Modèle de salle d'expo
Le broyeur à bois BrennHolz est équipé d'un puissant moteur Honda de 6,5 ch. Le broyeur est donc idéal pour les travaux grossiers. Le moteur puissant est adapté à une utilisation dans la construction, le déboisement et l'agriculture. Après ce traitement, vos déchets sont parfaitement utilisables comme engrais pour toutes sortes d'applications. Les grandes lames coupent vos déchets en petites particules, et les marteaux assurent à leur tour la transformation de ces déchets en compost. Après ce traitement, vos déchets sont parfaitement utilisables comme engrais pour toutes sortes d'applications. L'entraînement est régulé par une courroie de transmission, de sorte que les chocs soudains peuvent être parfaitement absorbés. En outre, deux feuilles interchangeables sont incluses. Toutes ces caractéristiques font de ce produit unique un concurrent redoutable pour les déchiqueteuses plus chères.
Lame de scie avec 48 dents
Lame de scie avec denture alternée (WZ) et limiteur de copeau pour la coupe vite de long et travers des bois tendres, durs et exotiques, des panneaux agglomérés et nid d'abeille, des panneaux plaqués et stratifiés sur un côté. A utiliser sur les scies à table. Lame de scie silencieuse
Bandsaw blade with length 3345mm for use on the TT400 band saw machine from Tendotools. This saw blade has 3 TPI (teeth per inch) and has a width of 20mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
Jeu de bagues de réduction pour élargir votre arbre de toupie. Grâce à ces bagues pratiques, vous pouvez utiliser des outils de fraisage de plus grand diamètre même sur votre toupie à broche de 40 mm. Cela vous permet également d'utiliser des outils de fraisage avec une broche de 50 mm sur votre toupie avec une broche de 40 mm.
Black PVC dust hood with outlet diameter 100mm to be used with the Air Flux dust extractors. The size of the dust cap mouth is 415x325mm.
SHOWROOM MODEL
De TT2010 is een veelzijdige schuurmachine met een schuurband van 2010 x 153 mm, een contourtafel voor rondschuurwerk en een afzuigmond.
This aluminum profile of 3 meters can be used as a guide on our roller beds and tables.
Two high density replacement EVA foams for the PushPRO. The rubbers are reversible, so they can be used twice.
Only to be used on a PushPRO push stick (sold separately).
Powerful belt sander for levelling and rough work. The LB31E sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. The machine is equipped with stoppers in high quality carbide (widia) to prevent wear and tear on the housing.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece.
Also available with integrated dust extractor and dust bag as model LB31EA.
Vierkante hardmetalen plaquette met radius 2" voor afruwguts 11 mm
Fraise à double rayon classique pour réaliser de belles moulures sur des armoires, des portes, des tiroirs ou d'autres meubles. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord.
Krachtige, roterende vlakschuurmachine die ontwikkelt is voor polijsten of schuurwerk met een hoogwaardige afwerking. De LR46L is goed uitgebalanceerd en levert kwalitatief hoogwaardig werk af, zonder dat u achteraf nog hoeft bij te werken. De standaard gemonteerde PUR-bodemplaat is nagenoeg onbreekbaar en staat toe om elk standaard schuurpapier te plaatsen. Optioneel is een bodemplaat met klittenband / velcro verkrijgbaar. Met dank aan het ergonomische ontwerp met handgreep vooraan en geïntegreerde antislipoppervlakken is deze machine erg comfortabel om mee te werken. En dat zowel voor rechts- als linkshandigen.
Tenslotte is deze vlakschuurmachine voorzien van een nieuw en uniek stofbeschermingssysteem. Dit om te voorkomen dat stof de kwetsbare delen beschadigt. Standaard is de LR46L voorzien van een geïntegreerde stofafzuiging en stofzak. Met dank aan deze verbeterde bescherming tegen stof en stofophoping gaan zowel uw machine als uw schuurpapier langer mee dan een klassieke vlakschuurder.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
SHOWROOM MODEL, including remote control!
This dust extractor is equipped with a 2HP induction engine capable of delivering a steady airflow of 2270m³/h. Thanks to the cyclone collector unit, the wood particles and dust (99.9%) are separated from the air flow before they enter the filter cartridge. As the wood particles do not pass through the fan unit, optimum airflow and dust collection are constantly guaranteed. The dust (99.9%) is collected in a metal waste bin with a viewing window. This drum was fitted with a one-hand clamp and separate wheels for quick and easy emptying. The remaining dust passes through a Canister filter cartridge with automatic filter cleaning. Thanks to this cartridge, the dust is filtered between 0.2µm and 2µm towards a PVC residual bag.
La table à vide SFV50 est adaptée pour une fixation solide et rapide du panneau. Grâce aux ventouses, ce support est idéal pour tous les matériaux lisses et non poreux. Deux serres-joints sont inclus en standard pour fixer le support. La table est un moyen efficace et convivial de tenir le panneau et de travailler confortablement sur les bords. Pour les pièces de grande taille, il est recommandé d'utiliser plusieurs supports. Le support peut être placé à la fois horizontalement et verticalement. Egalement disponible avec une simple ventouse comme SFV150.
The BOW Portable Saw Featherboard features an innovative use of high-density EVA Foam/foam combs and clamping system that increases input control, dramatically improves recoil and better protects your wood from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. The springs are also unbreakable and, unlike plastic springs, they can be replaced if damaged.
Mounting material included.
Cette machine combinée compacte de la série Hobby+ est un sommet absolu dans sa catégorie de prix. La machine idéale pour tout menuisier qui travaille à la maison ou dans un petit atelier. Composé de deux machines différentes, ce Combi Workcentre vous offre trois fonctions : le sciage, le fraisage et le rabotage - dégauchissage Chaque fonction est commandée par un moteur à induction distinct de 230V. Cette machine combinée peut également être divisée en deux parties. Ainsi, vous pouvez utiliser séparément la table de scie + la fraiseuse et la rabot-dégau.
Dans ce pack promo, la machine est livrée avec l'extraction, le tuyau d'extraction transparent et les bandes de serrage, ainsi qu'une caisse complète de matériaux de fraisage !
Le kit de roues WK600 est disponible en option. Attention! Le kit de roues ne peut être utilisé qu'avec les extensions.
Table de sciage mobile, robuste et entièrement en acier, pour un sciage rapide, facile et sûr du bois de chauffage. Cette table de sciage est entièrement conforme aux normes de sécurité du CEN pour ce type de machines. Equipé d'un couvercle pour que vous ne puissiez pas vous approcher de la lame de scie pendant le travail. Comprend une protection contre la tension nulle sur l'interrupteur pour une meilleure sécurité en cas de perte de tension. Depuis des années, Brennholz est synonyme de fiabilité et de sécurité. Au sommet, la machine est équipée d'une griffe à grosses dents pour retenir le bois. Cette griffe a une double fonction de sécurité. D'une part, la griffe retient le bois et d'autre part, elle bloque la table de coupe lorsque la griffe n'est pas abaissée.
Entièrement assemblé à la livraison et prêt à l'emploi.
Raccord à diamètre 100-50mm à utiliser avec les systèmes d'aspiration Air Flux.
Tuyau anti-statique longueur 15 mètre diamètre 100 mm A utiliser en combinaison avec les extracteurs de poussière Air Flux.
An indispensable tool for every handyman. A multi-tool that you can do everything with. This angle grinder (power 2500W) is extremely suitable for heavy grinding work. It is powered by mains electricity. The angle grinder can be used for cutting metal, wood and stone, and you can also use it for grinding off rust and deburring metal.
DEMO MODEL
Powerful belt sander for levelling and rough work. The LB31EA sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. Equipped with an integrated dust extractor and dust bag to allow the user to work comfortably and cleanly.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece.
Also available with connection for dust extraction as model LB31E.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
The Harvey ST1400 sliding table can be easily installed on most saw tables, milling machines, etc. to increase capacity enormously. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
Beweegbare bek met anti-slip rem voor op de PIHER Mod. MM lijmtangen.
Voorzien van trapezium schroefdraad.
Showroommodel
De TT975 Pro2 houtdraaibank is een toestel voor professionele toepassingen. De machine biedt u een brede waaier aan mogelijkheden en heeft een groot bereik van elektronisch regelbare snelheden.
Deze compacte combinatiemachine uit de Hobby+ Series is een absolute topper binnen zijn prijsklasse. De ideale machine voor elke houtbewerker die thuis, of in een kleine werkplaats aan de slag gaat. Opgebouwd uit twee verschillende machines biedt deze Combi Workcentre u drie functies: verzagen, frezen en vlak- en vandikte. Elke functie wordt aangedreven met behulp van een aparte 230V inductiemotor. Deze combinatiemachine is gelijk aan de Combi Workcentre TT250 met een belangrijk verschil. De zaagtafel is voorzien van een prismatisch slidingsysteem. Dankzij dit slidingsysteem wordt het eenvoudiger om plaatmateriaal tot 1300mm te verzagen. Daarnaast beschikt de zaagtafel ook over een groter zaagblad (255mm) en een krachtiger motor (3PK).
Wielkit TT99 optioneel verkrijgbaar.
This wheelbase from Belmash is compatible with the Universal 2000, SDM2500, SDMR2500 and SDR2200 machines. Place your Belmash machine at an ideal height and make it mobile.
Extensions for the wheel kit WK600. Use the two bars (length: 915mm) to replace the original ones from your wheel kit. Transport larger machines without loss of carrying capacity.
Set profielmessen hoogte 40mm Nr. 0003 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Insulating silicone seal for windows & doors in brown colour. Excellent resistance at temperatures between -60 and 200°C. With this seal you will enjoy both good temperature and sound insulation. Essential for new constructions and easy to mill into existing constructions. Use the Virutex slotting machine RA17VG with the two-sided straight bit.
Available in diameter 6mm or 8mm.
Saw blade with 20 teeth
Construction saw blade with 'flat angle' teeth and a wide back for improved support of the tooth. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for use on pallet wood or wood with remnants of nails,... Thanks to the wide back, the teeth are less likely to be damaged if you hit nails or other debris in the wood during sawing. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
Biscuits per box of 1000 pieces. Made from high-quality European woods. Thanks to its structure extra absorbent.
Porte outil à moulurer avec des plaquettes réversibles et araseurs en carbure de haute qualité (HW). Les plaquettes sont alternativement à un angle différent pour un meilleur résultat de coupe. Grâce aux araseurs en haut et en bas, votre travail de fraisage est toujours propre. Parfait pour fraiser des rabais. Grâce aux lames en carbure de tungstène, cette fraise à rainurer coupe sans effort les planches massives, les bois durs et tendres, le MDF ou les planches laminées.
Disponible avec un alésage de 30 mm ou 50 mm.
Lightweight and powerful rotary orbital sander for high-quality sanding and polishing. This machine combines a double movement, the sanding pad moves both orbital and rotary orbital. Thanks to the double movement during sanding, you always get a smooth surface without scratching your workpiece. Available with different orbit diameters of 4mm (for fine sanding) or 7mm (for medium to fine sanding).
Equipped with an integrated dust extractor and dust bag. With electronic speed control and brake system for the sanding pad. Standard delivered with a sanding pad with velcro.
Set profielmessen hoogte 40mm Nr. 0054 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Een siliconen voeg maken met een perfecte afwerking is niet altijd even gemakkelijk. Denk maar aan: achter of langs een kookvuur, kraan, zijkant van een raam … Maar daar onderscheidt Silicone Master® zich van andere producten. Vele professionele gebruikers merken dat het nastrijken van de siliconen dichting met Silicone Master® zorgt voor een egaler en 100% perfect eindresultaat.
9 verschillende afwerkingsprofielen. Geleverd met handige opbergbox.
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
The thicknessing unit is an indispensable tool for planing on the Belmash SDM2500 and makes it possible to obtain a workpiece of excellent quality. It has its own cutterblock that is driven via the motor of the SDM2500. With this unit you can plan thickness on the SDM2500 of 5-103mm and a planing width of 250mm.
Tuyau anti-statique longueur 6 mètre diamètre 100 mm. A utiliser en combinaison avec les extracteurs de poussière Air Flux.
Last pieces!
The Job-Saw TT255 is a powerful and compact machine for all carpentry work in the workshop or on the job site. The telescopic extension table goes up to a length of 1030 mm. Equipped with built-in hoover with a large collection bag. Cutting height of 82 mm at 90° and easily tiltable to 45°. Easy to move and with telescopic handle. Width guide with eccentric clamping.
DEMO MODEL
Plaqueuse de chants manuelle pour la fixation de chants préencollés en PVC, mélamine ou placage sur des panneaux. La conception spéciale avec des pinces réglables sur les deux côtés du panneau assure une grande précision et une grande stabilité. La machine permet un collage en surface ou un surdimensionnement des deux côtés. Temps de préparation : moins d'une minute. Cette plaqueuse de chants manuelle peut être utilisée sur des pièces plates, concaves ou convexes. Grâce à un système de coupe pratique, il est facile de scier les extrémités. L'épaisseur et la largeur maximales des chants sont de 1x50 mm.
Jeu complet en coffret en bois, finition anticorrosion (gold-bicromat) avec clé à couronne dentée pratique et 3 jeux de mors et 1 mandrin.
DEMO MODEL, ONE PIECE ONLYMODEL WITH PEB250
Portable edge bander PEB200+ or PEB250+ pre-mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edgebanding with thicknesses between 0.4-3mm and 10-62mm height. Choice of table with model PEB200+ or PEB250+. Both are suitable for gluing the same types of panels with one important difference. The model PEB250+ has speed and temperature control. The table is equipped with a holder for rolls and a manual end cutter.
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain.
Connector diameter 100mm to connect multiple pieces of Air Flux accessories. To be used with the Air Flux dust extractors.
Separate large wood chips from your system before they reach your dust collector. A pair of plastic elbow and coupling components serve as input and output points when you install them at either end of a barrel, bin, or other receptacle you plan to use to capture large wood chips. This system prevents wear and tear on your dust collector and you don't have to empty it as often. The two coupling components fit a standard 100mm hose.
This set comes with a template to make the correct holes in your container for mounting the two connection points.
Need inspiration? View the construction plan at downloads and easily create your own collection container.
Thanks to these router bits you can cut a half-round groove on every kind of wood. Easily make decorative grooves to break up large vertical surfaces or to decorate furniture. Finally, the grooves also provide a better grip. For example for handles or drawers. Pass multiple times when removing large quantities of material.
Promopakket voor de zaagtafel BELMASH CBS 2400
Zaaghoogte 0-103mm, 45°-70 MM zaaghoogte met mogelijkheid om te werken met groefvrezen.
Sanding belt for sander TT2500LBS - 7100 x 150 mm
Content
Le broyeur à bois BrennHolz est équipé d'un puissant moteur Honda de 6,5 ch. Le broyeur est donc idéal pour les travaux grossiers. Le moteur puissant est adapté à une utilisation dans la construction, le déboisement et l'agriculture. Après ce traitement, vos déchets sont parfaitement utilisables comme engrais pour toutes sortes d'applications. Les grandes lames coupent vos déchets en petites particules, et les marteaux assurent à leur tour la transformation de ces déchets en compost. Après ce traitement, vos déchets sont parfaitement utilisables comme engrais pour toutes sortes d'applications. L'entraînement est régulé par une courroie de transmission, de sorte que les chocs soudains peuvent être parfaitement absorbés. En outre, deux feuilles interchangeables sont incluses. Toutes ces caractéristiques font de ce produit unique un concurrent redoutable pour les déchiqueteuses plus chères.
Lame de scie avec 48 dents
Lame de scie avec denture alternée (WZ) et limiteur de copeau pour la coupe vite de long et travers des bois tendres, durs et exotiques, des panneaux agglomérés et nid d'abeille, des panneaux plaqués et stratifiés sur un côté. A utiliser sur les scies à table. Lames de scie silencieuses avec design anti-kickback.
Bandsaw blade with length 3345mm for use on the TT400 band saw machine from Tendotools. This saw blade has 3 TPI (teeth per inch) and has a width of 20mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
Jeu de bagues de réduction pour élargir votre arbre de toupie. Grâce à ces bagues pratiques, vous pouvez utiliser des outils de fraisage de plus grand diamètre même sur votre toupie à broche de 40 mm. Cela vous permet également d'utiliser des outils de fraisage avec une broche de 50 mm sur votre toupie avec une broche de 40 mm.
Black PVC dust hood with outlet diameter 100mm to be used with the Air Flux dust extractors. The size of the dust cap mouth is 415x325mm.
De TT2010 is een compacte, veelzijdige schuurmachine. Ze bevat een schuurband van 2010 x 153 mm, heeft een contourtafel voor rondschuurwerk en is voorzien van een afzuigmond. De band kan zowel verticaal als horizontaal geplaatst worden. De aluminium werktafels kunnen allebei onder een hoek tot 45° gekanteld worden. Door haar onklopbare prijs-kwaliteitverhouding is dit het ideale model voor vakmensen. De grafietcoating op de schuurtafel zorgt voor een beter glijvermogen van de schuurband.
Ze is standaard uitgerust met een scherm voor horizontaal schuren, een verstekaanslag en een quick-releasesysteem dat u in staat stelt om snel de schuurband te wisselen. Standaard wordt ook een onderstel meegeleverd.
De schuurband is verkrijgbaar in korrel 60, 80, 100 en 150.
This aluminum profile of 3 meters can be used as a guide on our roller beds and tables.
It features 2 flip stops and comes with mounting brackets for assembly on the roller bed or table.
Two high density replacement EVA foams for the PushPRO. The rubbers are reversible, so they can be used twice.
Only to be used on a PushPRO push stick (sold separately).
Powerful belt sander for levelling and rough work. The LB31E sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. The machine is equipped with stoppers in high quality carbide (widia) to prevent wear and tear on the housing. Equipped with a connection for dust extraction to allow the user to work comfortably and cleanly. Several sanding belts with different grit sizes are optionally available.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece.
Also available with integrated dust extractor and dust bag as model LB31EA.
Vierkante hardmetalen plaquette met radius 2" voor afruwguts 11 mm
Fraise à double rayon classique pour réaliser de belles moulures sur des armoires, des portes, des tiroirs ou d'autres meubles. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord.
Krachtige, roterende vlakschuurmachine die ontwikkelt is voor polijsten of schuurwerk met een hoogwaardige afwerking. De LR46L is goed uitgebalanceerd en levert kwalitatief hoogwaardig werk af, zonder dat u achteraf nog hoeft bij te werken. De standaard gemonteerde PUR-bodemplaat is nagenoeg onbreekbaar en staat toe om elk standaard schuurpapier te plaatsen. Optioneel is een bodemplaat met klittenband / velcro verkrijgbaar. Met dank aan het ergonomische ontwerp met handgreep vooraan en geïntegreerde antislipoppervlakken is deze machine erg comfortabel om mee te werken. En dat zowel voor rechts- als linkshandigen.
Tenslotte is deze vlakschuurmachine voorzien van een nieuw en uniek stofbeschermingssysteem. Dit om te voorkomen dat stof de kwetsbare delen beschadigt. Standaard is de LR46L voorzien van een geïntegreerde stofafzuiging en stofzak. Met dank aan deze verbeterde bescherming tegen stof en stofophoping gaan zowel uw machine als uw schuurpapier langer mee dan een klassieke vlakschuurder.
Ook verkrijgbaar met een elektronische snelheidsregeling als model LRE46L.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
De Air Flux® cyclones distinguish themselves from other classic cyclone dust extractors due to their unique negative pressure system. The waste bags do not need to be suspended in a basket because they are kept in place thanks to the airflow. It is also possible to control the Air Flux Cyclone dust extractors remotely wtih help from a PCB module (sold seperately). The Air Flux cyclone Dust Extractors can also be ordered in a mobile version, thanks to the sturdy wheeled base they can be easily moved throughout your entire workshop. The silent induction engine makes sure not only your lungs are better protected but your ears as well.
This dust extractor is equipped with a 2HP induction engine capable of delivering a steady airflow of 2270m³/h. Thanks to the cyclone collector unit, the wood particles and dust (99.9%) are separated from the air flow before they enter the filter cartridge. As the wood particles do not pass through the fan unit, optimum airflow and dust collection are constantly guaranteed. The dust (99.9%) is collected in a metal waste bin with a viewing window. This drum was fitted with a one-hand clamp and separate wheels for quick and easy emptying. The remaining dust passes through a Canister filter cartridge with automatic filter cleaning. Thanks to this cartridge, the dust is filtered between 0.2µm and 2µm towards a PVC residual bag.
La table à vide SFV50 est adaptée pour une fixation solide et rapide du panneau. Grâce aux ventouses, ce support est idéal pour tous les matériaux lisses et non poreux. Deux serres-joints sont inclus en standard pour fixer le support. La table est un moyen efficace et convivial de tenir le panneau et de travailler confortablement sur les bords. Pour les pièces de grande taille, il est recommandé d'utiliser plusieurs supports. Le support peut être placé à la fois horizontalement et verticalement. Egalement disponible avec une simple ventouse comme SFV150.
The BOW Portable Saw Featherboard features an innovative use of high-density EVA Foam/foam combs and clamping system that increases input control, dramatically improves recoil and better protects your wood from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. The springs are also unbreakable and, unlike plastic springs, they can be replaced if damaged.
Mounting material included.
Cette machine combinée compacte de la série Hobby+ est un sommet absolu dans sa catégorie de prix. La machine idéale pour tout menuisier qui travaille à la maison ou dans un petit atelier. Composé de deux machines différentes, ce Combi Workcentre vous offre trois fonctions : le sciage, le fraisage et le rabotage - dégauchissage Chaque fonction est commandée par un moteur à induction distinct de 230V. La table de sciage est équipée d'un chariot avec un guide télescopique à butée basculante, un réglage fin et un dispositif de serrage rapide. La lame de scie peut être inclinée jusqu'à 45° pour une coupe en biais. Vous pouvez également utiliser ce chariot comme chariot à tenonner pour la toupie.
Table de fraisage
La toupie (avec un arbre de Ø30mm) est réglable à trois vitesses. La vitesse la plus basse est principalement recommandée pour les travaux de fraisage lourds, tels que faire des tenons. A des vitesses plus élevées, ce type de travail peut avoir un "effet d'hélicoptère", où le cutter décolle. Les vitesses plus élevées se prêtent parfaitement au profilage. Réglez donc toujours la bonne vitesse en fonction du type de matériel et du type de travail que vous effectuez. La table de routage est équipée d'un couvercle de routeur pour que vous puissiez toujours travailler en toute sécurité.
Raboteuse-dégauchisseuse
En outre, cette machine combinée vous offre également une puissante machine à raboter et dégauchisser. La conception robuste en acier avec des surfaces de travail en fonte rend cette machine résistante à un usage quotidien intensif. Les tables de dégauchissage sont équipées d'un profil lourd en bas pour maintenir la planéité à tout moment. Les tables sont articulées indépendamment et peuvent être relevées. De cette façon, vous pouvez utiliser au maximum les capacités de la raboteuse.
Afin de pouvoir dégauchir très précisément, cette machine est équipée d'un solide guide en aluminium sur le dessus. Ce guide peut être réglé à un angle avec deux butées pour 90° et 45°. Grâce à l'arbre de rabotage lourd, équipé de trois fers de rabotage, une bonne finition est toujours garantie. Les copeaux sont évacués par une capot à charnière. Cette capot peut être raccordée à un système d'extraction des poussières grâce à la sortie Ø100mm.
Cette machine combinée peut être divisée en deux parties. Ainsi, vous pouvez utiliser séparément la table de scie + la fraiseuse et la rabot-dégau.
Table de sciage mobile, robuste et entièrement en acier, pour un sciage rapide, facile et sûr du bois de chauffage. Cette table de sciage est entièrement conforme aux normes de sécurité du CEN pour ce type de machines. Equipé d'un couvercle pour que vous ne puissiez pas vous approcher de la lame de scie pendant le travail. Comprend une protection contre la tension nulle sur l'interrupteur pour une meilleure sécurité en cas de perte de tension. Depuis des années, Brennholz est synonyme de fiabilité et de sécurité. Découvrez tous les avantages de la solide qualité autrichienne grâce à cette scie à bois de chauffage. Cette machine à scier est équipée d'une lame de scie en chrome allemand de diamètre Ø650mm. Le moteur à induction à entraînement direct fournit 3,5 CV.
Au sommet, la machine est équipée d'une griffe à grosses dents pour retenir le bois. Cette griffe a une double fonction de sécurité. D'une part, la griffe retient le bois et d'autre part, elle bloque la table de coupe lorsque la griffe n'est pas abaissée. Grâce à toutes ces caractéristiques, cette table est très adaptée à la coupe de branches ou de troncs d'arbres d'une épaisseur comprise entre 80 mm et 205 mm. La lame de scie est facile à utiliser et coupe rapidement le bois. Cela vous permet de couper de grandes quantités de bois en une seule fois, sans problème et de manière ergonomique. Il est équipé d'une base solide à deux roues et d'une poignée robuste permettant de déplacer facilement la machine. Facile à déplacer, tant à l'intérieur qu'à l'extérieur sur des surfaces inégales. Entièrement assemblé à la livraison et prêt à l'emploi. Utilisez au moins câble d'alimentation de 2,5 m² pour éviter d'endommager le moteur.
Raccord à diamètre 100-50mm à utiliser avec les systèmes d'aspiration Air Flux.
Tuyau anti-statique longueur 15 mètre diamètre 100 mm A utiliser en combinaison avec les extracteurs de poussière Air Flux.
An indispensable tool for every handyman. A multi-tool that you can do everything with. This angle grinder (power 2500W) is extremely suitable for heavy grinding work. It is powered by mains electricity. The angle grinder can be used for cutting metal, wood and stone, and you can also use it for grinding off rust and deburring metal.
Powerful belt sander for levelling and rough work. The LB31EA sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. The machine is equipped with stoppers in high quality carbide (widia) to prevent wear and tear on the housing. Equipped with an integrated dust extractor and dust bag to allow the user to work comfortably and cleanly. Several sanding belts with different grit sizes are optionally available.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece.
Also available with connection for dust extraction as model LB31E.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
The Harvey ST1400 sliding table can be easily installed on most saw tables, milling machines, etc. to increase capacity enormously. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
Beweegbare bek met anti-slip rem voor op de PIHER Mod. MM lijmtangen.
Voorzien van trapezium schroefdraad.
De TT975 Pro2 houtdraaibank is een toestel van onze Comfort Line voor professionele toepassingen. De machine heeft een sterk stalen voetstuk met ingebouwde motoraandrijving en opbergvak voor optimale stabiliteit. Ze biedt u een brede waaier aan mogelijkheden, waaronder achteruit draaien en schuren. Met haar puntafstand van 975 mm kan ze ook grote stukken draaien. Ze heeft 5 riemposities.
De TT975 Pro2 heeft een groot bereik van elektronisch regelbare snelheden. Het vibratie-absorberende bed, de kop, de staartsteun, de beitelsteun en de beitelsteunarm in gietijzer zijn van hoge kwaliteit.
De 4 grote (62 mm), met rubber overtrokken kogellagers hebben een levenslange garantie. De staartsteun met excentrische klemming en de beitelsteunarm sluiten aanspanners uit. De holle assen van de hoofdsteun en staartsteun zorgen voor diepe gatboringen. De krachtige luchtgekoelde motor is volledig ingesloten. Het bedieningspaneel kan verplaatst worden.
Deze compacte combinatiemachine uit de Comfort Line Series scoort uitstekend op het vlak van comfort, gebruiksvriendelijkheid, kwaliteit én prijs. De ideale machine voor elke houtbewerker die thuis, of in een kleine werkplaats aan de slag gaat. Opgebouwd uit twee verschillende machines biedt deze combinatiemachine u drie functies: verzagen, frezen en vlak- en vandikte. Elke functie wordt aangedreven met behulp van een aparte 230V inductiemotor. De zaagtafel is voorzien van een prismatisch slidingsysteem. Dankzij dit slidingsysteem wordt het eenvoudiger om plaatmateriaal tot 1300mm te verzagen. Daarbovenop heeft deze zaagtafel een zaagblad van 255mm. Het zaagblad is kantelbaar tot 45° om te verzagen onder hoek. Het slidingsysteem kan u ook gebruiken als pennenwagen voor de freestafel. Verkrijgbaar op 230V of 3x400V.
Freestafel
De freesmachine (met as Ø30mm) is instelbaar op vier snelheden. Dankzij de laagste snelheid van 1800rpm is het mogelijk om met deze freesmachine ook te schuren. De snelheid van 3000rpm is dan weer voornamelijk aangewezen voor zwaar freeswerk, zoals bijvoorbeeld pennen slaan. Bij hogere snelheden kan dit type werk een 'helikoptereffect' hebben, waarbij de frees opstijgt. De hogere snelheden tenslotte, lenen zich uitstekend voor profileren. Stel dus steeds de juiste snelheid in afhankelijk van het type materiaal en het type werk dat u uitvoert. De freestafel beschikt over een freeskap zodat u altijd veilig kan werken.
Vlak- en vandiktebank
Daarnaast biedt deze combinatiemachine u ook een krachtige, vlak- en vandiktebank. Dankzij het stevige, stalen design met gietijzeren werkbladen is deze machine bestand tegen zwaar dagelijks gebruik. De werktafels zijn onderaan voorzien van een zwaar profiel om de vlakheid te allen tijde te behouden. De tafels scharnieren onafhankelijk van elkaar en kunnen omhoog geplaatst worden. Op deze manier kan u maximaal gebruik maken van de capaciteiten van de vandiktebank. De maximale schaafbreedte bedraagt 265mm.
Om erg precies te kunnen schaven is deze machine bovenaan voorzien van een stevige, aluminium geleider. Deze geleider kan ingesteld worden onder hoek met twee stops voor 90° en 45°. Met behulp van de zware schaafas, voorzien van drie schaafbeitels, is een goede afwerking steeds gegarandeerd. Het afvoeren van de spaanders gebeurt via een scharnierende kap. Deze kap kan aangesloten worden op een stofafzuiging met behulp van de uitlaat met Ø100mm.
Deze combinatiemachine kan opgedeeld worden in twee delen. Op deze manier kan u apart gebruiken van de zaagtafel + freesmachine en van de vlak- en vandiktebank.
This wheelbase from Belmash is compatible with the Universal 2000, SDM2500, SDMR2500 and SDR2200 machines. Place your Belmash machine at an ideal height and make it mobile.
Extensions for the wheel kit WK600. Use the two bars (length: 915mm) to replace the original ones from your wheel kit. Transport larger machines without loss of carrying capacity.
Set profielmessen hoogte 40mm Nr. 0003 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Insulating silicone seal for windows & doors in brown colour. Excellent resistance at temperatures between -60 and 200°C. With this seal you will enjoy both good temperature and sound insulation. Essential for new constructions and easy to mill into existing constructions. Use the Virutex slotting machine RA17VG with the two-sided straight bit.
Available in diameter 6mm or 8mm.
Saw blade with 20 teeth
Construction saw blade with 'flat angle' teeth and a wide back for improved support of the tooth. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for use on pallet wood or wood with remnants of nails,... Thanks to the wide back, the teeth are less likely to be damaged if you hit nails or other debris in the wood during sawing. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
Biscuits per box of 1000 pieces. Made from high-quality European woods. Thanks to its structure extra absorbent.
Porte outil à moulurer avec des plaquettes réversibles et araseurs en carbure de haute qualité (HW). Les plaquettes sont alternativement à un angle différent pour un meilleur résultat de coupe. Grâce aux araseurs en haut et en bas, votre travail de fraisage est toujours propre. Parfait pour fraiser des rabais. Grâce aux lames en carbure de tungstène, cette fraise à rainurer coupe sans effort les planches massives, les bois durs et tendres, le MDF ou les planches laminées.
Disponible avec un alésage de 30 mm ou 50 mm.
Lightweight and powerful rotary orbital sander for high-quality sanding and polishing. This machine combines a double movement, the sanding pad moves both orbital and rotary orbital. Thanks to the double movement during sanding, you always get a smooth surface without scratching your workpiece. The ergonomic design ensures a perfect grip and comfortable working. All the controls are easily accessible while working. The anti-vibration counterweights inside provide higher comfort than similar sanders.
Available with two different orbit diameters. Model RTE146L has a orbit diameter of 4mm for extra fine sanding. In addition, thanks to a orbit diameter of 7mm, the RTE46L model is suitable for medium to fine sanding. Equipped with an integrated dust extractor and dust bag. With electronic speed control and brake system for the sanding pad. Standard delivered with a sanding pad with velcro.
Finally, this orbital sander is equipped with a new and unique dust protection system. This is to prevent dust from damaging the vulnerable parts. As standard, this sander is fitted with an integrated dust extractor and dust bag. Thanks to this improved protection against dust and dust accumulation, both your machine and your sanding paper will last longer than a classic sander.
Set profielmessen hoogte 40mm Nr. 0054 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Een siliconen voeg maken met een perfecte afwerking is niet altijd even gemakkelijk. Denk maar aan: achter of langs een kookvuur, kraan, zijkant van een raam … Maar daar onderscheidt Silicone Master® zich van andere producten. Vele professionele gebruikers merken dat het nastrijken van de siliconen dichting met Silicone Master® zorgt voor een egaler en 100% perfect eindresultaat. Maar zelfs gebruikers die nog nooit met siliconen hebben gewerkt kunnen nu, dankzij Silicone Master®, een perfecte afwerking bekomen. Door zijn 9 verschillende profielen kan je de afwerking naar wens kiezen terwijl de ergonomische handgreep ervoor zorgt dat je zelfs op moeilijk bereikbare plaatsen moeiteloos een perfecte siliconen dichting kan aanbrengen. Na onderzoek in eigen laboratoria heeft Silicone Master® de juiste formule gevonden voor het vervaardigen van de Ultra TPV profielen. Deze juiste hardheid en elasticiteit zorgt ervoor dat je steeds exact hetzelfde afwerkingsprofiel krijgt, zelfs wanneer er minder of meer druk wordt uitgeoefend op de ergonomische handgreep en zelfs wanneer je in het midden van het werk stopt en nadien weer inpikt.
Silicone Master® wordt standaard geleverd met een handig opbergdoosje voor de 9 verschillende profielen.
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
The thicknessing unit is an indispensable tool for thickness planing on the Belmash SDM2500 and makes it possible to obtain a workpiece of excellent quality. It has its own cutterblock that is driven via the motor of the SDM2500. With this unit you can plan thickness on the SDM2500 of 5-103mm and a planing width of 250mm.
Tuyau anti-statique longueur 6 mètre diamètre 100 mm. A utiliser en combinaison avec les extracteurs de poussière Air Flux.
The Job-Saw TT255 is a powerful and compact machine for all carpentry work in the workshop or on the job site. The telescopic extension table goes up to a length of 1030 mm. Equipped with built-in extractor with a large collection bag. Cutting height of 82 mm at 90° and easily tiltable to 45°. Easy to move and with telescopic handle. Width guide with eccentric clamping.
Plaqueuse de chants manuelle pour la fixation de chants préencollés en PVC, mélamine ou placage sur des panneaux. La conception spéciale avec des pinces réglables sur les deux côtés du panneau assure une grande précision et une grande stabilité. La machine permet un collage en surface ou un surdimensionnement des deux côtés. Temps de préparation : moins d'une minute. Cette plaqueuse de chants manuelle peut être utilisée sur des pièces plates, concaves ou convexes. Grâce à un système de coupe pratique, il est facile de scier les extrémités. L'épaisseur et la largeur maximales des chants sont de 1x50 mm.
Jeu complet en coffret en bois, finition anticorrosion (gold-bicromat). Livré avec une clé à couronne dentée pratique et 4 jeux de mors.
Tous les mors sont pourvus de rainures d'adhérence à l'intérieur et à l'extérieur Pourvu d'un mors plateau, un entraîneur à serrage rapide et un entrâineur de vis.
Portable edge bander PEB200+ or PEB250+ pre-mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The automatic rollers and feed with guide system ensure that the edgebanding always lands correctly on your panel. The height and thickness of the edge band is very easy to adjust using the millimetre control. Finally, the machine also has an adjustable glue dosage so that you always use the right quantity for your workpiece.
Choice of table with model PEB200+ or PEB250+. Both are suitable for gluing the same types of panels with one important difference. The model PEB250+ has speed and temperature control. This makes this model more suitable for use on round or moulded panels. The table is equipped with a holder for rolls and a manual end cutter. The edge bander can be easily removed from the table for mobile work. In that case you must use pre-cut edge bands.
Patented glue pot
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain. This also means that you can use other colored adhesives quickly and without any problems. No additional adjustments are required to change the glue between two projects, even if it's differently colored. The adhesive rollers have been polymerised to prevent damage to your edge bands.
Connector diameter 100mm to connect multiple pieces of Air Flux accessories. To be used with the Air Flux dust extractors.
Separate large wood chips from your system before they reach your dust collector. A pair of plastic elbow and coupling components serve as input and output points when you install them at either end of a barrel, bin, or other receptacle you plan to use to capture large wood chips. This system prevents wear and tear on your dust collector and you don't have to empty it as often. The two coupling components fit a standard 100mm hose.
This set comes with a template to make the correct holes in your container for mounting the two connection points.
Need inspiration? View the construction plan at downloads and easily create your own collection container.
Thanks to these router bits you can cut a half-round groove on every kind of wood. Easily make decorative grooves to break up large vertical surfaces or to decorate furniture. Finally, the grooves also provide a better grip. For example for handles or drawers. Pass multiple times when removing large quantities of material.
Promotiepakket voor de zaagtafel BELMASH CBS2400, samengesteld uit: Sponningfrees 10mm, Air Flux AF 1100/45, 2 Meter clearview 100mm, Klembanden 2x, Multi adaptor 3DU1004.
Sanding belt for sander TT2500LBS
7100 x 150 mm
Available in grit 60 - 80 - 100 - 120
Weight
86 kg
1 kg
0,5 kg
0,5 kg
1 kg
86 kg
15 kg
0,2 kg
6,5 kg
ND
0,05 kg
3 kg
0,05 kg
150 kg
2 kg
0,3 kg
250 kg
140 kg
ND
1 kg
5,3 kg
6,5 kg
0,05 kg
30 kg
1 kg
0,30 kg
330 kg
250 kg
7 kg
5 kg
0,05 kg
2 kg
1 kg
2 kg
1 kg
2,6 kg
0,05 kg
0,2 kg
0,05 kg
16,5 kg
1 kg
36 kg
2,7 kg
ND
30 kg
0,05 kg
1 kg
0,05 kg
85 kg
0,05 kg
Dimensions
ND
ND
ND
ND
41,5 × 32,5 cm
1150 × 600 × 1100 cm
ND
ND
ND
ND
ND
ND
ND
130 × 80,5 × 190 cm
ND
ND
ND
ND
ND
1500 cm
ND
ND
ND
130 × 45 × 40 cm
ND
ND
1520 × 570 × 555 cm
ND
ND
ND
0,4 cm
ND
ND
ND
ND
ND
0,4 cm
ND
ND
ND
600 cm
ND
ND
ND
ND
ND
ND
ND
ND
ND
Additional information
Poids
86 kg
Entraînement
pétrole – moteur Honda
Puissance
6.5 PK
nombre de couteaux
10
entrée maximale
6 cm
Poids
1 kg
Diamètre lame de scie
600mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
4,2mm
Epaisseur lame de scie
3,0mm
nombre de dents
48
Orifices de traction
PH01
Poids
0,5 kg
Longueur
3345mm
Largeur
20mm
Dikte
0,80mm
Poids
0,5 kg
Diamètre
50mm
Diamètre de l\' arbre
40mm
Poids
1 kg
Dimensions
41,5 × 32,5 cm
Diamètre
100mm
Poids
86 kg
Dimensions
1150 × 600 × 1100 cm
Inclinaison
45°
Grain
K60, K80, K100, 150
Table de travail
514 x 221 mm, 790 x 221 mm
Bande à poncer
2010 x 152 mm
Moteur
2 PK
Voltage
230 V
Poids
15 kg
Longueur
3000 mm
Poids
0,2 kg
Poids
6,5 kg
Puissance
1200W
Afmetingen schuurband
690x100mm
Schuuroppervlakte
175x100mm
Bandsnelheid
420m/min
Poids
0,05 kg
Diamètre
35mm
Longeur de coupe
18mm
Longueur
56mm
Rayon
R6,4
Rayon 2
R4,8
Queue
8mm
Faces de coupe
2
Poids
3 kg
Puissance
370W
Schuuroppervlakte
115x208mm
Ø Rotatie
2mm
Nominale snelheid
10000rpm
Vibrations
20000/min
Poids
0,05 kg
Diamètre
12mm
Longeur de coupe
25mm
Longueur
70mm
Queue
12mm
Faces de coupe
2
Poids
150 kg
Dimensions
130 × 80,5 × 190 cm
Moteur
2 PK
Voltage
230 V
Sortie
203mm – 3x100mm
Air Speed
2270m³/h
Ventilateur
300mm
Niveau sonore
76dB
Poubelle
103L
Sac à filtrer
500x720mm
Sac
500x1050mm
Poids
2 kg
Poids
0,3 kg
Poids
250 kg
Moteur
1.5 CV, 2 PK
Voltage
230 V
Table de travail (sciage / fraisage)
940x410mm
Chariot table
400x250mm
Chariot longeur
1000mm
Hauteur de rainure
76,5mm
Trou de fraisage
140mm
Diamètre de l\' arbre
30 mm
Vitesse à vide (fraisage)
4500rpm, 6500rpm, 8500rpm
Profondeur de coupe 45°
40mm
Profondeur de coupe 90 °
60mm
Vitesse à vide (sciage)
4750rpm
Table de travail (rabotage-dégauchissage)
1085×256
Schaafbreedte
250mm
Profondeur de rabotage-dégauchissage
3mm
Table de travail (dégauchissage)
600x258mm
Profondeur de dégauchissage
2mm
Hauteur de la raboteuse
5-180mm
Vitesse d'alimentation de la raboteuse
5m/min
Vitesse à vide (arbre de rabotage)
4000rpm
Poids
140 kg
Voltage
230 V
Moteur
3.5 CV
Diamètre lame de scie
650mm
Max. diamètre de coupe
230mm
Diamètre
50mm, 100mm
Poids
1 kg
Dimensions
1500 cm
Diamètre
100mm
Poids
5,3 kg
Puissance
2500W
Toerental
6500 trm
Poids
6,5 kg
Puissance
1200W
Afmetingen schuurband
690x100mm
Schuuroppervlakte
175x100mm
Bandsnelheid
420m/min
Poids
0,05 kg
Diamètre
48,7mm
Longeur de coupe
26mm
Longueur
72mm
Rayon
R18
Queue
12mm
Faces de coupe
2
Poids
30 kg
Dimensions
130 × 45 × 40 cm
Poids
1 kg
Diamètre lame de scie
125mm, 150mm, 180mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,5mm
Epaisseur lame de scie
2,5mm
nombre de dents
12, 18, 24
Poids
0,30 kg
Poids
330 kg
Dimensions
1520 × 570 × 555 cm
Entrepointes
910 mm
Diamètre de tournage en guidage
520 mm
Tête rotative
Non
Cône de poupée mobile
MT 2
Moteur
2 PK
Filetage
M33
RPM Min-Max
50-3890
Voltage
230 V
Poids
250 kg
Moteur
3 CV, 4 CV
Voltage
230 V, 3 x 400V
Werktafel (zagen/frezen)
950x345mm
Sliding tafel
600x450mm
Sliding lengte
1300mm
Hauteur de rainure
100mm
Freesopening
200mm
Diamètre de l\' arbre
30 mm
Nominale snelheid (frezen)
1800rpm, 3000rpm, 6000rpm, 9000rpm
Profondeur de coupe 45°
60mm
Profondeur de coupe 90 °
75mm
Nominale snelheid (zagen)
4500rpm
Werktafel (schaven)
1110x265mm
Largeur de rabotage
265mm
Max. schaafdiepte
3mm
Werktafel (vandikte)
600x258mm
Max. afname vandikte
2mm
Doorlaathoogte vandikte
5-190mm
Aanvoersnelheid vandikte
5m/min
Nominale snelheid (schaafas)
4000rpm
Poids
7 kg
Poids
5 kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
2 kg
Diamètre
6mm, 8mm
Poids
1 kg
Diamètre lame de scie
315mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,2mm
nombre de dents
20
Poids
2 kg
Type lamel
Nr. 20
Poids
1 kg
Diamètre
125mm
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
2
nombre de dents
4
Longeur de coupe
32mm
Hauteur de rainure
50mm
RPM Min-Max
6100-10600
Poids
2,6 kg
Puissance
370W
Schuurdiameter
150mm
Ø Rotatie
4mm, 7mm
Nominale snelheid
4000-8000rpm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,2 kg
Poids
0,05 kg
Diamètre
44,5mm
Longeur de coupe
31,8mm
Longueur
70mm
Rayon
R12,7
Queue
12mm
Faces de coupe
2
Poids
16,5 kg
Capacité d\'épaisseur
5-103mm
Nombre de couteaux
2
Largeur de rabotage
250 mm
Poids
1 kg
Dimensions
600 cm
Diamètre
100mm
Poids
36 kg
Poids
2,7 kg
Largeur maximale des chants
50mm
Épaisseur maximale des chants
1mm
Température
1: 300°C, 2: 525°C
Débit d'air
400l/min
Filetage
M33
Ouverture maximale
889 mm
Poids
30 kg
Met kantenlijmer
PEB200+, PEB250+
Puissance
830W
Inhoud lijmbak
230cm³
Temperatuur (met PEB200+)
170°C
Werksnelheid (met PEB200+)
3.6m/min
Temperatuur (met PEB250+)
120 – 200°C
Werksnelheid (met PEB250+)
2-6m/min
Min-Max. hoogte band
10-62mm
Min-Max. dikte band
0.4-3mm
Poids
0,05 kg
Diamètre
100mm
Poids
1 kg
Diamètre
100mm
Poids
0,05 kg
Diamètre
38mm
Longeur de coupe
32mm
Longueur
70mm
Rayon
R19
Queue
12mm
Faces de coupe
2
Poids
85 kg
Poids
0,05 kg
Grain
K60, K80, K100, K120
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy