Chevilles à trou en bois massif, taille standard. Ces fiches ont été spécialement conçues pour fournir des connexions très solides. Les gabarits pour trous de poche permettent de dissimuler ces bouchons de manière transparente.
Universeel links-rechts getand zaagblad geschikt voor het verzagen van verschillende houtsoorten of houten platen. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk in massief hout. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede in zowel massief hout als plaatmateriaal.
Verkrijgbaar met verschillend aantal tanden.
Vis à tête carrée Kreg en acier inoxydable. La vis a une longueur de 32 mm (1 1/4") et un filet fin, ce qui la rend idéale pour le bois dur. Nos vis en acier inoxydable sont spécialement conçues pour les environnements humides, l'exposition à l'eau et autres environnements corrosifs, tels que le bois traité sous pression.
Cette vis est disponible en paquets de 100.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Dankzij het fijne zaagblad is de decoupeerzaag bij uitstek geschikt voor het zagen van willekeurige vormen in plaatmateriaal. The foot plate can be adjusted to an angle of up to 45°, under reinforced cutting is possible with this unit. Its agile nature makes it suitable for fine finishing. It can be used in wood, plastic, ceramics and hard aluminium. The necessary saw blades are included.
Duro-Polish is ideal for polishing and pre-polishing stainless steel. Thanks to the abrasive's lamellar structure, the felt is not "burned" during the polishing process, preventing streaking. It is important to use DuroPol only in combination with the right polishing paste: pre-polishing paste should be used for pre-polishing, while gloss paste is suitable for high-gloss polishing. This combination allows you to achieve high-quality polishing results without leaving streaks.
Thanks to the grain distribution in the fleece, the DuroGrind offers a longer service life. The constant grit ensures an even sanding pattern. Equipped with elastic nylon fleece with granules, it is ideal for shadow-free matting, satinising and polishing of stainless steel and non-ferrous metals. It removes staining after welding stainless steel, light deburring and light oxidation. In addition, it can be used on wood to smooth surfaces. With a maximum speed of 5,600 /min and a recommended speed of 2,900 /min, it is suitable for both wet and dry use
Available in different grain sizes.
Freeskop met hoogte van 90mm om te gebruiken op freesmachines met as 50mm. Deze kop is geschikt om te gebruiken met al onze profielmessen van hoogte 90mm. Deze hoge profielen worden vooral gebruikt voor het frezen van lambrisering, kroonlijsten of dakprofielen.
Le support de rouleau réglable supporte des pièces jusqu'à 40 kg et peut être utilisé horizontalement et verticalement. Rouleau à roulement à billes chromé avec une base robuste. La base est équipée d'une pince qui peut être placée sur n'importe quelle surface jusqu'à 6,5 cm d'épaisseur Réglage de la hauteur de 8 cm à 40 cm par rapport à la pince. Le servante à rouleau peut être rapidement démonté pour le stockage lorsqu'il n'est pas utilisé.
Set profielmessen hoogte 40mm Nr. 0014 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Reserve trigger voor alle PIHER zuignappen die gebruik maken van een hendel. Inclusief metalen pen en plaatje.
Set profielmessen hoogte 40mm Nr. 0081 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ce ciseau à usages multiples est utilisé pour façonner et finir différentes surfaces.
Set profielmessen hoogte 50mm Nr. 2045 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lame de scie à ruban d’une longueur de 3607mm à utiliser sur la scie à ruban TT500X de Tendotools. Ce ruban de scie a 6 TPI (dents par inch) et a une largeur de 13, 16 ou 20mm. Cette lame en acier trempé "Flexback" est très adapté au sciage polyvalent. Utilisez cette lame de scie pour le bois et le plastique. Les dents de la lame de scie ont reçu un traitement thermique supplémentaire pour augmenter leur dureté. Cela permet de garder la ruban très souple et d'augmenter votre confort de coupe grâce à la dureté des dents. D’une épaisseur de 0,80 mm, le ruban de 13 mm a une épaisseur de 0,65 mm.
Set profielmessen hoogte 40mm Nr. 0020 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw blade with 36 teeth
Saw blade with flat teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Made in Germany, take advantage of the extremely solid German quality.
The MT58K table is mobile, height-adjustable (with four fixed positions) and foldable for easy storage. The table provides a stable and solid base for attaching and transporting machines. The table can be moved or adjusted in height while the machine is attached. As a result, you do not have to constantly assemble or disassemble the machine. Adjusting the height is easy. Operate with your foot at the bottom of the height adjustment, then use the lever to secure it in the correct position. The maximum load-bearing capacity of the table is 100kg. Thanks to its small size, this table is ideal for use on location.
Extension pieces are optionally available.
The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).
The Kreg 720 Pro comes with a Docking Station. This extension provides more support for larger equipment and more storage space. The side pieces of the Docking Station can be easily folded to store the system when not in use. In addition, the side pieces can also be disconnected from the system so that you can create even more support for your workpiece.
You can measure the thickness of the material with the supplied material thickness gauge. At the bottom of the Kreg 720 is a built-in storage system for the drill, driver bits and material thickness gauge.
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges and chip breakers.
This set consists of bits with diameter: 6 - 8 - 10 - 12 - 14 - 16mm. Available with left or right hand rotation.
Cette table pneumatique à vide sur support basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. Le support doit être fixé à l'aide de pinces (non comprises). Ce support est spécialement conçu pour se connecter au modèle SVN450 ou SVN460. Pas de connexion directe au compresseur comme le modèle SVN450 ou SVN460.
Content
Chevilles à trou en bois massif, taille standard. Ces fiches ont été spécialement conçues pour fournir des connexions très solides. Les gabarits pour trous de poche permettent de dissimuler ces bouchons de manière transparente.
Universeel links-rechts getand zaagblad geschikt voor het verzagen van verschillende houtsoorten of houten platen. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk in massief hout. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede in zowel massief hout als plaatmateriaal. Verkrijgbaar met verschillend aantal tanden.
Vis à tête carrée Kreg en acier inoxydable. La vis a une longueur de 32 mm (1 1/4") et un filet fin, ce qui la rend idéale pour le bois dur. Nos vis en acier inoxydable sont spécialement conçues pour les environnements humides, l'exposition à l'eau et autres environnements corrosifs, tels que le bois traité sous pression.
Cette vis est disponible en paquets de 100.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Thanks to its fine saw blade, the jigsaw is ideally suited for cutting random shapes in sheet metal. The foot plate can be adjusted to an angle of up to 45°, under reinforced cutting is possible with this unit. Its agile nature makes it suitable for fine finishing. It can be used in wood, plastic, ceramics and hard aluminium. The necessary saw blades are included.
Polishing brush for polishing stainless steel, metal, lacquer, etc. Slat structure prevents the felt from burning. This brush allows you to achieve high-quality polishing results without leaving streaks.
Known for its excellent properties, the DuroGrind brush consistently delivers high-quality surface results. Whether ferrous and non-ferrous metals or alloyed and unalloyed steel, this versatile brush offers optimal performance.
Thanks to the improved properties of DuroGrind, you can rely on exceptional surface quality. With DuroGrind, you can achieve the highest quality regardless of the type of metal you process.
Freeskop met hoogte van 90mm om te gebruiken op freesmachines met as 50mm. Deze kop is geschikt om te gebruiken met al onze profielmessen van hoogte 90mm. Deze hoge profielen worden vooral gebruikt voor het frezen van lambrisering, kroonlijsten of dakprofielen.
Le support de rouleau réglable supporte des pièces jusqu'à 40 kg et peut être utilisé horizontalement et verticalement. Rouleau à roulement à billes chromé avec une base robuste. La base est équipée d'une pince qui peut être placée sur n'importe quelle surface jusqu'à 6,5 cm d'épaisseur Réglage de la hauteur de 8 cm à 40 cm par rapport à la pince. Le servante à rouleau peut être rapidement démonté pour le stockage lorsqu'il n'est pas utilisé.
Set profielmessen hoogte 40mm Nr. 0014 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Reserve trigger voor alle PIHER zuignappen die gebruik maken van een hendel. Inclusief metalen pen en plaatje.
Set profielmessen hoogte 40mm Nr. 0081 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ce ciseau à usages multiples est utilisé pour façonner et finir différentes surfaces pendant le tournage entre les pointes.
Set profielmessen hoogte 50mm Nr. 2045 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lame de scie à ruban d’une longueur de 3607mm à utiliser sur la scie à ruban TT500X de Tendotools. Ce ruban de scie a 6 TPI (dents par inch) et a une largeur de 13, 16 ou 20mm. Cette lame en acier trempé "Flexback" est très adapté au sciage polyvalent. Utilisez cette lame de scie pour le bois et le plastique. Les dents de la lame de scie ont reçu un traitement thermique supplémentaire pour augmenter leur dureté. Cela permet de garder la ruban très souple et d'augmenter votre confort de coupe grâce à la dureté des dents.
Set profielmessen hoogte 40mm Nr. 0020 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw blade with 36 teeth
Saw blade with flat teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Made in Germany, take advantage of the extremely solid German quality.
The MT58K table is mobile, height-adjustable (with four fixed positions) and foldable for easy storage. The table provides a stable and solid base for attaching and transporting machines. The table can be moved or adjusted in height while the machine is attached. As a result, you do not have to constantly assemble or disassemble the machine. Adjusting the height is easy. Operate with your foot at the bottom of the height adjustment, then use the lever to secure it in the correct position. The maximum load-bearing capacity of the table is 100kg. Thanks to its small size, this table is ideal for use on location.
The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).
The Kreg 720 Pro comes with a Docking Station. This extension provides more support for larger equipment and more storage space. The side pieces of the Docking Station can be easily folded to store the system when not in use. In addition, the side pieces can also be disconnected from the system so that you can create even more support for your workpiece.
With the supplied material stop you make repetitive work even easier. You simply slide the stop onto the side piece of the Docking Station and this creates extra stability for your workpiece. The material stopper can be stored in the Docking Station after use.
The included steel Pocket-Hole Jig clamp is ideal for clamping your connection system to your work surface. This makes it a complete and professional connection system for your workbench. The clamp is also easy to store in the Docking Station after use.
Setting up the Kreg Jig 720 Pro is quick and easy. You simply put your material in the jig and push the handle down. The system then does all the work for you and adjusts to the correct thickness. The handle also gives you full control over the clamping force! In addition, the system has anti-slip material. This will hold your workpiece securely in place without marking your wood.
You can measure the thickness of the material with the supplied material thickness gauge. The following sizes are indicated on it: 1/2”, 3/4” and 1 1/2” (13, 19 and 38 mm). These measurements correspond to the measurements on the step drill. You tighten the drill stop to the correct size with the material thickness gauge which is also an Allen key.
At the bottom of the Kreg 720 Pro is a built-in storage system for the drill, screw bits and the material thickness gauge. Next to the storage space, the dimensions are shown, with several intermediate steps. This allows you to set the stop collar even more precisely on the drill bit.
The Kreg 720 Pro connection system also comes with an extraction piece that can be attached to the left and right of the drilling jig. An extraction hose can then be connected to this. In this way, dust and wood chips are sucked out of the way and you continue to have a good view of your work surface. This makes making pocket holes a lot more efficient.
The Kreg connection system can be used horizontally and vertically. This way you can make pocket holes however you want.
As you are used to from Kreg, this system is also built on durability. Thanks to the shock-resistant and durable plastic construction with a hardened steel core, you can rest assured that the system will last.
The 720 Pro comes with a whopping 160 Pocket-Hole screws in the two most popular sizes. You will also receive a project plan. So you can get started right away!
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges and chip breakers.
Available with left or right hand rotation. This set consists of boring bits of diameter: 6mm - 8mm - 10mm - 12mm - 14mm - 16mm.
Cette table pneumatique à vide sur support basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. Le support doit être fixé à l'aide de pinces (non comprises). Ce support est spécialement conçu pour se connecter au modèle SVN450 ou SVN460. Pas de connexion directe au compresseur comme le modèle SVN450 ou SVN460.
Weight
2 kg
1 kg
0,25 kg
0,05 kg
3 kg
0,300 kg
0,3 kg
1 kg
2,70 kg
0,05 kg
0,01 kg
0,05 kg
0,500 kg
0,05 kg
0,5 kg
0,05 kg
1 kg
5 kg
3 kg
ND
1 kg
Dimensions
ND
ND
ND
ND
ND
10,7 × 10 cm
12 × 10 cm
9 cm
45 cm
0,4 cm
ND
0,4 cm
380 cm
0,5 cm
ND
0,4 cm
ND
ND
ND
ND
ND
Additional information
Poids
2 kg
Poids
1 kg
Diamètre lame de scie
150mm
Diamètre de l\' arbre
20mm
Epaisseur dent
2,6mm
Epaisseur lame de scie
1,6mm
nombre de dents
24, 40, 48
Poids
0,25 kg
Pièces par emballage
100
Longueur
32mm
Matériel
Acier inoxydable
Poids
0,05 kg
Diamètre
19mm
Longueur
90mm
Queue
10x60mm
Poids
3 kg
Puissance
550W
onbelast toerental
300 – 3200 rpm
slaglengte
26mm
schuine hoek
0° 15° 30° 45°
materialen
wood 80 mm
steel 5 mm
non-ferrous metals 20 mm
hard aluminium 15 mm
ceramics 10 mm
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy