| Description | La TT140 est une ponceuse de contours à mouvement oscillant et table de travail basculante, qui est livrée en standard avec 3 rouleaux de ponçage. | The Kreg Multi-Mark adjustable square square, also called block square, has a plastic block. This block contains a spirit level and the ruler can be slid onto the block, which is provided with a measurement on both sides: one side in millimeters, the other side in inches. The metric side has a graduation on one side that starts at 0 and runs to 152 mm, the other side starts at 152 mm and continues to 304 mm.
The Multi-Mark is a measuring tool that can be used in various ways; as spirit level, adjustable block hook, depth gauge, but also, for example, for adjusting the height of saw blades or router bits and cutterheads.
With the square you can measure and mark angles of 90º, but also set it obliquely like a double square. Handy for transferring an angle when measuring and marking. | Dissolves stubborn dirt such as oil, grease, wax, tar, rubber, wear marks and adhesive or silicone residues. Can also be used as a degreaser. Netspray removes residues from self-adhesive labels and is very effective for cleaning prior to the application of adhesives. Recommended to use when working with the edge adhesives from the Virutex range. Irriteert de huid niet en heeft een aangename citrusgeur. | This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVE660 or SVE670 model. No direct connection to the electric vacuum system SVE600 as model SVE660 or SVE670. |
| Content | Avec cette ponceuse à rouleau oscillant, le ponçage de pièces rondes devient un jeu d'enfant.
Ce modèle de table est compatible avec différentes épaisseurs de rouleaux de ponçage. Grâce au mouvement de haut en bas (oscillation) du rouleau de ponçage, la ponceuse ne laisse pas de stries sur le bois. Elle est fournie par défaut avec trois rouleaux de ponçage (20 x 90 mm, 35 x 140 mm et 50 x 140 mm) et cinq inserts. L'interrupteur marche-arrêt est doté d'une protection contre les sous-tensions, conformément à la norme IP54. La machine est également équipée d'une buse d'aspiration sur laquelle on peut placer un dépoussiéreur. Le bâti est équipé d'une tablette pratique sur laquelle on peut placer les rouleaux de ponçage et les inserts.
La table de travail peut être inclinée à 45° pour un ponçage en angle. | The Kreg Multi-Mark adjustable square square, also called block square, has a plastic block. This block contains a spirit level and the ruler can be slid onto the block, which is provided with a measurement on both sides: one side in millimeters, the other side in inches. The metric side has a graduation on one side that starts at 0 and runs to 152 mm, the other side starts at 152 mm and continues to 304 mm.
The Multi-Mark is a measuring tool that can be used in various ways; as spirit level, adjustable block hook, depth gauge, but also, for example, for adjusting the height of saw blades or router bits and cutterheads.
With the square you can measure and mark angles of 90º, but also set it obliquely like a double square. Handy for transferring an angle when measuring and marking. | Dissolves stubborn dirt such as oil, grease, wax, tar, rubber, wear marks and adhesive or silicone residues. Can also be used as a degreaser. Netspray removes residues from self-adhesive labels and is very effective for cleaning prior to the application of adhesives. Recommended to use when working with the edge adhesives from the Virutex range. Irriteert de huid niet en heeft een aangename citrusgeur. | This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVE660 or SVE670 model. No direct connection to the electric vacuum system SVE600 as model SVE660 or SVE670. |
