4 kg
Dimensions
50 cm
Zone d'angle
+/- 60°
Coupes d'onglet fixes
-60°, -45°, -22,5°, 0°, 22,5°, 45°, 60°
Profil du guide
460 x 19 x 9 mm
Précision du réglage
0,02 mm
Poids
0,05 kg
Diamètre
48mm
Longueur
90mm
Queue
10x60mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
2 kg
Breedte lijmrol
122mm, 180mm
Inhoud lijmbak
1kg, 1,4kg
Poids
0,05 kg
Diamètre
60mm
Longueur
90mm
Queue
10x60mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Diamètre
15mm
Longueur
150mm
Queue
16x50mm
Sens de rotation
A gauche, A droite
Poids
1 kg
Dimensions
1500 cm
Diamètre
100mm
Poids
0,5 kg
Dimensions
34 × 18 cm
Diamètre
100mm
Poids
1,1 kg
Supporte
100kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
86 kg
Dimensions
1150 × 600 × 1100 cm
Inclinaison
45°
Grain
K60, K80, K100, 150
Table de travail
514 x 221 mm, 790 x 221 mm
Bande à poncer
2010 x 152 mm
Moteur
2 PK
Voltage
230 V
Poids
0,05 kg
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1 kg
Diamètre lame de scie
550mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
4,2mm
nombre de dents
52
Poids
0,93 kg
Poids
1 kg
Puissance
95W
Dimensions de la surface de travail
150x150mm
Pression de vide
750mbar
Poids
0,05 kg
Dimensions
0,4 cm
Cône Morse
1
Poids
0,05 kg
Dimensions
0,5 cm
Poids
53 kg
Dimensions
1020 × 305 × 470 cm
Entrepointes
508 mm
Voltage
230 V
Filetage
M33
Cône de poupée mobile
MT 2
Diamètre de tournage en guidage
320 mm
Verplaatsing as van losse kop
63 mm
RPM Min-Max
250 – 3850
Tête rotative
Non
Poids
0,05 kg
Diamètre
15mm
Longueur
140mm
Queue
13x50mm
nombre de dents
4
Poids
2 kg
Poids
1 kg
Diamètre lame de scie
125mm, 150mm, 180mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
10,0
Epaisseur lame de scie
6,0mm
nombre de dents
12, 18, 24
Poids
25 kg
Longueur
900 mm
Poids
0,05 kg
Diamètre de l\' arbre
30 mm, 50 mm
Diamètre
45mm, 70mm
Poids
5 kg
Poids
3 kg
Poids
3,3 kg
Puissance
700W
Profondeur de rabotage
0-12,5mm
Largeur de rabotage
80mm
Nominale snelheid
16500rpm
Poids
0,05 kg
Poids
1 kg
Diamètre
180mm
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
2
Hauteur de rainure
23mm
Longeur de coupe
54mm
RPM Min-Max
4000-6500
Poids
32 kg
Bras télescopique
réglable entre 90 cm et 175 cm
Extraction du diamètre
100 mm
Hauteur au-dessus du table de travail
34,5 cm
Poids
0,05 kg
Diamètre
30mm
Diamètre de l\' arbre
16mm
Poids
16,5 kg
Capacité d\'épaisseur
5-103mm
Nombre de couteaux
2
Largeur de rabotage
250 mm
Poids
5 kg
Poids
0,325 kg
Dimensions
16 × 20 × 2,2 cm
Afmetingen werkvlak
150x150mm
Force de fixation
800gr/cm² à 6 bar
Werkdruk
5,5-7 bar
Luchtverbruik bij 5,5 bar
28l/min
Poids
1 kg
Diamètre lame de scie
350mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,2mm
Epaisseur lame de scie
2,2mm
nombre de dents
24
Orifices de traction
PH01
Poids
1 kg
Dimensions
20 × 20 cm
Diamètre
100mm
Poids
0,05 kg
Diamètre
38mm
Longeur de coupe
19mm
Longueur
57mm
Rayon
R12,7
Queue
8mm
Faces de coupe
2
Poids
0,5 kg
Poids
0,5 kg
Poids
1 kg
Poids
250 kg
Dimensions
1150 × 1150 × 800 cm
Voltage
230 V, 400 V
Diamètre lame de scie
400mm
Profondeur de coupe 45°
80mm
Profondeur de coupe 90 °
120 mm
Alésage
30 mm
Passage latérale
1100 mm
Poids
0,5 kg
Poids
0,5 kg
Poids
0,05 kg
Diamètre
8mm
Longeur de coupe
19mm, 25mm
Longueur
51mm, 57mm
Faces de coupe
2+1
Poids
3,3 kg
Dimensions
30 × 26 × 7 cm
Max. hoogte werkstuk
63mm
Max. breedte werkstuk
270mm
Poids
0,5 kg
Diamètre
100mm
Poids
1 kg
Diamètre lame de scie
400mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,5mm
nombre de dents
28
Poids
1 kg
Poids
17 kg
Puissance
1500W
Voltage
230 V
Largeur de rabotage
270 mm
Schaafdiepte
0-3 mm
Vitesse raboteuse
12.400
Longueur
490mm
Poids
0,05 kg
Grain
K60, K80, K100, 150
Poids
1 kg
Diamètre
100mm
Poids
1 kg
Diamètre lame de scie
150mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
6,0mm
Epaisseur lame de scie
4,0mm
nombre de dents
18
Forme de dent
Denture V
Poids
3 kg
Dimensions
30 × 26 × 7 cm
Max. hoogte werkstuk
63mm
Max. breedte werkstuk
270mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
10 kg
Poids
0,05 kg
Dimensions
0,5 cm
Poids
2 kg
Dimensions
67 cm
Poids
0,05 kg
Diamètre
18,7mm
Longeur de coupe
9,5mm
Longueur
49mm
Rayon
R3
Queue
8mm
Faces de coupe
2
Poids
0,05 kg
Diamètre
22mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2+1
Poids
0,02 kg
Dimensions
6,5 × 2,5 cm
Poids
0,05 kg
Dimensions
0,5 cm
Poids
10 kg
Poids
2 kg
Diamètre
6mm, 8mm
Poids
1 kg
Poids
8 kg
Max. dikte van het stuk
6-110mm
Max. draagkracht
200kg
Poids
0,05 kg
Diamètre
14mm
Longueur
90mm, 120mm
Queue
10x100mm, 10x60mm
Poids
0,05 kg
Diamètre
6mm
Longeur de coupe
8mm
Longueur
45mm
Angle
90°
Faces de coupe
2
Poids
2 kg
Poids
130 kg
Dimensions
105 × 85 × 110 cm
Voltage
230 V
Moteur
3.5 CV
Diamètre lame de scie
500mm
Max. diamètre de coupe
180mm
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
7 kg
Dimensions
630 × 180 × 140 cm
Longueur du support
400 mm
Diamètre du rouleau
57 mm
Capacité de charge max.
70 kg
Hauteur
720-1030 mm
Nombre de billes
8
Diamètre des billes
16 mm
Poids
0,1 kg
Poids
0,2 kg
Dimensions
20 × 1,27 cm
Poids
ND
Hauteur
75cm, 90cm
Poids
0,5 kg
Diamètre
62mm
Diamètre de l\' arbre
30 mm
Hauteur
120mm
Poids
0,5 kg
Dimensions
1070 × 790 cm
Poids
1 kg
Diamètre
140mm
Diamètre de l\' arbre
30 mm
Faces de coupe
2
Hauteur de rainure
50mm
RPM Min-Max
5000-7500
Poids
1 kg
Diamètre
120mm
Diamètre de l\' arbre
50 mm
Hauteur de rainure
50mm
Poids
690 kg
Dimensions
2950 × 5500 × 1200 cm
Diamètre lame de scie
250mm
Voltage
3 x 400V
Epaisseur de coupe maximale
60 mm
Hauteur de coupe maximale
2100 mm
Longueur de coupe maximale
4100 mm
Basismotor
3 kW
Snelheid motor
3000 t/min
Snelheid voorritser
5800 t/min
Ondersteuning plaat
Slijtvaste stalen rollers
Poids
0,05 kg
Grain
K80, K100, K120
Poids
0,05 kg
Diamètre
18mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2
Poids
250 kg
Moteur
3 CV
Voltage
230 V
Geleidingssysteem
1400 mm
Diamètre de l\' arbre
30 mm
Nominale snelheid
4.000rpm, 6.000rpm, 8.000rpm, 10.000rpm
Freesopening
38mm, 70mm, 100mm, 140mm
Hauteur de rainure
100mm
Table de travail
556x716mm, 220x716mm
Geleider
400x120mm
Connexion d\'extraction
100 mm
Hauteur du plan de travail
860mm
Chassis
590x530mm
Verstekgeleider
-60° – +60°
Poids
0,05 kg
Dimensions
0,9 cm
Poids
1 kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,5 kg
Poids
2 kg
Breedte lijmrol onderaan
122mm, 180mm
Breedte lijmrol bovenaan
92mm
Inhoud lijmbak
1kg, 1,4kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1 kg
Dimensions
600 cm
Diamètre
100mm
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,05 kg
Diamètre
22,2mm
Longeur de coupe
13mm
Longueur
51mm
Rayon
R4,8
Queue
8mm
Faces de coupe
2
Poids
0,1 kg
Poids
0,05 kg
Dimensions
0,4 cm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy