| Description | Ces chevilles brevetées de 8 mm peuvent être utilisées dans toutes les applications où l'on utilise des chevilles en bois. Les chevilles assurent une connexion solide et permanente et sont appliquées sans colle ni outils, ce qui permet une grande facilité d'utilisation et un gain de temps.
Disponible en boîtes de 100, 200 ou 500.
| DEMO MODEL
Manual edgebander for edgebanding pre-glued PVC, melamine or veneer to panels. The special design with adjustable clamps on both sides of the panel ensures high precision and great stability. The machine offers the possibility of surface gluing or with an excess on both sides. Setup time: less than a minute. This edgebander can be used on flat, concave or convex workpieces. With the help of a practical cutting system, it is easy to trim edges. Maximum thickness and width of the edge bands is 1x50mm. | Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps. | Télécommande pour aspirateur Air Flux Cyclone - Air Flux 2000CKH en Air Flux 3000CKH. |
| Content | | Manual edgebander for edgebanding pre-glued PVC, melamine or veneer to panels. The special design with adjustable clamps on both sides of the panel ensures high precision and great stability. The machine offers the possibility of surface gluing or with an excess on both sides. Setup time: less than a minute. This edgebander can be used on flat, concave or convex workpieces. With the help of a practical cutting system, it is easy to trim edges. Maximum thickness and width of the edge bands is 1x50mm. | Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps. | Télécommande pour aspirateur Air Flux Cyclone - Air Flux 2000CKH en Air Flux 3000CKH. |
| Additional information |
| Poids |
ND |
| Pièces |
100 pièces, 200 pièces, 500 pièces
|
|
| Poids |
2,7 kg |
| Max. breedte kanten |
50mm
|
| Max. dikte kanten |
1mm
|
| Temperatuur |
1: 300°C, 2: 525°C
|
| Luchtstroom |
400l/min
|
|
| Poids |
0,05 kg |
| Diamètre |
16mm
|
| Longeur de coupe |
8mm
|
| Longueur |
46mm
|
| Rayon |
R1,6
|
| Queue |
8mm
|
| Faces de coupe |
2
|
|
|
