Une version petite et compacte des établis en bois Pinie, équipée de tous les éléments essentiels. L'établi peut être facilement monté sur n'importe quelle table à l'aide d'une pince. Ce poste de travail Pinie est donc un accessoire indispensable pour tout bricoleur ou artisan qui ne dispose pas d'un espace suffisant pour un établi classique. La table de travail est entièrement réalisée en hêtre et a une épaisseur de 80 mm. L'ensemble de cet établi comprend une paire de poteau cylindrique professionnels (Ø19mm) en acier plein. Par défaut, cet établi sera également huilé. Il est recommandé de répéter cette opération tous les deux ans.
L'établi est équipé d'un étau en fonte avec poignée en bois ou d'une poignée détachable. Choisissez la bonne option pour votre projet ou votre application.
Laatste stuks!
De ADAMIK VC-5 zuignap is een dubbelzijdige zuignap die zich met een druk op de werkbank vastzet. Dankzij deze technologie is het eenvoudig om de afmetingen van het bewerkte oppervlak te wijzigen. De VC-5 zuignap is ontworpen om niet-poreuze werkstukken vast te klemmen tijdens het banderen, frezen, snijden, slijpen, boren, enz.
Het grote voordeel van de VC-5 zuignap is de methode om een vacuüm te creëren door middel van het Venturi-systeem, waardoor het werkstuk wordt samengedrukt door perslucht van een conventionele compressor.
De zuignap kan zowel horizontaal als verticaal gebruikt worden.
Langgatboren met spaanbrekers, zowel links- als rechtsdraaiend verkrijgbaar. Deze boren zijn uiterst geschikt voor het boren van diepe gaten of sleuven in de meeste houtsoorten. Voorzien van twee snijvlakken in 18% HSS hoogwaardig staal en spaanbrekers.
Deze set bestaat uit boren van diameter: 6 - 8 - 10 - 12 - 14 - 16mm. Verkrijgbaar in linkse of rechtse draairichting
MODÈLE D'EXPOSITION - NOUVEAU
Le rabot de menuiserie CPL 270 est fabriqué en aluminium et en acier, et dispose d’un arbre de rabotage tout en acier avec deux couteaux de rabotage.
Le moteur puissant, le front pointu et l'évacuation des copeaux à l'avant assurent que la machine reste parfaitement utilisable avec du bois sec et humide, sans que la tranchée ne soit encombrée par la grande quantité de copeaux. Ceci permet le rabotage de madriers longs en une seule fois.
La profondeur du rabot est facilement réglable par un bouton rotatif de 0 à 3 mm, ce qui garantit que le rabot continue à fonctionner de manière fluide et précise même après une utilisation prolongée.
Le CPL 270 est le partenaire idéal de tout charpentier sur un chantier de construction.
Robust and fully steel, mobile saw table for quick, easy and safe sawing of firewood. This saw table is fully compliant with the CEN safety standards for this type of machinery. Equipped with a cover so that you cannot approach the saw blade while working. Includes zero voltage protection on the switch for improved safety in the event of voltage loss. Brennholz has been synonymous with reliability and safety for years. At the top the machine is fitted with a claw with coarse teeth to hold the wood. This claw has a double safety function. On the one hand, the claw holds the wood and on the other hand it blocks the cutting table when the claw is not lowered.
Fully assembled on delivery and ready to use.
Promotiepakket van langbandschuurmachine TT2515H inclusief afzuiginstallatie, afzuigslang, klembanden en extra schuurbanden. De TT2515H heeft een schuurband van 2515 x 152 mm en een contourtafel voor rondschuurwerk, en ze is voorzien van een afzuigmond van 100 mm. De schuurband is uitgerust met een oscillatiesysteem: de band beweegt constant op en neer, wat strepen op het hout voorkomt.
Content
Une version petite et compacte des établis en bois Pinie, équipée de tous les éléments essentiels. L'établi peut être facilement monté sur n'importe quelle table à l'aide d'une pince. Ce poste de travail Pinie est donc un accessoire indispensable pour tout bricoleur ou artisan qui ne dispose pas d'un espace suffisant pour un établi classique. La table de travail est entièrement réalisée en hêtre et a une épaisseur de 80 mm. L'ensemble de cet établi comprend une paire de poteau cylindrique professionnels (Ø19mm) en acier plein. Par défaut, cet établi sera également huilé. Il est recommandé de répéter cette opération tous les deux ans.
L'établi est équipé d'un étau en fonte avec poignée en bois ou d'une poignée détachable. Choisissez la bonne option pour votre projet ou votre application.
De ADAMIK VC-5 zuignap is een dubbelzijdige zuignap die zich met een druk op de werkbank vastzet. Dankzij deze technologie is het eenvoudig om de afmetingen van het bewerkte oppervlak te wijzigen. De VC-5 zuignap is ontworpen om niet-poreuze werkstukken vast te klemmen tijdens het banderen, frezen, snijden, slijpen, boren, enz.
Het grote voordeel van de VC-5 zuignap is de methode om een vacuüm te creëren door middel van het Venturi-systeem, waardoor het werkstuk wordt samengedrukt door perslucht van een conventionele compressor.
De zuignap kan zowel horizontaal als verticaal gebruikt worden.
Langgatboren met spaanbrekers, zowel links- als rechtsdraaiend verkrijgbaar. Deze boren zijn uiterst geschikt voor het boren van diepe gaten of sleuven in de meeste houtsoorten. Voorzien van twee snijvlakken in 18% HSS hoogwaardig staal en spaanbrekers.
Verkrijgbaar in linkse of rechtse draairichting. Deze set bestaat uit boren van volgende diameter + lengte:
Ø6mm - 105mm
Ø8mm - 115mm
Ø10mm - 125mm
Ø12mm - 135mm
Ø14mm - 145mm
Ø16mm - 155mm
Le rabot de menuiserie CPL 270 est fabriqué en aluminium et en acier, et dispose d’un arbre de rabotage tout en acier avec deux couteaux de rabotage.
Le moteur puissant, le front pointu et l'évacuation des copeaux à l'avant assurent que la machine reste parfaitement utilisable avec du bois sec et humide, sans que la tranchée ne soit encombrée par la grande quantité de copeaux. Ceci permet le rabotage de madriers longs en une seule fois.
La profondeur du rabot est facilement réglable par un bouton rotatif de 0 à 3 mm, ce qui garantit que le rabot continue à fonctionner de manière fluide et précise même après une utilisation prolongée.
Le CPL 270 est le partenaire idéal de tout charpentier sur un chantier de construction.
Robust and fully steel, mobile saw table for quick, easy and safe sawing of firewood. This saw table is fully compliant with the CEN safety standards for this type of machinery. Equipped with a cover so that you cannot approach the saw blade while working. Includes zero voltage protection on the switch for improved safety in the event of voltage loss. Brennholz has been synonymous with reliability and safety for years. Experience all the advantages of solid Austrian quality thanks to this firewood saw. This sawing machine is equipped with a saw blade in German chrome with diameter Ø650mm. The direct drive induction motor delivers 3.5 HP.
At the top the machine is fitted with a claw with coarse teeth to hold the wood. This claw has a double safety function. On the one hand, the claw holds the wood and on the other hand it blocks the cutting table when the claw is not lowered. Thanks to all these features, this table is very suitable for cutting branches or tree trunks between 80mm and 205mm thick. The saw blade is effortless to operate and cuts quickly through the wood. This allows you to cut large quantities of wood in one go without any problems and ergonomically. Equipped with a strong base with two castors and a sturdy handle making it easy to move the machine. Easy to move, both indoors and outdoors and on uneven surfaces. Fully assembled on delivery and ready to use. Use at least power cable with thickness 2.5m² to avoid damaging the motor.
Promotiepakket van langbandschuurmachine TT2515H inclusief afzuiginstallatie, afzuigslang, klembanden en extra schuurbanden. De TT2515H heeft een schuurband van 2515 x 152 mm en een contourtafel voor rondschuurwerk, en ze is voorzien van een afzuigmond van 100 mm. De schuurband is uitgerust met een oscillatiesysteem: de band beweegt constant op en neer, wat strepen op het hout voorkomt.
Weight
ND
0,325 kg
ND
17 kg
140 kg
190 kg
Dimensions
65 × 35 × 8 cm
16 × 20 × 2,2 cm
ND
ND
ND
ND
Additional information
Poids
ND
Dimensions
65 × 35 × 8 cm
Levier
Détachable, En bois
Poids
0,325 kg
Dimensions
16 × 20 × 2,2 cm
Afmetingen werkvlak
150x150mm
Force de fixation
800gr/cm² à 6 bar
Werkdruk
5,5-7 bar
Luchtverbruik bij 5,5 bar
28l/min
Diamètre
6mm, 8mm, 10mm, 12mm, 14mm, 16mm
Longueur
105mm, 115mm, 125mm, 135mm, 145mm, 155mm
Queue
16x50mm
Sens de rotation
A gauche, A droite
Poids
17 kg
Puissance
1500W
Voltage
230 V
Largeur de rabotage
270 mm
Profondeur de rabotage
0-3 mm
Vitesse raboteuse
12.400
Longueur
490mm
Poids
140 kg
Voltage
230 V
Moteur
3.5 CV
Diamètre lame de scie
650mm
Max. diamètre de coupe
230mm
Poids
190 kg
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy