| Description | Jeu complet en coffret en bois, finition anticorrosion (gold-bicromat) avec clé à couronne dentée pratique et 3 jeux de mors et 1 mandrin. | DEMO MODEL, ONE PIECE ONLY
MODEL WITH PEB250
Portable edge bander PEB200+ or PEB250+ pre-mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edgebanding with thicknesses between 0.4-3mm and 10-62mm height. Choice of table with model PEB200+ or PEB250+. Both are suitable for gluing the same types of panels with one important difference. The model PEB250+ has speed and temperature control. The table is equipped with a holder for rolls and a manual end cutter.
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain. | Connector diameter 100mm to connect multiple pieces of Air Flux accessories. To be used with the Air Flux dust extractors. | Separate large wood chips from your system before they reach your dust collector. A pair of plastic elbow and coupling components serve as input and output points when you install them at either end of a barrel, bin, or other receptacle you plan to use to capture large wood chips. This system prevents wear and tear on your dust collector and you don't have to empty it as often. The two coupling components fit a standard 100mm hose.
This set comes with a template to make the correct holes in your container for mounting the two connection points.
Need inspiration? View the construction plan at downloads and easily create your own collection container. | Thanks to these router bits you can cut a half-round groove on every kind of wood. Easily make decorative grooves to break up large vertical surfaces or to decorate furniture. Finally, the grooves also provide a better grip. For example for handles or drawers. Pass multiple times when removing large quantities of material. | Promopakket voor de zaagtafel BELMASH CBS 2400
Zaaghoogte 0-103mm, 45°-70 MM zaaghoogte met mogelijkheid om te werken met groefvrezen. | Sanding belt for sander TT2500LBS - 7100 x 150 mm |
| Content | Jeu complet en coffret en bois, finition anticorrosion (gold-bicromat). Livré avec une clé à couronne dentée pratique et 4 jeux de mors.
Tous les mors sont pourvus de rainures d'adhérence à l'intérieur et à l'extérieur Pourvu d'un mors plateau, un entraîneur à serrage rapide et un entrâineur de vis. | Portable edge bander PEB200+ or PEB250+ pre-mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The automatic rollers and feed with guide system ensure that the edgebanding always lands correctly on your panel. The height and thickness of the edge band is very easy to adjust using the millimetre control. Finally, the machine also has an adjustable glue dosage so that you always use the right quantity for your workpiece.
Choice of table with model PEB200+ or PEB250+. Both are suitable for gluing the same types of panels with one important difference. The model PEB250+ has speed and temperature control. This makes this model more suitable for use on round or moulded panels. The table is equipped with a holder for rolls and a manual end cutter. The edge bander can be easily removed from the table for mobile work. In that case you must use pre-cut edge bands.
Patented glue pot
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain. This also means that you can use other colored adhesives quickly and without any problems. No additional adjustments are required to change the glue between two projects, even if it's differently colored. The adhesive rollers have been polymerised to prevent damage to your edge bands. | Connector diameter 100mm to connect multiple pieces of Air Flux accessories. To be used with the Air Flux dust extractors. | Separate large wood chips from your system before they reach your dust collector. A pair of plastic elbow and coupling components serve as input and output points when you install them at either end of a barrel, bin, or other receptacle you plan to use to capture large wood chips. This system prevents wear and tear on your dust collector and you don't have to empty it as often. The two coupling components fit a standard 100mm hose.
This set comes with a template to make the correct holes in your container for mounting the two connection points.
Need inspiration? View the construction plan at downloads and easily create your own collection container. | Thanks to these router bits you can cut a half-round groove on every kind of wood. Easily make decorative grooves to break up large vertical surfaces or to decorate furniture. Finally, the grooves also provide a better grip. For example for handles or drawers. Pass multiple times when removing large quantities of material. | Promotiepakket voor de zaagtafel BELMASH CBS2400, samengesteld uit: Sponningfrees 10mm, Air Flux AF 1100/45, 2 Meter clearview 100mm, Klembanden 2x, Multi adaptor 3DU1004. | Sanding belt for sander TT2500LBS
7100 x 150 mm
Available in grit 60 - 80 - 100 - 120 |
| Additional information |
| Filetage |
M33
|
| Ouverture maximale |
889 mm
|
|
| Poids |
30 kg |
| Met kantenlijmer |
PEB200+, PEB250+
|
| Puissance |
830W
|
| Inhoud lijmbak |
230cm³
|
| Temperatuur (met PEB200+) |
170°C
|
| Werksnelheid (met PEB200+) |
3.6m/min
|
| Temperatuur (met PEB250+) |
120 – 200°C
|
| Werksnelheid (met PEB250+) |
2-6m/min
|
| Min-Max. hoogte band |
10-62mm
|
| Min-Max. dikte band |
0.4-3mm
|
|
| Poids |
0,05 kg |
| Diamètre |
100mm
|
|
| Poids |
1 kg |
| Diamètre |
100mm
|
|
| Poids |
0,05 kg |
| Diamètre |
38mm
|
| Longeur de coupe |
32mm
|
| Longueur |
70mm
|
| Rayon |
R19
|
| Queue |
12mm
|
| Faces de coupe |
2
|
|
|
| Poids |
0,05 kg |
| Grain |
K60, K80, K100, K120
|
|
