Description | Grâce à son support en oxyde d'aluminium brun et lin, le DuroFlap offre une finition homogène et de haute qualité lorsqu'il est utilisé sur l'acier, l'acier inoxydable et les métaux non ferreux.
Disponible dans différentes tailles de grains. | Ces raboteuses et scies portables et compactes 230V sont uniques sur le marché. Largeur de rabotage de 200 mm et hauteur de coupe de 97 mm dans une seule machine. Equipé d'un moteur à induction de 2,8 CV. | Verplaatst grote panelen op een ergonomische manier met de Kreg Platendrager. Klemmen, optillen en wegwezen! Het dragen van grote platen wordt makkelijker. U kan platen zelf verplaatsen zonder extra inspanning of risico op beschadiging van het materiaal. Schuif gewoon de grote pads over het paneel en til de hendel op om het vast te klemmen en automatisch aan te passen aan de materiaaldikte. De pads zijn bekleed met Kreg GripMaxx™ om een sterke, veilige grip te garanderen zonder beschadigingen, deuken of vlekken. Zélfs op kwetsbaar multiplex fineer.
De ergonomische handgreep heeft een dikke, duurzame vulling, dit maakt het dragen van de platen aangenaam. Bovendien, hoe meer u de handgreep optilt, hoe strakker de kussentjes knijpen om wegglijden te voorkomen. De paneeldrager is een geweldige aanvulling voor elke projectbouwer. | Bandsaw blade with length 3607mm for use on the TT500X band saw machine from Tendotools. This saw blade has 4 TPI (teeth per inch) and has a width of 13, 16 or 20mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth. Thickness of 0,80mm, the saw ribbon of 13mm has a thickness of 0,65mm. | Last pieces!
The Job-Saw TT255 is a powerful and compact machine for all carpentry work in the workshop or on the job site. The telescopic extension table goes up to a length of 1030 mm. Equipped with built-in hoover with a large collection bag. Cutting height of 82 mm at 90° and easily tiltable to 45°. Easy to move and with telescopic handle. Width guide with eccentric clamping. | SHOWROOM MODEL, old colours 2022
The Air Flux3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement. | Afsluitschuif met diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. Voorzien aan een zijde van schroefdraad voor de flexibele afzuigslang en aan andere zijde van quick aansluiting die past op andere PVC accessoires van Ø 100 mm. | Double ventouse sur un corps fixe. Corps en alliage d'aluminium solide. Comprend une housse de protection. Utilisation à une main. Cette ventouse a une capacité de charge de 60 kg. | Blast gate diameter 100mm to be used with the Air Flux dust extractors. Threaded on one side for the flexible extraction hose and on the other side with a quick connection that fits other PVC accessories of Ø 100 mm. |
Content | Grâce à son support en oxyde d'aluminium brun et lin, le DuroFlap offre une finition homogène et de haute qualité lorsqu'il est utilisé sur l'acier, l'acier inoxydable et les métaux non ferreux. Il donne une finition excellente et constante sur une longue période et est universellement applicable au métal et à l'acier inoxydable. | Ces raboteuses et scies portables et compactes 230V sont uniques sur le marché. Par rapport à toutes les autres machines plus petites, elles fonctionnent avec des moteurs à induction très puissants.
Un moteur à induction a 30% de puissance en plus qu'un moteur à balais de charbon et est plus de 40% plus silencieux. De plus, il ne nécessite aucun entretien car aucun balai de charbon n'a besoin d'être remplacé. De plus, ils sont entraînés de manière industrielle au moyen de courroies poly au lieu des courroies trapézoïdales classiques. La construction du cadre est également très unique et robuste, car une tôle d'acier de 3,5 mm d'épaisseur est utilisée. L'ensemble garantit d'excellentes performances, mais également une résistance optimale pour votre machine.
Changement très rapide de la fonction de rabotage à la fonction de sciage en repositionnant la courroie.
La particularité de ceci est que ces modèles fonctionnent avec un bloc de couteaux séparé pour chaque opération. L'entraînement indépendant fournit la vitesse idéale pour le rabotage et le sciage, de sorte que la raboteuse et la scie tournent également séparément pour plus de sécurité. Grâce au système de micro-levage des tables de rabotage, la profondeur de rabotage peut être réglée très précisément et en douceur, mais les tables peuvent également être fermées complètement de manière rapide. En fermant complètement les tables, la table de scie a une grande surface de travail. Cet Universal 2.0 a une lecture très claire et précise pour chaque paramètre.
Le guide peut être bloqué à la fois devant et derrière la table de travail, ce qui garantit un travail stable et précis. Il peut également être réglé en angle ou en onglet avec une lecture très claire, et ceci aussi bien pour le rabotage que pour le sciage. Pour la machine à scier, il existe également une jauge à onglets avec indication claire des degrés. La machine est conçue pour fonctionner avec des fraises à rainurer jusqu'à 10 mm d'épaisseur.
La construction de haute qualité de ces machines compactes telles que la tôle d'acier épaisse, l'entraînement direct, les moteurs à induction, les roulements à billes de haute qualité, le grand ensemble robuste et les poignées rotatives confèrent à cette machine un énorme confort d'utilisation avec d'excellentes performances et une durée de vie optimale.
Les machines multifonctionelle portable et equipe standard de guide de scieage, scie, couteaux, coin de fente, poignee, outils de rabotage | Verplaatst grote panelen op een ergonomische manier met de Kreg Platendrager. Klemmen, optillen en wegwezen! Het dragen van grote platen wordt makkelijker. U kan platen zelf verplaatsen zonder extra inspanning of risico op beschadiging van het materiaal. Schuif gewoon de grote pads over het paneel en til de hendel op om het vast te klemmen en automatisch aan te passen aan de materiaaldikte. De pads zijn bekleed met Kreg GripMaxx™ om een sterke, veilige grip te garanderen zonder beschadigingen, deuken of vlekken. Zélfs op kwetsbaar multiplex fineer.
De ergonomische handgreep heeft een dikke, duurzame vulling, dit maakt het dragen van de platen aangenaam. Bovendien, hoe meer u de handgreep optilt, hoe strakker de kussentjes knijpen om wegglijden te voorkomen. De paneeldrager is een geweldige aanvulling voor elke projectbouwer. | Bandsaw blade with length 3607mm for use on the TT500X band saw machine from Tendotools. This saw blade has 4 TPI (teeth per inch) and has a width of 13, 16 or 20mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth. | The Job-Saw TT255 is a powerful and compact machine for all carpentry work in the workshop or on the job site. The telescopic extension table goes up to a length of 1030 mm. Equipped with built-in extractor with a large collection bag. Cutting height of 82 mm at 90° and easily tiltable to 45°. Easy to move and with telescopic handle. Width guide with eccentric clamping. | The Air Flux 3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
| Afsluitschuif met diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. Voorzien aan een zijde van schroefdraad voor de flexibele afzuigslang en aan andere zijde van quick aansluiting die past op andere PVC accessoires van Ø 100 mm. | Double ventouse sur un corps fixe. Corps en alliage d'aluminium solide. Comprend une housse de protection. Utilisation à une main. Cette ventouse a une capacité de charge de 60 kg. | Blast gate diameter 100mm to be used with the Air Flux dust extractors. Threaded on one side for the flexible extraction hose and on the other side with a quick connection that fits other PVC accessories of Ø 100 mm. |
Additional information |
Poids |
0,300 kg |
Dimensions |
10 × 12 cm |
Grain |
K60, K120
|
|
Poids |
36 kg |
Moteur |
2.8 CV
|
Profondeur de coupe 90 ° |
97 mm
|
Largeur de rabotage |
200 mm
|
Diamètre lame de scie |
250mm
|
Voltage |
230 V
|
| |
Poids |
0,5 kg |
Longueur |
3607mm
|
Largeur |
13mm, 16mm, 20mm
|
Dikte |
0,65mm, 0,80mm
|
|
|
Poids |
300 kg |
Dimensions |
730 × 1730 × 2280 cm |
Puissance |
4PK
|
aantal filters |
15
|
Filter afmetingen |
160 x 1030 mm
|
filtratie oppervlakte |
7.75 m2
|
afvalopslag |
metal container (60x60x72cm)
|
capaciteit |
3500m3
|
|
Poids |
0,5 kg |
Diamètre |
100mm
|
|
Poids |
0,94 kg |
Supporte |
60kg
|
Diamètre |
12,3cm
|
|
Poids |
0,5 kg |
Diamètre |
100mm
|
|