| Description | Lame de scie avec 28 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande. | This pneumatic vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications.
Using the rubber seals included as standard, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling. | A nailing and stapling machine that can be adjusted by means of electronic control. Thanks to the ergonomic, well-balanced housing, this powerful tool is a handy helper during your jobs. Both staples (6 -14mm) and nails (max 16cm) can be placed with this device. There is a double safety switch on the device. The charger has a capacity of 83. | Caoutchouc de rechange pour pompe à ventouse. Convient à la pompe de toutes les ventouses PIHER. | This easy-to-handle chisel is used to reduce the rough workpiece. | This transport handle is standard equipped with a clamp which makes this handle suitable for multiple functions. Can be used as an edge press, corner press or transport handle. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. As an edge press you can use the PC81U on straight panels as well as concave or convex panels. As a corner press, this handle becomes the ideal tool for making frames, for example. The clamp is detachable and by changing the position of the handle, the PC81U can easily be converted into a transport handle. Suitable for panels between 0mm and 46mm thick. |
| Content | Lame de scie avec 28 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande. | This pneumatic vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The table itself must be fixed with screws in the provided holes. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, you can use multiple modules to prevent sagging. The optional distributor (ref. 5046350) allows you to connect up to five basic pneumatic modules at the same time. In this way you can operate them synchronously. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling. | A nailing and stapling machine that can be adjusted by means of electronic control. Thanks to the ergonomic, well-balanced housing, this powerful tool is a handy helper during your jobs. Both staples (6 -14mm) and nails (max 16cm) can be placed with this device. There is a double safety switch on the device. The charger has a capacity of 83. | Caoutchouc de rechange pour pompe à ventouse. Convient à la pompe de toutes les ventouses PIHER. | This easy-to-handle chisel is used to reduce the rough workpiece. This is the first tool you use to obtain a round shape.
| This transport handle is standard equipped with a clamp which makes this handle suitable for multiple functions. Can be used as an edge press, corner press or transport handle. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. As an edge press you can use the PC81U on straight panels as well as concave or convex panels. As a corner press, this handle becomes the ideal tool for making frames, for example. The clamp is detachable and by changing the position of the handle, the PC81U can easily be converted into a transport handle. Suitable for panels between 0mm and 46mm thick. |
| Additional information |
| Poids |
1 kg |
| Diamètre lame de scie |
400mm
|
| Diamètre de l\' arbre |
30 mm
|
| Epaisseur dent |
3,5mm
|
| nombre de dents |
28
|
|
| Poids |
0,325 kg |
| Dimensions |
16 × 20 × 2,2 cm |
| Afmetingen werkvlak |
150x150mm
|
| Force de fixation |
800gr/cm² à 6 bar
|
| Werkdruk |
5,5-7 bar
|
| Luchtverbruik bij 5,5 bar |
28l/min
|
|
|
| Poids |
0,01 kg |
| Pour les articles |
30100, 30110, 30131, 30132
|
|
| Largeur de la lame |
19 mm
|
| Profondeur de la lame |
10 mm
|
| Longueur utile de la lame |
160 mm
|
|
| Poids |
0,65 kg |
| Max. Draagkracht |
70kg
|
| Paneeldikte |
0-46mm
|
|
