Modèle de salle d'expo
La Timber Boy TT315 est une scie de table puissante avec un moteur à induction de 2,6 ch et une lame en carbure de tungstène, qui est équipée d'un guide d'onglet et d'une table de travail galvanisée.
A workpiece is clamped securely in a vice. Sparky offers you the solution with their sturdy vices, designed entirely in cast iron, which adds to their sturdiness. With the help of this vice, you can work on your workpieces in different ways. The vice can be adjusted by means of the rotating spindle, which is operated by a wrench. The clamping plates are equipped with a rubber protection, so that your material will not be damaged during clamping. The vice has V-shaped grooves to support vertical and horizontal fastening of round pieces.
MODÈLE D'EXPOSITION - NOUVEAU
La ponceuse TT1220 peut être utilisée verticalement, horizontalement ou à n'importe quel angle. La grande table en aluminium peut être inclinée jusqu'à 45° et est équipée d'un rapporteur.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 40mm Nr. 0058 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Pièce de réduction à utiliser avec les modèles differents des aspirateurs Air Flux. A couper sur le propre diamètre.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Capot transparant avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La taille de l'ouverture du capot anti-poussière est de 200x200mm. Avec couverture.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Content
La Timber Boy TT315 est une scie de table puissante avec un puissant moteur à induction de 2,6 ch. Elle est équipée d'un guide d'onglet à serrage excentrique et d'une table de travail galvanisée. Il est fourni en série avec une table d'extension (également galvanisée), des poignées et des roues, ce qui la rend idéale pour une utilisation extérieure prolongée. La lame en carbure de tungstène a un diamètre de 315 mm et un alésage de 30 mm et peut être inclinée de 45° à l'aide de la commande pratique.
Les pieds du châssis peuvent être repliés en un rien de temps, de sorte que la machine peut être transportée facilement dans une voiture particulière.
Anyone who wants to clamp his workpiece should use high-quality clamps. Sparky offers you the solution, designed entirely in cast iron, which makes it more solid. With the help of this vice, you can work on your workpieces in different ways. The vice can be adjusted by means of the rotating spindle, which is operated by a wrench. The clamping plates are equipped with a rubber protection, so that your material will not be damaged during clamping. The vice has V-shaped grooves to support vertical and horizontal fastening of round pieces.
La ponceuse TT1220 peut être utilisée verticalement, horizontalement ou à n'importe quel angle. La grande table en aluminium peut être inclinée jusqu'à 45° et est équipée d'un rapporteur. La table de travail est supportée des deux côtés pour une utilisation de précision. Elle est équipée d'une poignée en D pour un transport facile et d'un système de bande à poncer à serrage rapide pour des changements rapides. La bande peut être facilement équilibrée grâce à la molette très pratique. La machine dispose également d'une buse d'aspiration de 60 mm.
Cette ponceuse est livrée par défaut avec une bande et un disque à poncer avec un grain 80. Les grains 60, 100, 120 et 150 sont également disponibles pour le disque. Les grains 60, 100, 120, 150 et 220 sont également disponibles pour le disque.
Peut être utilisée universellement pour le ponçage des arêtes, des surfaces et des arrondis.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 40mm Nr. 0058 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Pièce de réduction à utiliser avec les modèles differents des aspirateurs Air Flux. A couper sur le propre diamètre.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Capot transparant avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La taille de l'ouverture du capot anti-poussière est de 200x200mm. Avec couverture.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Weight
48 kg
ND
50 kg
0,05 kg
0,05 kg
0,5 kg
0,05 kg
1 kg
0,05 kg
Dimensions
940 × 660 × 470 cm
ND
ND
ND
0,4 cm
ND
ND
20 × 20 cm
ND
Additional information
Poids
48 kg
Dimensions
940 × 660 × 470 cm
Alésage
30 mm
Diamètre lame de scie
315mm
Profondeur de coupe 45°
50mm
Profondeur de coupe 90 °
90 mm
Moteur
2.6 CV
Table de travail
550 x 800 mm
Table de rallonge
450 x 810 mm
Inclinaison
45°
Poids
50 kg
Inclinaison
45°
Puissance
750W
Grain
K60, K80, K100, K120, K220, 150
Table de travail
200 x 335 mm
Disque
255 mm
Bande à poncer
1250 x 150 mm
Poids
0,05 kg
Diamètre
18mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2+1
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,5 kg
Poids
0,05 kg
Diamètre
19mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2
Poids
1 kg
Dimensions
20 × 20 cm
Diamètre
100mm
Poids
0,05 kg
Diamètre
20mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy