Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Modèle de salle d'expo
Les scies de table Harvey HW110E ont déjà prouvé qu'elles étaient l'une des tables de sciage de la plus haute qualité dans le monde entier, avec plus de 30 000 clients satisfaits. Les scies à table se caractérisent par une conception et une ingénierie de pointe, un châssis robuste et un système d'entraînement puissant. Apparence et finition rayonnantes, précision et stabilité exceptionnelles, fonctionnement souple et fonctionnalités conviviales. Cette série comprend une table de sciage classique 3PK inclinable à gauche avec un système avancé de changement de coin de fendage ou une table de sciage à logement en queue d'aronde 5,5PK à usage intensif pour les coupes industrielles. Tous ces modèles sont équipés pour être utilisés avec le système Dado (lames de scie à rainures réglables pour couper les rainure et entre autres).
Screw for carbide plaque
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
The BOW FeatherPRO featherboard features an innovative use of high-density EVA Foam / foam combs and clamping system that increase control of insertion, dramatically improve recoil and protects your wood better from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. Ideal for table saws, routers, guides
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
Vane d'arrêt à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. Avec filetage sur les deux côtés.
Een werkstuk klem je goed vast met een bankschroef. Sparky biedt u de oplossing met hun stevige bankschroeven, volledig in gietijzeren vorm ontworpen, wat de stevigheid ten goede komt. Met behulp van deze bankschroef kan je je werkstukken op verschillende manieren bewerken. De bankschroef kan versteld worden middels de draaispil, deze wordt bediend door een wringstaaf. De spanlakken zijn voorzien van een rubberen bescherming, zodoende zal uw materiaal geen schade oplopen bij de het vastzetten. De bankschroef is voorzien V-vormige groeven, ter ondersteuning van verticale en horizontale bevestiging van ronde stukken.
De smalle nylon borstel Duro-Nyl is de ideale oplossing voor moeilijk bereikbare plaatsen. Deze is uitgevoerd in korrel 60.
Deze borstels dienen altijd gebruikt te worden in combinatie met de afstandsring Duro-Spacer. Dit is een aluminium afstandsring om de unieke smalle borstel te kunnen plaatsen op uw Durotec structureermachine.
DEMO MODEL, WITH HEIGHT-ADJUSTABLE SAW BLADE
These portable and compact planing and sawing machines 230V are unique on the market and one of a kind. 200mm planing width and 97mm cutting height in one machine. Equipped with an induction motor 2.8 HP.
This spacer ring is designed for the use of the narrow nylon brush on the Durotec structuring/brushing machine. Narrow brushes are the ideal solution for hard-to-reach areas.
Scheid grote houtsnippers uit uw systeem voordat ze uw afzuiging bereiken. Een paar plastic elleboog- en koppelingscomponenten dienen als invoer- en uitvoerpunten wanneer u ze installeert aan beide uiteinden van een vat, bak of andere opvang die u wilt gebruiken om grote houtsnippers op te vangen. Dit systeem voorkomt slijtage aan je afzuiging en je hoeft hem minder vaak te legen. De twee koppelingscomponenten passen op een standaard 100 mm afzuigslang.
Deze set wordt geleverd inclusief een mal om de juiste gaten te maken in uw opvangbak voor montage van de twee aansluitpunten.
Inspiratie nodig? Bekijk het bouwplan bij downloads en maak makkelijk je eigen opvangbak.
Wheel kit to mount on different machines of our Comfort Line range. Use this wheel kit to easily move your band saw, panel saw, flat bench or toupee through the workshop. With detachable lever for easy handling.
Powerful belt sander for levelling and rough work. The LB31EA sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. Equipped with an integrated dust extractor and dust bag to allow the user to work comfortably and cleanly.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece.
Also available with connection for dust extraction as model LB31E.
Une machine à clouer et à agrafer qui peut être réglée au moyen d'une commande électronique. Grâce à son boîtier ergonomique et bien équilibré, cet outil puissant vous sera d'une aide précieuse lors de vos travaux. Cet appareil permet de poser aussi bien des agrafes (6 à 14 mm) que des clous (16 cm maximum). L'appareil est doté d'un double interrupteur de sécurité. Le chargeur a une capacité de 83.
Cette fraise est conçue pour fraiser facilement et rapidement des bords droits ou des rainures. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois. Facile à utiliser en utilisant le roulement à billes comme guide. Cette fraise est parfaitement adapté au traitement des matériaux stratifiés ou des feuilles de placage.
Using this easy upgrade you are able to elavate the filtration of your AF1020 Dust Extractor up to 30 times, significantly improving the air quality in your workshop. The high quality folded filter catches dust and finer particles down to 1µm, compared to 30µm for the standard filter and 5µm for the fibre filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove all dust piled up in the folds of the filter, the dust will fall down in the PVC waste bags below.
Content
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Les scies de table Harvey HW110E ont déjà prouvé qu'elles étaient l'une des tables de sciage de la plus haute qualité dans le monde entier, avec plus de 30 000 clients satisfaits. Les scies à table se caractérisent par une conception et une ingénierie de pointe, un châssis robuste et un système d'entraînement puissant. Apparence et finition rayonnantes, précision et stabilité exceptionnelles, fonctionnement souple et fonctionnalités conviviales. Cette série comprend une table de sciage classique 3PK inclinable à gauche avec un système avancé de changement de coin de fendage ou une table de sciage à logement en queue d'aronde 5,5PK à usage intensif pour les coupes industrielles. Tous ces modèles sont équipés pour être utilisés avec le système Dado (lames de scie à rainures réglables pour couper les rainure et entre autres).
Screw for carbide plaque
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
The BOW FeatherPRO featherboard features an innovative use of high-density EVA Foam / foam combs and clamping system that increase control of insertion, dramatically improve recoil and protects your wood better from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. Ideal for table saws, routers, guides
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
Vane d'arrêt à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. Avec filetage sur les deux côtés.
Wie zijn werkstuk wil klemmen, gebruikt best kwaliteitsvolle klemmen. Sparky biedt u de oplossing, volledig in gietijzeren vorm ontworpen, wat de stevigheid ten goede komt. Met behulp van deze bankschroef kan je je werkstukken op verschillende manieren bewerken. De bankschroef kan versteld worden middels de draaispil, deze wordt bediend door een wringstaaf. De spanlakken zijn voorzien van een rubberen bescherming, zodoende zal uw materiaal geen schade oplopen bij de het vastzetten. De bankschroef is voorzien van V-vormige groeven, ter ondersteuning van verticale en horizontale bevestiging van ronde stukken.
DURONYL nylon borstel voor het structureren van houten oppervlakken. Door de bewerking met de borstel wordt de karakteristieke houtstructuur naar voren gehaald. De borstels verwijderen vooral het zachtere hout van de meer recente jaarringen en laten het hardere hout van de oudere jaarringen eerder intact. Geborstelde houten oppervlakken worden o.a. bij de vervaardiging van rustieke meubels, de inrichting van rustieke cafés en restaurants (wand- en plafondbekleding) of bij balken gebruikt.
These portable and compact planing and sawing machines 230V are unique on the market and one of a kind. Compared to all other smaller machines, they work with very powerful induction motors.
An induction motor has 30% more power than a carbon brush motor and is more than 40% quieter. Moreover, it is maintenance-free as no carbon brushes need to be replaced. Furthermore, they are driven in an industrial way by means of poly belts instead of classic V-belts. The construction of the frame is also very unique and robust, as 3.5 mm thick sheet steel is used. This together guarantees excellent performance, but also optimal resistance for your machine.
Very fast change from planer to sawing function by repositioning the belt.
The uniqueness of this is that these models work with a separate knife block for each operation. The independent drive provides the ideal speed for planing and sawing, so the planer and saw also rotate separately for safety. Thanks to the micro-lifting system of the planing tables, the planing depth can be set very accurately and smoothly, but the tables can also be closed completely in a quick way. By fully closing the tables, the saw table has a large work surface. This Universal 2.0 has a very clear and accurate scale for each setting.
The guide can be blocked both in front of and behind the work table, which guarantees stable and precise work. It can also be set at an angle with very clear reading, and this for both planing and sawing. For the sawing machine there is also a miter gauge with clear reading. The machine is designed to work with grooving cutters up to 10mm thickness.
The high-quality construction of these compact machines such as thick sheet steel, direct drive, induction motors, high-quality ball bearing, large and robust set and rotary handles give this machine an enormous comfort with excellent performance and an optimal service life.
The portable multifunctional woodworking machine is standard equipped with: clamping device, saw guide, saw blade with splitting wedge, ruler, cover plate, handle (thumbscrew), miter guide, insert, planer knives in knife block, bracket, operating manual.
This spacer ring is designed for the use of the narrow nylon brush on the Durotec structuring/brushing machine. Narrow brushes are the ideal solution for hard-to-reach areas.
Scheid grote houtsnippers uit uw systeem voordat ze uw afzuiging bereiken. Een paar plastic elleboog- en koppelingscomponenten dienen als invoer- en uitvoerpunten wanneer u ze installeert aan beide uiteinden van een vat, bak of andere opvang die u wilt gebruiken om grote houtsnippers op te vangen. Dit systeem voorkomt slijtage aan je afzuiging en je hoeft hem minder vaak te legen. De twee koppelingscomponenten passen op een standaard 100 mm afzuigslang.
Deze set wordt geleverd inclusief een mal om de juiste gaten te maken in uw opvangbak voor montage van de twee aansluitpunten.
Inspiratie nodig? Bekijk het bouwplan bij downloads en maak makkelijk je eigen opvangbak.
Wheel kit to mount on different machines of our Comfort Line range. Use this wheel kit to easily move your band saw, panel saw, flat bench or toupee through the workshop. With detachable lever for easy handling.
Powerful belt sander for levelling and rough work. The LB31EA sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. The machine is equipped with stoppers in high quality carbide (widia) to prevent wear and tear on the housing. Equipped with an integrated dust extractor and dust bag to allow the user to work comfortably and cleanly. Several sanding belts with different grit sizes are optionally available.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece.
Also available with connection for dust extraction as model LB31E.
Une machine à clouer et à agrafer qui peut être réglée au moyen d'une commande électronique. Grâce à son boîtier ergonomique et bien équilibré, cet outil puissant vous sera d'une aide précieuse lors de vos travaux. Cet appareil permet de poser aussi bien des agrafes (6 à 14 mm) que des clous (16 cm maximum). L'appareil est doté d'un double interrupteur de sécurité. Le chargeur a une capacité de 83.
Cette fraise est conçue pour fraiser facilement et rapidement des bords droits ou des rainures. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois. Facile à utiliser en utilisant le roulement à billes comme guide. Cette fraise est parfaitement adapté au traitement des matériaux stratifiés ou des feuilles de placage.
Using this easy upgrade you are able to elavate the filtration of your AF1020 Dust Extractor up to 30 times, significantly improving the air quality in your workshop. The high quality folded filter catches dust and finer particles down to 1µm, compared to 30µm for the standard filter and 5µm for the fibre filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove all dust piled up in the folds of the filter, the dust will fall down in the PVC waste bags below.
Weight
1 kg
240 kg
ND
0,05 kg
1 kg
1 kg
1 kg
0,5 kg
ND
0,3 kg
36 kg
0,300 kg
1 kg
2 kg
6,5 kg
1,1 kg
0,05 kg
8 kg
Dimensions
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
7,5 × 2 cm
ND
ND
ND
ND
ND
50 cm
Additional information
Poids
1 kg
Diamètre lame de scie
500mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
2,5mm
nombre de dents
56
Poids
240 kg
Voltage
230 V
Moteur
3 CV
Diamètre lame de scie
250mm
Profondeur de coupe 45°
50mm
Profondeur de coupe 90 °
70mm
Vitesse de la lame de scie
4150
Max. largeur DADO
15mm
Connexion d\'extraction
100 mm
Max. largeur à gauche
305 mm
Max. largeur à droite
750 mm
T-slots
2
Hauteur du plan de travail
860mm
Table de travail
508 x 685mm
Poids
0,05 kg
Diamètre
48,7mm
Longeur de coupe
26mm
Longueur
72mm
Rayon
R18
Queue
12mm
Faces de coupe
2
Poids
1 kg
Diamètre lame de scie
125mm, 150mm, 180mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
5,0mm
Epaisseur lame de scie
4,0mm
nombre de dents
12, 18, 24
Poids
1 kg
Poids
1 kg
Poids
0,5 kg
Diamètre
100mm
Poids
0,3 kg
Grain
K60
Diamètre
∅115 x 25 SMALL
Poids
36 kg
Moteur
2.8 CV
Profondeur de coupe 90 °
97 mm
Largeur de rabotage
200 mm
Diamètre lame de scie
250mm
Voltage
230 V
Poids
0,300 kg
Dimensions
7,5 × 2 cm
Poids
1 kg
Diamètre
100mm
Poids
2 kg
Poids
6,5 kg
Puissance
1200W
Afmetingen schuurband
690x100mm
Schuuroppervlakte
175x100mm
Bandsnelheid
420m/min
Poids
1,1 kg
Poids
0,05 kg
Diamètre
6,4mm
Longeur de coupe
19mm
Longueur
57mm
Queue
8mm
Faces de coupe
1
Poids
8 kg
Dimensions
50 cm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy