Cette fraise à percer et affleurer peut être utiliser pour facilement percer et couper des ouvertures dans les plans de travail laminés. Le point 'V' peut facilement percer la couche supérieure des stratifiés. Le face à couper en carbide vous donne une finition parfait pour tous votre projets. La base de la fraise agit comme un guide suiveur.
DEMO MODEL
The Airflux Dusty AF-5000-3 is a compact dust collector with strong air flow, high capacity and low noise levels. Thanks to these qualities the Dusty AF-5000-3 is ideally suited to be used in small workshops. The powerful, 5.5HP motor guarantees a high and constant air flow, even after prolonged time of use. The patented, curved blade impeller further heigthens the air flow capacity.
SHOWROOM MODEL, old colours 2022
The Air Flux3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Le Kreg Pocket-Hole Jig 720 et le Kreg Pocket-Hole Jig 720 Pro sont compatibles avec le gabarit de perçage de chevilles Kreg KPHA740. Avec ce foret à cheville, vous pouvez percer vos propres chevilles en fonction de votre projet.
Vous pouvez ainsi vous assurer que le type de bois, la couleur du bois et la direction des fibres correspondent tous à votre pièce. En un rien de temps, vous ferez des joints de bois qui ne seront plus visibles !
SHOWROOM MODEL
The TT305SLX is the largest pull-function mitre saw on the market. It is equipped with a silent 1600 W induction motor that requires no maintenance (which is a big advantage over the carbon brush motor in the smaller models) and has a pull function of up to 350 mm, with a cutting height of up to 107 mm. The saw can be tilted up to 48° in 2 directions.
Set profielmessen hoogte 40mm Nr. 0001 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0015 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 50mm Nr. 2066 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
SALES
With this laminate cutter, you can easily cut laminate to the right length.
Clean cut in 2 simple steps:
Place the workpiece under the blade and press it against the stop.
Press the lever down in one movement.
Always use level carrier as support
Sortie optionelle 2x Ø125mm pour utilisation avec Air Flux Cyclone. Le grand diamètre est de 203mm, directement connectable aux groupes d'extraction du cyclone Air Flux, avec des branches 2x125mm.
This wheelbase from Belmash is compatible with the Universal 2000, SDM2500, SDMR2500 and SDR2200 machines. Place your Belmash machine at an ideal height and make it mobile.
Content
Cette fraise à percer et affleurer peut être utiliser pour facilement percer et couper des ouvertures dans les plans de travail laminés. Le point 'V' peut facilement percer la couche supérieure des stratifiés. Le face à couper en carbide vous donne une finition parfait pour tous votre projets. La base de la fraise agit comme un guide suiveur.
The Airflux Dusty AF-5000-3 is a compact dust collector with strong air flow, high capacity and low noise levels. Thanks to these qualities the Dusty AF-5000-3 is ideally suited to be used in small workshops. The powerful, 5.5HP motor guarantees a high and constant air flow, even after prolonged time of use. The patented, curved blade impeller further heigthens the air flow capacity.
The Air Flux 3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Le Kreg Pocket-Hole Jig 720 et le Kreg Pocket-Hole Jig 720 Pro sont compatibles avec le gabarit de perçage de chevilles Kreg KPHA740. Avec ce foret à cheville, vous pouvez percer vos propres chevilles en fonction de votre projet.
Il est facile d'utiliser le gabarit de perçage de chevilles. Il suffit de placer le gabarit de perçage de chevilles en position après avoir retiré le gabarit de perçage original du gabarit 720. Il suffit ensuite de placer votre matériau (restant) dans le gabarit et d'abaisser le levier. Vous êtes prêt à percer vos propres chevilles une fois que vous avez vissé la butée de perçage sur le foret à chevilles à l'aide de la clé Allen.
Vous pouvez rapidement fabriquer des chevilles à partir du bois restant dans votre projet en utilisant le gabarit de cheville Kreg. Vous pouvez ainsi vous assurer que le type de bois, la couleur du bois et la direction des fibres correspondent tous à votre pièce. En un rien de temps, vous ferez des joints de bois qui ne seront plus visibles ! Ce gabarit de perçage de chevilles Kreg produit des chevilles ayant les mêmes dimensions que les trous de poche du gabarit de perçage de trous de poche 720 et 720 Pro. Après le perçage, les chevilles sont faciles à scier à la main ou avec une scie à ruban, par exemple.
The TT305SLX is the largest pull-function mitre saw on the market. It is equipped with a silent 1600 W induction motor that requires no maintenance (which is a big advantage over the carbon brush motor in the smaller models) and has a pull function of up to 350 mm, with a cutting height of up to 107 mm.
The use of ball bearings on all joints ensures precise rotation of the table, head and tilting system. The saw has a die-cast aluminum body and can be tilted up to 48° in 2 directions. The silent, maintenance-free 1600 W induction motor with belt drive delivers high torque and is positioned at the rear, giving the saw a large cutting height (up to 107 mm). The saw blade has a diameter of 305 mm and 60 teeth. The side supports are extendable.
The TT305SLX is further equipped with a horizontal D handle.
Set profielmessen hoogte 40mm Nr. 0001 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0015 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 50mm Nr. 2066 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
SALES
With this laminate cutter, you can easily cut laminate to the right length.
Clean cut in 2 simple steps:
Place the workpiece under the blade and press it against the stop.
Press the lever down in one movement.
Always use level carrier as support
Sortie optionelle 2x Ø125mm pour utilisation avec Air Flux Cyclone. Le grand diamètre est de 203mm, directement connectable aux groupes d'extraction du cyclone Air Flux, avec des branches 2x125mm.
This wheelbase from Belmash is compatible with the Universal 2000, SDM2500, SDMR2500 and SDR2200 machines. Place your Belmash machine at an ideal height and make it mobile.
Weight
0,05 kg
140 kg
300 kg
0,5 kg
34 kg
0,05 kg
0,05 kg
0,05 kg
2 kg
2 kg
7 kg
Dimensions
ND
170 × 60 × 230 cm
730 × 1730 × 2280 cm
ND
580 × 890 × 540 cm
0,4 cm
0,4 cm
0,5 cm
ND
ND
ND
Additional information
Poids
0,05 kg
Diamètre
6,4mm
Longeur de coupe
19mm
Longueur
63mm
Faces de coupe
1+1
Poids
140 kg
Dimensions
170 × 60 × 230 cm
Moteur
5.5 CV
Voltage
3 x 400V
Sortie
180mm – 4x100mm
Air Speed
4600m³/h
Ventilateur
345mm
Niveau sonore
80dB
Sac à filtrer
500x850mm
Sac
500x850mm
Poids
300 kg
Dimensions
730 × 1730 × 2280 cm
Puissance
4PK
aantal filters
15
Filter afmetingen
160 x 1030 mm
filtratie oppervlakte
7.75 m2
afvalopslag
metal container (60x60x72cm)
capaciteit
3500m3
Poids
0,5 kg
Poids
34 kg
Dimensions
580 × 890 × 540 cm
Epaisseur de coupe maximale
107 mm
Puissance
1600 W
Coupe 0° x 0°
350 x 107 mm
Coupe 0° x 45°
240 x 94 mm
Coupe 45° x 0°
350 x 70 mm
Coupe 45° x 45°
240 x 70 mm, 55 x 55 mm
Diamètre lame de scie
305mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Dimensions
0,5 cm
Poids
2 kg
Poids
2 kg
Poids
7 kg
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy