Deux mousses EVA de remplacement haute densité pour le PushPRO. Les caoutchoucs sont réversibles, ils peuvent donc être utilisés deux fois.
À utiliser uniquement sur un bâton PushPRO (vendu séparément).
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included).
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling.
The Kreg Pocket-Hole Jig 320 is a complete basic set for pocket-hole connections. The drill jig features two drill guides, a removable spacer and convenient material thickness stops. The included material thickness gauge and EasySet drill bit make installation extremely easy, while the convenient clamp adapter and non-slip base keep the jig precisely positioned as you drill perfectly positioned pocket holes every time. The jig and included components come in a durable, compact case that even has room to store Kreg pocket screws. The drill guides are made of hardened steel with a lifetime warranty.
Connector en caoutchouc + colliers à diamètre 100mm à utiliser en combinaison avec les systèmes d'aspiration d'Air Flux.
The ITAMAC ST1400 sliding table can be easily installed on most saw tables, spindle machines, etc. to greatly increase capacity. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
Joint isolant en silicone pour fenêtres et portes de couleur marron. Excellente résistance à des températures comprises entre -60 et 200°C. Avec ce sceau, vous bénéficierez à la fois d'une bonne isolation température et d'une bonne isolation acoustique. Essentiel pour les nouvelles constructions et facile à intégrer dans les constructions existantes. Utilisez la rainureuse Virutex RA17VG avec le mèche droit double.
Disponible en diamètre 6mm ou 8mm.
Groefzaagblad met vlakke (FZ), widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Dit zaagblad is beschikbaar in verschillende diameters
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Grâce au face de coupe supplémentaire en bout de fraise (Z=2+1), c'est aussi possible de facilement faire de perçage.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Set profielmessen hoogte 40mm Nr. 0078 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
This router bit has been developed to easily and quickly mill straight edges or grooves. Thanks to the cutting edges in high quality carbide metal, you can use this bit effortlessly on most types of wood. Easy to use using the ball bearing as a guide. This router bit is perfectly suited for processing laminated materials or veneer sheets.
Vierkante hardmetalen plaquette met radius 2" voor afruwguts 11 mm
Beweegbare bek voor gietijzeren lijmklem Maxipress RT, voor buizen max Ø 30cm, systeem met volledig beschermde schroefdraad
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Jeu de six bagues de remplissage en haute qualité avec un tolérance de 0,01. Produit par le procédé de fineblanking. Tous les bagues ont un alésage de 30 mm et un diamètre de 50 mm. Les épaisseurs varient entre 0,1mm en 3mm.
Content
Deux mousses EVA de remplacement haute densité pour le PushPRO. Les caoutchoucs sont réversibles, ils peuvent donc être utilisés deux fois.
À utiliser uniquement sur un bâton PushPRO (vendu séparément).
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, the optional SVE680 auxiliary support is available. This support is specifically designed to connect to the SVE670 model. Standard delivery with one rubber seal already installed.
The Kreg Pocket-Hole Jig 320 is a complete basic set for pocket-hole connections. The Kreg Pocket-Hole Jig 320 makes it easier than ever to build wood projects - whether you're building your first DIY project or have been working with wood for years. The Pocket-Hole Jig 320 uses a simple, easy-to-understand installation process that gives you the versatility you need to build with boards and plywood of any thickness between +/- 12 mm and +/- 38 mm.
The 320 features two drill guides, a removable spacer and convenient material thickness stops. The included material thickness gauge and EasySet drill bit make installation extremely easy, while the convenient clamp adapter and non-slip base keep the jig precisely positioned as you drill perfectly positioned pocket holes every time. The jig and included components come in a durable, compact case that even has room to store Kreg pocket screws. The drill guides are made of hardened steel with a lifetime warranty.
Some other improvements:
'Twist-apart' design - drill guides and spacer ring rotate and lock in place for easy hole spacing.
'EasySet' drill bit - engraved bit markings and depth stop with viewing window simplify bit configuration.
Clamp adapter - convenient attachment for easy and fast clamping with clamps from Kreg and other brands.
Material thickness gauge/allen key - helps to set the correct depth of the drill bit, also works as an allen key.
The Pocket-Hole Jig 320 comes with two drill jigs, a spacer, a step drill with drill stop, a clamp adapter, a material thickness gauge, a screw bit, a Kreg 32 mm screw set, a Kreg Blue Kote 64 mm screw set and an instruction manual. Everything is delivered in one carrying case.
Connector en caoutchouc + colliers à diamètre 100mm à utiliser en combinaison avec les systèmes d'aspiration d'Air Flux.
The ITAMAC ST1400 sliding table can be easily installed on most saw tables, spindle machines, etc. to greatly increase capacity. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
Joint isolant en silicone pour fenêtres et portes de couleur marron. Excellente résistance à des températures comprises entre -60 et 200°C. Avec ce sceau, vous bénéficierez à la fois d'une bonne isolation température et d'une bonne isolation acoustique. Essentiel pour les nouvelles constructions et facile à intégrer dans les constructions existantes. Utilisez la rainureuse Virutex RA17VG avec le mèche droit double.
Disponible en diamètre 6mm ou 8mm.
Groefzaagblad met vlakke (FZ), widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Dit zaagblad is beschikbaar in verschillende diameters
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Grâce au face de coupe supplémentaire en bout de fraise (Z=2+1), c'est aussi possible de facilement faire de perçage. Le fraise est réalisé complètement en métal dure (carbide) et a une finition spéciale 'micrograin' pour des prestations améliorés. Grâce à tous ces qualités, le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Set profielmessen hoogte 40mm Nr. 0078 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
This router bit has been developed to easily and quickly mill straight edges or grooves. Thanks to the cutting edges in high quality carbide metal, you can use this bit effortlessly on most types of wood. Easy to use using the ball bearing as a guide. This router bit is perfectly suited for processing laminated materials or veneer sheets.
Vierkante hardmetalen plaquette met radius 2" voor afruwguts 11 mm
Beweegbare bek voor klem Maxipress RT, buizen Ø 30cm
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Jeu de six bagues de remplissage en haute qualité avec un tolérance de 0,01. Produit par le procédé de fineblanking. Tous les bagues ont un alésage de 30 mm et un diamètre de 50 mm. Les épaisseurs varient entre 0,1mm en 3mm.
Weight
0,2 kg
1 kg
1 kg
0,5 kg
42 kg
2 kg
1 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
ND
1,3 kg
0,05 kg
0,5 kg
Dimensions
ND
ND
ND
ND
130 × 45 × 40 cm
ND
ND
ND
ND
ND
0,4 cm
ND
ND
ND
ND
ND
Additional information
Poids
0,2 kg
Poids
1 kg
Puissance
95W
Afmetingen werkvlak
150x150mm
Vacuümdruk
750mbar
Poids
1 kg
Poids
0,5 kg
Diamètre
100mm
Poids
42 kg
Dimensions
130 × 45 × 40 cm
Poids
2 kg
Diamètre
6mm, 8mm
Poids
1 kg
Diamètre lame de scie
125mm, 150mm, 180mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
7,0mm
Epaisseur lame de scie
6,0mm
nombre de dents
12, 18, 24
Poids
0,05 kg
Diamètre
10mm
Longeur de coupe
32mm
Longueur
76mm
Queue
12mm
Faces de coupe
2
Poids
0,05 kg
Diamètre
12mm
Longeur de coupe
19mm, 25mm, 32mm
Longueur
51mm, 57mm, 63mm
Faces de coupe
2
Poids
0,05 kg
Diamètre
5mm
Longeur de coupe
11mm, 16mm
Longueur
51mm, 55mm
Faces de coupe
2+1
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Diamètre
6,4mm
Longeur de coupe
19mm
Longueur
57mm
Queue
8mm
Faces de coupe
1
Poids
1,3 kg
Poids
0,05 kg
Diamètre
12mm
Longeur de coupe
19mm, 25mm
Longueur
51mm, 57mm
Faces de coupe
2+1
Poids
0,5 kg
Diamètre
50mm
Diamètre de l\' arbre
30 mm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy