Un jeu de dix bagues de remplissage de haute qualité avec une tolérance de 0,01. Les épaisseurs varient entre 1mm et 10mm avec graduation au 1. Ces bagues sont disponibles avec un alésage de 30 mm (Ø45 mm) ou de 50 mm (Ø70 mm).
Capot et table à tenonner à utiliser sur le toupie Spindle TT1000ST de notre gamme Revolution. Le diamètre maximum de la fraise sous le capot est de Ø320mm.
Works with all machines up to 7.5 KW. Connect several machines so that they can be started up together. Use this simultaneous starter when combining a woodworking machine and dust extractor. The starter motor ensures that your dust extraction system starts up automatically four seconds after you start up your woodworking machine yourself. After stopping your woodworking machine, extraction is also stopped a few seconds later. These extra few seconds of suction ensure that your pipes are always clean.
This sawhorse is made of sheet steel and has a load capacity of 150kg. Fully foldable and equipped with a handle for easy transport. Support surface with anti-slip. Working height of the sawhorse 78cm.
Adjustable cutterhead with reversible knives in high quality carbide metal (HW) for making thin precision grooves. Adjustable in height between 4mm and 7.5mm by means of spacer rings. Spacer rings included as standard. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
An additional spacer to mill grooves up to 15mm is available on request.
Freeskop in lichtmetaal met omkeerbare messen in hoogwaardig hardmetaal (HW). De messen staan onder een exacte hoek van 45° voor een precieze afwerking van uw schuine kanten. De frees is perfect geschikt voor het frezen van schuine kanten om bijvoorbeeld lijsten te vervaardigen. Dankzij de hardmetalen messen snijdt deze groeffrees moeiteloos door massieve platen of massieve houtsoorten en bekomt u steeds een glad oppervlak. Ook geschikt om te gebruiken op beplakte materialen.
Verkrijgbaar met asgat 30mm of 50mm.
De GuidePRO (apart verkrijgbaar) kan klemmen tot 15cm hoog. Voor groter materiaal voegt de GuidePRO-verlenging een extra 10 cm hoogte toe, waardoor u 25 cm dekking krijgt op de voorrand van uw materiaal. De GuidePRO Extension wordt geleverd met een 25cm siliconen veer. Wordt bevestigd aan de bovenkant van de GuidePRO. Alleen voor gebruik met GuidePRO (apart verkrijgbaar)
Set profielmessen hoogte 50mm Nr. 2069 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Met deze set van drie beschermende pads maak je jou Piher PRL400 klem weer als nieuw.
De pads klik je gewoon op de klem wanneer de originele pads te beschadigd geworden zijn.
Houder voor smartphone of tablet. Past op alle universele houders van Piher.
Gemaakt uit ABS kunststof met rubber beschermd contactoppervlak om je toestel niet te beschadigen.
Minimum opening 12 cm, maximum opening 22 cm.
Lame de scie avec 20 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
Lame de scie à ruban d’une longueur de 3345mm à utiliser sur la scie à ruban TT400 de Tendotools. Ce ruban de scie a 6 TPI (dents par inch) et a une largeur de 25 ou 32mm. Cette lame en acier trempé "Flexback" est très adapté au sciage polyvalent. Utilisez cette lame de scie pour le bois et le plastique. Les dents de la lame de scie ont reçu un traitement thermique supplémentaire pour augmenter leur dureté. Cela permet de garder la ruban très souple et d'augmenter votre confort de coupe grâce à la dureté des dents.
Epaisseur de 0,90mm.
La table à vide SFV150 est adaptée pour une fixation solide et rapide du panneau. Grâce aux ventouses, ce support est idéal pour tous les matériaux lisses et non poreux. Pour fixer le support, une pince est fournie en standard. La table est un moyen efficace et convivial de tenir le panneau et de travailler confortablement sur les bords. Pour les pièces de grande taille, il est recommandé d'utiliser plusieurs supports. Le support peut être placé à la fois horizontalement et verticalement. Egalement disponible avec deux ventouses comme SFV50.
Set profielmessen hoogte 40mm Nr. 0051 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
LAST PIECES!
Strong sawhorse made of 40x20x1.2mm steel profile with a load capacity of up to 500kg. Easily foldable. This sawhorse is available in two different heights.
De verstelbare rollensteun ondersteund werkstukken tot 40 kg en is zowel horizontaal als verticaal te gebruiken. Chroom geplateerde roller met kogellagers met een Heavy-Duty basis. De basis is voorzien van een klem die op elk oppervlakte kan geplaatst worden tot 6,5cm dikte. Hoogte verstelling van 8cm – 40cm ten opzichte van de klem. De rollensteun is snel demonteerbaar om weg te bergen wanneer je hem niet gebruikt.
Set profielmessen hoogte 50mm Nr. 2071 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0028 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0011 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0019 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Ce pousseur peut être utilisé sur le Belmash Universal 2000.
With the Precision Stock Guides, you don't have to struggle to hold plates or beams while pushing through on the saw - and router table. The rollers pull your workpiece tightly into place against the guide and your work table. You will cut more safely, easily and precisely while keeping your workpiece in place at all times.
Adapter 1218
Set profielmessen hoogte 40mm Nr. 0022 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
La fraise creuse permet de fraiser rapidement et facilement des arêtes ou des profils convexes sur les appuis de fenêtre, les bords de table, les planches et de fabriquer des moulures. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois. Passez plusieurs fois lorsque vous enlevez de grandes quantités de matière.
Chevilles à trou en bois massif, taille standard. Ces fiches ont été spécialement conçues pour fournir des connexions très solides. Les gabarits pour trous de poche permettent de dissimuler ces bouchons de manière transparente.
Universeel links-rechts getand zaagblad geschikt voor het verzagen van verschillende houtsoorten of houten platen. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk in massief hout. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede in zowel massief hout als plaatmateriaal.
Verkrijgbaar met verschillend aantal tanden.
Vis à tête carrée Kreg en acier inoxydable. La vis a une longueur de 32 mm (1 1/4") et un filet fin, ce qui la rend idéale pour le bois dur. Nos vis en acier inoxydable sont spécialement conçues pour les environnements humides, l'exposition à l'eau et autres environnements corrosifs, tels que le bois traité sous pression.
Cette vis est disponible en paquets de 100.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Dankzij het fijne zaagblad is de decoupeerzaag bij uitstek geschikt voor het zagen van willekeurige vormen in plaatmateriaal. The foot plate can be adjusted to an angle of up to 45°, under reinforced cutting is possible with this unit. Its agile nature makes it suitable for fine finishing. It can be used in wood, plastic, ceramics and hard aluminium. The necessary saw blades are included.
Duro-Polish is ideal for polishing and pre-polishing stainless steel. Thanks to the abrasive's lamellar structure, the felt is not "burned" during the polishing process, preventing streaking. It is important to use DuroPol only in combination with the right polishing paste: pre-polishing paste should be used for pre-polishing, while gloss paste is suitable for high-gloss polishing. This combination allows you to achieve high-quality polishing results without leaving streaks.
Thanks to the grain distribution in the fleece, the DuroGrind offers a longer service life. The constant grit ensures an even sanding pattern. Equipped with elastic nylon fleece with granules, it is ideal for shadow-free matting, satinising and polishing of stainless steel and non-ferrous metals. It removes staining after welding stainless steel, light deburring and light oxidation. In addition, it can be used on wood to smooth surfaces. With a maximum speed of 5,600 /min and a recommended speed of 2,900 /min, it is suitable for both wet and dry use
Available in different grain sizes.
Freeskop met hoogte van 90mm om te gebruiken op freesmachines met as 50mm. Deze kop is geschikt om te gebruiken met al onze profielmessen van hoogte 90mm. Deze hoge profielen worden vooral gebruikt voor het frezen van lambrisering, kroonlijsten of dakprofielen.
Le support de rouleau réglable supporte des pièces jusqu'à 40 kg et peut être utilisé horizontalement et verticalement. Rouleau à roulement à billes chromé avec une base robuste. La base est équipée d'une pince qui peut être placée sur n'importe quelle surface jusqu'à 6,5 cm d'épaisseur Réglage de la hauteur de 8 cm à 40 cm par rapport à la pince. Le servante à rouleau peut être rapidement démonté pour le stockage lorsqu'il n'est pas utilisé.
Set profielmessen hoogte 40mm Nr. 0014 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Reserve trigger voor alle PIHER zuignappen die gebruik maken van een hendel. Inclusief metalen pen en plaatje.
Set profielmessen hoogte 40mm Nr. 0081 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ce ciseau à usages multiples est utilisé pour façonner et finir différentes surfaces.
Set profielmessen hoogte 50mm Nr. 2045 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lame de scie à ruban d’une longueur de 3607mm à utiliser sur la scie à ruban TT500X de Tendotools. Ce ruban de scie a 6 TPI (dents par inch) et a une largeur de 13, 16 ou 20mm. Cette lame en acier trempé "Flexback" est très adapté au sciage polyvalent. Utilisez cette lame de scie pour le bois et le plastique. Les dents de la lame de scie ont reçu un traitement thermique supplémentaire pour augmenter leur dureté. Cela permet de garder la ruban très souple et d'augmenter votre confort de coupe grâce à la dureté des dents. D’une épaisseur de 0,80 mm, le ruban de 13 mm a une épaisseur de 0,65 mm.
Set profielmessen hoogte 40mm Nr. 0020 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw blade with 36 teeth
Saw blade with flat teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Made in Germany, take advantage of the extremely solid German quality.
The MT58K table is mobile, height-adjustable (with four fixed positions) and foldable for easy storage. The table provides a stable and solid base for attaching and transporting machines. The table can be moved or adjusted in height while the machine is attached. As a result, you do not have to constantly assemble or disassemble the machine. Adjusting the height is easy. Operate with your foot at the bottom of the height adjustment, then use the lever to secure it in the correct position. The maximum load-bearing capacity of the table is 100kg. Thanks to its small size, this table is ideal for use on location.
Extension pieces are optionally available.
The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).
The Kreg 720 Pro comes with a Docking Station. This extension provides more support for larger equipment and more storage space. The side pieces of the Docking Station can be easily folded to store the system when not in use. In addition, the side pieces can also be disconnected from the system so that you can create even more support for your workpiece.
You can measure the thickness of the material with the supplied material thickness gauge. At the bottom of the Kreg 720 is a built-in storage system for the drill, driver bits and material thickness gauge.
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges and chip breakers.
This set consists of bits with diameter: 6 - 8 - 10 - 12 - 14 - 16mm. Available with left or right hand rotation.
Cette table pneumatique à vide sur support basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. Le support doit être fixé à l'aide de pinces (non comprises). Ce support est spécialement conçu pour se connecter au modèle SVN450 ou SVN460. Pas de connexion directe au compresseur comme le modèle SVN450 ou SVN460.
Content
Un jeu de dix bagues de remplissage de haute qualité avec une tolérance de 0,01. Les épaisseurs varient entre 1mm et 10mm avec graduation au 1. Ces bagues sont disponibles avec un alésage de 30 mm (Ø45 mm) ou de 50 mm (Ø70 mm).
Capot et table à tenonner à utiliser sur le toupie Spindle TT1000ST de notre gamme Revolution. Le diamètre maximum de la fraise sous le capot est de Ø320mm. Entièrement conforme à la classification CE actuelle pour ce type de machines.
Works with all machines up to 7.5 KW. Connect several machines so that they can be started up together. Use this simultaneous starter when combining a woodworking machine and dust extractor. The starter motor ensures that your dust extraction system starts up automatically four seconds after you start up your woodworking machine yourself. After stopping your woodworking machine, extraction is also stopped a few seconds later. These extra few seconds of suction ensure that your pipes are always clean.
This sawhorse is made of sheet steel and has a load capacity of 150kg. Fully foldable and equipped with a handle for easy transport. Support surface with anti-slip. Working height of the sawhorse 78cm.
Adjustable cutterhead with reversible knives in high quality carbide metal (HW) for making thin precision grooves. Adjustable in height between 4mm and 7.5mm by means of spacer rings. Spacer rings included as standard. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
An additional spacer to mill grooves up to 15mm is available on request.
Freeskop in lichtmetaal met omkeerbare messen in hoogwaardig hardmetaal (HW). De messen staan onder een exacte hoek van 45° voor een precieze afwerking van uw schuine kanten. De frees is perfect geschikt voor het frezen van schuine kanten om bijvoorbeeld lijsten te vervaardigen. Dankzij de hardmetalen messen snijdt deze groeffrees moeiteloos door massieve platen of massieve houtsoorten en bekomt u steeds een glad oppervlak. Ook geschikt om te gebruiken op beplakte materialen.
Verkrijgbaar met asgat 30mm of 50mm.
De GuidePRO (apart verkrijgbaar) kan klemmen tot 15cm hoog. Voor groter materiaal voegt de GuidePRO-verlenging een extra 10 cm hoogte toe, waardoor u 25 cm dekking krijgt op de voorrand van uw materiaal. De GuidePRO Extension wordt geleverd met een 25cm siliconen veer. Wordt bevestigd aan de bovenkant van de GuidePRO. Alleen voor gebruik met GuidePRO (apart verkrijgbaar)
Set profielmessen hoogte 50mm Nr. 2069 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Met deze set van drie beschermende pads maak je jou Piher PRL400 klem weer als nieuw.
De pads klik je gewoon op de klem wanneer de originele pads te beschadigd geworden zijn.
Deze houder laat je toe een smartphone of tablet te voorzien van een stevige steun op de gekste plekken.
Houder voor smartphone of tablet met 1/4" schroefdraad en past dus op alle universele houders van Piher.
Gemaakt uit ABS kunststof met rubber beschermd contactoppervlak om je toestel niet te beschadigen.
Minimum opening 12cm, maximum opening 22cm.
Lame de scie avec 20 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
Lame de scie à ruban d’une longueur de 3345mm à utiliser sur la scie à ruban TT400 de Tendotools. Ce ruban de scie a 6 TPI (dents par inch) et a une largeur de 25 ou 32mm. Cette lame en acier trempé "Flexback" est très adapté au sciage polyvalent. Utilisez cette lame de scie pour le bois et le plastique. Les dents de la lame de scie ont reçu un traitement thermique supplémentaire pour augmenter leur dureté. Cela permet de garder la ruban très souple et d'augmenter votre confort de coupe grâce à la dureté des dents.
La table à vide SFV150 est adaptée pour une fixation solide et rapide du panneau. Grâce aux ventouses, ce support est idéal pour tous les matériaux lisses et non poreux. Pour fixer le support, une pince est fournie en standard. La table est un moyen efficace et convivial de tenir le panneau et de travailler confortablement sur les bords. Pour les pièces de grande taille, il est recommandé d'utiliser plusieurs supports. Le support peut être placé à la fois horizontalement et verticalement. Egalement disponible avec deux ventouses comme SFV50.
Set profielmessen hoogte 40mm Nr. 0051 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Strong sawhorse made of 40x20x1.2mm steel profile with a load capacity of up to 500kg. Easily foldable. This sawhorse is available in two different heights.
De verstelbare rollensteun ondersteund werkstukken tot 40 kg en is zowel horizontaal als verticaal te gebruiken. Chroom geplateerde roller met kogellagers met een Heavy-Duty basis. De basis is voorzien van een klem die op elk oppervlakte kan geplaatst worden tot 6,5cm dikte. Hoogte verstelling van 8cm – 40cm ten opzichte van de klem. De rollensteun is snel demonteerbaar om weg te bergen wanneer je hem niet gebruikt.
Set profielmessen hoogte 50mm Nr. 2071 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0028 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0011 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0019 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Ce pousseur peut être utilisé sur le Belmash Universal 2000.
With the Precision Stock Guides, you don't have to struggle to hold plates or beams while pushing through on the saw - and router table. The rollers pull your workpiece tightly into place against the guide and your work table. You will cut more safely, easily and precisely while keeping your workpiece in place at all times.
Nothing can give you more safety and precision while holding your workpiece. You prevent kickback with this. And this without limitations!
The unique guide rollers on the Stock Guide are angled at 5 degrees, effectively and consistently pressing your workpiece against the guide. To prevent kickback, each roller is fitted with a ball bearing that can only rotate 1 way.
Your workpiece is pushed tightly against the guide and work table, and the grip of the polyurethane rollers keeps it safely in position.
The Precision Stock Guide can be attached to a standard T-Track used for most commercial routing tables. They also work just as well on a workbench or drill table with a 1/4" T-Track on the guide.
The Precision Stock Guides are CNC milled from sturdy aluminium and anodised for appearance and durability. The axles of the wheels are made of cold-rolled steel and hardened for durability. The adjustment knobs are made of stainless steel to last. The wheels are again made of wear-resistant acetol plastic, so it also has low friction resistance. The non-slip tyres are moulded from polyurethane for long life and superior grip on your workpiece.
The ITAMAC Precision Stock Guides can be installed easily and quickly. Along the profile, you can attach them in any position with a twist of the two knobs. You can set the height using the clamp button. When not in use, simply turn them aside.
Adapter 1218
Set profielmessen hoogte 40mm Nr. 0022 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
La fraise creuse permet de fraiser rapidement et facilement des arêtes ou des profils convexes sur les appuis de fenêtre, les bords de table, les planches et de fabriquer des moulures. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois. Passez plusieurs fois lorsque vous enlevez de grandes quantités de matière.
Chevilles à trou en bois massif, taille standard. Ces fiches ont été spécialement conçues pour fournir des connexions très solides. Les gabarits pour trous de poche permettent de dissimuler ces bouchons de manière transparente.
Universeel links-rechts getand zaagblad geschikt voor het verzagen van verschillende houtsoorten of houten platen. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk in massief hout. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede in zowel massief hout als plaatmateriaal. Verkrijgbaar met verschillend aantal tanden.
Vis à tête carrée Kreg en acier inoxydable. La vis a une longueur de 32 mm (1 1/4") et un filet fin, ce qui la rend idéale pour le bois dur. Nos vis en acier inoxydable sont spécialement conçues pour les environnements humides, l'exposition à l'eau et autres environnements corrosifs, tels que le bois traité sous pression.
Cette vis est disponible en paquets de 100.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Thanks to its fine saw blade, the jigsaw is ideally suited for cutting random shapes in sheet metal. The foot plate can be adjusted to an angle of up to 45°, under reinforced cutting is possible with this unit. Its agile nature makes it suitable for fine finishing. It can be used in wood, plastic, ceramics and hard aluminium. The necessary saw blades are included.
Polishing brush for polishing stainless steel, metal, lacquer, etc. Slat structure prevents the felt from burning. This brush allows you to achieve high-quality polishing results without leaving streaks.
Known for its excellent properties, the DuroGrind brush consistently delivers high-quality surface results. Whether ferrous and non-ferrous metals or alloyed and unalloyed steel, this versatile brush offers optimal performance.
Thanks to the improved properties of DuroGrind, you can rely on exceptional surface quality. With DuroGrind, you can achieve the highest quality regardless of the type of metal you process.
Freeskop met hoogte van 90mm om te gebruiken op freesmachines met as 50mm. Deze kop is geschikt om te gebruiken met al onze profielmessen van hoogte 90mm. Deze hoge profielen worden vooral gebruikt voor het frezen van lambrisering, kroonlijsten of dakprofielen.
Le support de rouleau réglable supporte des pièces jusqu'à 40 kg et peut être utilisé horizontalement et verticalement. Rouleau à roulement à billes chromé avec une base robuste. La base est équipée d'une pince qui peut être placée sur n'importe quelle surface jusqu'à 6,5 cm d'épaisseur Réglage de la hauteur de 8 cm à 40 cm par rapport à la pince. Le servante à rouleau peut être rapidement démonté pour le stockage lorsqu'il n'est pas utilisé.
Set profielmessen hoogte 40mm Nr. 0014 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Reserve trigger voor alle PIHER zuignappen die gebruik maken van een hendel. Inclusief metalen pen en plaatje.
Set profielmessen hoogte 40mm Nr. 0081 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ce ciseau à usages multiples est utilisé pour façonner et finir différentes surfaces pendant le tournage entre les pointes.
Set profielmessen hoogte 50mm Nr. 2045 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lame de scie à ruban d’une longueur de 3607mm à utiliser sur la scie à ruban TT500X de Tendotools. Ce ruban de scie a 6 TPI (dents par inch) et a une largeur de 13, 16 ou 20mm. Cette lame en acier trempé "Flexback" est très adapté au sciage polyvalent. Utilisez cette lame de scie pour le bois et le plastique. Les dents de la lame de scie ont reçu un traitement thermique supplémentaire pour augmenter leur dureté. Cela permet de garder la ruban très souple et d'augmenter votre confort de coupe grâce à la dureté des dents.
Set profielmessen hoogte 40mm Nr. 0020 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw blade with 36 teeth
Saw blade with flat teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Made in Germany, take advantage of the extremely solid German quality.
The MT58K table is mobile, height-adjustable (with four fixed positions) and foldable for easy storage. The table provides a stable and solid base for attaching and transporting machines. The table can be moved or adjusted in height while the machine is attached. As a result, you do not have to constantly assemble or disassemble the machine. Adjusting the height is easy. Operate with your foot at the bottom of the height adjustment, then use the lever to secure it in the correct position. The maximum load-bearing capacity of the table is 100kg. Thanks to its small size, this table is ideal for use on location.
The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).
The Kreg 720 Pro comes with a Docking Station. This extension provides more support for larger equipment and more storage space. The side pieces of the Docking Station can be easily folded to store the system when not in use. In addition, the side pieces can also be disconnected from the system so that you can create even more support for your workpiece.
With the supplied material stop you make repetitive work even easier. You simply slide the stop onto the side piece of the Docking Station and this creates extra stability for your workpiece. The material stopper can be stored in the Docking Station after use.
The included steel Pocket-Hole Jig clamp is ideal for clamping your connection system to your work surface. This makes it a complete and professional connection system for your workbench. The clamp is also easy to store in the Docking Station after use.
Setting up the Kreg Jig 720 Pro is quick and easy. You simply put your material in the jig and push the handle down. The system then does all the work for you and adjusts to the correct thickness. The handle also gives you full control over the clamping force! In addition, the system has anti-slip material. This will hold your workpiece securely in place without marking your wood.
You can measure the thickness of the material with the supplied material thickness gauge. The following sizes are indicated on it: 1/2”, 3/4” and 1 1/2” (13, 19 and 38 mm). These measurements correspond to the measurements on the step drill. You tighten the drill stop to the correct size with the material thickness gauge which is also an Allen key.
At the bottom of the Kreg 720 Pro is a built-in storage system for the drill, screw bits and the material thickness gauge. Next to the storage space, the dimensions are shown, with several intermediate steps. This allows you to set the stop collar even more precisely on the drill bit.
The Kreg 720 Pro connection system also comes with an extraction piece that can be attached to the left and right of the drilling jig. An extraction hose can then be connected to this. In this way, dust and wood chips are sucked out of the way and you continue to have a good view of your work surface. This makes making pocket holes a lot more efficient.
The Kreg connection system can be used horizontally and vertically. This way you can make pocket holes however you want.
As you are used to from Kreg, this system is also built on durability. Thanks to the shock-resistant and durable plastic construction with a hardened steel core, you can rest assured that the system will last.
The 720 Pro comes with a whopping 160 Pocket-Hole screws in the two most popular sizes. You will also receive a project plan. So you can get started right away!
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges and chip breakers.
Available with left or right hand rotation. This set consists of boring bits of diameter: 6mm - 8mm - 10mm - 12mm - 14mm - 16mm.
Cette table pneumatique à vide sur support basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. Le support doit être fixé à l'aide de pinces (non comprises). Ce support est spécialement conçu pour se connecter au modèle SVN450 ou SVN460. Pas de connexion directe au compresseur comme le modèle SVN450 ou SVN460.
Weight
0,05 kg
10 kg
1 kg
4,3 kg
1 kg
1 kg
2 kg
0,05 kg
0,05 kg
0,15 kg
1 kg
0,5 kg
1 kg
0,05 kg
ND
2,70 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
2,7 kg
5 kg
0,05 kg
0,05 kg
0,05 kg
2 kg
1 kg
0,25 kg
0,05 kg
3 kg
0,300 kg
0,3 kg
1 kg
2,70 kg
0,05 kg
0,01 kg
0,05 kg
0,500 kg
0,05 kg
0,5 kg
0,05 kg
1 kg
5 kg
3 kg
ND
1 kg
Dimensions
ND
ND
ND
ND
ND
ND
ND
0,5 cm
ND
ND
ND
ND
ND
0,4 cm
ND
45 cm
0,5 cm
0,4 cm
0,4 cm
0,4 cm
30 × 26 × 7 cm
ND
ND
0,4 cm
ND
ND
ND
ND
ND
ND
10,7 × 10 cm
12 × 10 cm
9 cm
45 cm
0,4 cm
ND
0,4 cm
380 cm
0,5 cm
ND
0,4 cm
ND
ND
ND
ND
ND
Additional information
Poids
0,05 kg
Diamètre de l\' arbre
30 mm, 50 mm
Diamètre
45mm, 70mm
Poids
10 kg
Max. Ø de fraise
320mm
Poids
1 kg
Poids
4,3 kg
Supporte
150kg
Poids
1 kg
Diamètre
140mm
Diamètre de l\' arbre
30 mm
Faces de coupe
4
nombre de dents
4
Longeur de coupe
32mm
Hauteur de rainure
4-7,5mm
RPM Min-Max
5500-9400
Poids
1 kg
Diamètre
150mm
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
2
Hauteur de rainure
36mm
RPM Min-Max
5000-9500, 5100-8800
Poids
2 kg
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,05 kg
Poids
0,15 kg
Poids
1 kg
Diamètre lame de scie
315mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,2mm
nombre de dents
20
Poids
0,5 kg
Longueur
3345mm
Largeur
25mm, 32mm
Largeur
0,90
Poids
1 kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
ND
Hauteur
75cm, 90cm
Poids
2,70 kg
Dimensions
45 cm
Supporte
40kg
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
2,7 kg
Dimensions
30 × 26 × 7 cm
Hauteur max. de la pièce
63mm
Largeur max. de la pièce
200mm
Poids
5 kg
Poids
0,05 kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Diamètre
20,2mm
Longeur de coupe
32mm
Longueur
62,6mm
Rayon
R18
Queue
8mm
Faces de coupe
2
Poids
2 kg
Poids
1 kg
Diamètre lame de scie
150mm
Diamètre de l\' arbre
20mm
Epaisseur dent
2,6mm
Epaisseur lame de scie
1,6mm
nombre de dents
24, 40, 48
Poids
0,25 kg
Pièces par emballage
100
Longueur
32mm
Matériel
Acier inoxydable
Poids
0,05 kg
Diamètre
19mm
Longueur
90mm
Queue
10x60mm
Poids
3 kg
Puissance
550W
onbelast toerental
300 – 3200 rpm
slaglengte
26mm
schuine hoek
0° 15° 30° 45°
materialen
wood 80 mm
steel 5 mm
non-ferrous metals 20 mm
hard aluminium 15 mm
ceramics 10 mm
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy