Etau en fonte à utiliser sur les établis en bois de Pinie. Il est recommandé de le monter sur la pince Bench6 pour ne pas endommager votre plan de travail. La largeur de la mâchoire est de 100mm. Grâce à la plaque pivotante intégrée, l'étau peut pivoter d'environ 35°.
Lame de scie avec 28 dents
Lame de scie de construction avec denture trapézoïdale et un large dos pour un meilleur soutien de la dent. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour une utilisation sur des palettes ou du bois avec des restes de clous,... Grâce au dos large, les dents risquent moins d'être endommagées si vous heurtez des clous ou d'autres débris dans le bois pendant le sciage. Idéal pour les scies de chantier ou les scies circulaires à chevalet. Made in Germany, profitez de la solide qualité allemande.
Antistatic hose length 6 meter diameter 100 mm. To be used in combination with the Dust Extractors by Air Flux.
The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).
The Kreg 720 Pro comes with a Docking Station. This extension provides more support for larger equipment and more storage space. The side pieces of the Docking Station can be easily folded to store the system when not in use. In addition, the side pieces can also be disconnected from the system so that you can create even more support for your workpiece.
You can measure the thickness of the material with the supplied material thickness gauge. At the bottom of the Kreg 720 is a built-in storage system for the drill, driver bits and material thickness gauge.
Hoogwaardige machine ontworpen voor het borstelen, polijsten en verouderen van verschillende oppervlakken. Maakt het mogelijk om verf op hout opnieuw te verwijderen. Deze borstelmachine kan ook krassen uit metaal verwijderen. Om dit te doen heeft Virutex een gamma van verschillende borstels, elks met hun eigen toepassing. Uitgerust met een krachtige motor van 1.400W die beschermd is tegen het stof. Nauwkeurige werking en elektronische softstart. Voorzien van elektronische snelheidsregeling. Verstelbaar geleidingssysteem voor eenvoudig en veilig werken. Met aansluiting voor externe stofafzuiging. Standaardlevering inclusief een nylon borstel (ref. 6291214). Andere types borstel verkrijgbaar op aanvraag.
For connecting panels of 16 or 19mm thickness using dowels (Ø8mm) or screws. Work with a high precision & high quality finish, without the need for retrofitting. This position guide is suitable for drilling holes on the end, along the side, or at any position in the centre of the panel. Maximum width of the panel to place the guide is 630mm. Standard delivery with inserts for 16 mm boards, reducer rings and drill stop.
Promoset van de Durotec structuur borstelmachine voor houtbewerking. De machine wordt geleverd inclusief tal van borstels voornamelijk gericht op houtbewerking.
Door de aankoop van de Durotec-machine in deze promoset bespaart u maar liefst € 226,25.
Bekijk de VIDEO
Hijsklemmen voor het veilig transporteren, heffen en draaien van staalplaten in verticale positie. Voorzien van gehard stalen bekken en veiligheid sluitsysteem. De hijsklem is beschikbaar in verschillende groottes.
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in high quality carbide (widia) with diameter Ø700mm. This model is equipped with a three-point hitch and connection for PTO shaft. The machine can thus be powered by a tractor. Just like the other TT700 models, this sawing machine is equipped with belt drive. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 240mm.
Fully assembled on delivery and ready to use.
Saw blade with 48 teeth
Multipurpose saw blade with WZ alternate top bevel teeth for quickly cutting along and across grain of all natural woods, wooden boarding materials or one sided veneer and plastic coated materials. For use on table saws. No noise saw blades.
The Belmash RS-02 is invaluable when working with longer pieces of wood than the work table can support. This roller support provides a safe and easy way to work with these oversized pieces. Easy and convenient to use. Equipped with Teflon rollers to prevent damage to your workpiece. Height adjustable between 700mm and 1050mm.
Content
Etau en fonte à utiliser sur les établis en bois de Pinie. Il est recommandé de le monter sur la pince Bench6 pour ne pas endommager votre plan de travail. La largeur de la mâchoire est de 100mm. Grâce à la plaque pivotante intégrée, l'étau peut pivoter d'environ 35°.
Lame de scie avec 28 dents
Lame de scie de construction avec denture trapézoïdale et un large dos pour un meilleur soutien de la dent. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour une utilisation sur des palettes ou du bois avec des restes de clous,... Grâce au dos large, les dents risquent moins d'être endommagées si vous heurtez des clous ou d'autres débris dans le bois pendant le sciage. Idéal pour les scies de chantier ou les scies circulaires à chevalet. Made in Germany, profitez de la solide qualité allemande.
Antistatic hose length 6 meter diameter 100 mm. To be used in combination with the Dust Extractors by Air Flux.
The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).
The Kreg 720 Pro comes with a Docking Station. This extension provides more support for larger equipment and more storage space. The side pieces of the Docking Station can be easily folded to store the system when not in use. In addition, the side pieces can also be disconnected from the system so that you can create even more support for your workpiece.
With the supplied material stop you make repetitive work even easier. You simply slide the stop onto the side piece of the Docking Station and this creates extra stability for your workpiece. The material stopper can be stored in the Docking Station after use.
The included steel Pocket-Hole Jig clamp is ideal for clamping your connection system to your work surface. This makes it a complete and professional connection system for your workbench. The clamp is also easy to store in the Docking Station after use.
Setting up the Kreg Jig 720 Pro is quick and easy. You simply put your material in the jig and push the handle down. The system then does all the work for you and adjusts to the correct thickness. The handle also gives you full control over the clamping force! In addition, the system has anti-slip material. This will hold your workpiece securely in place without marking your wood.
You can measure the thickness of the material with the supplied material thickness gauge. The following sizes are indicated on it: 1/2”, 3/4” and 1 1/2” (13, 19 and 38 mm). These measurements correspond to the measurements on the step drill. You tighten the drill stop to the correct size with the material thickness gauge which is also an Allen key.
At the bottom of the Kreg 720 Pro is a built-in storage system for the drill, screw bits and the material thickness gauge. Next to the storage space, the dimensions are shown, with several intermediate steps. This allows you to set the stop collar even more precisely on the drill bit.
The Kreg 720 Pro connection system also comes with an extraction piece that can be attached to the left and right of the drilling jig. An extraction hose can then be connected to this. In this way, dust and wood chips are sucked out of the way and you continue to have a good view of your work surface. This makes making pocket holes a lot more efficient.
The Kreg connection system can be used horizontally and vertically. This way you can make pocket holes however you want.
As you are used to from Kreg, this system is also built on durability. Thanks to the shock-resistant and durable plastic construction with a hardened steel core, you can rest assured that the system will last.
The 720 Pro comes with a whopping 160 Pocket-Hole screws in the two most popular sizes. You will also receive a project plan. So you can get started right away!
Hoogwaardige machine ontworpen voor het borstelen, polijsten en verouderen van verschillende oppervlakken. Maakt het mogelijk om verf op hout opnieuw te verwijderen. Deze borstelmachine kan ook krassen uit metaal verwijderen. Om dit te doen heeft Virutex een gamma van verschillende borstels, elks met hun eigen toepassing. Uitgerust met een krachtige motor van 1.400W die beschermd is tegen het stof. Nauwkeurige werking en elektronische softstart. Voorzien van elektronische snelheidsregeling. Verstelbaar geleidingssysteem voor eenvoudig en veilig werken. Met aansluiting voor externe stofafzuiging. Standaardlevering inclusief een nylon borstel (ref. 6291214). Andere types borstel verkrijgbaar op aanvraag.
For connecting panels of 16 or 19mm thickness using dowels (Ø8mm) or screws. Work with a high precision & high quality finish, without the need for retrofitting. This position guide is suitable for drilling holes on the end, along the side, or at any position in the centre of the panel. Maximum width of the panel to place the guide is 630mm. Standard delivery with inserts for 16 mm boards, reducer rings and drill stop.
Promoset van de Durotec structuur borstelmachine voor houtbewerking.
Geschikt voor:
Structureren van houten oppervlakken
Kunstmatig verouderen van hout
Opfrissen van oude meubelen
...
Hijsklemmen voor het veilig transporteren, heffen en draaien van staalplaten in verticale positie. Voorzien van gehard stalen bekken en veiligheid sluitsysteem. De hijsklem is beschikbaar in verschillende groottes.
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. Includes zero voltage protection on the switch for improved safety in the event of voltage loss. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in high quality carbide (widia) with diameter Ø700mm. This model is equipped with a three-point hitch and connection for PTO shaft. The machine can thus be powered by a tractor. Transmission to the saw blade with belt drive. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 240mm.
The tilting saw is equipped with an automatic return unit using a spring. The saw blade is effortless to operate and cuts quickly through the wood. Saw large quantities of wood in one go without any problems and ergonomically. Using the extendable support and size indication, you can cut even longer pieces to the same size. Equipped with a sturdy base with two wheels and a pull rod which makes it easy to move the machine. Easy to move, both indoors and outdoors and on uneven surfaces. Couple this tilting log saw to your tractor to be able to use it directly anywhere. Fully assembled on delivery and ready to use.
Saw blade with 48 teeth
Multipurpose saw blade with WZ alternate top bevel teeth for quickly cutting along and across grain of all natural woods, wooden boarding materials or one sided veneer and plastic coated materials. For use on table saws. No noise saw blade with anti-kickback design.
The Belmash RS-02 is invaluable when working with longer pieces of wood than the work table can support. This roller support provides a safe and easy way to work with these oversized pieces. Easy and convenient to use. Equipped with Teflon rollers to prevent damage to your workpiece. Height adjustable between 700mm and 1050mm.
Weight
12,5 kg
1 kg
1 kg
3 kg
3,6 kg
0,5 kg
6 kg
ND
130 kg
1 kg
5,2 kg
Dimensions
ND
ND
600 cm
ND
ND
63 cm
ND
ND
105 × 85 × 110 cm
ND
ND
Additional information
Poids
12,5 kg
Poids
1 kg
Diamètre lame de scie
400mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,8mm
nombre de dents
28
Poids
1 kg
Dimensions
600 cm
Diamètre
100mm
Poids
3 kg
Schacht boor
6.35 mm
Boordiameter
9.5 mm
Min. materiaaldikte
13 mm
Max. materiaaldikte
38 mm
Poids
3,6 kg
Puissance
1300W
Borstelafmetingen
110x100x19mm
Nominale snelheid
1000-4000rpm
Poids
0,5 kg
Dimensions
63 cm
Poids
6 kg
Puissance
800W
RPM Min-Max
1200-3900
Poids
ND
Épaisseur de serrage maximale
1,5cm, 2cm, 2,5cm, 3cm, 5cm
Supporte
500kg, 1000kg, 2000kg, 3000kg, 5000kg
Poids
130 kg
Dimensions
105 × 85 × 110 cm
Moteur
7 CV
Diamètre lame de scie
700mm
Max. diamètre de coupe
240mm
Poids
1 kg
Diamètre lame de scie
550mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
4,2mm
Epaisseur lame de scie
3,0mm
nombre de dents
48
Orifices de traction
PH01
Poids
5,2 kg
Draagkracht
50kg
Hauteur
700-1050mm
Voet
475x490mm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy