Les fraises Klein® à coupe droite conviennent aux chants lisses et bien finis des panneaux de mélamine et de placage. Le roulement, ayant le même diamètre que les fraises, coupe tout chevauchement en laissant un bord plat et lisse. Deux faces de coupe assurent une coupe rapide et une bonne éjection des copeaux.
Adapter 1209
The EB58K table is mobile, height-adjustable (with four fixed positions) and foldable for easy storage. The table provides a stable and solid base for attaching and transporting machines. The table can be moved or adjusted in height while the machine is attached. As a result, you do not have to constantly assemble or disassemble the machine. Adjusting the height is easy. Operate with your foot at the bottom of the height adjustment, then use the lever to secure it in the correct position. The maximum load-bearing capacity of the table is 100kg. Thanks to its small size, this table is ideal for use on location. To be used with PEB200TRC/PEB250TRC, PEB250TA and PEB250TRM.
Set of reducing bushes to widen the bore of your spindle moulder machine. Thanks to this handy accessory you will be able to use cutter heads with a larger diameter on your own spindle machine of bore 30mm. Available with Ø40mm or Ø50mm for use on cutter heads with 40mm or 50mm bore.
Using this easy upgrade you are able to elavate the filtration of your Air Flux Dust Extractor up to 30 times, significantly improving the air quality in your workshop. The high quality folded filter catches dust and finer particles down to 1µm, compared to 30µm for the standard filter and 5µm for the fibre filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove all dust piled up in the folds of the filter, the dust will fall down in the PVC waste bags below.
Adapter 1218
Rocco-kop M33 3-1/2", verchroomd, met handige carrésleutel en voorzien van indexplaat en schroefmeenemer.
Set profielmessen hoogte 40mm Nr. 0046 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0044 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
La table à vide SFV50 est adaptée pour une fixation solide et rapide du panneau. Grâce aux ventouses, ce support est idéal pour tous les matériaux lisses et non poreux. Deux serres-joints sont inclus en standard pour fixer le support. La table est un moyen efficace et convivial de tenir le panneau et de travailler confortablement sur les bords. Pour les pièces de grande taille, il est recommandé d'utiliser plusieurs supports. Le support peut être placé à la fois horizontalement et verticalement. Egalement disponible avec une simple ventouse comme SFV150.
La table coulissante ITAMAC ST1400 peut être facilement installée sur la plupart des tables de scie, fraiseuses, etc. pour augmenter considérablement la capacité. Ce bel ajout à votre table de scie comprend un guide télescopique avec une butée réglable et un système coulissant industriel avec un mécanisme de guidage linéaire pour des résultats extrêmement précis. En utilisant l'extension, vous pouvez scier des pièces jusqu'à 1220 mm. Le guide facilement positionné peut également être incliné à 45 ° à l'aide de la jauge à onglets intégrée.
This large disc sander (Ø173mm) is specially designed for polishing metal sheet metal or marble. By means of a powerful motor (700W), this sander will not lose power even during prolonged use. The ergonomic design ensures a perfect grip and comfortable working. The well-placed handles and non-slip surfaces give you excellent grip and control at all times. Standard equipped with a rubber disc and a sanding disc. Equipped with electronic speed control.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. The smaller bearing provides an upright standing side to the rounding. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Set de couteaux profilés hauteur 50mm Nr. 2067 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
The Kreg Pocket-Hole Jig 320 is a complete basic set for pocket-hole connections. The drill jig features two drill guides, a removable spacer and convenient material thickness stops. The included material thickness gauge and EasySet drill bit make installation extremely easy, while the convenient clamp adapter and non-slip base keep the jig precisely positioned as you drill perfectly positioned pocket holes every time. The jig and included components come in a durable, compact case that even has room to store Kreg pocket screws. The drill guides are made of hardened steel with a lifetime warranty.
Zaaglint met lengte 4670mm om te gebruiken op de TT50BS of TT61BS lintzaagmachine van Tendotools. Dit zaaglint beschikt over 14 TPI (tanden per inch) en heeft een breedte van 27mm. Dit bimetaal zaaglint is erg sterk en is naast hout of kunststoffen zelfs geschikt om lichte metaallegeringen of bijvoorbeeld aluminium te verzagen. Het is ook aan te raden deze zaaglinten te gebruiken bij langdurig gebruik op harde houtsoorten.
Set de couteaux profilés hauteur 50mm Nr. 2064 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Set profielmessen hoogte 40mm Nr. 0086 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Cette table à vide électrique sur pied basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. Pour que la table soit à vide, elle doit être connectée au système de fixation électrique à vide SVE600 de Virutex (inclus en standard). La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. Le support doit être fixé à l'aide de pinces (non comprises). Ce support est spécialement conçu pour se connecter au modèle SVE660 ou SVE670. Pas de connexion directe au système de fixation électrique de vide SVE600 comme le modèle SVE660 ou SVE670.
Set profielmessen hoogte 50mm Nr. 2076 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Light and powerful sander for sanding all types of surfaces. The ergonomic design ensures a perfect grip and comfortable working. Thanks to the perfect balancing, you can enjoy a reduced vibration level. Equipped with a large polyurethane sanding base (93x185mm). Because of these dimensions, the sanding base prevents the metal parts from damaging corners or edges during accurate work. On the other hand, the sanding surface is still perfectly suitable for sanding narrow surfaces, e.g. between mouldings. Equipped with an integrated dust extractor and dust bag.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Grâce au face de coupe supplémentaire en bout de fraise (Z=2+1), c'est aussi possible de facilement faire de perçage.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
The teeth of this saw blade were grinded into a V-shape (45°) in order to easily make grooves on your boarding panels. On demand the teeth can be filed down under different angles/into different shapes or with different thickness.
Grooving saw blade with flat (FZ) tungsten teeth to be used for cutting grooves in hardwood, softwood, timber wood, and plastic coated panel. The sawing blades have a bore of 30mm and are ideally suited for use on all spindle moulding machines or sawing tables.
Floor piece with outlet diameter 100mm to be used with the Air Flux dust extractors. Attach the piece to the floor and simply wipe dust and shavings into the opening to suck it all up.
Set profielmessen hoogte 40mm Nr. 0000 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw blade with 56 teeth
Wolf tooth saw blade for classic machines, suitable for fast cutting of different types of wood, wet wood or brush wood. To be used on yard or construction machinery but mainly suitable for firewood saws. The entire saw blade is finished in high quality Chrome-vanadium steel. Made in Germany, take advantage of the extremely solid German quality. Easy to sharpen yourself.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Content
Les fraises Klein® à coupe droite conviennent aux chants lisses et bien finis des panneaux de mélamine et de placage. Le roulement, ayant le même diamètre que les fraises, coupe tout chevauchement en laissant un bord plat et lisse. Deux faces de coupe assurent une coupe rapide et une bonne éjection des copeaux.
Adapter 1209
The EB58K table is mobile, height-adjustable (with four fixed positions) and foldable for easy storage. The table provides a stable and solid base for attaching and transporting machines. The table can be moved or adjusted in height while the machine is attached. As a result, you do not have to constantly assemble or disassemble the machine. Adjusting the height is easy. Operate with your foot at the bottom of the height adjustment, then use the lever to secure it in the correct position. The maximum load-bearing capacity of the table is 100kg. Thanks to its small size, this table is ideal for use on location. To be used with PEB200TRC/PEB250TRC, PEB250TA and PEB250TRM.
Set of reducing bushes to widen the bore of your spindle moulder machine. Thanks to this handy accessory you will be able to use cutter heads with a larger diameter on your own spindle machine of bore 30mm. Available with Ø40mm or Ø50mm for use on cutter heads with 40mm or 50mm bore.
Using this easy upgrade you are able to elavate the filtration of your Air Flux Dust Extractor up to 30 times, significantly improving the air quality in your workshop. The high quality folded filter catches dust and finer particles down to 1µm, compared to 30µm for the standard filter and 5µm for the fibre filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove all dust piled up in the folds of the filter, the dust will fall down in the PVC waste bags below.
Adapter 1218
Verchroomd, met handige carrésleutel.
De klauwen zijn aan de binnen- en buitenkant voorzien van hechtgroeven.
Voorzien van indexplaat en schroefmeenemer.
Set profielmessen hoogte 40mm Nr. 0046 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0044 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
La table à vide SFV50 est adaptée pour une fixation solide et rapide du panneau. Grâce aux ventouses, ce support est idéal pour tous les matériaux lisses et non poreux. Deux serres-joints sont inclus en standard pour fixer le support. La table est un moyen efficace et convivial de tenir le panneau et de travailler confortablement sur les bords. Pour les pièces de grande taille, il est recommandé d'utiliser plusieurs supports. Le support peut être placé à la fois horizontalement et verticalement. Egalement disponible avec une simple ventouse comme SFV150.
La table coulissante ITAMAC ST1400 peut être facilement installée sur la plupart des tables de scie, fraiseuses, etc. pour augmenter considérablement la capacité. Ce bel ajout à votre table de scie comprend un guide télescopique avec une butée réglable et un système coulissant industriel avec un mécanisme de guidage linéaire pour des résultats extrêmement précis. En utilisant l'extension, vous pouvez scier des pièces jusqu'à 1220 mm. Le guide facilement positionné peut également être incliné à 45 ° à l'aide de la jauge à onglets intégrée.
This large disc sander (Ø173mm) is specially designed for polishing metal sheet metal or marble. By means of a powerful motor (700W), this sander will not lose power even during prolonged use. The ergonomic design ensures a perfect grip and comfortable working. The well-placed handles and non-slip surfaces give you excellent grip and control at all times. Standard equipped with a rubber disc and a sanding disc. Equipped with electronic speed control.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. The smaller bearing provides an upright standing side to the rounding. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Set de couteaux profilés hauteur 50mm Nr. 2067 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
The Kreg Pocket-Hole Jig 320 is a complete basic set for pocket-hole connections. The Kreg Pocket-Hole Jig 320 makes it easier than ever to build wood projects - whether you're building your first DIY project or have been working with wood for years. The Pocket-Hole Jig 320 uses a simple, easy-to-understand installation process that gives you the versatility you need to build with boards and plywood of any thickness between +/- 12 mm and +/- 38 mm.
The 320 features two drill guides, a removable spacer and convenient material thickness stops. The included material thickness gauge and EasySet drill bit make installation extremely easy, while the convenient clamp adapter and non-slip base keep the jig precisely positioned as you drill perfectly positioned pocket holes every time. The jig and included components come in a durable, compact case that even has room to store Kreg pocket screws. The drill guides are made of hardened steel with a lifetime warranty.
Some other improvements:
'Twist-apart' design - drill guides and spacer ring rotate and lock in place for easy hole spacing.
'EasySet' drill bit - engraved bit markings and depth stop with viewing window simplify bit configuration.
Clamp adapter - convenient attachment for easy and fast clamping with clamps from Kreg and other brands.
Material thickness gauge/allen key - helps to set the correct depth of the drill bit, also works as an allen key.
The Pocket-Hole Jig 320 comes with two drill jigs, a spacer, a step drill with drill stop, a clamp adapter, a material thickness gauge, a screw bit, a Kreg 32 mm screw set, a Kreg Blue Kote 64 mm screw set and an instruction manual. Everything is delivered in one carrying case.
Zaaglint met lengte 4670mm om te gebruiken op de TT50BS of TT61BS lintzaagmachine van Tendotools. Dit zaaglint beschikt over 14 TPI (tanden per inch) en heeft een breedte van 27mm. Dit bimetaal zaaglint is erg sterk en is naast hout of kunststoffen zelfs geschikt om lichte metaallegeringen of bijvoorbeeld aluminium te verzagen. Het is ook aan te raden deze zaaglinten te gebruiken bij langdurig gebruik op harde houtsoorten.
Set de couteaux profilés hauteur 50mm Nr. 2064 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Set profielmessen hoogte 40mm Nr. 0086 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Cette table à vide électrique sur pied basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. Pour que la table soit à vide, elle doit être connectée au système de fixation électrique à vide SVE600 de Virutex (inclus en standard). La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. Le support doit être fixé à l'aide de pinces (non comprises). Ce support est spécialement conçu pour se connecter au modèle SVE660 ou SVE670. Pas de connexion directe au système de fixation électrique de vide SVE600 comme le modèle SVE660 ou SVE670.
Set profielmessen hoogte 50mm Nr. 2076 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Light and powerful sander for sanding all types of surfaces. The ergonomic design ensures a perfect grip and comfortable working. Thanks to the perfect balancing, you can enjoy a reduced vibration level. Equipped with a large polyurethane sanding base (93x185mm). Because of these dimensions, the sanding base prevents the metal parts from damaging corners or edges during accurate work. On the other hand, the sanding surface is still perfectly suitable for sanding narrow surfaces, e.g. between mouldings. Equipped with an integrated dust extractor and dust bag.
Optionally, a base plate with Velcro is available.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Grâce au face de coupe supplémentaire en bout de fraise (Z=2+1), c'est aussi possible de facilement faire de perçage. Le fraise est réalisé complètement en métal dure (carbide) et a une finition spéciale 'micrograin' pour des prestations améliorés. Grâce à tous ces qualités, le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
The teeth of this saw blade were grinded into a V-shape (45°) in order to easily make grooves on your boarding panels. On demand the teeth can be filed down under different angles/into different shapes or with different thickness.
Grooving saw blade with flat (FZ) tungsten teeth to be used for cutting grooves in hardwood, softwood, timber wood, and plastic coated panel. The sawing blades have a bore of 30mm and are ideally suited for use on all spindle moulding machines or sawing tables.
Floor piece with outlet diameter 100mm to be used with the Air Flux dust extractors. Attach the piece to the floor and simply wipe dust and shavings into the opening to suck it all up.
Set profielmessen hoogte 40mm Nr. 0000 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw blade with 56 teeth
Wolf tooth saw blade for classic machines, suitable for fast cutting of different types of wood, wet wood or brush wood. To be used on yard or construction machinery but mainly suitable for firewood saws. The entire saw blade is finished in high quality Chrome-vanadium steel. Made in Germany, take advantage of the extremely solid German quality. Easy to sharpen yourself.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Weight
0,05 kg
0,05 kg
5 kg
0,5 kg
11 kg
0,05 kg
ND
0,05 kg
0,05 kg
2 kg
42 kg
3 kg
0,05 kg
0,05 kg
1 kg
0,5 kg
0,05 kg
0,05 kg
1 kg
0,05 kg
1,5 kg
0,05 kg
0,05 kg
1 kg
0,5 kg
0,05 kg
1 kg
0,05 kg
Dimensions
ND
ND
ND
ND
53 × 53 × 65 cm
ND
ND
0,4 cm
0,4 cm
ND
130 × 45 × 40 cm
ND
ND
0,5 cm
ND
ND
0,5 cm
0,4 cm
ND
0,5 cm
ND
ND
ND
ND
ND
0,4 cm
ND
ND
Additional information
Poids
0,05 kg
Diamètre
12,7mm
Longeur de coupe
13mm
Longueur
54mm
Faces de coupe
2
Poids
0,05 kg
Poids
5 kg
Draagkracht
100kg
Tafel afmetingen
840x350mm
Hoogtes tafel
383mm, 621mm, 734mm, 810mm
Poids
0,5 kg
Diamètre
40mm, 50mm
Diamètre de l\' arbre
30 mm
Poids
11 kg
Dimensions
53 × 53 × 65 cm
Poids
0,05 kg
Filetage
M33
Ouverture maximale
889 mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
2 kg
Poids
42 kg
Dimensions
130 × 45 × 40 cm
Poids
3 kg
Schuurdiameter
173mm
Nominale snelheid
2000-3800rpm
Poids
0,05 kg
Diamètre
22,7mm
Longeur de coupe
12mm
Longueur
51mm
Rayon
R5
Queue
8mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,5 cm
Poids
1 kg
Poids
0,5 kg
Longueur
4670mm
Largeur
27mm
Dikte
0,90mm
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1 kg
Puissance
95W
Dimensions de la surface de travail
150x150mm
Pression de vide
750mbar
Poids
0,05 kg
Dimensions
0,5 cm
Poids
1,5 kg
Puissance
180W
Schuuroppervlakte
93x185mm
Ø Rotatie
2mm
Nominale snelheid
12500rpm
Vibrations
25000/min
Poids
0,05 kg
Diamètre
3mm
Longeur de coupe
11mm
Longueur
51mm
Faces de coupe
2+1
Poids
0,05 kg
Diamètre
16mm
Longeur de coupe
8mm
Longueur
46mm
Rayon
R1,6
Queue
8mm
Faces de coupe
2
Poids
1 kg
Diamètre lame de scie
125mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
6,0mm
Epaisseur lame de scie
4,0mm
nombre de dents
12
Forme de dent
Denture V
Poids
0,5 kg
Diamètre
100mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1 kg
Diamètre lame de scie
350mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
1,8mm
nombre de dents
56
Poids
0,05 kg
Diamètre
25,4mm
Longeur de coupe
13mm
Longueur
51mm
Rayon
R6,4
Queue
8mm
Faces de coupe
2
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy