| Description | Les fraises Klein® à coupe droite conviennent aux chants lisses et bien finis des panneaux de mélamine et de placage. Le roulement, ayant le même diamètre que les fraises, coupe tout chevauchement en laissant un bord plat et lisse. Deux faces de coupe assurent une coupe rapide et une bonne éjection des copeaux. Les lames sont spécialement cisaillées pour que vous puissiez travailler plus rapidement et sans éclats. | The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).
The Kreg 720 Pro comes with a Docking Station. This extension provides more support for larger equipment and more storage space. The side pieces of the Docking Station can be easily folded to store the system when not in use. In addition, the side pieces can also be disconnected from the system so that you can create even more support for your workpiece.
You can measure the thickness of the material with the supplied material thickness gauge. At the bottom of the Kreg 720 is a built-in storage system for the drill, driver bits and material thickness gauge. | |
| Content | Les fraises Klein® à coupe droite conviennent aux chants lisses et bien finis des panneaux de mélamine et de placage. Le roulement, ayant le même diamètre que les fraises, coupe tout chevauchement en laissant un bord plat et lisse. Deux faces de coupe assurent une coupe rapide et une bonne éjection des copeaux. Les lames sont spécialement cisaillées pour que vous puissiez travailler plus rapidement et sans éclats. | The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).
The Kreg 720 Pro comes with a Docking Station. This extension provides more support for larger equipment and more storage space. The side pieces of the Docking Station can be easily folded to store the system when not in use. In addition, the side pieces can also be disconnected from the system so that you can create even more support for your workpiece.
With the supplied material stop you make repetitive work even easier. You simply slide the stop onto the side piece of the Docking Station and this creates extra stability for your workpiece. The material stopper can be stored in the Docking Station after use.
The included steel Pocket-Hole Jig clamp is ideal for clamping your connection system to your work surface. This makes it a complete and professional connection system for your workbench. The clamp is also easy to store in the Docking Station after use.
Setting up the Kreg Jig 720 Pro is quick and easy. You simply put your material in the jig and push the handle down. The system then does all the work for you and adjusts to the correct thickness. The handle also gives you full control over the clamping force! In addition, the system has anti-slip material. This will hold your workpiece securely in place without marking your wood.
You can measure the thickness of the material with the supplied material thickness gauge. The following sizes are indicated on it: 1/2”, 3/4” and 1 1/2” (13, 19 and 38 mm). These measurements correspond to the measurements on the step drill. You tighten the drill stop to the correct size with the material thickness gauge which is also an Allen key.
At the bottom of the Kreg 720 Pro is a built-in storage system for the drill, screw bits and the material thickness gauge. Next to the storage space, the dimensions are shown, with several intermediate steps. This allows you to set the stop collar even more precisely on the drill bit.
The Kreg 720 Pro connection system also comes with an extraction piece that can be attached to the left and right of the drilling jig. An extraction hose can then be connected to this. In this way, dust and wood chips are sucked out of the way and you continue to have a good view of your work surface. This makes making pocket holes a lot more efficient.
The Kreg connection system can be used horizontally and vertically. This way you can make pocket holes however you want.
As you are used to from Kreg, this system is also built on durability. Thanks to the shock-resistant and durable plastic construction with a hardened steel core, you can rest assured that the system will last.
The 720 Pro comes with a whopping 160 Pocket-Hole screws in the two most popular sizes. You will also receive a project plan. So you can get started right away! | |
