OUTLET, emballage légèrement endommagé
La Timber Yard Pro TT315 est une scie sur table puissante avec un moteur à induction de 4 CV et une lame de scie au carbure, équipée d'un guide d'onglet et d'une table de travail galvanisée.
SHOWROOM MODEL - UNUSED
The TT255UTC offers all the possibilities of a mitre saw and, thanks to its top table with guide, it is also ideally suited for cutting boards lengthwise. Its compactness and low weight make it particularly convenient to take with you when working on the move.
SHOWROOM MODEL, oude kleuren 2022
De Air Flux3500AS anti fire separator is het nieuwste lid in ons productgamma van stofzuigers. Het product wordt gekenmerkt door een compact en efficiënt ontwerp, ondersteunt door de 15 filters en de krachtige motorunit. Deze unit werd tevens voorzien van een vibrerende functie, om de filters schoon te houden. De filterreiniging kan bediend worden via de geïntegreerde bedieningskast. Er komen geen manuele handelingen aan te pas; alles kan automatisch ingesteld worden.
Deze stofzuiger behoort tot de geluiddempende fijnstofafzuigers. Bovendien werd het toestel op maat ontwikkeld voor uw (compacte) CNC-freesmachine, paneelzaag of schuurmachine.
De gesloten behuizing is gemaakt van 1,2 mm dik plaatstaal, voorzien van een mooi aangebrachte poedercoating. Deze gesloten behuizing biedt een optimale bescherming voor de filters, polyester micronfilterzakken. Het afval wordt opgevangen in een ontkoppelbare, mobiele metalen container. Zo wordt het onderhoud aanzienlijk vergemakkelijkt en wordt uw werkomgeving meer hygiënisch.
De afvalcontainer is voorzien van een makkelijk te ontgrendelen handgreep en een visueel controlevenster. De brede inlaat (200mm) maakt de afzuiger zeer geschikt ter integratie met een systeem met een hoog luchtdebiet. De rotor werd dynamisch gebalanceerd om geluidsniveau tot het minimum te beperken.
De afzuigunit werd voorzien van een anti-fire separator. Dit unieke systeem vermindert het risico op brandgevaar aanzienlijk en vormt een val voor grotere stukken houtafval (groter dan 25 x 25). De anti-fire separator bewijst zijn nut; uw omgeving wordt veiliger!
Tenslotte werd het toestel werd voorzien van een wielbasis, om een eenvoudige verplaatsing te garanderen.
Bandsaw blade with length 4670mm for use on the TT50BS or TT61BS band saw machine from Tendotools. This saw blade has 3 TPI (teeth per inch) and has a width of 25mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
This powerful diamond wall cutter is designed for pulling trenches for power lines. The device is equipped with high-quality electronics with built-in overload protection. At the same time, a current limitation was provided when the device was started up. This enhances safe and correct use, even for beginners. The desired milling width can be set quickly. Finally, it is possible to connect a hoover directly to the unit, which makes work considerably easier.
DEMO MODEL
Powerful belt sander for levelling and rough work. The LB31EA sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. Equipped with an integrated dust extractor and dust bag to allow the user to work comfortably and cleanly.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece.
Also available with connection for dust extraction as model LB31E.
Lame de scie à ruban d'une longueur de 2240mm à utiliser sur la scie à ruban TT312 de Tendotools. Ce ruban de scie a 14 TPI (dents par inch) et a une largeur de 13mm. Ce lame de scie à ruban bimétallique est très solide et, outre le bois ou le plastique, il convient même au sciage des alliages de métaux légers ou, par exemple, de l'aluminium. Il est également recommandé d'utiliser ces lames de scie pour une utilisation à long terme sur les bois durs.
Modèle de salle d'expo
Fraiseuse de haute qualité et puissante, utilisable dans n'importe quel atelier. La machine est réglable à quatre vitesses (avec affichage électronique) et dispose d'un moteur de 230V qui délivre 3HP. Cela permet à cette fraiseuse de traiter un large éventail d'applications. Travaillez confortablement et avec précision sur de multiples matériaux ou sur des bois durs et tendres. Convient pour les travaux de fraisage standard, de tenonnage, de rabattage ou de profilage à des vitesses plus élevées. Grâce à sa faible vitesse de 1800 tr/min, cette fraiseuse est également adaptée aux travaux de ponçage. Les vitesses plus élevées sont excellentes pour le fraisage des profils. Grâce à nos accessoires, fraises et adaptateurs, les possibilités de la fraiseuse TT100/4 sont infinies. Changement facile entre la rotation à droite ou à gauche pour une adaptation optimale à toute pièce.
Content
La Timber Boy TT315 est une scie de table puissante dotée d'un puissant moteur à induction de 4 CV. Elle est équipée d'un guide d'onglet à serrage excentrique et d'une table de travail galvanisée. Il est fourni en série avec une table d'extension (également galvanisée), des poignées et des roues, ce qui la rend idéale pour une utilisation extérieure prolongée. La lame en carbure de tungstène a un diamètre de 315 mm et un alésage de 30 mm et peut être inclinée de 45° à l'aide de la commande pratique.
Les pieds du châssis peuvent être repliés en un rien de temps, de sorte que la machine peut être transportée facilement dans une voiture particulière.
The TT255UTC offers all the possibilities of a mitre saw and, thanks to its top table with guide, it is also ideally suited for cutting boards lengthwise. Its compactness and low weight make it particularly convenient to take with you when working on the move.
The use of ball bearings on all joints ensures precise rotation of the table, head and tilting system. The compact and lightweight saw has a die-cast aluminum body, a very compact 255 mm saw blade with 48 teeth, a large, easily adjustable top table with robust guide and a clear mitre indicator. The motor has belt drive, which provides great torque, and is positioned at the rear, giving the saw a large cutting height.
The TT255UTC is further equipped with an ergonomic vertical D handle, which ensures that the up and down movement is performed from the wrist rather than the shoulder. An added benefit of this handle is that it can be used with either the left or right hand.
De Air Flux 3500AS anti fire separator is het nieuwste lid in ons productgamma van stofzuigers. Het product wordt gekenmerkt door een compact en efficiënt ontwerp, ondersteunt door de 15 filters en de krachtige motorunit. Deze unit werd tevens voorzien van een vibrerende functie, om de filters schoon te houden. De filterreiniging kan bediend worden via de geïntegreerde bedieningskast. Er komen geen manuele handelingen aan te pas; alles kan automatisch ingesteld worden.
Deze stofzuiger behoort tot de geluiddempende fijnstofafzuigers. Bovendien werd het toestel op maat ontwikkeld voor uw (compacte) CNC-freesmachine, paneelzaag of schuurmachine.
De gesloten behuizing is gemaakt van 1,2 mm dik plaatstaal, voorzien van een mooi aangebrachte poedercoating. Deze gesloten behuizing biedt een optimale bescherming voor de filters, polyester micronfilterzakken. Het afval wordt opgevangen in een ontkoppelbare, mobiele metalen container. Zo wordt het onderhoud aanzienlijk vergemakkelijkt en wordt uw werkomgeving meer hygiënisch.
De afvalcontainer is voorzien van een makkelijk te ontgrendelen handgreep en een visueel controlevenster. De brede inlaat (200mm) maakt de afzuiger zeer geschikt ter integratie met een systeem met een hoog luchtdebiet. De rotor werd dynamisch gebalanceerd om geluidsniveau tot het minimum te beperken.
De afzuigunit werd voorzien van een anti-fire separator. Dit unieke systeem vermindert het risico op brandgevaar aanzienlijk en vormt een val voor grotere stukken houtafval (groter dan 25 x 25). De anti-fire separator bewijst zijn nut; uw omgeving wordt veiliger!
Tenslotte werd het toestel werd voorzien van een wielbasis, om een eenvoudige verplaatsing te garanderen.
Bandsaw blade with length 4670mm for use on the TT50BS or TT61BS band saw machine from Tendotools. This saw blade has 3 TPI (teeth per inch) and has a width of 25mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
This powerful diamond wall cutter is designed for pulling trenches for power lines. The device is equipped with high-quality electronics with built-in overload protection. At the same time, a current limitation was provided when the device was started up. This enhances safe and correct use, even for beginners. The desired milling width can be set quickly. Finally, it is possible to connect a hoover directly to the unit, which makes work considerably easier.
