| Description | Les fraises Klein® à coupe droite conviennent aux chants lisses et bien finis des panneaux de mélamine et de placage. Le roulement, ayant le même diamètre que les fraises, coupe tout chevauchement en laissant un bord plat et lisse. Deux faces de coupe assurent une coupe rapide et une bonne éjection des copeaux. Les lames sont spécialement cisaillées pour que vous puissiez travailler plus rapidement et sans éclats. | Cutter head in light metal with knives in high quality tungsten carbide (HW) for jointing. Thanks to the tungsten carbide blades, this grooving cutter cuts effortlessly through solid boards or solid woods. Simply mill one side of the workpiece. Then turn the wood over and mill again. Both parts fit together perfectly and thanks to the larger contact surface you obtain a stronger adhesive bond. To be used on wood of thickness between 20mm and 48mm.
Available with bore 30mm or 50mm. This cutter has been specifically developed for the along the grain joints. For across the grain joints it is recommended to use art. ST-YH156AAM. | Kreg zinken pocket-holeschroeven met een vierkante aansluiting. De schroef heeft een lengte van 25 mm (1") en een grove draad, wat haar uitermate geschikt maakt voor zachthout. | Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. | Lame de scie avec 60 dents
Lame de scie avec denture alternée, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Peut également être utilisé pour le sciage de panneaux d'aggloméré ou de bois collé sur une face. Idéal pour les scies de chantier ou les scies circulaires à chevalet. Made in Germany, profitez de la solide qualité allemande. | The Kreg® Pocket-Hole Jig 310 makes woodworking a breeze, whether you are starting your first DIY project or have been working with wood for years. The Pocket-Hole Jig 310 has a simple, easy-to-understand adjustment system, allowing you to work with boards and plywood from 13 to 38 mm thick. With a drill guide made of hardened steel and a convenient material thickness stop. | Rocco-kop M33 3-1/2", verchroomd, met handige carrésleutel en voorzien van indexplaat en schroefmeenemer. | Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines. | Set reduceerringen om uw freesas te verbreden. Gebruik dankzij deze handige ringen freesgereedschap met een grotere diameter ook op uw freesmachine met as 30mm. Verkrijgbaar met Ø40mm of Ø50mm om te gebruiken op freesgereedschap met asgat 40mm of 50mm. | This Virutex electric hand planer combines high power (700W) with light weight. The ideal combination for high quality planing, both inside and outside the workshop. Easy to handle and carry. The specially treated sliding base is designed to achieve perfect planing. The CE35E planer is fitted as standard with replaceable blades in high quality carbide (widia). The machine does not require adjustments when the blades are changed. The shavings are ejected through the exhaust on the right side.
Standard delivery with reversible blade in high quality carbide (widia). Optionally available: a handy PVC case, a guide to work even more precisely, a base for stationary use of the CE35E.
|
| Content | Les fraises Klein® à coupe droite conviennent aux chants lisses et bien finis des panneaux de mélamine et de placage. Le roulement, ayant le même diamètre que les fraises, coupe tout chevauchement en laissant un bord plat et lisse. Deux faces de coupe assurent une coupe rapide et une bonne éjection des copeaux. Les lames sont spécialement cisaillées pour que vous puissiez travailler plus rapidement et sans éclats. | Cutter head in light metal with knives in high quality tungsten carbide (HW) for jointing. Thanks to the tungsten carbide blades, this grooving cutter cuts effortlessly through solid boards or solid woods. Simply mill one side of the workpiece. Then turn the wood over and mill again. Both parts fit together perfectly and thanks to the larger contact surface you obtain a stronger adhesive bond. To be used on wood of thickness between 20mm and 48mm.
Available with bore 30mm or 50mm. This cutter has been specifically developed for the along the grain joints. For across the grain joints it is recommended to use art. ST-YH156AAM. | Kreg pocket-holeschroeven met een vierkante aansluiting. De schroef heeft een lengte van 25 mm (1") en een grove draad, wat haar uitermate geschikt maakt voor zachthout, en is vervaardigd uit zink. Zink biedt voldoende bescherming tegen roest en is een betaalbaar alternatief voor de Blue-Kote en roestvrijstalen varianten.
Deze schroef is verkrijgbaar in verpakkingen van 100, 500 en 1200 stuks. | Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. | Lame de scie avec 60 dents
Lame de scie avec denture alternée, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Peut également être utilisé pour le sciage de panneaux d'aggloméré ou de bois collé sur une face. Idéal pour les scies de chantier ou les scies circulaires à chevalet. Made in Germany, profitez de la solide qualité allemande. | The Kreg® Pocket-Hole Jig 310 makes woodworking a breeze, whether you are starting your first DIY project or have been working with wood for years. The Pocket-Hole Jig 310 has a simple, easy-to-understand adjustment system, allowing you to work with boards and plywood from 13 to 38 mm thick. With a drill guide made of hardened steel and a convenient material thickness stop.
The included material thickness gauge and Easyset drill bit make setting up the jig a snap, and the GripMaxx™ anti-slip foot holds the jig firmly in place, allowing you to drill perfectly placed pocket holes time after time. With its durable construction and lifetime warranty on the drill guide, the Kreg® Pocket-Hole Jig 310 is guaranteed to give you years of enjoyment. Exactly as you would expect from Kreg®, the leading brand for pocket hole tools. | Verchroomd, met handige carrésleutel.
De klauwen zijn aan de binnen- en buitenkant voorzien van hechtgroeven.
Voorzien van indexplaat en schroefmeenemer. | Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines. | Set reduceerringen om uw freesas te verbreden. Gebruik dankzij deze handige ringen freesgereedschap met een grotere diameter ook op uw freesmachine met as 30mm. Verkrijgbaar met Ø40mm of Ø50mm om te gebruiken op freesgereedschap met asgat 40mm of 50mm. | This Virutex electric hand planer combines high power (700W) with light weight. The ideal combination for high quality planing, both inside and outside the workshop. Easy to handle and carry. The specially treated sliding base is designed to achieve perfect planing. The CE35E planer is fitted as standard with replaceable blades in high quality carbide (widia). The machine does not require adjustments when the blades are changed. The shavings are ejected through the exhaust on the right side.
Standard delivery with reversible blade in high quality carbide (widia). Optionally available: a handy PVC case, a guide to work even more precisely, a base for stationary use of the CE35E.
|
| Additional information |
| Poids |
0,05 kg |
| Diamètre |
16mm
|
| Longeur de coupe |
16mm
|
| Longueur |
56mm
|
| Faces de coupe |
2
|
|
| Poids |
1 kg |
| Diamètre |
125mm
|
| Diamètre de l\' arbre |
30 mm, 50 mm
|
| Faces de coupe |
2
|
| Hauteur de rainure |
50mm
|
| RPM Min-Max |
6100-10600
|
|
| Poids |
0,25 kg |
| Stuks in verpakking |
100, 500, 1200
|
| Longueur |
25mm
|
| Materiaal |
Zink
|
|
| Poids |
0,05 kg |
| Diamètre |
12,7mm
|
| Longeur de coupe |
25mm
|
| Longueur |
67mm
|
| Faces de coupe |
2
|
|
| Poids |
1 kg |
| Diamètre lame de scie |
700mm
|
| Diamètre de l\' arbre |
30 mm
|
| Epaisseur dent |
4,2mm
|
| nombre de dents |
60
|
|
|
| Filetage |
M33
|
| Ouverture maximale |
889 mm
|
|
| Poids |
0,05 kg |
| Diamètre |
10mm
|
| Longeur de coupe |
19mm, 25mm, 32mm
|
| Longueur |
51mm, 57mm, 63mm
|
| Faces de coupe |
2
|
|
| Poids |
0,5 kg |
| Diamètre |
40mm, 50mm
|
| Diamètre de l\' arbre |
30 mm
|
|
| Poids |
3,2 kg |
| Puissance |
700W
|
| Profondeur de rabotage |
0-3mm
|
| Largeur de rabotage |
80mm
|
| Prof. de rabotage maximale |
22mm
|
| Nominale snelheid |
16500rpm
|
|
