La mèche à chevilles fonctionne avec la gabarit perçage de chevilles standard pour créer des chevilles parfaitement adaptées à votre projet. Cette mèche spécialement conçue s'adapte à n'importe quelle perceuse et s'insère dans le guide de perçage en acier trempé du gabarit de perçage de chevilles pour produire des chevilles au diamètre correct pour les trous de poche Kreg HD (Heavy Duty).
This tenoning cart with tenoning hood is available as an option with the TT320N2CU and TT410N2CU combination machines.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDM2500.
The TT3000KSM has a 3000 x 150 mm sanding belt that can be tilted 45 degrees, a separately driven oscillator and a grooved infeed ruler for veneer sanding. The height of the worktop is adjustable (210 mm) and an extraction outlet (80/100 mm) is provided on both sides.
This multi-adjustable support for wood lathes can be adjusted both in height and in width from 603 mm to 901 mm.
Zaaglint met lengte 4670mm om te gebruiken op de TT50BS of TT61BS lintzaagmachine van Tendotools. Dit zaaglint beschikt over 14 TPI (tanden per inch) en heeft een breedte van 27mm. Dit bimetaal zaaglint is erg sterk en is naast hout of kunststoffen zelfs geschikt om lichte metaallegeringen of bijvoorbeeld aluminium te verzagen. Het is ook aan te raden deze zaaglinten te gebruiken bij langdurig gebruik op harde houtsoorten.
Set profielmessen hoogte 40mm Nr. 0008 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Square carbide plaque for roughing gouge 11 mm
With this connection kit you can easily connect different guide rails of the plunge-cut saws TT55 and TT85.
Set profielmessen hoogte 50mm Nr. 2009 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
This pneumatic vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVN450 or SVN460 model. No direct connection to the compressor as model SVN450 or SVN460.
Set of profile knives of height 40mm Nr. 0009 suited for universal moulding blocks. Used for moulding of wood at low costs. The steel alloy with 16% cobalt guarantees a high quality cut and a comfortable cutting process.
Massief houten Pocket-Hole pluggen, standaardafmeting. Deze pluggen werden speciaal ontworpen om extra stevige verbindingen aan te brengen. De Pocket-Hole Jigs zorgen ervoor dat deze pluggen naadloos weggewerkt worden.
Universal wheel kit to be used under your woodworking machine. Maximum load capacity 600kg on a maximum size of 750x860mm.
Vane d'arrêt à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. Fileté d'un côté pour le flexible d'extraction et de l'autre avec un raccord quick qui s'adapte à d'autres accessoires PVC de Ø 100 mm.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Reducer with diameter 125-100mm to be used with the Air Flux dust extractors.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. The smaller bearing provides an upright standing side to the rounding. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container.
Attention: this hand gluer comes standard with a rubber roller, suitable for vinyl (white) adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T).
Practical and reliable support that makes it possible to install panels, doors, etc... to be held in place. For pieces with a maximum thickness between 6mm and 80mm. Thanks to its robust design, the SP270R easily supports pieces up to 80kg. The support is very easy to use. Secure your piece by placing it in the clamp and pressing it down. To unload it again, use the foot pedal.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Foret forstner avec queue cylindrique pour percer des charnières invisibles dans le plupart des bois ou panneaux. Cette mèche charnière de haute qualité avec pointe de centrage, deux faces de découpage en widia et deux guides en widia vous assure une finition parfait de tous vos trous. Rotation à droite uniquement.
Cette mèche est disponible en deux longueurs
Deze tafelondersteuning is gemaakt uit nodulair gietijzer gecoat met epoxyverf.
Het ideale hulpmiddel om je klemmateriaal een stevige basis te geven.
Voorzien van stalen vlinderschroef. Past op alle PIHER klemmen met uitzondering van Mod. XXL.
Max. opening 11 mm.
Set profielmessen hoogte 40mm Nr. 0045 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0066 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Content
La mèche à chevilles fonctionne avec la gabarit perçage de chevilles standard pour créer des chevilles parfaitement adaptées à votre projet. Cette mèche spécialement conçue s'adapte à n'importe quelle perceuse et s'insère dans le guide de perçage en acier trempé du gabarit de perçage de chevilles pour produire des chevilles au diamètre correct pour les trous de poche Kreg HD (Heavy Duty).
This tenoning cart with tenoning hood is available as an option with the TT320N2CU and TT410N2CU combination machines.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDM2500.
The TT3000KSM has a very stable and strong machine frame that eliminates vibration. The sanding unit can be tilted to 45 degrees. The height of the work surface is adjustable (210 mm) so that the 3000 x 150 mm sanding belt is fully utilized. The machine is equipped with a contour table for sanding curves. It has a grooved infeed ruler for veneer sanding and edge sanding on 1 side of the machine. The tension rollers are equipped with springs to compensate for the stretching of the sanding belt. The sanding belt has grit 100 as a standard, but is also available with grit 60, 80 and 150.
This machine has a unique advantage: by folding down the cast iron tables completely, you create a sanding unit that is ideally suited to veneer sanding.
This machine is suitable for sanding wood, plastic and similar materials. An extraction output (80/100 mm) is provided on both sides, so that the dust is optimally discharged. The front swivel wheels facilitate the adjustment of the height of the work table and the tilting of the sanding unit.
The oscillation of the sanding belt is driven by a separate motor.
This multi-adjustable support for wood lathes can be adjusted both in height and in width from 603 mm to 901 mm.
Zaaglint met lengte 4670mm om te gebruiken op de TT50BS of TT61BS lintzaagmachine van Tendotools. Dit zaaglint beschikt over 14 TPI (tanden per inch) en heeft een breedte van 27mm. Dit bimetaal zaaglint is erg sterk en is naast hout of kunststoffen zelfs geschikt om lichte metaallegeringen of bijvoorbeeld aluminium te verzagen. Het is ook aan te raden deze zaaglinten te gebruiken bij langdurig gebruik op harde houtsoorten.
Set profielmessen hoogte 40mm Nr. 0008 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Square carbide plaque for roughing gouge 11 mm
With this connection kit you can easily connect different guide rails of the plunge-cut saws TT55 and TT85.
Fits both in the 800 mm and in the 1400 mm guide rail.
Set profielmessen hoogte 50mm Nr. 2009 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
This pneumatic vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVN450 or SVN460 model. No direct connection to the compressor as model SVN450 or SVN460.
Set of profile knives of height 40mm Nr. 0009 suited for universal moulding blocks. Used for moulding of wood at low costs. The steel alloy with 16% cobalt guarantees a high quality cut and a comfortable cutting process.
Massief houten Pocket-Hole pluggen, standaardafmeting. Deze pluggen werden speciaal ontworpen om extra stevige verbindingen aan te brengen. De Pocket-Hole Jigs zorgen ervoor dat deze pluggen naadloos weggewerkt worden.
Universal wheel kit to be used under your woodworking machine. Maximum load capacity 600kg on a maximum size of 750x860mm.
Vane d'arrêt à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. Fileté d'un côté pour le flexible d'extraction et de l'autre avec un raccord quick qui s'adapte à d'autres accessoires PVC de Ø 100 mm.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Reducer with diameter 125-100mm to be used with the Air Flux dust extractors.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. The smaller bearing provides an upright standing side to the rounding. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. Simply press the trigger to run the glue over the roll. Using this trigger you will always obtain the right amount of glue for your project. Thanks to the support, the hand gluer can easily be put away. For cleaning, you can keep this adhesive under water without risk of damage.
Attention: this adhesive comes standard with a rubber roller, suitable for vinyl adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T).
Practical and reliable support that makes it possible to install panels, doors, etc... to be held in place. For pieces with a maximum thickness between 6mm and 80mm. Thanks to its robust design, the SP270R easily supports pieces up to 80kg. The support is very easy to use. Secure your piece by placing it in the clamp and pressing it down. To unload it again, use the foot pedal.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. The router bit is solid carbide, with special micrograin finishing for best performance. Thanks to these combined qualities the router bit delivers high quality results for all your projects and a long working life. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Foret forstner avec queue cylindrique pour percer des charnières invisibles dans le plupart des bois ou panneaux. Cette mèche charnière de haute qualité avec pointe de centrage, deux faces de découpage en widia et deux guides en widia vous assure une finition parfait de tous vos trous. Rotation à droite uniquement.
Cette mèche est disponible en deux longueurs
Deze tafelondersteuning is gemaakt uit nodulair gietijzer gecoat met epoxyverf.
Het ideale hulpmiddel om je klemmateriaal een stevige basis te geven.
Voorzien van stalen vlinderschroef. Past op alle PIHER klemmen met uitzondering van Mod. XXL.
Max. opening 11 mm.
Set profielmessen hoogte 40mm Nr. 0045 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0066 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Weight
0,22 kg
10 kg
3 kg
400 kg
ND
0,5 kg
0,05 kg
ND
0,5 kg
0,05 kg
1 kg
0,05 kg
2 kg
5 kg
0,5 kg
0,05 kg
0,05 kg
0,05 kg
2 kg
3 kg
0,05 kg
0,05 kg
0,3 kg
0,05 kg
0,05 kg
Dimensions
ND
ND
30 × 26 × 7 cm
1800 × 900 × 1350 cm
ND
ND
0,4 cm
ND
ND
0,5 cm
ND
0,4 cm
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
0,4 cm
0,4 cm
Additional information
Poids
0,22 kg
Poids
10 kg
Poids
3 kg
Dimensions
30 × 26 × 7 cm
Max. hoogte werkstuk
63mm
Max. breedte werkstuk
270mm
Poids
400 kg
Dimensions
1800 × 900 × 1350 cm
Inclinaison
45°
Grain
K60, K80, K100, 150
Table de travail
330 x 330 mm, 960 x 350 mm
Bande à poncer
3000 x 150 mm
Moteur
0,33 ch, 4 CV
Voltage
400 V
Oscillatie
Yes
Bandsnelheid
20 m/sec
Poids
0,5 kg
Longueur
4670mm
Largeur
27mm
Dikte
0,90mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,5 kg
Poids
0,05 kg
Dimensions
0,5 cm
Poids
1 kg
Afmetingen werkvlak
150x150mm
Force de fixation
800gr/cm² à 6 bar
Werkdruk
5,5-7 bar
Luchtverbruik bij 5,5 bar
28l/min
Poids
0,05 kg
Dimensions
0,4 cm
Poids
2 kg
Poids
5 kg
Poids
0,5 kg
Diamètre
100mm
Poids
0,05 kg
Diamètre
11mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2
Poids
0,05 kg
Diamètre
100mm, 125mm
Poids
0,05 kg
Diamètre
28,6mm
Longeur de coupe
13mm
Longueur
51mm
Rayon
R8
Queue
8mm
Faces de coupe
2
Poids
2 kg
Breedte lijmrol
122mm, 180mm
Inhoud lijmbak
1kg, 1,4kg
Poids
3 kg
Max. dikte van het stuk
6-80mm
Max. draagkracht
80kg
Poids
0,05 kg
Diamètre
5mm
Longeur de coupe
11mm, 16mm
Longueur
51mm, 55mm
Faces de coupe
2+1
Poids
0,05 kg
Diamètre
25mm
Longueur
90mm, 120mm
Queue
10x100mm, 10x60mm
Poids
0,3 kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Dimensions
0,4 cm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy