Modèle d'exposition ! Machine inutilisée
Une machine compacte aux multiples possibilités
Grandes roues pivotantes, pour un fonctionnement régulier.
2.2KW 3 HP
2 vitesses Courroie en poly 10 000 et 8 000 tr/min
Tourner à gauche et à droite
Opération par le haut
Comprend une broche de 30 mm, une broche interchangeable de 20 mm et des douilles de serrage pour la défonceuse.
Châssis sur roues inclus
Showroommodel
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container.
Attention: this hand gluer comes standard with a rubber roller, suitable for vinyl (white) adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T).
Volledige set buizen en accessoires voor bevestiging aan de muur in atelier, om met één stofzuiger afzuiging te voorzien aan elke machine.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to use on the Belmash SDR2200
This mortiser with 16 mm Westcott chuck is available as an option with the combination machine TT32K5SL.
Sale
Ideal for regrinding curved tools, gouges, cutting and woodturning tools. Convex and concave diamond surface in one grinding tool. Re-grinding of tools with a radius of min. 1.6 to max. 25 mm. Includes non-slip pad for easier use. No oil required - grind dry or with water.
Lame de scie avec 28 dents
Lame de scie avec denture plate (FZ) et peu de dents pour une coupe de long et travers vite de tous les bois naturels. A utiliser sur les scies à table. Lame de scie silencieuse
SHOWROOM MODEL - NEW
Powerful, robust surface planing and thicknessing machine with induction motor, suitable for every workshop. This machine is available with a 230V or three-phase 400V motor. Thanks to its sturdy steel design with cast iron worktops, it can withstand heavy daily use. The work tables are fitted with a heavy profile at the bottom to maintain their flatness at all times. The tables are hinged independently and can be raised. For very precise planing, this machine is equipped with a sturdy, aluminium guide at the top. This guide can be set at an angle with two stops for 90° and 45°.
This machine is equipped with planing blades of 1.5mm thickness as standard. Thicker planing blades (3mm) are available on request.
The hose's unique segmented design allows it to expand, contract and twist to the shape that works best for your space and then hold that position, giving you almost limitless possibilities to improve your dust collection system. The hose has a length of 30 to 90 cm. The ability to bend, expand or contract around obstacles to fit perfectly in a given space and maintain its shape makes the FlexHold hose ideal for tight spots and tricky dust collection applications where conventional hoses just don't work. You will find countless ways to use this smart product.
Content
Une machine compacte aux multiples possibilités
Grandes roues pivotantes, pour un fonctionnement régulier.
2.2KW 3 HP
2 vitesses Courroie en poly 10 000 et 8 000 tr/min
Tourner à gauche et à droite
Opération par le haut
Comprend une broche de 30 mm, une broche interchangeable de 20 mm et des douilles de serrage pour la défonceuse.
Châssis sur roues inclus
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. Simply press the trigger to run the glue over the roll. Using this trigger you will always obtain the right amount of glue for your project. Thanks to the support, the hand gluer can easily be put away. For cleaning, you can keep this adhesive under water without risk of damage.
Attention: this adhesive comes standard with a rubber roller, suitable for vinyl adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T).
Volledige set buizen en accessoires voor bevestiging aan de muur in atelier. Deze muurkit is ideaal voor kleine ateliers: met één stofzuiger wordt stofafzuiging voorzien aan elke machine.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDR2200.
This 250 x 370 mm mortiser with a 16 mm Westcott chuck is available as an option with the combination machine TT32K5SL.
Ideal for regrinding curved tools, gouges, cutting and woodturning tools. Convex and concave diamond surface in one grinding tool. Re-grinding of tools with a radius of min. 1.6 to max. 25 mm. Includes non-slip pad for easier use. No oil required - grind dry or with water.
Lame de scie avec 28 dents
Lame de scie avec denture plate (FZ) et peu de dents pour une coupe de long et travers vite de tous les bois naturels. A utiliser sur les scies à table. Lame de scie silencieuse
Powerful, robust planer thicknesser with induction motor, suitable for every workshop. This machine is available with a 230V or three-phase 400V motor. Thanks to its sturdy steel design with cast iron worktops, it can withstand heavy daily use. The work tables are fitted with a heavy profile at the bottom to maintain their flatness at all times. The tables are hinged independently and can be raised. In this way, you can make maximum use of the capabilities of the thicknessing machine.
This thicknessing machine is easily adjustable by means of a smoothly rotating, steplessly spinning wheel. Equipped with a millimetre scale so you can easily read off the correct height. During work, the thicknessing unit remains in position without any problems thanks to the locking device. In combination with the feed speed of 6m/min, this ensures a very smooth, even finish on all your workpieces.
For very precise planing, this machine is equipped with a sturdy, aluminium guide at the top. This guide can be set at an angle with two stops for 90° and 45°. With the help of the heavy planing block, equipped with three planing blades, a good finish is always guaranteed. The chips are discharged via a hinged hood. This hood can be connected to a dust extraction system using the Ø100mm outlet. This machine is equipped with planing blades of 1.5mm thickness as standard. Thicker planing blades (3mm) are available on request.
The hose's unique segmented design allows it to expand, contract and twist to the shape that works best for your space and then hold that position, giving you almost limitless possibilities to improve your dust collection system. The hose has a length of 30 to 90 cm. The ability to bend, expand or contract around obstacles to fit perfectly in a given space and maintain its shape makes the FlexHold hose ideal for tight spots and tricky dust collection applications where conventional hoses just don't work. You will find countless ways to use this smart product.
Weight
200 kg
2 kg
2 kg
3,3 kg
25 kg
2 kg
1 kg
272 kg
0,5 kg
Dimensions
ND
ND
ND
30 × 26 × 7 cm
ND
ND
ND
115,5 × 52,5 × 95,5 cm
ND
Additional information
Poids
200 kg
Poids
2 kg
Breedte lijmrol
122mm
Inhoud lijmbak
1kg, 1,4kg
Poids
2 kg
Poids
3,3 kg
Dimensions
30 × 26 × 7 cm
Max. hoogte werkstuk
63mm
Max. breedte werkstuk
270mm
Poids
25 kg
Mandrin
16 mm
Boortafel
250 x 370 mm
Poids
2 kg
Poids
1 kg
Diamètre lame de scie
350mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,5mm
Epaisseur lame de scie
2,5mm
nombre de dents
28
Orifices de traction
PH02
Poids
272 kg
Dimensions
115,5 × 52,5 × 95,5 cm
Moteur
4 CV, 5 CV
Voltage
230 V, 3 x 400V
Largeur de rabotage
310 mm
Schaaftafel afmetingen
1380x310mm
Ø schaafas
70mm
Nominale snelheid schaafas
4800rpm
Aantal schaafmessen
3
Schaafmes afmetingen
310x19x1mm
Max. schaafdiepte
4mm
Vandiktetafel afmetingen
540x306mm
Doorlaathoogte vandikte
225mm
Vandikte afname
3mm
Aanvoersnelheid vandikte
6m/min
Poids
0,5 kg
Diamètre
63,5mm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy