Fraise en carbure de tungstène avec un angle de 15°. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW. Le chanfrein peut être ajusté en changeant la hauteur de l'embout. Facile à utiliser en utilisant le roulement à billes comme guide.
Showroommodel
Only one piece available!
Portable edge bander PEB250+ mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The model PEB250+ has speed and temperature control. Table equipped with holder for rolls and automatic end trimmer.
The edge bander PEB250TA, like all other Virutex models, is fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain.
Verloopstuk voor de verschillende modellen stofafzuiging van Air Flux. Af te snijden op de correcte diameter.
Anti-slip voetje voor gebruik op de PIHER klemmen Mod. POT.
Gemaakt uit staal.
Sanding belt for sander TT2010 - 2010 x 152 mm
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Met deze pad maak je jou Piher PRL95 klem weer als nieuw.
De pad klik je gewoon op de klem wanneer de originele pad te beschadigd geworden is.
De GuidePRO is voorzien van een siliconenveer die een constante druk uitoefent langs de verticale rand van het werkstuk om een gelijkmatig contact tussen het werkstuk en de geleider te garanderen, waardoor de best mogelijke snede wordt verkregen. De siliconen veer buigt om variaties in materiaalvorm op te vangen en trillingen te dempen. De veer is ook gemakkelijk te vervangen als hij beschadigd is.
With the DuroNyl brush, you can accentuate the characteristic wood texture of wooden surfaces. Processing with this brush removes the softer wood of the more recent annual rings, while leaving the harder wood of the older annual rings intact.
Brushed wood surfaces find their application in various applications, such as the manufacture of rustic furniture, the furnishing of rustic cafes and restaurants (wall and ceiling cladding), or in the construction of beams.
Available in various grit sizes.
Pièce de réduction à utiliser avec les modèles differents des aspirateurs Air Flux. A couper sur le propre diamètre.
SOLDES
Avec ce coupeur de stratifié, vous pouvez facilement couper le stratifié à la bonne longueur.
Une coupe nette en 2 étapes simples :
Placez la pièce sous la lame et appuyez-la contre la butée.
Appuyez sur le levier en un seul mouvement.
Utilisez toujours le support de niveau comme support
Afstandsbediening om te gebruiken met de Air Flux Cyclone Stofafzuigingen Air Flux 2000CKH en Air Flux 3000CKH.
Extensions for the wheel kit WK600. Use the two bars (length: 915mm) to replace the original ones from your wheel kit. Transport larger machines without loss of carrying capacity.
Promo package saw table BELMASH TSB-2000
cutting capacity of 0 - 70 mm BELMASH TSB-2000 is powered by a powerful 2.7 HP induction motor.
This mortiser with 16 mm Westcott chuck is available as an option with the combination machine TT32K5SL.
Content
Fraise en carbure de tungstène avec un angle de 15°. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW. Le chanfrein peut être ajusté en changeant la hauteur de l'embout. Facile à utiliser en utilisant le roulement à billes comme guide.
Portable edge bander PEB250+ mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The automatic rollers and feed with guide system ensure that the edgebanding always lands correctly on your panel. The height and thickness of the edge band is very easy to adjust using the millimetre control. Finally, the machine also has an adjustable glue dosage so that you always use the right quantity for your workpiece.
With the portable edge bander PEB250+ both the speed of the rollers and the temperature can be controlled. This makes the PEB250+ very suitable to work on moulded panels. The speed control allows you to always use the correct speed in function of the work. This ability offers greater working comfort on moulded panels. The table is equipped with a holder for rolls and an automatic end trimmer. The edge bander can be easily removed from the table for mobile work. In that case you must use pre-cut edge bands.
Patented glue pot
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain. This also means that you can use other colored adhesives quickly and without any problems. No additional adjustments are required to change the glue between two projects, even if it's differently colored. The adhesive rollers have been polymerised to prevent damage to your edge bands.
Verloopstuk voor de verschillende modellen stofafzuiging van Air Flux. Af te snijden op de correcte diameter.
Anti-slip voetje voor gebruik op de PIHER klemmen Mod. POT.
Gemaakt uit staal.
Sanding belt for sander TT2010.
2010 x 152 mm
Available in grit 60 - 80 - 100 - 150
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Met deze pad maak je jou Piher PRL95 klem weer als nieuw.
De pad klik je gewoon op de klem wanneer de originele pad te beschadigd geworden is.
De GuidePRO is een makkelijk te installeren geleider die als hulp dient bij het zagen. Eindelijk een baanbrekende innovatie die het gemakkelijk en veiliger maakt om kwaliteit en precisie te zagen op een lintzaag of freesmachine. Drie eenvoudige stappen voor een nauwkeurige en snelle installatie, keer op keer. Mitre Cam schuift in de verstekgleuf en zwenkt gemakkelijk op zijn plaats voor bevestiging.
Er is geen andere tool zoals deze!
DURONYL nylon brush for texturing wooden surfaces. The characteristic wood structure is brought to the fore by working with the brush. The brushes mainly remove the softer wood of the more recent annual rings and leave the harder wood of the older annual rings intact. Brushed wooden surfaces are used, among other things, in the manufacture of rustic furniture, the furnishing of rustic cafés and restaurants (wall and ceiling coverings) or for beams.
Pièce de réduction à utiliser avec les modèles differents des aspirateurs Air Flux. A couper sur le propre diamètre.
SOLDES
Avec ce coupeur de stratifié, vous pouvez facilement couper le stratifié à la bonne longueur.
Une coupe nette en 2 étapes simples :
Placez la pièce sous la lame et appuyez-la contre la butée.
Appuyez sur le levier en un seul mouvement.
Utilisez toujours le support de niveau comme support
Afstandsbediening om te gebruiken met de Air Flux Cyclone Stofafzuigingen Air Flux 2000CKH en Air Flux 3000CKH
Extensions for the wheel kit WK600. Use the two bars (length: 915mm) to replace the original ones from your wheel kit. Transport larger machines without loss of carrying capacity.
Promotional package for the compact and portable saw table. The TSB-2000 promo package is composed of: Saw blade 250x30x 40Z, saw blade 250x30x 60Z, Air Flux AF 1100/45, 2 Meter clearview 100mm, clamping bands 2x and Multi adaptor 3DU1004. The machine is powered by a powerful 2.7 HP induction motor.
This 250 x 370 mm mortiser with a 16 mm Westcott chuck is available as an option with the combination machine TT32K5SL.
Weight
0,05 kg
30 kg
0,5 kg
0,03 kg
0,05 kg
1 kg
0,02 kg
2 kg
0,3 kg
0,5 kg
2 kg
0,5 kg
5 kg
110 kg
25 kg
Dimensions
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
Additional information
Poids
0,05 kg
Diamètre
19mm
Longeur de coupe
10mm
Longueur
49mm
Angle
15°
Queue
8mm
Faces de coupe
3
Poids
30 kg
Puissance
830W
Inhoud lijmbak
230cm³
Temperatuur (regelbaar)
120 – 200°C
Werksnelheid (regelbaar)
2-6m/min
Min-Max. hoogte band
10-62mm
Min-Max. dikte band
0.4-3mm
Poids
0,5 kg
Poids
0,03 kg
Poids
0,05 kg
Grain
K60, K80, K100, 150
Poids
1 kg
Diamètre lame de scie
600mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
2,8mm
nombre de dents
56
Poids
0,02 kg
Poids
2 kg
Poids
0,3 kg
Grain
K60, K80, K46
Diamètre
∅120 x 100
Poids
0,5 kg
Poids
2 kg
Poids
0,5 kg
Poids
5 kg
Poids
110 kg
Poids
25 kg
Mandrin
16 mm
Boortafel
250 x 370 mm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy