SHOWROOM MODEL
De TT305SLX is de grootste kap- en verstekzaag met trekfunctie op de markt. Ze is uitgerust met een geruisloze inductiemotor van 1600 W die geen onderhoud nodig heeft (wat een groot voordeel is ten opzichte van de koolborstelmotor in de kleinere modellen) en heeft een trekfunctie tot 350 mm, met een zaaghoogte tot 107 mm. De zaag kan in 2 richtingen tot 48° gekanteld worden.
Kreg KMS7448 Combo-Trak is a 1219 mm (48") long track that can be built into a surface. With this track, you can, for example, make your own router table. This double track has both a 9.5 x 19 millimetre track and a track for 1/4" (6 or 6.3 mm) bolts. The wide track can be used for a mitre guide, featherboards or other clamping device. Most of the regular bolts and clamps for t-track A and B fit in the narrow track.
Avec la brosse DuroNyl, vous pouvez accentuer la structure caractéristique du bois des surfaces en bois. Le traitement avec cette brosse permet d'éliminer le bois plus tendre des cernes annuels les plus récents, tout en laissant intact le bois plus dur des cernes annuels plus anciens.
Les surfaces en bois brossé trouvent leur application dans divers domaines, tels que la fabrication de meubles rustiques, l'aménagement de cafés et de restaurants rustiques (revêtement des murs et des plafonds) ou la construction de poutres.
Disponible dans différentes tailles de grains.
SHOWROOM MODEL
Standing wood splitter for two-hand operation. This powerful wood cleaver is perfect for semi-professional or home use. With the help of this splitting machine you can easily split wood pieces up to 1000mm in length (if extension 3GRLAKR is used) and 450mm in diameter. The table can be adjusted to three heights 520mm - 900mm or 1300mm. In terms of performance, this model is identical to the TT1350/12T with the difference that this model is equipped with a 6.5 HP gasoline engine (Briggs & Stratton). Up to 11 tons of pressure. Thanks to its compact design, this cleaver is easy to store or move. Easily movable thanks to the rubber tires.
With this panel pilot bit you can quickly make accurate openings in panels, doors and windows. The V-point plunges easily through the top layers of any panels including laminated materials. The carbide cutting edges cut clean and fast, guaranteeing a perfect finish of your projects. The pilot of the bit will act as a guide.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
The convex radius cutter by Sistemi Klein is perfect for machining the edges of cabinets, doors and drawers or columns. Using this router bit, create quarter-round grooves on most types of wood.
Equipped with a ball bearing for easier work. When using a large-diameter bit, it is advisable to carry out the machining in several steps.
Duro-Polish is ideal for polishing and pre-polishing stainless steel. Thanks to the abrasive's lamellar structure, the felt is not "burned" during the polishing process, preventing streaking. It is important to use DuroPol only in combination with the right polishing paste: pre-polishing paste should be used for pre-polishing, while gloss paste is suitable for high-gloss polishing. This combination allows you to achieve high-quality polishing results without leaving streaks.
La TT620/95CX est une scie à bras radial professionnelle qui combine puissance, précision et polyvalence.
OUTLET, packaging slightly damaged
The Timber Yard Pro TT315 is a powerful table saw with a 4 hp induction motor and carbide saw blade, which is equipped with a miter guide and a galvanised worktable.
DEMO MODEL, WITH HEIGHT-ADJUSTABLE SAW BLADE
These portable and compact planing and sawing machines 230V are unique on the market and one of a kind. 200mm planing width and 97mm cutting height in one machine. Equipped with an induction motor 2.8 HP.
Deze pennenwagen met pennenkap is als optie verkrijgbaar bij de combinatiemachines TT320N2CU en TT410N2CU.
Showroommodel
Stevige massief beuken werkbank met een werkvlak van 120mm dikte. De ideale werkbank voor de professional of voor uw werkplaats thuis. De werkbank is standaard uitgerust met twee gietijzeren, dubbelspillige bankschroeven. Deze dubbele spil zorgt ervoor dat de bankschroef steeds nauwkeurig en gelijkmatig aandraait. De gehele werkbank is al geolied bij levering. Het standaardpakket van deze werkbank omvat een paar bankhaken (Ø19mm) in vol staal. Vaste werkhoogte van 900mm. Op maat gemaakte opbergkasten om in het onderstel te monteren apart verkrijgbaar.
Content
De TT305SLX is de grootste kap- en verstekzaag met trekfunctie op de markt. Ze is uitgerust met een geruisloze inductiemotor van 1600 W die geen onderhoud nodig heeft (wat een groot voordeel is ten opzichte van de koolborstelmotor in de kleinere modellen) en heeft een trekfunctie tot 350 mm, met een zaaghoogte tot 107 mm.
Het gebruik van kogellagers op alle gewrichten zorgt voor een precieze draaibeweging van de tafel, de kop en het kantelsysteem. De zaag heeft een persgegoten aluminium behuizing en kan in 2 richtingen tot 48° gekanteld worden. De geruisloze, onderhoudsvrije inductiemotor van 1600 W met riemaandrijving levert een groot koppel en is achteraan geplaatst, waardoor de zaag een grote zaaghoogte (tot 107 mm) heeft. Het zaagblad heeft een diameter van 305 mm en 60 tanden. De zijsteunen zijn uitschuifbaar.
De TT305SLX is verder uitgerust met een horizontale D-handgreep.
Kreg KMS7448 Combo-Trak is a 1219 mm (48") long track that can be built into a surface. With this track, you can, for example, make your own router table. This double track has both a 9.5 x 19 millimetre track and a track for 1/4" (6 or 6.3 mm) bolts. The wide track can be used for a mitre guide, featherboards or other clamping device. Most of the regular bolts and clamps for t-track A and B fit in the narrow track.
Brosse en nylon DURONYL pour texturer les surfaces en bois. La structure caractéristique du bois est mise en évidence en travaillant avec la brosse. Les brosses enlèvent principalement le bois plus tendre des anneaux annuels les plus récents et laissent intact le bois plus dur des anneaux annuels les plus anciens. Les surfaces en bois brossé sont utilisées, entre autres, pour la fabrication de meubles rustiques, pour l'ameublement de cafés et restaurants rustiques (revêtements de murs et de plafonds) ou pour des poutres.
Standing wood splitter for two-hand operation. This powerful wood cleaver is perfect for semi-professional or home use. With the help of this splitting machine you can easily split wood pieces up to 1000mm in length (if extension 3GRLAKR is used) and 450mm in diameter. The table can be adjusted to three heights 520mm - 900mm or 1300mm. In terms of performance, this model is identical to the TT1350/12T with the difference that this model is equipped with a 6.5 HP gasoline engine (Briggs & Stratton). With the help of this engine, this log splitter delivers a force of up to 11 tons! This makes the cleaver suitable for splitting several types of wood. Thanks to its compact design, this cleaver is easy to store or move. Easily movable thanks to the rubber tires.
With this panel pilot bit you can quickly make accurate openings in panels, doors and windows. The V-point plunges easily through the top layers of any panels including laminated materials. The carbide cutting edges cut clean and fast, guaranteeing a perfect finish of your projects. The pilot of the bit will act as a guide.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
The convex radius cutter by Sistemi Klein is perfect for machining the edges of cabinets, doors and drawers or columns. Using this router bit, create quarter-round grooves on most types of wood.
Equipped with a ball bearing for easier work. When using a large-diameter bit, it is advisable to carry out the machining in several steps.
Polishing brush for polishing stainless steel, metal, lacquer, etc. Slat structure prevents the felt from burning. This brush allows you to achieve high-quality polishing results without leaving streaks.
Cette scie à bras radial professionnelle allie puissance, précision et polyvalence.
Elle est équipée d'un interrupteur de sécurité et d'un chemin de roulement à 8 roulements à billes.
La scie est réglable de manière pratique pour les coupes transversales, les coupes d'onglet, les chanfreins et les doubles coupes d'onglet.
Le moteur à induction (230 V et 400 V) silencieux et sans entretien est freiné.
Exécution très robuste et professionnelle de la colonne. Le système de guidage sur toute la longueur du bras (8 roulements à billes) assure une précision extrêmement élevée et une longue durée de vie. Le bloc moteur assure le retour automatique de la scie.
La machine est dotée d'un châssis très solide et stable avec une table durable. Un capot de scie fermé est fourni en série pour la sécurité, et le pointeur laser garantit que vous pouvez travailler clairement. Elle dispose de commandes faciles à utiliser et de graduations claires pour le réglage de la largeur, la profondeur et l'angle de coupe.
The Timber Boy TT315 is a powerful table saw with a powerful 4 hp induction motor. It is equipped with a miter guide with eccentric clamping and a galvanized work table and comes standard with an extension table (also galvanized), handles and wheels, making it ideally suited for prolonged outdoor use. The tungsten carbide saw blade has a diameter of 315 mm and a bore of 30 mm and can be tilted 45° with the convenient controls.
The legs of the base can be folded in in no time, so the machine can be easily transported in a passenger car.
These portable and compact planing and sawing machines 230V are unique on the market and one of a kind. Compared to all other smaller machines, they work with very powerful induction motors.
An induction motor has 30% more power than a carbon brush motor and is more than 40% quieter. Moreover, it is maintenance-free as no carbon brushes need to be replaced. Furthermore, they are driven in an industrial way by means of poly belts instead of classic V-belts. The construction of the frame is also very unique and robust, as 3.5 mm thick sheet steel is used. This together guarantees excellent performance, but also optimal resistance for your machine.
Very fast change from planer to sawing function by repositioning the belt.
The uniqueness of this is that these models work with a separate knife block for each operation. The independent drive provides the ideal speed for planing and sawing, so the planer and saw also rotate separately for safety. Thanks to the micro-lifting system of the planing tables, the planing depth can be set very accurately and smoothly, but the tables can also be closed completely in a quick way. By fully closing the tables, the saw table has a large work surface. This Universal 2.0 has a very clear and accurate scale for each setting.
The guide can be blocked both in front of and behind the work table, which guarantees stable and precise work. It can also be set at an angle with very clear reading, and this for both planing and sawing. For the sawing machine there is also a miter gauge with clear reading. The machine is designed to work with grooving cutters up to 10mm thickness.
The high-quality construction of these compact machines such as thick sheet steel, direct drive, induction motors, high-quality ball bearing, large and robust set and rotary handles give this machine an enormous comfort with excellent performance and an optimal service life.
The portable multifunctional woodworking machine is standard equipped with: clamping device, saw guide, saw blade with splitting wedge, ruler, cover plate, handle (thumbscrew), miter guide, insert, planer knives in knife block, bracket, operating manual.
Deze pennenwagen met pennenkap is als optie verkrijgbaar bij de combinatiemachines TT320N2CU en TT410N2CU.
Stevige massief beuken werkbank met een werkvlak van 120mm dikte. De ideale werkbank voor de professional of voor uw werkplaats thuis. De werkbank is standaard uitgerust met twee gietijzeren, dubbelspillige bankschroeven. Deze dubbele spil zorgt ervoor dat de bankschroef steeds nauwkeurig en gelijkmatig aandraait. De gehele werkbank is al geolied bij levering. Het standaardpakket van deze werkbank omvat een paar bankhaken (Ø19mm) in vol staal. Vaste werkhoogte van 900mm. Op maat gemaakte opbergkasten om in het onderstel te monteren apart verkrijgbaar.
Weight
34 kg
2 kg
0,3 kg
180 kg
0,05 kg
1 kg
0,05 kg
0,300 kg
200 kg
48 kg
36 kg
10 kg
200 kg
Dimensions
580 × 890 × 540 cm
121,9 cm
ND
ND
ND
ND
ND
10,7 × 10 cm
940 × 1150 × 770 cm
940 × 660 × 470 cm
ND
ND
215 × 79 × 90 cm
Additional information
Poids
34 kg
Dimensions
580 × 890 × 540 cm
Epaisseur de coupe maximale
107 mm
Puissance
1600 W
Coupe 0° x 0°
350 x 107 mm
Coupe 0° x 45°
240 x 94 mm
Coupe 45° x 0°
350 x 70 mm
Coupe 45° x 45°
240 x 70 mm, 55 x 55 mm
Diamètre lame de scie
305mm
Poids
2 kg
Dimensions
121,9 cm
Poids
0,3 kg
Grain
K60, K80, K46
Diamètre
∅120 x 100
Poids
180 kg
Moteur
6 PK
Max. lengte hout
1000mm
Max. Ø hout
450mm
Poids
0,05 kg
Diamètre
8mm
Longeur de coupe
19mm
Longueur
63mm
Faces de coupe
1+1
Poids
1 kg
Diamètre lame de scie
125mm, 150mm, 180mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
8,0mm
Epaisseur lame de scie
6,0mm
nombre de dents
12, 18, 24
Poids
0,05 kg
Diamètre
19mm
Longeur de coupe
14mm
Longueur
51mm
Rayon
R4,8
Queue
8mm
Faces de coupe
2
Poids
0,300 kg
Dimensions
10,7 × 10 cm
Gewicht
0,3 kg
Poids
200 kg
Dimensions
940 × 1150 × 770 cm
Voltage
230 V, 400 V
Diamètre lame de scie
350mm
Profondeur de coupe 45°
60mm
Profondeur de coupe 90 °
95 mm
Alésage
30 mm
Passage latérale
860 mm
Poids
48 kg
Dimensions
940 × 660 × 470 cm
Alésage
30 mm
Diamètre lame de scie
315mm
Profondeur de coupe 45°
50mm
Profondeur de coupe 90 °
90 mm
Moteur
4 CV
Table de travail
550 x 800 mm
Verlengtafel
450 x 810 mm
Inclinaison
45°
Poids
36 kg
Moteur
2.8 CV
Profondeur de coupe 90 °
97 mm
Largeur de rabotage
200 mm
Diamètre lame de scie
250mm
Voltage
230 V
Poids
10 kg
Poids
200 kg
Dimensions
215 × 79 × 90 cm
Hauteur du plan de travail
900mm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy