Set de couteaux profilés hauteur 40mm Nr. 0042 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
This professional set contains six parts and consists of high-quality TCT diamond hole saws. The set is hard-wearing and has sturdy teeth that ensure durability and longer life. The chip area has been improved, allowing quick chip removal. This hole saw set is suitable for cutting plasterboard, aerated concrete, wood, laminate and PVC. The set includes a centring drill and five different bell drills with diameters of 35, 40, 54, 60 and 65 millimetres.
Whether you are starting from scratch, renovating or repairing, the drawer front assembly tool is the simple and effective way to assemble and align drawer fronts. It removes the need to use one hand to hold pieces in place while you work. The thick steel design features large clamp pads, a GripMaxx non-slip surface and ribbed corners to minimize flexibility and maintain project stability.
The Drawer Front Mounting Tool reduces the clumsy hassle and repositioning required and simplifies the process to three simple steps: clamp, align, attach.
Includes left and right Carrier front mounting tools.
Combine it with the Setup and Spacer Shims (sold separately) for accurate and consistent openings and sight lines.
SALE
Economy -system REKORD : 14-piece set of cutterheads for making windows and frames
Unique for the production of frames, windows and doors according to the Dutch standard profiles.
Bore 40 mm.
rekord cutterhead nr 128 1,00
rekord cutterhead nr 999 1,00
rekord cutterhead nr 918 1,00
rekord cutterhead nr 921 1,00
rekord cutterhead nr 922 1,00
rekord cutterhead nr 938 1,00
rekord cutterhead nr 916a 2,00
adjusting ring d40x21.5 1,00
adjusting ring d40x17.0 1,00
adjusting ring d40x14.0 1,00
adjusting ring d40x9.5 2,00
adjusting ring d40x9.0 1,00
Tuyau anti-statique longueur 6 mètre diamètre 100 mm. A utiliser en combinaison avec les extracteurs de poussière Air Flux.
This rotary hammer is designed for real, heavy-duty work. Chiselling and drilling into concrete are no problem for this strong machine. This drill is equipped with an electro-pneumatic function, which moves the drill forward in the material. This hammer function is stronger than in an ordinary drill. Equipped with an SDS quick-action chuck. Furthermore, the machine was equipped with an ergonomic handle with soft grip (both housing and handle are vibration-damping), magnesium gearbox, safety clutch and trigger speed control. The housing consists of one part (monoblock). The number of strokes per minute is 2800. Drilling into concrete up to 40 mm. Torque of 130 Nm. Overloading of the unit is indicated by means of an LED.
The TT915 sander can be used, among other things, for deburring and sanding surfaces and accurate finishing of contours. This compact tabletop model is easy to move, yet very stable thanks to its cast-iron base.
Porte outil à moulurer avec des plaquettes réversibles et araseurs en carbure de haute qualité (HW). Les plaquettes sont alternativement à un angle différent pour un meilleur résultat de coupe. Grâce aux araseurs en haut et en bas, votre travail de fraisage est toujours propre. Parfait pour fraiser des rabais. Grâce aux lames en carbure de tungstène, cette fraise à rainurer coupe sans effort les planches massives, les bois durs et tendres, le MDF ou les planches laminées.
Disponible avec un alésage de 30 mm ou 50 mm.
Showroom model
The TT400 is a heavy-duty cut-and-miter saw for stationary use, equipped with a quiet, maintenance-free 3400 W (4.5 HP) induction motor, which can be used for both aluminium and wood.
This durable rod fits standard mitre grooves of 19 x 9 mm. With eight nylon screws along the entire length of the rod to avoid any play in the groove. Mounting holes are provided every 127 mm. Ideal for fixing moulds and clamps.
Lichte en krachtige mini vlakschuurmachine voor het polijsten en afwerken van uw werkstukken. Deze machine onderscheidt zich van het model LR84H door zijn dubbele beweging. De schuurzool beweegt zowel roterend als excentrisch. Standaardlevering met Delta opzetstuk en ronde schuurplaat (Ø125mm). Voorzien van een geïntegreerde stofafzuiging en stofzak. Met elektronische snelheidsregeling en remsysteem voor de schuurzool.
Optioneel verkrijgbaar in een handige PVC koffer.
The Accu-CutTM guide rail is a circular saw accessory that ensures perfectly straight and splinter-free cuts. The Accu-Cut guides the circular saw along an aluminium rail, which keeps the saw straight and allows easy adjustment by aligning the rail with the cutting line. Anti-slip guide strips secure the guide and prevent splinters.
Straight, precise and splinter-free cuts
- Longitudinal, trimming and diagonal cuts in plywood, MDF and boards up to 120 cm long.
- To saw accurately, simply align the guide rail with the markings.
- Anti-slip guide strips keep the rail in place and prevent it from jamming.
- Anti-splinter strips prevent the material from splintering during sawing.
- Start cutting quickly with a starting block that supports the saw and allows the blade guard to operate normally.
- Use the universal carriage to mount practically any circular saw, on the left or right.
- The Kreg Rip-CutTM is compatible with the universal carriage.
- Instead of having to bring your material to the saw, you bring the saw to the material.
Rechte slijpmachines zijn ideaal voor slijpklussen op moeilijk bereikbare plekken. De rechte slijper van Sparky is licht en compact, wat het makkelijk hanteerbaar maakt. De rechte slijper wordt aangesloten op netstroom. Dit model leent zich uitstekend om te frezen, polijsten en graveren. Onmisbaar voor nauwkeurige werkzaamheden.
MODÈLE DE DÉMONSTRATION, UNE SEULE PIÈCEMODÈLE AVEC PEB250
Plaqueuse de chants PEB200+ ou PEB250+ monté dans une table extensible pour le traitement stationnaire de pièces plus grandes. Cette plaqueuse de chants à boîte à colle fait sans problème les chants en PVC, ABS, mélamine ou bois sur des panneaux droits, ronds ou de forme. La machine est adaptée au traitement d'une bande de chant d'une épaisseur comprise entre 0,4-3 mm et 10-62 mm de hauteur. Choix de la table avec le modèle PEB200+ ou PEB250+. Les deux conviennent au collage des mêmes côtés avec une différence importante. Le modèle PEB250+ dispose d'un contrôle de la vitesse et de la température. La table est équipée d'un support pour les rouleaux et d'un coupe en arrière manuel.
Plaqueuse de chants PEB200TRC ou PEB250TRC est, comme tous les autres modèles Virutex, équipé d'un bac à colle breveté recouvert de Téflon®. Ce revêtement offre des avantages très importants par rapport aux machines comparables. Après utilisation, il est très facile de nettoyer à nouveau le bac à colle, ce qui rend cette plaqueuse beaucoup plus facile à entretenir.
Cette fraise à chanfrein réglable avec des plaquettes en carbure de tungstène de haute qualité vous offre une grande flexibilité pour réaliser des chanfreins. La fraise est réglable des deux côtés entre 0° et 70° par incréments de 1°. Utilisez la fraise à la fois pour chanfreiner le bois et les planches. Grâce aux lames en carbure de tungstène, cette fraise à rainurer coupe sans effort les planches massives, les bois durs et tendres, le MDF ou les planches laminées.
La hauteur maximale de fraisage à 0° est de 48 mm, à 70° elle est de 15 mm.
SALES
With this edge router, you have affordable automation. Large adjustable carrier plate covered with Teflon carriers. You mill the side, corner and top in one movement from right to left.
Lame de scie à ruban d’une longueur de 3345mm à utiliser sur la scie à ruban TT400 de Tendotools. Ce ruban de scie a 3 TPI (dents par inch) et a une largeur de 20mm. Cette lame en acier trempé "Flexback" est très adapté au sciage polyvalent. Utilisez cette lame de scie pour le bois et le plastique. Les dents de la lame de scie ont reçu un traitement thermique supplémentaire pour augmenter leur dureté. Cela permet de garder la ruban très souple et d'augmenter votre confort de coupe grâce à la dureté des dents.
Avec cet ensemble de trois protecteurs, vous pouvez faire de votre serre-joint Piher PRL400 comme neuve.
Les protecteurs peuvent simplement cliquer sur la serre-joint lorsque les protecteurs d'origine sont trop endommagées.
SHOWROOM MODEL, including remote control!
This dust extractor is equipped with a 2HP induction engine capable of delivering a steady airflow of 2270m³/h. Thanks to the cyclone collector unit, the wood particles and dust (99.9%) are separated from the air flow before they enter the filter cartridge. As the wood particles do not pass through the fan unit, optimum airflow and dust collection are constantly guaranteed. The dust (99.9%) is collected in a metal waste bin with a viewing window. This drum was fitted with a one-hand clamp and separate wheels for quick and easy emptying. The remaining dust passes through a Canister filter cartridge with automatic filter cleaning. Thanks to this cartridge, the dust is filtered between 0.2µm and 2µm towards a PVC residual bag.
Met het afkorthulpstuk Kreg Portable Crosscut kunt u snel en accuraat planken tot 203 mm breed afkorten met uw cirkelzaag. Met dit hulpstuk zaagt u nauwkeurig hoeken van 90° én 45°.
De Kreg Portable Crosscut bevat een steunrand voor uw cirkelzaag. Hierdoor blijft de zaag stabiel, van het begin tot het einde van de zaagsnede. Dit maakt het nauwkeurig afkorten een stuk gemakkelijker en hoeft u niet meer te twijfelen of u wel recht zaagt.
Het afkorthulpstuk beschikt over een verstelbare geleidearm, de retractable cutline indicator, waarmee u precies kunt instellen waar uw zaagblad komt. U stelt het hulpstuk precies in voor uw machine. Hierdoor is het ideaal voor herhaalwerkzaamheden, omdat u het hulpstuk niet elke keer opnieuw hoeft in te stellen.
Dankzij het speciale antislipmateriaal heeft de Kreg Portable Crosscut een ferme grip op het hout en blijft het hulpstuk uitstekend op zijn plaats, zodat u altijd een nauwkeurig resultaat bereikt.
Universele wielkit om te gebruiken onder uw houtbewerkingsmachine. Maximum draagkracht 600kg op een maximum grootte van 750x860mm.
Een onmisbare tool voor elke klusser. Een multitool waar je alles mee kan. Deze haakse slijper (vermogen 2300W) is uitermate geschikt voor het zwaardere slijpwerk. Hij wordt aangedreven middels netstroom. De slijper kan gebruikt worden voor het doorslijpen van metaal, hout en steen kun je de haakse slijper ook gebruiken voor het wegslijpen van roest en afbramen van metaal.
MODÈLE D'EXPOSITION - NOUVEAU
Rabot-dégau puissante et robuste avec moteur à induction, adaptée à chaque atelier. Cette machine est disponible avec un moteur 230V ou 400V triphasé. La conception robuste en acier avec des surfaces de travail en fonte rend cette machine résistante à un usage quotidien intensif. Les tables de dégauchissage sont équipées d'un profil lourd en bas pour maintenir la planéité à tout moment. Les tables sont articulées indépendamment et peuvent être relevées. Afin de pouvoir dégauchir très précisément, cette machine est équipée d'un solide guide en aluminium sur le dessus. Ce guide peut être réglé à un angle avec deux butées pour 90° et 45°.
Cette machine est livrée en standard avec des fers de rabotage d'une épaisseur de 1,5 mm. Des fers de rabotage plus épaisses (3 mm) sont disponibles sur demande.
SHOWROOM MODEL, version 2022
To make briquettes from sawn wood, sawdust, filter dust, and other similar materials. The feeder continuously fills the channel of the pressing unit. The transit brings the material to the pre-compressor. A hydraulic cylinder pushes the material into the press chamber. The press pieces, which are also hydraulically controlled, press the material together in connection with a specially hardened press cylinder and guarantee excellent briquette quality. The compressing process is carried out without binders. The maximum humidity of the material must not exceed 15 %. The machine produces a quantity of briquettes between 6 - 12 kg per hour, but this can vary due to the different materials used. The briquettes automatically come out of the machine at approximately the same length. High reliability, almost no adjustment by the user. Adjustable pressure of the pressing chamber with the advantage: high quality of the produced briquette adapted to the used material.
Modèle de salle d'expo
La TT400 est une scie à onglet à usage fixe, équipée d'un moteur à induction silencieux et sans entretien de 3400 W (4,5 ch), qui peut être utilisé pour l'aluminium et le bois.
A workpiece is clamped securely in a vice. Sparky offers you the solution with their sturdy vices, designed entirely in cast iron, which adds to their sturdiness. With the help of this vice, you can work on your workpieces in different ways. The vice can be adjusted by means of the rotating spindle, which is operated by a wrench. The clamping plates are equipped with a rubber protection, so that your material will not be damaged during clamping. The vice has V-shaped grooves to support vertical and horizontal fastening of round pieces.
Deze polijstmachine is geschikt voor zowel lakwerk als verschillende schuurwerkzaamheden. De machine draait op een krachtig vermogen van 2000W en heeft een constante, onbelaste snelheid van 800 tot 2750 omwentelingen per minuut. De elektronische regelaar van de snelheid (met voorselectie) maakt het mogelijk de juiste snelheid voor uw klus te selecteren. Met de aan-en uitknop bovenop de machine bedien je hem met gemak, de sterke u-handgreep zorgt voor een ferme grip en stelt je in staat de machine stabiel vast te houden op het te polijsten oppervlak. Dit draagt bij aan het gebruiksgemak. De tandwielkast werd vervaardigd in een magnesium legering, de koolstofborstels hebben een autostopfunctie. Een flexpad van 175 mm en schuurdisk van 175 mm.
Take the guesswork out of installing drawers and doors and easily create consistent spacing with the Setup and Spacer Shims. This set of seven plates (two 2mm for inset drawers, two 3mm, two 6mm and one 19mm) can be stacked with magnets to create different sized openings and disclosures, whether you're building something new. build, renovate or repair. Save time by not stressing about high-precision measurements; the plates make quick adjustments easy. Stackability and different lengths add versatility, making the Setup and Spacer Shims ideal for many projects, including window and door installations.
Vane d'arrêt à diamètre 100mm en aluminium à utiliser avec les systèmes d'aspiration Air Flux.
The Kreg drilling jig for hinges is a special drilling jig for the simple installation of concealed (kitchen) cabinet hinges. This drilling jig allows you to quickly drill holes repeatedly for pot hinges (also called euro hinges). The drilling jig has accurate positioning of the hinge by means of index labels.
A drill bit with a carbide tip and a diameter of 35 mm is supplied with the jig as a standard.
SHOWROOM MODEL, old colours 2022
The Air Flux3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
UITVERKOOP
Deze trimmer is een tijdbesparende oplossing om zowel de boven- als de onderkant van rechte en ronde kanten af te frezen, zonder dat u uw paneel moet omdraaien. Deze machine is geschikt voor panelen met een dikte van 10 tot 44 mm en voor het profileren van randen in pvc, hout of andere materialen.
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVE660 or SVE670 model. No direct connection to the electric vacuum system SVE600 as model SVE660 or SVE670.
Porte outils en métal léger avec couteaux en carbure de haute qualité (HW) pour les joints collés. Grâce aux lames en carbure de tungstène, cette porte outils pour bouvetage coupe sans effort dans les planches ou les bois massifs. Il suffit de fraiser un côté de la pièce. Ensuite, on retourne le bois et on le fraise à nouveau. Les deux parties s'emboîtent parfaitement et grâce à la surface de contact plus grande, vous obtenez une liaison adhésive plus forte. A utiliser sur du bois d'une épaisseur comprise entre 20 mm et 48 mm.
Disponible avec un alésage de 30 mm ou 50 mm. Cette fraise a été spécialement développée pour la section longitudinale du bois. Pour les sections transversales, il est recommandé de travailler avec l'art. ST-YH156AAM.
Bestand tegen herhaald zagen in een industriële omgeving. De productiestop wordt bovenaan de geleiderail gemonteerd en heeft een dubbele cursor met lens zodat u hem zonder problemen aan weerzijden van het blad kunt gebruiken.
De Production Stop is ontworpen om te werken met Kreg® Top Trak en Heavy-Duty Trak, dus u kunt uw eigen geleiding bouwen, de rail installeren en de aanslag gebruiken. Dat geeft u opties, en betekent dat u de Production Stop gemakkelijk kunt gebruiken op vele soorten gereedschap. De aanslag valt eenvoudig vanaf de bovenzijde in de rail, waardoor hij snel kan worden verwijderd en verplaatst.
Créez votre propre système de serrage pour maintenir les pièces en place sur votre établi. Le kit universel Clamp Trak™ est compatible avec les serre-joints d'établi Kreg® (vendus séparément), ce qui vous permet de fixer les pièces tout en réalisant des Kreg Joints™, en ponçant, en défonçant, en perçant, etc. Les longs Clamp Traks™ vous permettent de fixer une, deux ou plusieurs pinces d'établi exactement là où vous en avez besoin.
Tubulure 100mm à utiliser avec les systèmes d'aspiration Air Flux. Filetage sur un côté.
Corrigeer de bladdrift tijdens het zagen.
Met het Kreg KMA4100 afkortstation kunt u platen tot 305 mm (12") breed snel en nauwkeurig afkorten. U kunt dit zaagstation ook gebruiken om verstekzaagsneden te maken van 0° tot 45°. Met het Kreg zaagstation kunt u met uw cirkelzaag net zo nauwkeurig zagen als met een verstekzaag.
Het zaagstation bevat twee verstelbare steunrails voor uw cirkelzaag. De rails kunnen precies op uw machine worden afgesteld, zodat u onder de juiste hoek en recht zaagt. U kunt het station precies afstellen op uw machine en weet precies waar het zaagblad zal zagen door een zaaglijn in de achterwand te tekenen.
Modèle de salle d'expoAVEC DES ACCESSOIRES GRATUITS:+ ARBRE POUR FRAISES DÉFONCEUSES 8, 10 ET 12 MM+ ARBRE DE FRAISAGE SUPPLÉMENTAIRE 20 MM+ BASE MOBILE+ GUIDE D'ONGLET
La série Itamac Eagle est constituée de toupies de haute qualité, spécialement conçues pour les applications professionnelles de fraisage. Conçue dans un souci de fonctionnalité et de confort, cette machine possède toutes les caractéristiques possibles pour une fraiseuse de cette catégorie. Équipé d'un châssis très résistant, d'un solide capot de protection en fonte avec des guides en aluminium et un réglage fin. Le puissant moteur de 230V fournit 3PK et assure que cette table peut gérer presque toutes les tâches de broyage. L'Itamac Eagle HW300E a un arbre de 30 mm. Grâce à l'arbre de fraisage et aux pinces de serrage disponibles en option, la machine peut également être utilisée pour le profilage à l'aide de fraises. La grande table en fonte garantit la stabilité nécessaire pendant le travail. Peut être utilisé à quatre vitesses, avec un panneau de contrôle centralisé au-dessus de la machine.
De Kreg Micro-Pocket Boorgeleider is compatibel met de Pocket-Hole Jig 520 PRO. Deze boorgeleider werkt goed met materialen met een minimale dikte van 13 mm (1/2") en een maximale dikte van 25 mm, waardoor het ideaal is voor kleine klusjes en krappe reparaties (1").
Het gebruik van het Micro Pocket accessoire is eenvoudig. De originele boormal wordt verwijderd uit de Kreg Pocket-Hole Jig 520 pro en vervangen door de Micro-Pocket Drilling Jig.
Net als onze accessoires voor de 500- en 700-Series Pocket-Hole Jig Micro-Pocket Drill Guide, creëert de KPHJ230 Pocket-Hole Jig Micro een 33% kleiner pocket hole dat ideaal is voor kleinere projecten, dunner materiaal en strakkere reparaties, maar dan als een volledig op zichzelf staand systeem. De Pocket-Hole Jig Micro heeft dezelfde gebruiksvriendelijkheid en veelzijdigheid als onze andere draagbare Pocket-Hole Jigs. Met een ontwerp om meerdere dikte-instellingen te regelen, een gemakkelijk instelbare boor en geharde stalen boorgeleiders, is dit de perfecte oplossing voor sterke pocket-hole verbindingen in ladedozen, verstekhoeken en meer.
Micro-Pocket holes zijn geweldig voor vrijwel elke toepassing waarbij je normale pocket holes zou gebruiken, vooral voor materiaal van 12 mm dik en smalle planken vanaf 25 mm breed. Omdat er minder materiaal wordt verwijderd, zijn de boorhandelingen sneller en gemakkelijker.
Direct uit de doos helpt deze Pocket-Hole Jig je snel werk te maken van kleine projecten. Compatibel met Kreg pan-head pocket-hole schroeven.
Strong clamp for quick clamping with one hand. Reversible, clamping force 300Kg.
Available in different lengths.
NIEUW - UITVERKOOP
Met deze zwaluwstaartmal freest u makkelijk de mooiste houtverbindingen tot 600 mm breedte. Standaard geleverd met stelplaat halverzonken 12,7 mm en frees met volg lager.
SHOWROOM MODEL - NEW
The CPL 270 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two planing knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 270 is the perfect partner for every carpenter on a construction site.
L'équerre ajustable Kreg Multi-Mark, également appelée carrée, possède un bloc en plastique. Ce bloc contient un niveau à bulle et la règle peut être glissée sur le bloc, qui est muni d'une mesure des deux côtés : un côté en millimètres, l'autre côté en pouces. Le côté métrique a une graduation d'un côté qui commence à 0 et va jusqu'à 152 mm, l'autre côté commence à 152 mm et continue jusqu'à 304 mm.
Le Multi-Mark est un outil de mesure qui peut être utilisé de différentes manières ; comme niveau à bulle, crochet bloc réglable, butée de profondeur, mais aussi, par exemple, pour régler la hauteur des lames de scie ou des fraises.
Avec l'équerre, vous pouvez mesurer et marquer des angles de 90º, mais aussi le placer obliquement comme un double carré. Pratique pour transférer un angle lors de la mesure et du marquage.
Connector en caoutchouc + colliers à diamètre 100mm à utiliser en combinaison avec les systèmes d'aspiration d'Air Flux.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
MODÈLE DE SALLE D'EXPOSITION - NON UTILISÉ
La TT255UTC offre toutes les possibilités d’une scie à onglet et, grâce à sa table supérieure avec guide, elle est également très adaptée à la coupe longitudinale de planches. Sa compacité et son faible poids la rendent particulièrement pratique à emporter lors de vos déplacements.
LAST MODEL!
This support with balls features 13 balls and measures 45 cm x 28 cm.
The height is adjustable from 64 cm to 108 cm.
Le système simple et réglable pour l'installation d'armoires par une seule personne. La section de 7,9 m du rail de montage simplifie le positionnement et l'installation des armoires murales en les maintenant temporairement en place. Avec ce système, vous pouvez utiliser des supports pour positionner jusqu'à 7,9 m d'unités murales jusqu'à ce que vous puissiez les fixer de manière permanente aux montants muraux. Il faut d'abord assembler les rails muraux en acier pour que l'installation soit plane. Ensuite, fixez des supports de suspension temporaires à vos armoires. Accrochez ensuite les armoires contre le mur. Ajustez et alignez les armoires jusqu'à ce que vous trouviez la position exacte dans laquelle vous souhaitez les fixer de manière permanente, puis vous pourrez facilement les attacher aux montants du mur.
SHOWROOM MODEL - NEW
The CPL 200 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 200 is the perfect partner for every carpenter on a construction site.
Set de couteaux profilés hauteur 40mm Nr. 0061 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
A nailing and stapling machine that can be adjusted by means of electronic control. Thanks to the ergonomic, well-balanced housing, this powerful tool is a handy helper during your jobs. Both staples (6 -14mm) and nails (max 16cm) can be placed with this device. There is a double safety switch on the device. The charger has a capacity of 83.
Lame de scie à ruban d’une longueur de 4670mm à utiliser sur la scie à ruban TT50BS ou TT61BS de Tendotools. Ce ruban de scie a 14 TPI (dents par inch) et a une largeur de 27mm. Ce lame de scie à ruban bimétallique est très solide et, outre le bois ou le plastique, il convient même au sciage des alliages de métaux légers ou, par exemple, de l'aluminium. Il est également recommandé d'utiliser ces lames de scie pour une utilisation à long terme sur les bois durs.
SHOWROOM MODEL
Staande houtkliefmachine voor tweehandige bediening. Deze krachtige houtkliever is perfect geschikt voor semiprofessioneel of thuisgebruik. Met behulp van deze kliefmachine klieft u probleemloos houtstukken tot 1000mm lengte (mits verlengstuk 3GRLAKR) en diameter 450mm. De tafel kan ingesteld worden op drie hoogtes 520mm - 900mm of 1300mm. Qua prestaties is dit model identiek aan de TT1350/12T met als verschil dat dit model is voorzien van een benzinemotor van 6.5 PK(Briggs & Stratton). Tot 11 ton drukkracht. Dankzij het compacte design is deze klover gemakkelijk op te bergen of te verplaatsen. Eenvoudig verrijdbaar dankzij de rubberen banden.
SHOWROOM MODEL 2022
Inclined aluminum rip fence
Fast quick clamping
Double clamping at the front and back of the table
Smooth running guide on nylon pressure points
Quick detachable
Metal and adjustable size indication
Aluminum guide with T-slot
These portable and compact planers and saws 230V are unique on the market. 270mm planing width and 117mm adjustable cutting height in one machine. Equipped with an induction motor 3,5 HP.
The machine is suitable for working with groove cutters. FREE safety pressure system and routing table worth € 150.00.
Mobile base optional
This concrete grinder was specially designed for grinding away concrete parts, sanding down old concrete layers or removing transitions between formwork and concrete runners. Optimal preparation for further coatings. The concrete sander has a metal housing and dust extraction. This extraction prevents dust nuisance, which in turn reduces disc wear and keeps the concrete pores open. Equipped with a diamond head grain 24 and a reliable 2100W motor. A blocking system has also been fitted so that the diamond heads can be changed safely. Vibration-damping, ergonomic handle (rotates 90°) for optimal handling and control of the device. An airflow cooling system reduces noise pollution to an absolute minimum. Max speed 6,600.
Content
Set de couteaux profilés hauteur 40mm Nr. 0042 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
This professional set contains six parts and consists of high-quality TCT diamond hole saws. The set is hard-wearing and has sturdy teeth that ensure durability and longer life. The chip area has been improved, allowing quick chip removal. This hole saw set is suitable for cutting plasterboard, aerated concrete, wood, laminate and PVC. The set includes a centring drill and five different bell drills with diameters of 35, 40, 54, 60 and 65 millimetres.
Whether you are starting from scratch, renovating or repairing, the Drawer Front Mounting Tool is the simple and effective way to assemble and align drawer fronts. It removes the need to use one hand to hold pieces in place while you work. The thick steel design features large clamp pads, a GripMaxx non-slip surface and ribbed corners to minimize flexibility and maintain project stability.
The Drawer Front Mounting Tool reduces the clumsy hassle and repositioning required and simplifies the process to three simple steps: clamp, align, attach.
Includes left and right Carrier front mounting tools.
Combine it with the Setup and Spacer Shims (sold separately) for accurate and consistent openings and sight lines.
Economy -systeem REKORD : 14-piece set of Frame Cutters
Unique for the production of frames, windows and doors according to the Dutch standard profiles.
rekord cutterhead nr 128 1,00
rekord cutterhead nr 999 1,00
rekord cutterhead nr 918 1,00
rekord cutterhead nr 921 1,00
rekord cutterhead nr 922 1,00
rekord cutterhead nr 938 1,00
rekord cutterhead nr 916a 2,00
adjusting ring d40x21.5 1,00
adjusting ring d40x17.0 1,00
adjusting ring d40x14.0 1,00
adjusting ring d40x9.5 2,00
adjusting ring d40x9.0 1,00
Tuyau anti-statique longueur 6 mètre diamètre 100 mm. A utiliser en combinaison avec les extracteurs de poussière Air Flux.
This rotary hammer is designed for real, heavy-duty work. Chiselling and drilling into concrete are no problem for this strong machine. This drill is equipped with an electro-pneumatic function, which moves the drill forward in the material. This hammer function is stronger than in an ordinary drill. Equipped with an SDS quick-action chuck. Furthermore, the machine was equipped with an ergonomic handle with soft grip (both housing and handle are vibration-damping), magnesium gearbox, safety clutch and trigger speed control. The housing consists of one part (monoblock). The number of strokes per minute is 2800. Drilling into concrete up to 40 mm. Torque of 130 Nm. Overloading of the unit is indicated by means of an LED.
The TT915 sander can be used, among other things, for deburring and sanding surfaces and accurate finishing of contours. This compact tabletop model is easy to move, yet very stable thanks to its cast-iron base. The sanding belt can be used either vertically or horizontally or at a specific angle. The large aluminum table can be used inclined for both the sanding belt and disc up to 45°. The work table is supported on both sides for precision use. Equipped with a D handle for easy transport. Quick-release sanding belt system for quick change, convenient control knob for balancing the belt. Dust extraction outlet 60 mm. This is the universal solution for modelers and hobbyists, for all shapes and materials.
This sander comes standard with an 80-grit sanding belt and disc. For the belt, grit 40, 60, 100, 120 and 150 are also available. For the disc, grit 60, 100, 120, 150 and 220 are also available.
Porte outil à moulurer avec des plaquettes réversibles et araseurs en carbure de haute qualité (HW). Les plaquettes sont alternativement à un angle différent pour un meilleur résultat de coupe. Grâce aux araseurs en haut et en bas, votre travail de fraisage est toujours propre. Parfait pour fraiser des rabais. Grâce aux lames en carbure de tungstène, cette fraise à rainurer coupe sans effort les planches massives, les bois durs et tendres, le MDF ou les planches laminées.
Disponible avec un alésage de 30 mm ou 50 mm.
The TT400 is a heavy-duty cut-and-miter saw for stationary use, the largest of its kind.
The TT400 is equipped with a silent, maintenance-free 3400 W (4.5 HP) induction motor. It can be used for both aluminum and wood.
The use of ball bearings on all joints ensures precise rotation of the table, head and tilting system. The saw has a die-cast aluminum body and a heavy cast iron base (80 kg). The silent, maintenance-free 3400 W (4.5 HP) belt-driven induction motor is positioned at the rear of the head, giving the saw a large capacity and high torque. The saw blade has a 400 mm diameter and 80 teeth.
The TT400 is further equipped with a reversible handle with controls on the protective cover.
This durable rod fits standard mitre grooves of 19 x 9 mm. With eight nylon screws along the entire length of the rod to avoid any play in the groove. Mounting holes are provided every 127 mm. Ideal for fixing moulds and clamps.
Mitre gauge with a precise fit.
If you are making jigs and fixtures for your table saw, router table, band saw or other tool with a mitre slot, you need a rod that fits precisely (in a standard 9 mm x 19 mm mitre slot) and glides smoothly. This one does both
Proven performance
This is the same adjustable bar that comes standard on our precision miter guide, giving you the same proven accuracy on any jigs you make.
Built-in adjustability
Six nylon screws along the entire length of the rod can be adjusted with a simple turn of a screwdriver to take up the slack in the mitre groove. This way, you get an exact fit that lasts for years.
Great versatility
This 762 mm long rod has fixing holes every 102 mm along its length, so that you can fix your templates in different ways.
Lichte en krachtige mini vlakschuurmachine voor het polijsten en afwerken van uw werkstukken. Deze machine onderscheidt zich van het model LR84H door zijn dubbele beweging. De schuurzool beweegt zowel roterend als excentrisch. Het ergonomische ontwerp zorgt voor een perfecte houvast en comfortabel werken. Al de bedieningselementen zijn eenvoudig bereikbaar tijdens het werken. Standaardlevering met Delta opzetstuk om moeilijk te bereikbare plaatsen zoals hoeken of jaloezieën toch te kunnen schuren. Het Delta stuk is zowel boven- als onderaan voorzien van klittenband / velcro om schuurpapier te bevestigen. Nog standaard geleverd met een ronde schuurplaat (Ø125mm). Voorzien van een geïntegreerde stofafzuiging en stofzak. Met elektronische snelheidsregeling en remsysteem voor de schuurzool.
Optioneel verkrijgbaar in een handige PVC koffer.
The Accu-CutTM guide rail is a circular saw accessory that ensures perfectly straight and splinter-free cuts. The Accu-Cut guides the circular saw along an aluminium rail, which keeps the saw straight and allows easy adjustment by aligning the rail with the cutting line. Anti-slip guide strips secure the guide and prevent splinters.
Straight, precise and splinter-free cuts
- Longitudinal, trimming and diagonal cuts in plywood, MDF and boards up to 120 cm long.
- To saw accurately, simply align the guide rail with the markings.
- Anti-slip guide strips keep the rail in place and prevent it from jamming.
- Anti-splinter strips prevent the material from splintering during sawing.
- Start cutting quickly with a starting block that supports the saw and allows the blade guard to operate normally.
- Use the universal carriage to mount practically any circular saw, on the left or right.
- The Kreg Rip-CutTM is compatible with the universal carriage.
- Instead of having to bring your material to the saw, you bring the saw to the material.
Turn your circular saw into a track-controlled saw.
Make straight, precise and splinter-free cuts with the circular saw and the Accu-CutTM circular saw guide system to get started right away. It rips, cuts and angles plywood, MDF and other large boards up to 120 cm in length with super-easy installation, extreme precision and incredible control.
The Accu-Cut moves the circular saw in a straight line by guiding it along an aluminium rail.
The Accu-Cut™ design makes it easy to set up by aligning the rail with the cutting line.
Thanks to the double guide strips, no clamps are needed to hold the rail in place. They have a non-slip coating to prevent slipping and an anti-shattering factor to prevent shattering cuts. In addition, the rail makes it easy to make straight cuts on sheets that do not have a straight, flat edge.
Circular saws do not have effective guides that ensure they move straight along a cutting line. Moreover, it can be difficult to see the cutting path of the blade. Together, these things make it a challenge to keep a saw at the cut you want. Circular saws also often cause facings to shatter.
The Accu-Cut™ solves these problems. The Accu-Cut™ is also portable, so you can bring the saw to the workpiece and cut with precision, instead of having to handle heavy boards on a table saw.
The Accu-Cut™ is easy and intuitive for beginners, but robust enough for professionals. Because it is not necessary to hold the saw straight and guide it manually along a cutting line, the Accu-Cut™ is ideal for less experienced users. Accu-Cut™ also makes professionals faster and more productive because it makes a variety of cuts quickly and easily.
Rechte slijpmachines zijn ideaal voor slijpklussen op moeilijk bereikbare plekken. De rechte slijper van Sparky is licht en compact, wat het makkelijk hanteerbaar maakt. De rechte slijper wordt aangesloten op netstroom. Dit model leent zich uitstekend om te frezen, polijsten en graveren. Onmisbaar voor nauwkeurige werkzaamheden.
Plaqueuse de chants PEB200+ ou PEB250+ monté dans une table extensible pour le traitement stationnaire de pièces plus grandes. Cette plaqueuse de chants à boîte à colle fait sans problème les chants en PVC, ABS, mélamine ou bois sur des panneaux droits, ronds ou de forme. La machine est adaptée au traitement d'une bande de chant d'une épaisseur comprise entre 0,4-3 mm et 10-62 mm de hauteur. Les rouleaux automatiques et l'alimentation avec système de guidage garantissent que la bande de chant se pose toujours correctement sur votre panneau. La hauteur et l'épaisseur de la bande de chant sont très faciles à régler à l'aide de la commande millimétrique. Enfin, la machine dispose également d'un dosage réglable de la colle afin que vous utilisiez toujours la bonne quantité pour votre pièce.
Choix de la table avec le modèle PEB200+ ou PEB250+. Les deux conviennent au collage des mêmes côtés avec une différence importante. Le modèle PEB250+ dispose d'un contrôle de la vitesse et de la température. Ce modèle est donc mieux adapté à une utilisation sur des panneaux ronds ou façonnés. La table est équipée d'un support pour les rouleaux et d'un coupe en arrière manuel. L'adhésif du bord peut facilement être retiré de la table pour le travail mobile. Dans ce cas, vous devez utiliser des bandes à bords prédécoupés.
Boîte à colle brevetée
Plaqueuse de chants PEB200TRC ou PEB250TRC est, comme tous les autres modèles Virutex, équipé d'un bac à colle breveté recouvert de Téflon®. Ce revêtement offre des avantages très importants par rapport aux machines comparables. Après utilisation, il est très facile de nettoyer à nouveau le bac à colle, ce qui rend cette plaqueuse beaucoup plus facile à entretenir. Cela signifie également que vous pouvez utiliser d'autres adhésifs rapidement et sans problème. Aucun ajustement supplémentaire n'est nécessaire pour changer la couleur de la colle entre deux projets. Les rouleaux adhésifs ont été polymérisés pour éviter d'endommager vos bandes de chant.
Cette fraise à chanfrein réglable avec des plaquettes en carbure de tungstène de haute qualité vous offre une grande flexibilité pour réaliser des chanfreins. La fraise est réglable des deux côtés entre 0° et 70° par incréments de 1°. Utilisez la fraise à la fois pour chanfreiner le bois et les planches. Grâce aux lames en carbure de tungstène, cette fraise à rainurer coupe sans effort les planches massives, les bois durs et tendres, le MDF ou les planches laminées.
La hauteur maximale de fraisage à 0° est de 48 mm, à 70° elle est de 15 mm.
With this edge router, you have affordable automation. Large adjustable carrier plate covered with Teflon carriers. You mill the side, corner and top in one movement from right to left.
Lame de scie à ruban d’une longueur de 3345mm à utiliser sur la scie à ruban TT400 de Tendotools. Ce ruban de scie a 3 TPI (dents par inch) et a une largeur de 20mm. Cette lame en acier trempé "Flexback" est très adapté au sciage polyvalent. Utilisez cette lame de scie pour le bois et le plastique. Les dents de la lame de scie ont reçu un traitement thermique supplémentaire pour augmenter leur dureté. Cela permet de garder la ruban très souple et d'augmenter votre confort de coupe grâce à la dureté des dents.
Avec cet ensemble de trois protecteurs, vous pouvez faire de votre serre-joint Piher PRL400 comme neuve.
Les protecteurs peuvent simplement cliquer sur la serre-joint lorsque les protecteurs d'origine sont trop endommagées.
De Air Flux® cyclones distinguish themselves from other classic cyclone dust extractors due to their unique negative pressure system. The waste bags do not need to be suspended in a basket because they are kept in place thanks to the airflow. It is also possible to control the Air Flux Cyclone dust extractors remotely wtih help from a PCB module (sold seperately). The Air Flux cyclone Dust Extractors can also be ordered in a mobile version, thanks to the sturdy wheeled base they can be easily moved throughout your entire workshop. The silent induction engine makes sure not only your lungs are better protected but your ears as well.
This dust extractor is equipped with a 2HP induction engine capable of delivering a steady airflow of 2270m³/h. Thanks to the cyclone collector unit, the wood particles and dust (99.9%) are separated from the air flow before they enter the filter cartridge. As the wood particles do not pass through the fan unit, optimum airflow and dust collection are constantly guaranteed. The dust (99.9%) is collected in a metal waste bin with a viewing window. This drum was fitted with a one-hand clamp and separate wheels for quick and easy emptying. The remaining dust passes through a Canister filter cartridge with automatic filter cleaning. Thanks to this cartridge, the dust is filtered between 0.2µm and 2µm towards a PVC residual bag.
Met het afkorthulpstuk Kreg Portable Crosscut kunt u snel en accuraat planken tot 203 mm breed afkorten met uw cirkelzaag. Met dit hulpstuk zaagt u nauwkeurig hoeken van 90° én 45°.
De Kreg Portable Crosscut bevat een steunrand voor uw cirkelzaag. Hierdoor blijft de zaag stabiel, van het begin tot het einde van de zaagsnede. Dit maakt het nauwkeurig afkorten een stuk gemakkelijker en hoeft u niet meer te twijfelen of u wel recht zaagt.
Het afkorthulpstuk beschikt over een verstelbare geleidearm, de retractable cutline indicator, waarmee u precies kunt instellen waar uw zaagblad komt. U stelt het hulpstuk precies in voor uw machine. Hierdoor is het ideaal voor herhaalwerkzaamheden, omdat u het hulpstuk niet elke keer opnieuw hoeft in te stellen.
Door aan de knop te trekken gaat de geleidearm snel weer uit de weg en bent u klaar om te zagen.
Dankzij het speciale antislipmateriaal heeft de Kreg Portable Crosscut een ferme grip op het hout en blijft het hulpstuk uitstekend op zijn plaats, zodat u altijd een nauwkeurig resultaat bereikt.
Het hulpstuk is eenvoudig mee te nemen en bijgevolg ook ideaal voor snelle klussen.
De Kreg Portable Crosscut is gemaakt van schokbestendig materiaal. Hierdoor gaat het hulpstuk lang mee, ook bij intensief gebruik.
Universele wielkit om te gebruiken onder uw houtbewerkingsmachine. Maximum draagkracht 600kg op een maximum grootte van 750x860mm.
Een onmisbare tool voor elke klusser. Een multitool waar je alles mee kan. Deze haakse slijper (vermogen 2300W) is uitermate geschikt voor het zwaardere slijpwerk. Hij wordt aangedreven middels netstroom. De slijper kan gebruikt worden voor het doorslijpen van metaal, hout en steen kun je de haakse slijper ook gebruiken voor het wegslijpen van roest en afbramen van metaal.
Rabot-dégau puissante et robuste avec moteur à induction, adaptée à chaque atelier. Cette machine est disponible avec un moteur 230V ou 400V triphasé. La conception robuste en acier avec des surfaces de travail en fonte rend cette machine résistante à un usage quotidien intensif. Les tables de dégauchissage sont équipées d'un profil lourd en bas pour maintenir la planéité à tout moment. Les tables sont articulées indépendamment et peuvent être relevées. De cette façon, vous pouvez utiliser au maximum les capacités de la raboteuse.
Cette raboteuse est facilement réglable au moyen d'une roue tournant en douceur et sans à-coups. Il est équipé d'une échelle millimétrique pour vous permettre de lire facilement la bonne hauteur. Pendant le travail, l'unité de rabotage reste en position sans problème grâce au dispositif de verrouillage. Combiné à la vitesse d'avance de 6m/min, cela garantit une finition très lisse et régulière de toutes vos pièces.
Afin de pouvoir dégauchir très précisément, cette machine est équipée d'un solide guide en aluminium sur le dessus. Ce guide peut être réglé à un angle avec deux butées pour 90° et 45°. Grâce à l'arbre de rabotage lourd, équipé de trois fers de rabotage, une bonne finition est toujours garantie. Les copeaux sont évacués par une capot à charnière. Cette capot peut être raccordée à un système d'extraction des poussières grâce à la sortie Ø100mm. Cette machine est livrée en standard avec des fers de rabotage d'une épaisseur de 1,5 mm. Des fers de rabotage plus épaisses (3 mm) sont disponibles sur demande.
To make briquettes from sawn wood, sawdust, filter dust, and other similar materials. The material to be processed is put into the 52-litre container. The feeder continuously fills the channel of the pressing unit. The transit brings the material to the pre-compressor. A hydraulic cylinder pushes the material into the press chamber. The press pieces, which are also hydraulically controlled, press the material together in connection with a specially hardened press cylinder and guarantee excellent briquette quality. The compressing process is carried out without binders. The maximum humidity of the material must not exceed 15 %. The machine produces a quantity of briquettes between 6 - 12 kg per hour, but this can vary due to the different materials used. The briquettes automatically come out of the machine at approximately the same length. High reliability, almost no adjustment by the user. Filling cylinder with silent operation and long service life. Stable hopper with screw loader and feeder. The cylinders are controlled by sensors. Advantage: low wear, reduces maintenance costs. Separate motor for the propeller and feeder.
Adjustable pressure of the pressing chamber with the advantage: high quality of the produced briquette adapted to the used material.
La TT400 est une scie à coupe et à onglets à usage stationnaire, la plus grande de son genre.
La TT400 est équipée d'un moteur à induction silencieux et sans entretien de 3400 W (4,5 cv). Elle peut être utilisée aussi bien pour l'aluminium que pour le bois.
L'utilisation de roulements à billes sur toutes les articulations assure une rotation précise de la table, de la tête et du système de basculement. La scie a un corps en aluminium moulé sous pression et une lourde base en fonte (80 kg). Le moteur à induction silencieux et sans entretien de 3400 W (4,5 ch) avec entraînement par courroie est placé à l'arrière de la tête, ce qui confère à la scie une capacité et un couple élevés. La lame de scie a un diamètre de 400 mm et 80 dents.
La TT400 est en outre équipée d'une poignée réversible avec des commandes sur le capot de protection.
Anyone who wants to clamp his workpiece should use high-quality clamps. Sparky offers you the solution, designed entirely in cast iron, which makes it more solid. With the help of this vice, you can work on your workpieces in different ways. The vice can be adjusted by means of the rotating spindle, which is operated by a wrench. The clamping plates are equipped with a rubber protection, so that your material will not be damaged during clamping. The vice has V-shaped grooves to support vertical and horizontal fastening of round pieces.
Deze polijstmachine is geschikt voor zowel lakwerk als verschillende schuurwerkzaamheden. De machine draait op een krachtig vermogen van 2000W en heeft een constante, onbelaste snelheid van 800 tot 2750 omwentelingen per minuut. De elektronische regelaar van de snelheid (met voorselectie) maakt het mogelijk de juiste snelheid voor uw klus te selecteren. Met de aan-en uitknop bovenop de machine bedien je hem met gemak, de sterke u-handgreep zorgt voor een ferme grip en stelt je in staat de machine stabiel vast te houden op het te polijsten oppervlak. Dit draagt bij aan het gebruiksgemak. De tandwielkast werd vervaardigd in een magnesium legering, de koolstofborstels hebben een autostopfunctie. Een flexpad van 175 mm en schuurdisk van 175 mm.
Take the guesswork out of installing drawers and doors and easily create consistent spacing with the Setup and Spacer Shims. This set of seven plates (two 2mm for inset drawers, two 3mm, two 6mm and one 19mm) can be stacked with magnets to create different sized openings and disclosures, whether you're building something new. build, renovate or repair. Save time by not stressing about high-precision measurements; the plates make quick adjustments easy. Stackability and different lengths add versatility, making the Setup and Spacer Shims ideal for many projects, including window and door installations.
Vane d'arrêt à diamètre 100mm en aluminium à utiliser avec les systèmes d'aspiration Air Flux.
The Kreg drilling jig for hinges is a special drilling jig for the simple installation of concealed (kitchen) cabinet hinges. The placement of these hinges requires precision, otherwise you will be looking at crooked (kitchen) cabinets for years.
This drilling jig allows you to quickly drill holes repeatedly for pot hinges (also called euro hinges). The drilling jig has accurate positioning of the hinge by means of index labels.
The pot drill runs in a shaft and the hole is therefore always straight and the depth stop ensures that the desired depth is always drilled. 2 adjustable cams ensure the correct offset of the hinge.
A drill bit with a diameter of 35 mm is supplied with the jig as a standard.
The Air Flux 3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Deze trimmer is een tijdbesparende oplossing om zowel de boven- als de onderkant van rechte en ronde kanten af te frezen, zonder dat u uw paneel moet omdraaien.
Deze machine is geschikt voor panelen met een dikte van 10 tot 44 mm en voor het profileren van randen in pvc, hout of andere materialen.
Ze heeft een krachtige motor van 740 W die voorzien is van een elektronische snelheidsregeling. Met behulp van de automatisch rem op de kogellager, vermijdt u dat randen of panelen beschadigd worden. De trimplaat maakt het mogelijk om alle randen van een paneel in één continue passage te frezen of te trimmen.
De snijkop heeft een groot steunvlak voor perfecte stabiliteit op vlakke oppervlakken. De extra knop zorgt voor een betere houvast en verhoogd comfort tijdens het werken. Ook voor het frezen van hoeken is deze snijkop een onmisbaar accessoire. Met behulp van de meegeleverde pen creëert u eenvoudig een steun om de machine horizontaal te plaatsen. Dankzij deze hefboom kunt u zonder problemen verticaal frezen om ook uw hoeken mooi af te werken.
Uniek aan deze trimmer is dat u zowel de boven- als onderkant kunt frezen zonder dat u uw paneel hoeft om te draaien. U selecteert het snijgereedschap aan de boven- of onderkant door de positiehendel te verzetten.
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVE660 or SVE670 model. No direct connection to the electric vacuum system SVE600 as model SVE660 or SVE670.
Porte outils en métal léger avec couteaux en carbure de haute qualité (HW) pour les joints collés. Grâce aux lames en carbure de tungstène, cette porte outils pour bouvetage coupe sans effort dans les planches ou les bois massifs. Il suffit de fraiser un côté de la pièce. Ensuite, on retourne le bois et on le fraise à nouveau. Les deux parties s'emboîtent parfaitement et grâce à la surface de contact plus grande, vous obtenez une liaison adhésive plus forte. A utiliser sur du bois d'une épaisseur comprise entre 20 mm et 48 mm.
Disponible avec un alésage de 30 mm ou 50 mm. Cette fraise a été spécialement développée pour la section longitudinale du bois. Pour les sections transversales, il est recommandé de travailler avec l'art. ST-YH156AAM.
Bestand tegen herhaald zagen in een industriële omgeving. De productiestop wordt bovenaan de geleiderail gemonteerd en heeft een dubbele cursor met lens zodat u hem zonder problemen aan weerzijden van het blad kunt gebruiken.
De Production Stop is ontworpen om te werken met Kreg® Top Trak en Heavy-Duty Trak, dus u kunt uw eigen geleiding bouwen, de rail installeren en de aanslag gebruiken. Dat geeft u opties, en betekent dat u de Production Stop gemakkelijk kunt gebruiken op vele soorten gereedschap. De aanslag valt eenvoudig vanaf de bovenzijde in de rail, waardoor hij snel kan worden verwijderd en verplaatst.
Créez votre propre système de serrage pour maintenir les pièces en place sur votre établi. Le kit universel Clamp Trak™ est compatible avec les serre-joints d'établi Kreg® (vendus séparément), ce qui permet de .
vous pouvez fixer les pièces tout en réalisant des Kreg Joints™, en ponçant, en défonçant, en perçant, etc. Les longs Clamp Traks™ vous permettent de fixer une, deux ou plusieurs pinces d'établi exactement là où vous en avez besoin.
Tubulure 100mm à utiliser avec les systèmes d'aspiration Air Flux. Filetage sur un côté.
Corrigeer de bladdrift tijdens het zagen.
Met het Kreg KMA4100 afkortstation kunt u platen tot 305 mm (12") breed snel en nauwkeurig afkorten. U kunt dit zaagstation ook gebruiken om verstekzaagsneden te maken van 0° tot 45°. Met het Kreg zaagstation kunt u met uw cirkelzaag net zo nauwkeurig zagen als met een verstekzaag.
Het zaagstation bevat twee verstelbare steunrails voor uw cirkelzaag. De rails kunnen precies op uw machine worden afgesteld, zodat u onder de juiste hoek en recht zaagt. U kunt het station precies afstellen op uw machine en weet precies waar het zaagblad zal zagen door een zaaglijn in de achterwand te tekenen.
Met het Kreg zaagstation kunt u niet alleen uw zaagmachine ondersteunen, maar ook uw werkstuk stabiliseren. Het station is uitgerust met twee verschuifbare fixeerklemmen. Deze klemmen houden uw werkstuk stevig op zijn plaats, zodat u een nauwkeurig resultaat kunt bereiken. Met behulp van de verstekaanslag kunt u met het Kreg zaagstation ook verstekzaagsneden van 0° tot 45° maken. Op het station zijn de hoeken al gemarkeerd. Daardoor kunt u de hoek van het station gemakkelijk aanpassen. De aanslag houdt uw werkstuk in de juiste hoek.
Het Kreg zaagstation heeft uitklapbare steunen waarmee u langere platen materiaal kunt ondersteunen. De beschermkappen aan de uiteinden van deze steunen kunnen ook worden verwijderd en op uw werkbank worden verplaatst om nog langere lengtes te ondersteunen. De steunen kunnen gemakkelijk in het station worden teruggeklapt. De antislipvoet van het afkortstation houdt het station stabiel. Voor een meer permanente bevestiging kan het station aan uw werkbank worden vastgeschroefd.
Het afkortstation is compact en eenvoudig in elkaar te zetten. Daardoor kunt u snel aan de slag en is het zaagstation snel opgeruimd. Het zaagstation is klein genoeg om te vervoeren en te gebruiken als mobiel zaagstation voor snelle klussen.
La série Itamac Eagle est constituée de toupies de haute qualité, spécialement conçues pour les applications professionnelles de fraisage. Conçue dans un souci de fonctionnalité et de confort, cette machine possède toutes les caractéristiques possibles pour une fraiseuse de cette catégorie. Équipé d'un châssis très résistant, d'un solide capot de protection en fonte avec des guides en aluminium et un réglage fin. Le puissant moteur de 230V ou 400V fournit 3HP et permet à cette table d'accomplir presque toutes les tâches de fraisage. L'Itamac Eagle HW300E a un arbre de 30 mm. Grâce à l'arbre de fraisage et aux pinces de serrage disponibles en option, la machine peut également être utilisée pour le profilage à l'aide de fraises. La grande table en fonte garantit la stabilité nécessaire pendant le travail. Peut être utilisé à quatre vitesses, avec un panneau de contrôle centralisé au-dessus de la machine.
De Kreg Micro-Pocket Boorgeleider is compatibel met de Pocket-Hole Jig 520 PRO. Deze boorgeleider werkt goed met materialen met een minimale dikte van 13 mm (1/2") en een maximale dikte van 25 mm, waardoor het ideaal is voor kleine klusjes en krappe reparaties (1").
Het gebruik van het Micro Pocket accessoire is eenvoudig. De originele boormal wordt verwijderd uit de Kreg Pocket-Hole Jig 520 pro en vervangen door de Micro-Pocket Drilling Jig.
De meegeleverde materiaaldiktemeter kan worden gebruikt om de dikte van het materiaal te bepalen. De maten op de materiaaldiktemeter komen overeen met de maten op de boorgeleider, zodat u deze snel op de juiste maat kunt instellen. Vervolgens schroeft u de boorstop vast op de juiste maat op de boor, en u bent klaar om de Kreg Micro-Pocket Boorgeleider te gebruiken.
Een boor met boorstop en een materiaaldiktemeter worden meegeleverd met de Kreg Micro-Pocket Drill Guide.
Kreg Pan Head schroeven zijn geschikt voor het maken van pocket holes in kleine werkstukken en smalle materialen. De kop van deze schroeven is smaller.
Net als onze accessoires voor de 500- en 700-Series Pocket-Hole Jig Micro-Pocket Drill Guide, creëert de KPHJ230 Pocket-Hole Jig Micro een 33% kleiner pocket hole dat ideaal is voor kleinere projecten, dunner materiaal en strakkere reparaties, maar dan als een volledig op zichzelf staand systeem. De Pocket-Hole Jig Micro heeft dezelfde gebruiksvriendelijkheid en veelzijdigheid als onze andere draagbare Pocket-Hole Jigs. Met een ontwerp om meerdere dikte-instellingen te regelen, een gemakkelijk instelbare boor en geharde stalen boorgeleiders, is dit de perfecte oplossing voor sterke pocket-hole verbindingen in ladedozen, verstekhoeken en meer.
Micro-Pocket holes zijn geweldig voor vrijwel elke toepassing waarbij je normale pocket holes zou gebruiken, vooral voor materiaal van 12 mm dik en smalle planken vanaf 25 mm breed. Omdat er minder materiaal wordt verwijderd, zijn de boorhandelingen sneller en gemakkelijker.
Direct uit de doos helpt deze Pocket-Hole Jig je snel werk te maken van kleine projecten. Compatibel met Kreg pan-head pocket-hole schroeven.
Super handy and powerful glue clamp that can be used with one hand. Nylon and fiberglass reinforced jaws that are reversible by a click system.
Patented Easy-Grip system: more power with less effort. This gives them a clamping force of up to 300 kg.
NIEUW - UITVERKOOP
Met deze zwaluwstaartmal freest u makkelijk de mooiste houtverbindingen tot 600 mm breedte. Standaard geleverd met stelplaat halverzonken 12,7 mm en frees met volg lager.
The CPL 270 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two planing knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 270 is the perfect partner for every carpenter on a construction site.
L'équerre ajustable Kreg Multi-Mark, également appelée carrée, possède un bloc en plastique. Ce bloc contient un niveau à bulle et la règle peut être glissée sur le bloc, qui est muni d'une mesure des deux côtés : un côté en millimètres, l'autre côté en pouces. Le côté métrique a une graduation d'un côté qui commence à 0 et va jusqu'à 152 mm, l'autre côté commence à 152 mm et continue jusqu'à 304 mm.
Le Multi-Mark est un outil de mesure qui peut être utilisé de différentes manières ; comme niveau à bulle, crochet bloc réglable, butée de profondeur, mais aussi, par exemple, pour régler la hauteur des lames de scie ou des fraises.
Avec l'équerre, vous pouvez mesurer et marquer des angles de 90º, mais aussi le placer obliquement comme un double carré. Pratique pour transférer un angle lors de la mesure et du marquage.
Connector en caoutchouc + colliers à diamètre 100mm à utiliser en combinaison avec les systèmes d'aspiration d'Air Flux.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
La TT255UTC offre toutes les possibilités d’une scie à onglet et, grâce à sa table supérieure avec guide, elle est également très adaptée à la coupe longitudinale de planches. Sa compacité et son faible poids la rendent particulièrement pratique à emporter lors de vos déplacements.
L'utilisation de roulements à billes sur toutes les articulations assure une rotation précise de la table, de la tête et du système de basculement. Cette scie compacte et légère a un boîtier en aluminium moulé sous pression, une lame de scie très compacte de 255 mm avec 48 dents, une large table supérieure facilement réglable avec un guide robuste et une indication d’onglet claire. Le moteur a un entraînement par courroie qui fournit un grand couple et est placé à l'arrière, ce qui donne à la scie une grande profondeur de coupe.
La TT255UTC est également équipée d'une poignée verticale ergonomique en D, qui garantit que le mouvement de montée et de descente est effectué à partir du poignet plutôt que de l'épaule. Un avantage supplémentaire de cette poignée est qu'elle peut être utilisée avec la main gauche ou la main droite.
LAST MODEL!
This support with balls features 13 balls and measures 45 cm x 28 cm.
The height is adjustable from 64 cm to 108 cm.
Le système simple et réglable pour l'installation d'armoires par une seule personne. La section de 7,9 m du rail de montage simplifie le positionnement et l'installation des armoires murales en les maintenant temporairement en place. Avec ce système, vous pouvez utiliser des supports pour positionner jusqu'à 7,9 m d'unités murales jusqu'à ce que vous puissiez les fixer de manière permanente aux montants muraux. Il faut d'abord assembler les rails muraux en acier pour que l'installation soit plane. Ensuite, fixez des supports de suspension temporaires à vos armoires. Accrochez ensuite les armoires contre le mur. Ajustez et alignez les armoires jusqu'à ce que vous trouviez la position exacte dans laquelle vous souhaitez les fixer de manière permanente, puis vous pourrez facilement les attacher aux montants du mur.
The CPL 200 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 200 is the perfect partner for every carpenter on a construction site.
Set de couteaux profilés hauteur 40mm Nr. 0061 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
A nailing and stapling machine that can be adjusted by means of electronic control. Thanks to the ergonomic, well-balanced housing, this powerful tool is a handy helper during your jobs. Both staples (6 -14mm) and nails (max 16cm) can be placed with this device. There is a double safety switch on the device. The charger has a capacity of 83.
Lame de scie à ruban d’une longueur de 4670mm à utiliser sur la scie à ruban TT50BS ou TT61BS de Tendotools. Ce ruban de scie a 14 TPI (dents par inch) et a une largeur de 27mm. Ce lame de scie à ruban bimétallique est très solide et, outre le bois ou le plastique, il convient même au sciage des alliages de métaux légers ou, par exemple, de l'aluminium. Il est également recommandé d'utiliser ces lames de scie pour une utilisation à long terme sur les bois durs.
Staande houtkliefmachine voor tweehandige bediening. Deze krachtige houtkliever is perfect geschikt voor semiprofessioneel of thuisgebruik. Met behulp van deze kliefmachine klieft u probleemloos houtstukken tot 1000mm lengte (mits verlengstuk 3GRLAKR) en diameter 450mm. De tafel kan ingesteld worden op drie hoogtes 520mm - 900mm of 1300mm. Qua prestaties is dit model identiek aan de TT1350/12T met als verschil dat dit model is voorzien van een benzinemotor van 6.5 PK(Briggs & Stratton). Met behulp van deze motor levert deze houtklover een kracht tot 11 ton! Daardoor is de klover geschikt om meerdere houtsoorten te splijten. Dankzij het compacte design is deze klover gemakkelijk op te bergen of te verplaatsen. Eenvoudig verrijdbaar dankzij de rubberen banden.
BELMASH SDM-2500 is the most powerful, most functional and productive machine in its class in the world! It is possible to saw wood with a height of 117 mm, and this with 100% attention to safety.
Functions: sawing at different angles, planing, drilling, milling, grooving, safety pressers and optional thicknessing device and mortising table.
These portable and compact planers and saws 230V are unique on the market.
Be sure to check out the VIDEO
They work with very powerful induction motors compared to all other machines of its kind.
An induction motor has 30% more power than a carbon brush motor and is more than 40% quieter. Moreover, it is maintenance-free as no carbon brushes need to be replaced. Furthermore, they are driven in an industrial way by means of poly belts instead of classic V-belts. The construction of the frame is also very unique and robust, as 3.5 mm thick sheet steel is used. This together guarantees excellent performance, but also optimal resistance for your machine.
Thanks to the micro-lifting system of the planing tables, the planing depth can be set very accurately and smoothly, but the tables can also be closed completely in a fast way. By fully closing the tables, the saw table has a large work surface. This SDM2500 has a very clear and accurate reading for every setting.
The guide can be blocked both in front of and behind the work table, which guarantees stable and precise work. It can also be angled with a very clear reading, and this for both the planer and the sawing function. For the sawing machine there is also a miter gauge with clear reading.
The cutting height is easily adjustable from 0 to 117mm by a robust handle and handy and large lock nut. Furthermore, the machine is also equipped for working with rabbet or rebating cutters up to 12mm thickness, which are perfectly adjustable in height. Supplied as standard with safety pressers on the planer.
Optionally, an additional thicknesser can be obtained which is driven by a poly V-belt. In addition to the standard milling table, a mortising table is also available.
Due to the high-quality construction of these compact machines such as thick sheet steel, direct drive, induction motors, high-quality ball bearing, large and robust set and rotary handles, this machine has an enormous user comfort with excellent performance and an optimal service life.
The switch is located on a rotating arm and can be freely rotated to the right or left, in order to fix it in the most favorable position and to work safely at all times.
The portable multifunctional woodworking machine is standard equipped with: clamping device, saw guide, saw blade with splitting wedge, ruler, cover plate, handle (thumbscrew), miter guide, insert, planer knives in knife block, bracket, operating manual.
This concrete grinder was specially designed for grinding away concrete parts, sanding down old concrete layers or removing transitions between formwork and concrete runners. Optimal preparation for further coatings. The concrete sander has a metal housing and dust extraction. This extraction prevents dust nuisance, which in turn reduces disc wear and keeps the concrete pores open. Equipped with a diamond head grain 24 and a reliable 2100W motor. A blocking system has also been fitted so that the diamond heads can be changed safely. Vibration-damping, ergonomic handle (rotates 90°) for optimal handling and control of the device. An airflow cooling system reduces noise pollution to an absolute minimum. Max speed 6,600.
Weight
0,05 kg
1 kg
1 kg
28 kg
1 kg
3,00 kg
17 kg
1 kg
80 kg
0,5 kg
1,5 kg
3 kg
2 kg
30 kg
1 kg
15 kg
0,5 kg
0,05 kg
150 kg
1 kg
5 kg
5 kg
272 kg
120 kg
80 kg
ND
3 kg
0,5 kg
0,5 kg
1 kg
300 kg
2,5 kg
1 kg
1 kg
0,5 kg
0,5 kg
0,5 kg
2 kg
3 kg
220 kg
0,5 kg
1 kg
1 kg
4 kg
17 kg
1 kg
0,5 kg
0,05 kg
18 kg
10 kg
10 kg
14 kg
0,05 kg
1,1 kg
0,5 kg
180 kg
68 kg
3 kg
Dimensions
0,4 cm
ND
ND
ND
600 cm
ND
ND
ND
ND
76,2 cm
ND
ND
ND
ND
ND
ND
ND
ND
130 × 80,5 × 190 cm
ND
ND
ND
115,5 × 52,5 × 95,5 cm
170 × 50 × 100 cm
ND
ND
ND
ND
ND
ND
730 × 1730 × 2280 cm
ND
ND
ND
ND
ND
ND
11,4 cm
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
620 × 490 × 420 cm
ND
ND
ND
0,4 cm
ND
ND
ND
93 × 59,5 × 39 cm
ND
Additional information
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1 kg
Poids
1 kg
Poids
28 kg
Poids
1 kg
Dimensions
600 cm
Diamètre
100mm
Poids
3,00 kg
Puissance
1200W
toeren per minuut
(speed control) 120 – 250tr/min
slagen per minuut
2800 strokes/min
boordiepte
40MM (concrete)
Poids
17 kg
Moteur
0,33 ch
Inclinaison
45°
Puissance
400 W
Grain
K40, K60, K80, K100, K120, 150
Table de travail
160 x 225 mm
Disque
150 mm
Bande à poncer
915 x 100 mm
Poids
1 kg
Diamètre
125mm
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
2
nombre de dents
4
Longeur de coupe
32mm
Hauteur de rainure
50mm
RPM Min-Max
6100-10600
Poids
80 kg
Epaisseur de coupe maximale
125 mm
Diamètre lame de scie
400mm
Alésage
30 mm
Coupe 0° x 0°
125 x 205 mm
Coupe 0° x 45°
205 x 65 mm
Coupe 45° x 0°
125 x 145 mm
Coupe 45° x 45°
145 x 65 mm
Puissance
3400 W
Voltage
230 V, 400 V
Moteur
4.5 CV
Poids
0,5 kg
Dimensions
76,2 cm
Poids
1,5 kg
Puissance
180W
Schuuroppervlakte
80x130mm
Ø Rotatie
2mm
Nominale snelheid
7000-12500rpm
Vibrations
14000-25000/min
Poids
3 kg
Longueur
1270 mm
Poids
2 kg
Poids
30 kg
Avec plaqueuse de chants
PEB200+, PEB250+
Puissance
830W
Contenu du bac à colle
230cm³
Température (avec PEB200+)
170°C
Vitesse de travail (avec PEB200+)
3.6m/min
Température (avec PEB250+)
120 – 200°C
Vitesse de travail (avec PEB250+)
2-6m/min
Min-Max. hauteur de chant
10-62mm
Min-Max. épaisseur de chant
0.4-3mm
Poids
1 kg
Diamètre
160mm
Diamètre de l\' arbre
30 mm
Faces de coupe
2
Hauteur de rainure
50mm
RPM Min-Max
5000-7500
Poids
15 kg
Poids
0,5 kg
Longueur
3345mm
Largeur
20mm
Largeur
0,80mm
Poids
0,05 kg
Poids
150 kg
Dimensions
130 × 80,5 × 190 cm
Moteur
2 PK
Voltage
230 V
Sortie
203mm – 3x100mm
Air Speed
2270m³/h
Ventilateur
300mm
Niveau sonore
76dB
Poubelle
103L
Sac à filtrer
500x720mm
Sac
500x1050mm
Poids
1 kg
Poids
5 kg
Poids
5 kg
Puissance
2300W
toerental
6500 tpm
Poids
272 kg
Dimensions
115,5 × 52,5 × 95,5 cm
Moteur
4 CV, 5 CV
Voltage
230 V, 3 x 400V
Largeur de rabotage
310 mm
Dimensions tables de dégauchissage
1380x310mm
Ø arbre de rabotage
70mm
Vitesse à vide de l'arbre
4800rpm
Nombre de couteaux
3
Dimensions de couteaux
310x19x1mm
Profondeur de rabotage-dégauchissage
4mm
Dimensions de la table d'épaisseur
540x306mm
Hauteur de la raboteuse
225mm
Profondeur de rabotage
3mm
Vitesse d'alimentation de la raboteuse
6m/min
Poids
120 kg
Dimensions
170 × 50 × 100 cm
Voltage
230 V
Moteur
2.6 kW
Diameter briketten
5,4 cm
Lengte briketten
3-5 cm
Max. vochtigheid van het gebruikte materiaal
15 %
Werkdruk
8 tonnes, 170 bar
Uitvoer
6 – 12 kg per hour
Poids
80 kg
Epaisseur de coupe maximale
125 mm
Diamètre lame de scie
400mm
Alésage
30 mm
Coupe 0° x 0°
125 x 205 mm
Coupe 0° x 45°
205 x 65 mm
Coupe 45° x 0°
125 x 145 mm
Coupe 45° x 45°
145 x 65 mm
Puissance
3400 W
Voltage
230 V, 400 V
Moteur
4.5 CV
Poids
3 kg
Puissance
2000W
Flexpad
175 mm
Schuurdisk
175 mm
Onbelast toerental
800-2750 TPM
Poids
0,5 kg
Poids
0,5 kg
Diamètre
100mm
Poids
1 kg
Poids
300 kg
Dimensions
730 × 1730 × 2280 cm
Puissance
4PK
aantal filters
15
Filter afmetingen
160 x 1030 mm
filtratie oppervlakte
7.75 m2
afvalopslag
metal container (60x60x72cm)
capaciteit
3500m3
Poids
2,5 kg
Puissance
740 W
Paneeldikte
10-44 mm
Poids
1 kg
Puissance
95W
Afmetingen werkvlak
150x150mm
Vacuümdruk
750mbar
Poids
1 kg
Diamètre
125mm
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
2
Hauteur de rainure
50mm
RPM Min-Max
6100-10600
Poids
0,5 kg
Poids
0,5 kg
Compatible avec
Établi Kreg® mesurant 508 x 1117 mm ou 711 x 1117 mm.
Poids
0,5 kg
Diamètre
100mm
Poids
2 kg
Dimensions
11,4 cm
Poids
3 kg
Poids
220 kg
Moteur
3 CV
Voltage
230 V
Diamètre de l\' arbre
30 mm
Vitesse à vide
4.000rpm, 6.000rpm, 8.000rpm, 10.000rpm
Trou de fraisage
38mm, 70mm, 100mm, 140mm
Hauteur de rainure
100mm
Table de travail
556x716mm, 220x716mm
Guide
400x120mm
Connexion d\'extraction
100 mm
Hauteur de travail
860mm
Chassis
590x530mm
Guide d'onglet
-60° – +60°
Poids
0,5 kg
Poids
1 kg
Poids
1 kg
Plage de serrage
15cm, 30cm, 45cm, 60cm, 90cm, 125cm
Profondeur de serrage
9,4cm
Force de serrage
300kg
Poids
4 kg
Poids
17 kg
Puissance
1500W
Voltage
230 V
Largeur de rabotage
270 mm
Schaafdiepte
0-3 mm
Vitesse raboteuse
12.400
Longueur
490mm
Poids
1 kg
Longueur
150mm
Poids
0,5 kg
Diamètre
100mm
Poids
0,05 kg
Diamètre
55mm
Longueur
90mm
Queue
10x60mm
Poids
18 kg
Dimensions
620 × 490 × 420 cm
Epaisseur de coupe maximale
40 mm
Voltage
230 V
Puissance
1600 W
Coupe 0° x 0°
150 x 70 mm
Coupe 0° x 45°
100 x 70 mm
Coupe 45° x 0°
150 x 45 mm
Coupe 45° x 45°
55 x 45 mm
Diamètre lame de scie
255 mm
Poids
10 kg
Diameter kogels
25 mm
Aantal kogels
63 (9 x 7)
Max. draagkracht
200 kg
Hauteur
650-1100 mm
Poids
10 kg
Poids
14 kg
Puissance
1500W
Voltage
230 V
Largeur de rabotage
200 mm
Schaafdiepte
0-3 mm
Vitesse raboteuse
12.400
Longueur
490mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1,1 kg
Poids
0,5 kg
Longueur
4670mm
Largeur
27mm
Largeur
0,90mm
Poids
180 kg
Moteur
6 PK
Max. lengte hout
1000mm
Max. Ø hout
450mm
Poids
68 kg
Dimensions
93 × 59,5 × 39 cm
Moteur
3.5 CV
Voltage
230 V
Profondeur de coupe 90 °
117 mm
Max. hauteur avec fraise rainure
22 mm
Diamètre lame de scie
315mm
Diamètre de l\' arbre
30 mm
Vitesse de la lame de scie
2850
Largeur de rabotage
270 mm
Nombre de couteaux
2
Prof. de rabotage maximale
3 mm
Vitesse raboteuse
7700
Queue maximale de la fraise
12 mm
Poids
3 kg
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy