Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. At the top there is a second roller (width 92mm) for stationary glueing along the top with the machine.
Attention: this hand gluer comes standard with a rubber roller, suitable for vinyl (white) adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available without roller at the top (models EM26D and EM126T).
Modèle de salle d'expo
La Timber Boy TT315 est une scie de table puissante avec un moteur à induction de 2,6 ch et une lame en carbure de tungstène, qui est équipée d'un guide d'onglet et d'une table de travail galvanisée.
Ce support de table pour les serre-joints PRL95 garantit que la pince peut être placée stable sur une table, ce qui facilite beaucoup le serrage.
Jeu de deux supports de pièce à utiliser sur les serre-joints PIHER PRL400.
Fabriqué en polyamide (PA).
EINDEREEKS
De Harvey Falcon series zijn hoogwaardige freesmachines, specifiek ontwikkeld voor industriële freestoepassingen. Ontworpen met het oog op zowel functionaliteit als comfort, beschikt deze machine over alle mogelijke functies voor een freesmachine uit deze klasse. Voorzien van een extra zwaar chassis, een massief aluminium beschermkap met veiligheidsgeleiders en fijnregeling. De krachtige 230V motor levert 3PK en zorgt ervoor dat deze tafel bijna elke freesopdracht aankan. De Harvey Falcon HW303 heeft een as van 30mm. Mits de optioneel verkrijgbare adaptor en spantangen kan de machine ook ingezet worden om te profileren met behulp van bovenfreesjes. De grote gietijzeren tafel garandeert de nodige stabiliteit tijdens het werken. Inzetbaar op vier snelheden, met gecentraliseerd controlepaneel boven de machine.
De HW303ES is voorzien van een slidingsysteem met tafel en verstekgeleider.
ShowroommodelWITH FREE ACCESSORIES:+ SPINDLE FOR ROUTERS 8, 10 & 12 MM+ ADDITIONAL SPINDLE 20 MM+ MOBILE BASE+ MITRE GUIDE
The Itamac Eagle series are high-quality spindle moulding machines, specifically developed for professional routing applications. Designed with both functionality and comfort in mind, this machine has every possible function for a spindle moulder in this class. Equipped with an extra-heavy chassis, a solid cast-iron protective cover with aluminium guides and fine adjustment. The powerful 230V motor delivers 3HP and ensures that this table can handle almost any milling task. The Itamac Eagle HW300E has a 30 mm shaft. With the optionally available shaft and collets, the machine can also be used for profiling with the aid of router bits. The large cast iron table guarantees the necessary stability during work. Can be used at four speeds, with centralised control panel above the machine.
Content
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM25D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM125T has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. Simply press the trigger to run the glue over the roll. Using this trigger you will always obtain the right amount of glue for your project. Thanks to the support, the hand gluer can easily be put away. For cleaning, you can keep this adhesive under water without risk of damage. At the top there is a second roller (width 92mm) for stationary glueing along the top with the machine.
Attention: this adhesive comes standard with a rubber roller, suitable for vinyl adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available without roller at the top (models EM26D and EM126T).
La Timber Boy TT315 est une scie de table puissante avec un puissant moteur à induction de 2,6 ch. Elle est équipée d'un guide d'onglet à serrage excentrique et d'une table de travail galvanisée. Il est fourni en série avec une table d'extension (également galvanisée), des poignées et des roues, ce qui la rend idéale pour une utilisation extérieure prolongée. La lame en carbure de tungstène a un diamètre de 315 mm et un alésage de 30 mm et peut être inclinée de 45° à l'aide de la commande pratique.
Les pieds du châssis peuvent être repliés en un rien de temps, de sorte que la machine peut être transportée facilement dans une voiture particulière.
Ce support de table pour les serre-joints PRL95 garantit que la pince peut être placée stable sur une table, ce qui facilite beaucoup le serrage.
Jeu de deux supports de pièce à utiliser sur les serre-joints PIHER PRL400.
Fabriqué en polyamide (PA).
De Harvey Falcon series zijn hoogwaardige freesmachines, specifiek ontwikkeld voor industriële freestoepassingen. Ontworpen met het oog op zowel functionaliteit als comfort, beschikt deze machine over alle mogelijke functies voor een freesmachine uit deze klasse. Voorzien van een extra zwaar chassis, een massief aluminium beschermkap met veiligheidsgeleiders en fijnregeling. De krachtige 230V motor levert 3PK en zorgt ervoor dat deze tafel bijna elke freesopdracht aankan. De Harvey Falcon HW303 heeft een as van 30mm. Mits de optioneel verkrijgbare adaptor en spantangen kan de machine ook ingezet worden om te profileren met behulp van bovenfreesjes. De grote gietijzeren tafel garandeert de nodige stabiliteit tijdens het werken. Inzetbaar op vier snelheden, met gecentraliseerd controlepaneel boven de machine.
De HW303ES is voorzien van een slidingsysteem met tafel en verstekgeleider.
The Itamac Eagle series are high-quality spindle moulding machines, specifically developed for professional routing applications. Designed with both functionality and comfort in mind, this machine has every possible function for a spindle moulder in this class. Equipped with an extra-heavy chassis, a solid cast-iron protective cover with aluminium guides and fine adjustment. The powerful 230V or 400V motor delivers 3HP and ensures that this table can handle almost any routing task. The Itamac Eagle HW300E has a 30 mm shaft. With the optionally available shaft and collets, the machine can also be used for profiling with the aid of router bits. The large cast iron table guarantees the necessary stability during work. Can be used at four speeds, with centralised control panel above the machine.
Weight
1 kg
2 kg
48 kg
0,02 kg
0,015 kg
260 kg
220 kg
Dimensions
ND
ND
940 × 660 × 470 cm
ND
ND
ND
ND
Additional information
Poids
1 kg
Diamètre lame de scie
125mm, 150mm, 180mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
2,5mm
Epaisseur lame de scie
1,6mm
nombre de dents
12, 18, 24
Poids
2 kg
Breedte lijmrol onderaan
122mm, 180mm
Breedte lijmrol bovenaan
92mm
Inhoud lijmbak
1kg, 1,4kg
Poids
48 kg
Dimensions
940 × 660 × 470 cm
Alésage
30 mm
Diamètre lame de scie
315mm
Profondeur de coupe 45°
50mm
Profondeur de coupe 90 °
90 mm
Moteur
2.6 CV
Table de travail
550 x 800 mm
Table de rallonge
450 x 810 mm
Inclinaison
45°
Poids
0,02 kg
Poids
0,015 kg
Poids
260 kg
Moteur
3 CV
Voltage
230 V
Diamètre de l\' arbre
30 mm
Nominale snelheid
1400rpm, 3000rpm, 7000rpm, 9000rpm
Freesopening
38mm, 70mm, 100mm, 140mm
Hauteur de rainure
100mm
Table de travail
558x725mm
Geleider
423x127mm
Connexion d\'extraction
100 mm
Hauteur du plan de travail
860mm
Chassis
590x530mm
Slidingsysteem
1220x230mm
Verstekgeleider
-50° – +50°
Poids
220 kg
Moteur
3 CV
Voltage
230 V
Diamètre de l\' arbre
30 mm
Nominale snelheid
4.000rpm, 6.000rpm, 8.000rpm, 10.000rpm
Freesopening
38mm, 70mm, 100mm, 140mm
Hauteur de rainure
100mm
Table de travail
556x716mm, 220x716mm
Geleider
400x120mm
Connexion d\'extraction
100 mm
Hauteur du plan de travail
860mm
Chassis
590x530mm
Verstekgeleider
-60° – +60°
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy