Les meuleuses droites sont idéales pour les travaux de meulage dans les endroits difficiles d'accès. Le broyeur droit de Sparky est léger et compact, ce qui le rend facile à manipuler. La meuleuse droite est branchée sur le secteur. Ce modèle se prête parfaitement au fraisage, au polissage et à la gravure. Indispensable pour les travaux de précision.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Lame de scie avec 20 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
The Ultralight spring foams are suitable for the FeatherPRO and FeatherDUO featherboards. Ultralight springs are less stiff than standard springs. This is achieved by a thinner neck on the spring hinge. Set of 2 pieces.
LAATSTE MODEL!
Deze steun met kogels beschikt over 13 kogels en heeft een afmeting van 45 cm x 28 cm.
De hoogte is instelbaar van 64 cm tot 108 cm.
SHOWROOM MODEL
De TT305SLX is de grootste kap- en verstekzaag met trekfunctie op de markt. Ze is uitgerust met een geruisloze inductiemotor van 1600 W die geen onderhoud nodig heeft (wat een groot voordeel is ten opzichte van de koolborstelmotor in de kleinere modellen) en heeft een trekfunctie tot 350 mm, met een zaaghoogte tot 107 mm. De zaag kan in 2 richtingen tot 48° gekanteld worden.
This aluminum profile of 3 meters can be used as a guide on our roller beds and tables.
Antistatic hose length 15 meter diameter 100 mm. To be used in combination with the Dust Extractors by Air Flux.
Ce guide de position multifonctionnel remplace facilement tous les autres guides ou moules. Le T multi guide est un outil indispensable pour la fabrication de meubles, d'armoires,... Le guide de perçage de haute précision vous permet d'effectuer correctement tous les perçages à une distance de 32 mm (ou plus). Utilisez ce guide pour : les poignées des portes et des glissières, les trous pour les étagères, les charnières ou les guides de tiroir. À l'aide des rallonges, vous pouvez également allonger le guide afin de réaliser des perçages multiple, entraxe 32 mm. Ces extensions sont incluses en standard dans ce kit.
Le guide de base a une longueur de 320 mm et est équipé d'un trou central et de deux trous réglables en acier trempé. Vous pouvez étendre cette longueur jusqu'à un maximum de 810 mm en utilisant les extensions à perçage multiple. Livré en standard avec une mèche de Ø5mm.
Download leaflet
The Itamac Panthera series offers high-quality and safe table saws for precise cuts. The HW110SE series features a powerful poly-belt drive system and a heavy-duty dovetail motor housing, ensuring a vibration-free and accurate saw table. The Panthera series is available in 230V-3PK (S7 model), three-phase 400V-5.5PK and even a single-phase 230V-4PK (S9 model). Itamac is the only manufacturer to offer this type of single-phase table saw with a 4 HP motor. The standardised T-slots enable precise cuts with the supplied mitre gauge.
Delivered standard with "BOW" Feather PRO featherboard that increase control and reduce kickback as well as high-quality saw blades by Sistemi Klein (made in Italy) for stability, reduced vibration and longer life.
Itamac also helps invest in your health: you will receive a 30% discount on the Orca S-17 floating dust extractor for efficient dust extraction and better health with the purchase of any Panthera table saw! (see promotion)
Set profielmessen hoogte 40mm Nr. 0003 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Virutex brand wooden biscuits, packaged per box of 1000 pieces. Make your choice for number 0, 10 or 20.
Modèle de salle d'expo
Etabli en hêtre massif avec une surface de travail de 120 mm d'épaisseur. L'établi idéal pour le professionnel ou pour votre atelier à domicile. L'établi est équipé en standard de deux étaux à double broche en fonte. Cette double broche garantit que l'étau est toujours serré avec précision et uniformément. L'ensemble de l'établi est déjà huilé à la livraison. L'ensemble standard de cet établi comprend une paire de poteau cylindrique (Ø19mm) en acier plein. Hauteur de travail fixe de 900 mm. Des armoires de rangement sur mesure pour le montage dans le châssis sont disponibles séparément.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
This handy tool allows you to adjust your planing knives or planing bits quickly, easily and precisely. With the help of the magnets, the tool fixes itself on the shaft. You can then place the planing knive in the correct position in no time at all. Standard delivery in a neat wooden case.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
ShowroommodelMET GRATIS ACCESSOIRES:+ FREESAS VOOR BOVENFREZEN 8, 10 & 12 MM+ EXTRA FREESAS 20 MM+ VERRIJDBAAR ONDERSTEL+ VERSTEKGELEIDER
De Itamac Eagle series zijn hoogwaardige freesmachines, specifiek ontwikkeld voor professionele freestoepassingen. Ontworpen met het oog op zowel functionaliteit als comfort, beschikt deze machine over alle mogelijke functies voor een freesmachine uit deze klasse. Voorzien van een extra zwaar chassis, een massief gietijzeren beschermkap met aluminium geleiders en fijnregeling. De krachtige 230V motor levert 3PK en zorgt ervoor dat deze tafel bijna elke freesopdracht aankan. De Itamac Eagle HW300E heeft een as van 30mm. Mits de optioneel verkrijgbare frees as en spantangen kan de machine ook ingezet worden om te profileren met behulp van bovenfrezen. De grote gietijzeren tafel garandeert de nodige stabiliteit tijdens het werken. Inzetbaar op vier snelheden, met gecentraliseerd controlepaneel boven de machine.
The ITAMAC ST1400 sliding table can be easily installed on most saw tables, spindle machines, etc. to greatly increase capacity. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDM2500.
OUTLET, verpakking licht beschadigd
De Timber Yard Pro TT315 is een krachtige tafelcirkelzaagmachine met een inductiemotor van 4 pk en hardmetalen zaagblad, die voorzien is van een verstekgeleider en een gegalvaniseerde werktafel.
The adjustable roller stand supports large workpieces up to 100 kg. Chrome plated roller with ball bearings on a Heavy-Duty base. The base has four points for leveling the roller stand. It is quick and easy to change from roller to ball bed. Height adjustment from 77cm - 116cm. The roller stand can be quickly folded for storage when not in use.
Set profielmessen hoogte 40mm Nr. 0055 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Reserve trigger voor alle PIHER zuignappen die gebruik maken van een hendel. Inclusief metalen pen en plaatje.
Cette fraise à percer et affleurer peut être utiliser pour facilement percer et couper des ouvertures dans les plans de travail laminés. Le point 'V' peut facilement percer la couche supérieure des stratifiés. Le face à couper en carbide vous donne une finition parfait pour tous votre projets. La base de la fraise agit comme un guide suiveur.
Complete set in PVC box, chromed design, with a handy sprocket wrench and 4 sets of chucks
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Schuurband voor dubbele cilinderschuurmachine TT635 en TT660 - 25 m x 100 mm
Portable edge bander PEB250+ mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The model PEB250+ has speed and temperature control. Table equipped with holder for rolls and automatic end trimmer. In addition, this table has an edge trimmer for edge bands up to 1mm.
The edge bander PEB250TRM, like all other Virutex models, is equipped with a patented Teflon® coated glue pot. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain.
Schuurdisc voor schuurmachine TT915 - Diameter 150 mm
Modèle de salle d'expo
La Timber Boy TT315 est une scie de table puissante avec un moteur à induction de 2,6 ch et une lame en carbure de tungstène, qui est équipée d'un guide d'onglet et d'une table de travail galvanisée.
This abrasive planer from Virutex is easy to use and delivers fast & efficient results on large, round surfaces. The machine has excellent results on any surface coated with paint, resin, varnish or laminated panels. Easy to use on different surfaces such as wood (also against the grain) or sandwich panels. A sanding sleeve with sanding roller grain 50 is fitted as standard. Sanding rolls with other grit sizes are available on request. No additional tools are required to replace the sanding rollers.
Particularly useful for working in shipyards, where fibreglass, carbon fibre and kevlar resins are used. Also for stripping gelcoat and paint layers. Because of its round sanding surface, this machine is indispensable in the manufacture of curved wooden parts such as stairs, etc.
Supplied as standard in a handy PVC case.
Lamellen van het merk Virutex, verpakt per doos van 1000 stuks. Maak uw keuze voor nummer 0, 10 of 20.
This electric vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to Virutex's SVE600 electric vacuum system (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications.
Using the rubber seals included as standard, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed.
Capot transparant avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La taille de l'ouverture du capot anti-poussière est de 200x200mm. Avec couverture.
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
Practical and reliable support that makes it possible to install panels, doors, etc... to be held in place. For pieces with a maximum thickness between 6mm and 80mm. Thanks to its robust design, the SP270R easily supports pieces up to 80kg. The support is very easy to use. Secure your piece by placing it in the clamp and pressing it down. To unload it again, use the foot pedal.
Connector à diamètre 100mm pour connecter deux pièces de tuyaux. A utiliser en combinaison avec les systèmes d'aspiration d'Air Flux.
ShowroommodelWITH FREE ACCESSORIES:+ SPINDLE FOR ROUTERS 8, 10 & 12 MM+ ADDITIONAL SPINDLE 20 MM+ MOBILE BASE+ MITRE GUIDE
The Itamac Eagle series are high-quality spindle moulding machines, specifically developed for professional routing applications. Designed with both functionality and comfort in mind, this machine has every possible function for a spindle moulder in this class. Equipped with an extra-heavy chassis, a solid cast-iron protective cover with aluminium guides and fine adjustment. The powerful 230V motor delivers 3HP and ensures that this table can handle almost any milling task. The Itamac Eagle HW300E has a 30 mm shaft. With the optionally available shaft and collets, the machine can also be used for profiling with the aid of router bits. The large cast iron table guarantees the necessary stability during work. Can be used at four speeds, with centralised control panel above the machine.
Deze kofferset bevat 4 vierkantgatboren voor het boren van vierkante gaten en het trekken van rechthoekige sleuven in zacht- en hardhout.
For connecting panels of 16 or 19mm thickness using dowels (Ø8mm) or screws. Work with a high precision & high quality finish, without the need for retrofitting. This position guide is suitable for drilling holes on the end, along the side, or at any position in the centre of the panel. Maximum width of the panel to place the guide is 630mm. Standard delivery with inserts for 16 mm boards, reducer rings and drill stop.
SHOWROOM MODEL, including necessary drills 5mm and 35mm!
This Multi Driller is the affordable solution for your line boring and cabinet hinges, with pneumatic operation! The machine has a powerful induction motor with a module of 5 line borings at a time with pneumatic control. This promotional package includes an adapter for line drilling and adapter for cabinet hinges.
Ideal for carpentry outside the workshop. Easy to place on any table without leaving traces. Gives more safety and precision in your work. The advanced design allows you to position the pieces in different ways, while always holding them securely. Its exceptional strength allows you to clamp metal pieces and carry out precision work. Strong, aluminium design with resin jaws to avoid damage to the workpiece.
La conception segmentée unique du tuyau lui permet de s'étendre, de se contracter et de se tordre à la forme qui convient le mieux à votre espace, puis de maintenir cette position, vous offrant des possibilités presque illimitées d'améliorer votre système de dépoussiérage. Le tuyau d'extraction a une longueur de 30 à 90 cm. La capacité de se plier, de se dilater ou de se contracter autour des obstacles pour s'adapter parfaitement dans un espace donné et conserver sa forme rend le tuyau FlexHold idéal pour les endroits exigus et les applications délicates de dépoussiérage où les tuyaux conventionnels ne fonctionnent tout simplement pas. Vous trouverez d'innombrables façons d'utiliser ce produit intelligent.
Whether you are fitting a new handle or dozens of drawer knobs, with the drilling template for cabinet hardware you no longer have to guess and work accurately and consistently every time. Thanks to the adjustable edge guide and the built-in measuring tape (with English and metric markings), it is easy to place knobs very precisely. In addition, the cabinet hardware jig has moveable and clickable drilling guides made of hardened steel that correspond to the most common distances between the holes for cabinet knobs and handles. The guides make it easy to drill straight, precisely positioned holes. The drilling jig is suitable for just about any type of button or handle, making it particularly versatile.
DEMO MODEL, ONE PIECE ONLYMODEL WITH PEB250
Portable edge bander PEB200+ or PEB250+ pre-mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edgebanding with thicknesses between 0.4-3mm and 10-62mm height. Choice of table with model PEB200+ or PEB250+. Both are suitable for gluing the same types of panels with one important difference. The model PEB250+ has speed and temperature control. The table is equipped with a holder for rolls and a manual end cutter.
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain.
SHOWROOM MODEL - UNUSED
The TT255UTC offers all the possibilities of a mitre saw and, thanks to its top table with guide, it is also ideally suited for cutting boards lengthwise. Its compactness and low weight make it particularly convenient to take with you when working on the move.
Set profielmessen hoogte 50mm Nr. 2062 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Un outil indispensable pour tout bricoleur. Un multi-outil avec lequel vous pouvez tout faire. Cette meuleuse d'angle (puissance 2500W) convient parfaitement aux travaux de ponçage lourds. Il est alimenté par le réseau électrique. La meuleuse d'angle peut être utilisée pour couper le métal, le bois et la pierre, mais vous pouvez également l'utiliser pour enlever la rouille et écailler le métal.
Modèle de salle d'expo
Etabli en hêtre massif avec une surface de travail de 120 mm d'épaisseur. L'établi idéal pour le professionnel ou pour votre atelier à domicile. L'établi est équipé en standard de deux étaux en fonte Bench11 avec la possibilité d'en installer un troisième (Bench 11Q). L'ensemble de l'établi est déjà huilé à la livraison. L'ensemble standard de cet établi comprend une paire de poteau cylindrique (Ø19mm) en acier plein. Hauteur de travail fixe de 900 mm. Des armoires de rangement sur mesure pour le montage dans le châssis sont disponibles séparément.
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
Set profielmessen hoogte 50mm Nr. 2054 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lame de scie à ruban d’une longueur de 4590 mm à utiliser sur la scie à ruban TT600 de Tendotools. Ce ruban de scie a 4 TPI (dents par inch) et a une largeur de 20mm. Cette lame en acier trempé "Flexback" est très adapté au sciage polyvalent. Utilisez cette lame de scie pour le bois et le plastique. Les dents de la lame de scie ont reçu un traitement thermique supplémentaire pour augmenter leur dureté. Cela permet de garder la ruban très souple et d'augmenter votre confort de coupe grâce à la dureté des dents.
Virutex brand biscuits, packaged per box of 500 pieces. Type Nr. 6
The Harvey ST1400 sliding table can be easily installed on most saw tables, milling machines, etc. to increase capacity enormously. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
Modèle de salle d'expo
Cette machine combinée compacte de la série Hobby+ est un sommet absolu dans sa catégorie de prix. La machine idéale pour tout menuisier qui travaille à la maison ou dans un petit atelier. Composé de deux machines différentes, ce Combi Workcentre vous offre trois fonctions : le sciage, le fraisage et le rabotage - dégauchissage Chaque fonction est commandée par un moteur à induction distinct de 230V. Cette machine combinée peut également être divisée en deux parties. Ainsi, vous pouvez utiliser séparément la table de scie + la fraiseuse et la rabot-dégau.
Le kit de roues WK600 est disponible en option. Attention! Le kit de roues ne peut être utilisé qu'avec les extensions.
Content
Les meuleuses droites sont idéales pour les travaux de meulage dans les endroits difficiles d'accès. Le broyeur droit de Sparky est léger et compact, ce qui le rend facile à manipuler. La meuleuse droite est branchée sur le secteur. Ce modèle se prête parfaitement au fraisage, au polissage et à la gravure. Indispensable pour les travaux de précision.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Lame de scie avec 20 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
The Ultralight spring foams are suitable for the FeatherPRO and FeatherDUO featherboards. Ultralight springs are less stiff than standard springs. This is achieved by a thinner neck on the spring hinge. Set of 2 pieces.
LAATSTE MODEL!
Deze steun met kogels beschikt over 13 kogels en heeft een afmeting van 45 cm x 28 cm.
De hoogte is instelbaar van 64 cm tot 108 cm.
De TT305SLX is de grootste kap- en verstekzaag met trekfunctie op de markt. Ze is uitgerust met een geruisloze inductiemotor van 1600 W die geen onderhoud nodig heeft (wat een groot voordeel is ten opzichte van de koolborstelmotor in de kleinere modellen) en heeft een trekfunctie tot 350 mm, met een zaaghoogte tot 107 mm.
Het gebruik van kogellagers op alle gewrichten zorgt voor een precieze draaibeweging van de tafel, de kop en het kantelsysteem. De zaag heeft een persgegoten aluminium behuizing en kan in 2 richtingen tot 48° gekanteld worden. De geruisloze, onderhoudsvrije inductiemotor van 1600 W met riemaandrijving levert een groot koppel en is achteraan geplaatst, waardoor de zaag een grote zaaghoogte (tot 107 mm) heeft. Het zaagblad heeft een diameter van 305 mm en 60 tanden. De zijsteunen zijn uitschuifbaar.
De TT305SLX is verder uitgerust met een horizontale D-handgreep.
This aluminum profile of 3 meters can be used as a guide on our roller beds and tables.
It features 2 flip stops and comes with mounting brackets for assembly on the roller bed or table.
Antistatic hose length 15 meter diameter 100 mm. To be used in combination with the Dust Extractors by Air Flux.
Ce guide de position multifonctionnel remplace facilement tous les autres guides ou moules. Le T multi guide est un outil indispensable pour la fabrication de meubles, d'armoires,... Le guide de perçage de haute précision vous permet d'effectuer correctement tous les perçages à une distance de 32 mm (ou plus). Utilisez ce guide pour : les poignées des portes et des glissières, les trous pour les étagères, les charnières ou les guides de tiroir. À l'aide des rallonges, vous pouvez également allonger le guide afin de réaliser des perçages multiple, entraxe 32 mm. Ces extensions sont incluses en standard dans ce kit.
Le guide de base a une longueur de 320 mm et est équipé d'un trou central et de deux trous réglables en acier trempé. Vous pouvez étendre cette longueur jusqu'à un maximum de 810 mm en utilisant les extensions à perçage multiple. Livré en standard avec une mèche de Ø5mm.
Itamac Panthera Series
The Harvest-group's HW110SE table saws have proven themselves for years as one of the highest quality saw tables in the world. These table saws exceed all expectations in terms of user-friendliness, safety and appearance. The precision-ground cast iron worktables, heavy duty dovetailed motor housing and powerful poly-belt drive system make the HW110SE series a low-vibration machine that lets you cut more precisely than ever before!
Safety and precision
Itamac uses high-quality and very powerful, noiseless induction motors for all their ranges. The Panthera S7 series is available in 230V - 3HP, while the Panthera S9 series is available in both three-phase 400V - 5.5HP and single-phase 230V - 4HP. Itamac stands out as the only manufacturer offering this type of saw table on single phase with a powerful 4 HP motor. This ensures you have enough power to cut through material effortlessly, no matter which series you choose.
Safety and precision are guaranteed with the Itamac Panthera series. The table saws feature standardised T-slots to the left and right of the saw blade where you can work very precisely with the supplied mitre guide with stop and adjustable positions. For clean work and optimum safety, the Panthera series includes the "BOW" Feather PRO featherboard as standard: a featherboard with replaceable springs in EVA foam that increases input control, drastically reduces kickback and better protects your wood from damage.
But, even the best cordless screwdriver needs the right screwdriver bit:
That is why Panthera saw tables come standard with very high-quality saw blades: one rip Itamac saw blade and one precision finishing saw blade Xtra Cut by Sistemi Klein, Made in Italy. These saw blades take cutting to a new level due to the special synthetic resin filled in the slots, which provides unprecedented stability and reduces vibration. This saw blade is ideally suited for cutting hardwood, double-sided veneer, laminate, MDF and thermoplastic boards. It is even ideal for cutting ALUCOBOND® or DIBOND®. These saw blades are equipped with carbide teeth from the original Ceratizit micrograin carbide, resulting in a lifetime that is up to 30% longer.
Dust collection and your health
Dust collection and your health also play an important role. On saw tables with quick-change or removal of the riving knife for groove cuts/working with dado saw blades, most of the dust is released above the worktable. Without a riving knife, there is no possibility of fitting a dust guard. Itamac has therefore developed the overarm floating dusthood "ORCA S-17". The transparent guard is easily adjustable in height and has a Ø 100 mm connection for efficient extraction. This large connection ensures optimum suction without loss of air speed, unlike all other small-diameter protective caps. Also, the large transparent surfaces of the protective cover ensure that you always have a full view of your workpiece, allowing you to work more safely and precisely compared to a small protective cover that often obstructs work.
ITAMAC helps invest in your health:
Although these saw tables are often operated without a riving, it is still very important to take dust collection seriously. Precisely for this reason, ITAMAC is offering a 30% discount on the Orca S-17 overarm floating dusthood when purchasing any Panthera saw table. It is important to realise that wood dust can be just as harmful as other types of dust, so proper dust extraction is vital for a safe and healthy working environment.
The saw table insert is designed for use at any cutting angle and can be easily removed thanks to the magnetic attachment in the table. Through fine adjustment, this plate can also be adjusted for a 100% flat transition with the cast-iron table top.
The saw blade can be tilted from 45° to -3° for false mitres and also tilts to the left for better visibility and no chance of kickback due to workpiece blocking. The table saw also has a quick-change riving knife system and is suitable for use with Dado groove saws (adjustable groove saw blades for cutting grooves up to +20 mm).
Operating the saw table is simple and user-friendly. The handwheels are full metal and heavy duty, and the industrial transmission ensures smooth operation of both saw height and blade tilt. Height and tilting adjustments are twice as fast as with a conventional system.
The Master-Rip fence is equipped with Teflon guide points, allowing it to guide very smoothly and can be adjusted at 6 points. In addition, the fence can be positioned either to the left or right of the saw blade. The fence can be easily locked by pushing the lever down, and the heavy-duty T-profile ensures a firm full-length lock. Cutting width can be clearly read on the double magnification scales in both millimetres and inches.
Set profielmessen hoogte 40mm Nr. 0003 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Virutex brand wooden biscuits, packaged per box of 1000 pieces. Make your choice for number 0, 10 or 20.
Etabli en hêtre massif avec une surface de travail de 120 mm d'épaisseur. L'établi idéal pour le professionnel ou pour votre atelier à domicile. L'établi est équipé en standard de deux étaux à double broche en fonte. Cette double broche garantit que l'étau est toujours serré avec précision et uniformément. L'ensemble de l'établi est déjà huilé à la livraison. L'ensemble standard de cet établi comprend une paire de poteau cylindrique (Ø19mm) en acier plein. Hauteur de travail fixe de 900 mm. Des armoires de rangement sur mesure pour le montage dans le châssis sont disponibles séparément.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
This handy tool allows you to adjust your planing knives or planing bits quickly, easily and precisely. With the help of the magnets, the tool fixes itself on the shaft. You can then place the planing knive in the correct position in no time at all. Standard delivery in a neat wooden case.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
De Itamac Eagle series zijn hoogwaardige freesmachines, specifiek ontwikkeld voor professionele freestoepassingen. Ontworpen met het oog op zowel functionaliteit als comfort, beschikt deze machine over alle mogelijke functies voor een freesmachine uit deze klasse. Voorzien van een extra zwaar chassis, een massief gietijzeren beschermkap met aluminium geleiders en fijnregeling. De krachtige 230V of 400V motor levert 3PK en zorgt ervoor dat deze tafel bijna elke freesopdracht aankan. De Itamac Eagle HW300E heeft een as van 30mm. Mits de optioneel verkrijgbare frees as en spantangen kan de machine ook ingezet worden om te profileren met behulp van bovenfrezen. De grote gietijzeren tafel garandeert de nodige stabiliteit tijdens het werken. Inzetbaar op vier snelheden, met gecentraliseerd controlepaneel boven de machine.
The ITAMAC ST1400 sliding table can be easily installed on most saw tables, spindle machines, etc. to greatly increase capacity. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDM2500.
De Timber Boy TT315 is een krachtige tafelcirkelzaagmachine met een krachtige inductiemotor van 4 pk. Ze is voorzien van een verstekgeleider met excentrische klemming en een gegalvaniseerde werktafel en wordt standaard geleverd met een (eveneens gegalvaniseerde) verlengtafel, handgrepen en wielen, zodat ze uitermate geschikt is voor langdurig gebruik buiten. Het hardmetalen zaagblad heeft een diameter van 315 mm en een asgat van 30 mm en kan met behulp van de handige bediening 45° gekanteld worden.
De poten van het onderstel kunnen in een handomdraai opgeplooid worden, zodat de machine makkelijk vervoerd kan worden in een personenwagen.
The adjustable roller stand supports large workpieces up to 100 kg. Chrome plated roller with ball bearings on a Heavy-Duty base. The base has four points for leveling the roller stand. It is quick and easy to change from roller to ball bed. Height adjustment from 77cm - 116cm. The roller stand can be quickly folded for storage when not in use.
Set profielmessen hoogte 40mm Nr. 0055 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Reserve trigger voor alle PIHER zuignappen die gebruik maken van een hendel. Inclusief metalen pen en plaatje.
Cette fraise à percer et affleurer peut être utiliser pour facilement percer et couper des ouvertures dans les plans de travail laminés. Le point 'V' peut facilement percer la couche supérieure des stratifiés. Le face à couper en carbide vous donne une finition parfait pour tous votre projets. La base de la fraise agit comme un guide suiveur.
Complete set in PVC box: chromed design. Comes with a handy sprocket wrench and 4 sets of chucks.
All chucks are equipped with bonding grooves on the inside and outside. Comes with an index plate and a screw feed.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Schuurband voor dubbele cilinderschuurmachine TT635 en TT660.
25 m x 100 mm (rol van 25 meter)
Verkrijgbaar in korrel 60 - 80 - 100 - 120 - 150 - 240
Portable edge bander PEB250+ mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The automatic rollers and feed with guide system ensure that the edgebanding always lands correctly on your panel. The height and thickness of the edgebanding is very easy to adjust using the millimetre control. Finally, the machine also has an adjustable glue dosage so that you always use the right quantity for your workpiece.
With the portable edge bander PEB250+, both the speed of the rollers and the temperature can be controlled. This makes the PEB250+ very suitable to work on moulded panels. The speed control allows you to always use the correct speed in function of the work. This ability offers greater working comfort on moulded panels. The table is equipped with a holder for rolls and an automatic end trimmer. In addition, this table has an edge trimmer. Using this trimmer, edge bands up to 1mm thickness are trimmed in one smooth movement. Please note: this edge trimmer only works at the top and bottom of the edge band. You still need to use a milling machine for the end milling. The edge bander can be easily removed from the table for mobile work. In that case you must use pre-cut edge bands.
Patented glue pot
The edge bander PEB250TRM, like all other Virutex models, is equipped with a patented Teflon® coated glue pot. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain. This also means that you can use other colored adhesives quickly and without any problems. No additional adjustments are required to change the glue between two projects, even if it's differently colored. The adhesive rollers have been polymerised to prevent damage to your edge bands.
Schuurdisc voor schuurmachine TT915
Diameter 150 mm
Verkrijgbaar in korrel 60 - 80 - 100 - 120 - 150 - 220
Deze schuurdisc kan gebruikt worden voor het ontbramen en schuren van staal, aluminium, non-ferrometalen, hout en kunststof.
La Timber Boy TT315 est une scie de table puissante avec un puissant moteur à induction de 2,6 ch. Elle est équipée d'un guide d'onglet à serrage excentrique et d'une table de travail galvanisée. Il est fourni en série avec une table d'extension (également galvanisée), des poignées et des roues, ce qui la rend idéale pour une utilisation extérieure prolongée. La lame en carbure de tungstène a un diamètre de 315 mm et un alésage de 30 mm et peut être inclinée de 45° à l'aide de la commande pratique.
Les pieds du châssis peuvent être repliés en un rien de temps, de sorte que la machine peut être transportée facilement dans une voiture particulière.
This abrasive planer from Virutex is easy to use and delivers fast & efficient results on large, round surfaces. The machine has excellent results on any surface coated with paint, resin, varnish or laminated panels. Easy to use on different surfaces such as wood (also against the grain) or sandwich panels. A sanding sleeve with sanding roller grain 50 is fitted as standard. Sanding rolls with other grit sizes are available on request. No additional tools are required to replace the sanding rollers.
Particularly useful for working in shipyards, where fibreglass, carbon fibre and kevlar resins are used. Also for stripping gelcoat and paint layers. Because of its round sanding surface, this machine is indispensable in the manufacture of curved wooden parts such as stairs, etc.
Supplied as standard in a handy PVC case.
Lamellen van het merk Virutex, verpakt per doos van 1000 stuks. Maak uw keuze voor nummer 0, 10 of 20.
This electric vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to Virutex's SVE600 electric vacuum system. Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The table itself must be fixed with screws in the provided holes. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, you can use multiple modules to prevent sagging. Standard delivery with one rubber seal already installed.
Capot transparant avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La taille de l'ouverture du capot anti-poussière est de 200x200mm. Avec couverture.
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
Practical and reliable support that makes it possible to install panels, doors, etc... to be held in place. For pieces with a maximum thickness between 6mm and 80mm. Thanks to its robust design, the SP270R easily supports pieces up to 80kg. The support is very easy to use. Secure your piece by placing it in the clamp and pressing it down. To unload it again, use the foot pedal.
Connector à diamètre 100mm pour connecter deux pièces de tuyaux. A utiliser en combinaison avec les systèmes d'aspiration d'Air Flux.
The Itamac Eagle series are high-quality spindle moulding machines, specifically developed for professional routing applications. Designed with both functionality and comfort in mind, this machine has every possible function for a spindle moulder in this class. Equipped with an extra-heavy chassis, a solid cast-iron protective cover with aluminium guides and fine adjustment. The powerful 230V or 400V motor delivers 3HP and ensures that this table can handle almost any routing task. The Itamac Eagle HW300E has a 30 mm shaft. With the optionally available shaft and collets, the machine can also be used for profiling with the aid of router bits. The large cast iron table guarantees the necessary stability during work. Can be used at four speeds, with centralised control panel above the machine.
Deze kofferset bevat 4 vierkantgatboren voor het boren van vierkante gaten en het trekken van rechthoekige sleuven in zacht- en hardhout.
De boren hebben een schacht met diameter 15,9 mm, een snijlengte van 70 mm en een diameter van resp. 6, 8, 10 en 12 mm.
For connecting panels of 16 or 19mm thickness using dowels (Ø8mm) or screws. Work with a high precision & high quality finish, without the need for retrofitting. This position guide is suitable for drilling holes on the end, along the side, or at any position in the centre of the panel. Maximum width of the panel to place the guide is 630mm. Standard delivery with inserts for 16 mm boards, reducer rings and drill stop.
This Multi Driller is the affordable solution for your line boring and cabinet hinges, with pneumatic operation! The machine has a powerful induction motor with a module of 5 line borings at a time with pneumatic control. This promotional package includes an adapter for line drilling and adapter for cabinet hinges.
Ideal for carpentry outside the workshop. Easy to place on any table without leaving traces. Gives more safety and precision in your work. The advanced design allows you to position the pieces in different ways, while always holding them securely. Its exceptional strength allows you to clamp metal pieces and carry out precision work. Strong, aluminium design with resin jaws to avoid damage to the workpiece.
La conception segmentée unique du tuyau lui permet de s'étendre, de se contracter et de se tordre à la forme qui convient le mieux à votre espace, puis de maintenir cette position, vous offrant des possibilités presque illimitées d'améliorer votre système de dépoussiérage. Le tuyau d'extraction a une longueur de 30 à 90 cm. La capacité de se plier, de se dilater ou de se contracter autour des obstacles pour s'adapter parfaitement dans un espace donné et conserver sa forme rend le tuyau FlexHold idéal pour les endroits exigus et les applications délicates de dépoussiérage où les tuyaux conventionnels ne fonctionnent tout simplement pas. Vous trouverez d'innombrables façons d'utiliser ce produit intelligent.
Whether you are fitting a new handle or dozens of drawer knobs, with the drilling template for cabinet hardware you no longer have to guess and work accurately and consistently every time. Thanks to the adjustable edge guide and built-in rulers (with English and metric markings), it is easy to place knobs very precisely. In addition, the cabinet hardware jig has moveable and clickable drilling guides made of hardened steel that correspond to the most common distances between the holes for cabinet knobs and handles. The guides make it easy to drill straight, precisely positioned holes. The drilling jig is suitable for just about any type of button or handle, making it particularly versatile.
Portable edge bander PEB200+ or PEB250+ pre-mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The automatic rollers and feed with guide system ensure that the edgebanding always lands correctly on your panel. The height and thickness of the edge band is very easy to adjust using the millimetre control. Finally, the machine also has an adjustable glue dosage so that you always use the right quantity for your workpiece.
Choice of table with model PEB200+ or PEB250+. Both are suitable for gluing the same types of panels with one important difference. The model PEB250+ has speed and temperature control. This makes this model more suitable for use on round or moulded panels. The table is equipped with a holder for rolls and a manual end cutter. The edge bander can be easily removed from the table for mobile work. In that case you must use pre-cut edge bands.
Patented glue pot
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain. This also means that you can use other colored adhesives quickly and without any problems. No additional adjustments are required to change the glue between two projects, even if it's differently colored. The adhesive rollers have been polymerised to prevent damage to your edge bands.
The TT255UTC offers all the possibilities of a mitre saw and, thanks to its top table with guide, it is also ideally suited for cutting boards lengthwise. Its compactness and low weight make it particularly convenient to take with you when working on the move.
The use of ball bearings on all joints ensures precise rotation of the table, head and tilting system. The compact and lightweight saw has a die-cast aluminum body, a very compact 255 mm saw blade with 48 teeth, a large, easily adjustable top table with robust guide and a clear mitre indicator. The motor has belt drive, which provides great torque, and is positioned at the rear, giving the saw a large cutting height.
The TT255UTC is further equipped with an ergonomic vertical D handle, which ensures that the up and down movement is performed from the wrist rather than the shoulder. An added benefit of this handle is that it can be used with either the left or right hand.
Set profielmessen hoogte 50mm Nr. 2062 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Un outil indispensable pour tout bricoleur. Un multi-outil avec lequel vous pouvez tout faire. Cette meuleuse d'angle (puissance 2500W) convient parfaitement aux travaux de ponçage lourds. Il est alimenté par le réseau électrique. La meuleuse d'angle peut être utilisée pour couper le métal, le bois et la pierre, mais vous pouvez également l'utiliser pour enlever la rouille et écailler le métal.
Etabli en hêtre massif avec une surface de travail de 120 mm d'épaisseur. L'établi idéal pour le professionnel ou pour votre atelier à domicile. L'établi est équipé en standard de deux étaux en fonte Bench11 avec la possibilité d'en installer un troisième (Bench 11Q). L'ensemble de l'établi est déjà huilé à la livraison. L'ensemble standard de cet établi comprend une paire de poteau cylindrique (Ø19mm) en acier plein. Hauteur de travail fixe de 900 mm. Des armoires de rangement sur mesure pour le montage dans le châssis sont disponibles séparément.
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
Set profielmessen hoogte 50mm Nr. 2054 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lame de scie à ruban d’une longueur de 4590 mm à utiliser sur la scie à ruban TT600 de Tendotools. Ce ruban de scie a 4 TPI (dents par inch) et a une largeur de 20mm. Cette lame en acier trempé "Flexback" est très adapté au sciage polyvalent. Utilisez cette lame de scie pour le bois et le plastique. Les dents de la lame de scie ont reçu un traitement thermique supplémentaire pour augmenter leur dureté. Cela permet de garder la ruban très souple et d'augmenter votre confort de coupe grâce à la dureté des dents.
Virutex brand biscuits, packaged per box of 500 pieces. Type Nr. 6
The Harvey ST1400 sliding table can be easily installed on most saw tables, milling machines, etc. to increase capacity enormously. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
Cette machine combinée compacte de la série Hobby+ est un sommet absolu dans sa catégorie de prix. La machine idéale pour tout menuisier qui travaille à la maison ou dans un petit atelier. Composé de deux machines différentes, ce Combi Workcentre vous offre trois fonctions : le sciage, le fraisage et le rabotage - dégauchissage Chaque fonction est commandée par un moteur à induction distinct de 230V. La table de sciage est équipée d'un chariot avec un guide télescopique à butée basculante, un réglage fin et un dispositif de serrage rapide. La lame de scie peut être inclinée jusqu'à 45° pour une coupe en biais. Vous pouvez également utiliser ce chariot comme chariot à tenonner pour la toupie.
Table de fraisage
La toupie (avec un arbre de Ø30mm) est réglable à trois vitesses. La vitesse la plus basse est principalement recommandée pour les travaux de fraisage lourds, tels que faire des tenons. A des vitesses plus élevées, ce type de travail peut avoir un "effet d'hélicoptère", où le cutter décolle. Les vitesses plus élevées se prêtent parfaitement au profilage. Réglez donc toujours la bonne vitesse en fonction du type de matériel et du type de travail que vous effectuez. La table de routage est équipée d'un couvercle de routeur pour que vous puissiez toujours travailler en toute sécurité.
Raboteuse-dégauchisseuse
En outre, cette machine combinée vous offre également une puissante machine à raboter et dégauchisser. La conception robuste en acier avec des surfaces de travail en fonte rend cette machine résistante à un usage quotidien intensif. Les tables de dégauchissage sont équipées d'un profil lourd en bas pour maintenir la planéité à tout moment. Les tables sont articulées indépendamment et peuvent être relevées. De cette façon, vous pouvez utiliser au maximum les capacités de la raboteuse.
Afin de pouvoir dégauchir très précisément, cette machine est équipée d'un solide guide en aluminium sur le dessus. Ce guide peut être réglé à un angle avec deux butées pour 90° et 45°. Grâce à l'arbre de rabotage lourd, équipé de trois fers de rabotage, une bonne finition est toujours garantie. Les copeaux sont évacués par une capot à charnière. Cette capot peut être raccordée à un système d'extraction des poussières grâce à la sortie Ø100mm.
Cette machine combinée peut être divisée en deux parties. Ainsi, vous pouvez utiliser séparément la table de scie + la fraiseuse et la rabot-dégau.
64 mm, 76 mm, 89 mm, 96 mm, 101 mm, 114 mm, 127 mm
Afstand gaten tot rand
25 to 127 mm
Poids
30 kg
Met kantenlijmer
PEB200+, PEB250+
Puissance
830W
Inhoud lijmbak
230cm³
Temperatuur (met PEB200+)
170°C
Werksnelheid (met PEB200+)
3.6m/min
Temperatuur (met PEB250+)
120 – 200°C
Werksnelheid (met PEB250+)
2-6m/min
Min-Max. hoogte band
10-62mm
Min-Max. dikte band
0.4-3mm
Poids
18 kg
Dimensions
620 × 490 × 420 cm
Epaisseur de coupe maximale
40 mm
Voltage
230 V
Puissance
1600 W
Coupe 0° x 0°
150 x 70 mm
Coupe 0° x 45°
100 x 70 mm
Coupe 45° x 0°
150 x 45 mm
Coupe 45° x 45°
55 x 45 mm
Diamètre lame de scie
255 mm
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,05 kg
Diamètre
20mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2
Poids
5,3 kg
Puissance
2500W
Toerental
6500 trm
Poids
184 kg
Dimensions
215 × 79 × 90 cm
Hauteur du plan de travail
900mm
Poids
0,05 kg
Diamètre
34,9mm
Longeur de coupe
25,4mm
Longueur
63,5mm
Rayon
R12,7
Queue
12mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,5 kg
Longueur
4590mm
Largeur
20mm
Largeur
0,80mm
Poids
1 kg
Type lamel
Nr. 6
Poids
30 kg
Dimensions
130 × 45 × 40 cm
Poids
250 kg
Moteur
1.5 CV, 2 PK
Voltage
230 V
Table de travail (sciage / fraisage)
940x410mm
Chariot table
400x250mm
Chariot longeur
1000mm
Hauteur de rainure
76,5mm
Trou de fraisage
140mm
Diamètre de l\' arbre
30 mm
Vitesse à vide (fraisage)
4500rpm, 6500rpm, 8500rpm
Profondeur de coupe 45°
40mm
Profondeur de coupe 90 °
60mm
Vitesse à vide (sciage)
4750rpm
Table de travail (rabotage-dégauchissage)
1085×256
Schaafbreedte
250mm
Profondeur de rabotage-dégauchissage
3mm
Table de travail (dégauchissage)
600x258mm
Profondeur de dégauchissage
2mm
Hauteur de la raboteuse
5-180mm
Vitesse d'alimentation de la raboteuse
5m/min
Vitesse à vide (arbre de rabotage)
4000rpm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy