| Description | Foret forstner avec queue cylindrique pour percer des charnières invisibles dans le plupart des bois ou panneaux. Cette mèche charnière de haute qualité avec pointe de centrage, deux faces de découpage en widia et deux guides en widia vous assure une finition parfait de tous vos trous. Rotation à droite uniquement.
Cette mèche est disponible en deux longueurs | This pneumatic vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included).
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling. | Electrostatic outer filter for the air filtration system Air Filter AF150, which filters up to 98% of all dust particles up to 5 microns. | Hot air gun with electronic temperature control and two heat settings. This allows you to always adapt the tool to the work you are doing. This heat gun is very suitable for forming or welding plastics, working with stickers/films, shrinking wire wraps and much more. Standard delivery with a nozzle. Moreover, this heat gun is compatible with most accessories on the market today. | Kit de roues à monter sur différentes machines de notre gamme Comfort Line. Utilisez ce kit de roues pour déplacer facilement votre scie à ruban, votre scie à panneaux, votre raboteuse ou votre toupie dans l'atelier. Avec levier détachable pour une manipulation aisée. | Connector à diamètre 100mm pour connecter deux pièces de tuyaux. A utiliser en combinaison avec les systèmes d'aspiration d'Air Flux. |
| Content | Foret forstner avec queue cylindrique pour percer des charnières invisibles dans le plupart des bois ou panneaux. Cette mèche charnière de haute qualité avec pointe de centrage, deux faces de découpage en widia et deux guides en widia vous assure une finition parfait de tous vos trous. Rotation à droite uniquement.
Cette mèche est disponible en deux longueurs | This pneumatic vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, the optional SVN470 auxiliary support is available. This support is specifically designed to connect to the SVN450 model. With the help of a distribution block, you can connect a maximum of 4 supports at the same time. In this way you can operate them synchronously. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling. | Electrostatic outer filter for the air filtration system Air Filter AF150. It filters up to 98 % of all dust particles up to 5 microns. | Hot air gun with electronic temperature control and two heat settings. This allows you to always adapt the tool to the work you are doing. This heat gun is very suitable for forming or welding plastics, working with stickers/films, shrinking wire wraps and much more. Standard delivery with a nozzle. Moreover, this heat gun is compatible with most accessories on the market today. | Kit de roues à monter sur différentes machines de notre gamme Comfort Line. Utilisez ce kit de roues pour déplacer facilement votre scie à ruban, votre scie à panneaux, votre raboteuse ou votre toupie dans l'atelier. Avec levier détachable pour une manipulation aisée. | Connector à diamètre 100mm pour connecter deux pièces de tuyaux. A utiliser en combinaison avec les systèmes d'aspiration d'Air Flux. |
| Additional information |
| Poids |
0,05 kg |
| Diamètre |
25mm
|
| Longueur |
90mm, 120mm
|
| Queue |
10x100mm, 10x60mm
|
|
| Poids |
1 kg |
| Dimensions |
16 × 20 × 2,2 cm |
| Afmetingen werkvlak |
150x150mm
|
| Force de fixation |
800gr/cm² à 6 bar
|
| Werkdruk |
5,5-7 bar
|
| Luchtverbruik bij 5,5 bar |
28l/min
|
|
|
| Poids |
0,75 kg |
| Temperatuur |
1: 300°C, 2: 525°C
|
| Luchtstroom |
400l/min
|
|
|
| Poids |
0,05 kg |
| Diamètre |
100mm
|
|
