Description | Ce support mural peut être facilement fixé au mur et serre vos vane d'arrêts. Les vannes d'arrêt qui pendent sont souvent difficiles à utiliser, ce support résout ce problème. | Using this easy upgrade you are able to elavate the filtration of your AF1020 Dust Extractor up to 30 times, significantly improving the air quality in your workshop. The high quality folded filter catches dust and finer particles down to 1µm, compared to 30µm for the standard filter and 5µm for the fibre filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove all dust piled up in the folds of the filter, the dust will fall down in the PVC waste bags below. | Rail de guidage ou gabarit de fraisage pour les cercles et ovales de diamètre maximum et d'axe principal 3200mm. Cette gabarit est idéale pour fabriquer des miroirs, des fenêtres, des portes ou toute autre création de forme circulaire ou elliptique. Pour fraiser une forme elliptique, utilisez à la fois les deux supports pivotants et des guides allongés. En utilisant un seul des deux supports tournants, vous pouvez fraiser des cercles parfaits. Placez le support exactement au milieu du gabarit pour faire des cercles.
Le gabarit est équipé de deux puissantes ventouses pour se fixer à vos panneaux sans les endommager. S'il n'est pas possible d'utiliser les ventouses (par exemple sur des matériaux poreux), le gabarit est pourvu de trous pour les visser. Livraison standard avec deux tiges (Ø8mm) pour fixer la fraiseuse au guide. | This powerful diamond wall cutter is designed for pulling trenches for power lines. The device is equipped with high-quality electronics with built-in overload protection. At the same time, a current limitation was provided when the device was started up. This enhances safe and correct use, even for beginners. The desired milling width can be set quickly. Finally, it is possible to connect a hoover directly to the unit, which makes work considerably easier. | Replacement waste bags PVC 120µm to be used with the Air Flux dust extractors. These bags are compatible with the Air Flux Dusty 1020AF. | Jeu de 4 outils PowerGrip incontournables pour le tournage, pourvus de plaquettes en carbure remplaçables. | Set profielmessen hoogte 40mm Nr. 0053 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | SHOWROOM MODEL - NEW
The sander TT1220 can be used vertically, horizontally or at any angle. The large aluminium table can be tilted up to 45° and is equipped with a protractor. |
Content | Ce support mural peut être facilement fixé au mur et serre vos vane d'arrêts. Les vannes d'arrêt qui pendent sont souvent difficiles à utiliser, ce support résout ce problème. | Using this easy upgrade you are able to elavate the filtration of your AF1020 Dust Extractor up to 30 times, significantly improving the air quality in your workshop. The high quality folded filter catches dust and finer particles down to 1µm, compared to 30µm for the standard filter and 5µm for the fibre filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove all dust piled up in the folds of the filter, the dust will fall down in the PVC waste bags below. | Rail de guidage ou gabarit de fraisage pour les cercles et ovales de diamètre maximum et d'axe principal 3200mm. Cette gabarit est idéale pour fabriquer des miroirs, des fenêtres, des portes ou toute autre création de forme circulaire ou elliptique. Pour fraiser une forme elliptique, utilisez à la fois les deux supports pivotants et des guides allongés. En utilisant un seul des deux supports tournants, vous pouvez fraiser des cercles parfaits. Placez le support exactement au milieu du gabarit pour faire des cercles.
Le gabarit est équipé de deux puissantes ventouses pour se fixer à vos panneaux sans les endommager. S'il n'est pas possible d'utiliser les ventouses (par exemple sur des matériaux poreux), le gabarit est pourvu de trous pour les visser. Livraison standard avec deux tiges (Ø8mm) pour fixer la fraiseuse au guide. | This powerful diamond wall cutter is designed for pulling trenches for power lines. The device is equipped with high-quality electronics with built-in overload protection. At the same time, a current limitation was provided when the device was started up. This enhances safe and correct use, even for beginners. The desired milling width can be set quickly. Finally, it is possible to connect a hoover directly to the unit, which makes work considerably easier. | Replacement waste bags PVC 120µm to be used with the Air Flux dust extractors. These bags are compatible with the Air Flux Dusty 1020AF. | Jeu de 4 outils PowerGrip incontournables pour le tournage.
Les outils sont équipés de plaques en carbure remplaçables qui durent plus longtemps, sont super tranchants et n'ont pas besoin d'être réaffûtés.
C'est un kit de démarrage idéal pour tous ceux qui veulent se lancer dans le tournage sur bois.
Le jeu est composé comme suit: gouge à dégrossir 11 mm - gouge à dégrossir 11 mm radius 2" - gouge à creuser ronde 12 mm - bédane de détail 10 mm | Set profielmessen hoogte 40mm Nr. 0053 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | The sander TT1220 can be used vertically, horizontally or at any angle. The large aluminium table can be tilted up to 45° and is equipped with a protractor. The work table is supported on both sides for precision use. It features a D handle for easy transport, and a quick-release sanding belt system for quick changes. The belt can be easily balanced thanks to the handy control knob. The machine also has a 60 mm extraction outlet.
This sander comes standard with an 80-grit sanding belt and disc. For the belt, grit 60, 100, 120 and 150 are also available. For the disc, grit 60, 100, 120, 150 and 220 are also available.
Can be used universally for the sanding of edges and surface and round grinding. |
Additional information |
|
Poids |
8 kg |
Dimensions |
50 cm |
|
Poids |
3 kg |
Minimum petit axe (ellips) |
600mm
|
Maximum grand axe (ellips) |
3200mm
|
Minimum diamètre (cercle) |
600mm
|
Maximum diamètre (cercle) |
3200mm
|
|
|
| |
Poids |
0,05 kg |
Dimensions |
0,4 cm |
|
Poids |
50 kg |
Inclinaison |
45°
|
Puissance |
750W
|
Grain |
K60, K80, K100, K120, 150, K220
|
Table de travail |
200 x 335 mm
|
Disque |
255 mm
|
Bande à poncer |
1250 x 150 mm
|
|