Powerful belt sander for levelling and rough work. The LB31EA sander is very stable and suitable for two-handed use. With the help of the large sanding surface, this machine achieves a high efficiency. The high stability in turn ensures a beautiful and scratch-free finish for your workpiece. The machine is equipped with stoppers in high quality carbide (widia) to prevent wear and tear on the housing. Equipped with an integrated dust extractor and dust bag to allow the user to work comfortably and cleanly. Several sanding belts with different grit sizes are optionally available.
Thanks to its larger sanding area (175x100mm) Virutex distinguishes itself from all other belt sanders on the market. The larger surface area increases stability and the machine always remains perfectly balanced & flat on your workpiece.
Also available with connection for dust extraction as model LB31E.
Lame de scie à ruban d'une longueur de 2240mm à utiliser sur la scie à ruban TT312 de Tendotools. Ce ruban de scie a 14 TPI (dents par inch) et a une largeur de 13mm. Ce lame de scie à ruban bimétallique est très solide et, outre le bois ou le plastique, il convient même au sciage des alliages de métaux légers ou, par exemple, de l'aluminium. Il est également recommandé d'utiliser ces lames de scie pour une utilisation à long terme sur les bois durs.
Fraiseuse de haute qualité et puissante, utilisable dans n'importe quel atelier. La machine est réglable à quatre vitesses (avec affichage électronique) et dispose d'un moteur de 230V qui délivre 3HP. Cela permet à cette fraiseuse de traiter un large éventail d'applications. Travaillez confortablement et avec précision sur de multiples matériaux ou sur des bois durs et tendres. Convient pour les travaux de fraisage standard, de tenonnage, de rabattage ou de profilage à des vitesses plus élevées. Grâce à sa faible vitesse de 1800 tr/min, cette fraiseuse est également adaptée aux travaux de ponçage. Les vitesses plus élevées sont excellentes pour le fraisage des profils. Grâce à nos accessoires, fraises et adaptateurs, les possibilités de la fraiseuse TT100/4 sont infinies. Changement facile entre la rotation à droite ou à gauche pour une adaptation optimale à toute pièce.
Weight
48 kg
18 kg
300 kg
0,5 kg
4,5 kg
6,5 kg
0,5 kg
188 kg
Dimensions
940 × 660 × 470 cm
620 × 490 × 420 cm
730 × 1730 × 2280 cm
ND
ND
ND
ND
ND
Additional information
Poids
48 kg
Dimensions
940 × 660 × 470 cm
Alésage
30 mm
Diamètre lame de scie
315mm
Profondeur de coupe 45°
50mm
Profondeur de coupe 90 °
90 mm
Moteur
4 CV
Table de travail
550 x 800 mm
Table de rallonge
450 x 810 mm
Inclinaison
45°
Poids
18 kg
Dimensions
620 × 490 × 420 cm
Epaisseur de coupe maximale
40 mm
Voltage
230 V
Puissance
1600 W
Coupe 0° x 0°
150 x 70 mm
Coupe 0° x 45°
100 x 70 mm
Coupe 45° x 0°
150 x 45 mm
Coupe 45° x 45°
55 x 45 mm
Diamètre lame de scie
255 mm
Poids
300 kg
Dimensions
730 × 1730 × 2280 cm
Puissance
4PK
aantal filters
15
Filter afmetingen
160 x 1030 mm
filtratie oppervlakte
7.75 m2
afvalopslag
metalen container (60x60x72cm)
capaciteit
3500m3
Poids
0,5 kg
Longueur
4670mm
Largeur
25mm
Dikte
0,90mm
Poids
4,5 kg
Poids
6,5 kg
Puissance
1200W
Afmetingen schuurband
690x100mm
Schuuroppervlakte
175x100mm
Bandsnelheid
420m/min
Poids
0,5 kg
Longueur
2240mm
Largeur
13mm
Largeur
0,65mm
Poids
188 kg
Moteur
3 CV
Voltage
230 V
Diamètre de l\' arbre
30 mm
Vitesse à vide
1800rpm, 3000rpm, 6000rpm, 9000rpm
Trou de fraisage
200mm
Hauteur de rainure
100mm
Table de travail
690x480mm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy