Description | Pièce de réduction à 4 pièces jusqu'à 100mm à utiliser avec les modèles differents des aspirateurs Air Flux. | Ce coupleur offre deux fonctions qui ne peuvent normalement être réalisées qu'en achetant plusieurs coupleurs et tuyaux. Tout d'abord, il divise la ligne principale en deux lignes avec une épissure en « Y » efficace et résistante aux obstructions. Deuxièmement, il réduit le diamètre du tuyau d'un seul tuyau de 100 mm à deux tuyaux de 63 mm, ce qui vous permet de vous connecter à des outils électriques généraux de plus petit diamètre, notamment des tables de toupie, des scies à ruban et une petite scie à table.
Astuce : Pour une efficacité maximale de votre extraction, les réducteurs doivent être placés le plus près possible de l'outil électrique. | This trimmer is identical to the trimmer FR156N, but the trimming head CA56U is included as standard in this set. The CA56U trimming allows to trim all the edges of the panel continuously in one pass. The trimming head has a large support surface for perfect stability on flat surfaces. The extra handle provides a better grip and increased comfort while working. The CA56U head is also an indispensable accessory for trimming corners. Using the supplied pen, you can easily create a support to place the machine horizontally. Thanks to this lever, you can easily trim vertically to also finish your corners beautifully. (see video) | Set profielmessen hoogte 40mm Nr. 0064 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Mandrin à cône Morse 2, avec clé et pivotant. | Adjustable cutterhead with reversible knives in high quality carbide metal (HW) for making thin precision grooves. Adjustable in height between 8mm and 15mm by means of spacer rings. Spacer rings included as standard. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm. | This heavy table (carriage) moves smoothly on ball bearings. To be mounted on the spindle moulder TT1003T from the Revolution range. | Le servante à rouleau réglable supporte de grandes pièces jusqu'à 60 kg. Rouleau à roulement à billes chromé avec une base robuste. La base a quatre points pour niveler le support de rouleau. Il est rapide et facile à changer du rouleau au billes Réglage de la hauteur de 60 cm à 100 cm. Le support à rouleau peut être rapidement plié pour le stockage lorsqu'il n'est pas utilisé. | Set profielmessen hoogte 50mm Nr. 2012 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Set profielmessen hoogte 40mm Nr. 0095 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | De TT255UTC biedt alle mogelijkheden van een kapzaag en is dankzij haar boventafel met geleider ook uitermate geschikt om planken in de lengte te zagen. Door haar compactheid en lage gewicht is ze bijzonder handig om mee te nemen bij werken op verplaatsing. |
Content | Pièce de réduction à 4 pièces jusqu'à 100mm à utiliser avec les modèles differents des aspirateurs Air Flux. | Ce coupleur offre deux fonctions qui ne peuvent normalement être réalisées qu'en achetant plusieurs coupleurs et tuyaux. Tout d'abord, il divise la ligne principale en deux lignes avec une épissure en « Y » efficace et résistante aux obstructions. Deuxièmement, il réduit le diamètre du tuyau d'un seul tuyau de 100 mm à deux tuyaux de 63 mm, ce qui vous permet de vous connecter à des outils électriques généraux de plus petit diamètre, notamment des tables de toupie, des scies à ruban et une petite scie à table.
Astuce : Pour une efficacité maximale de votre extraction, les réducteurs doivent être placés le plus près possible de l'outil électrique. | Radius trimmer, for trimming edges of PVC and veneer. Suitable for materials with a thickness between 2mm and 3mm. Using the right bits the machine can also process thicker material. Thanks to this machine you can trim the four sides of a panel in one passage, both for chamfering and rounding. Ideal for the manufacture of kitchen furniture or others containing the same type of edge. Standard delivery with a router bit in high-quality carbide and radius 2 for making round edges. Including collet Ø8mm. Unique to this type of trimmer from Virutex is the height control. Adjust the height of your machine with unparalleled precision thanks to the lever and the rotary mechanism.
Motor equipped with electronic speed control. Using the automatic brake on the ball bearing, you avoid damaging edges or panels. Included in this set is the trimming head CA56U. The CA56U trimming allows to trim all the edges of the panel continuously in one pass. The trimming head has a large support surface for perfect stability on flat surfaces. The extra handle provides a better grip and increased comfort while working. The CA56U head is also an indispensable accessory for trimming corners. Using the supplied pen, you can easily create a support to place the machine horizontally. Thanks to this lever, you can easily trim vertically to also finish your corners beautifully. (see video) | Set profielmessen hoogte 40mm Nr. 0064 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Mandrin à cône Morse 2, avec clé et pivotant. | Adjustable cutterhead with reversible knives in high quality carbide metal (HW) for making thin precision grooves. Adjustable in height between 8mm and 15mm by means of spacer rings. Spacer rings included as standard. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm. | This heavy table (carriage) moves smoothly on ball bearings. To be mounted on the spindle moulder TT1003T from the Revolution range. | Le servante à rouleau réglable supporte de grandes pièces jusqu'à 60 kg. Rouleau à roulement à billes chromé avec une base robuste. La base a quatre points pour niveler le support de rouleau. Il est rapide et facile à changer du rouleau au billes Réglage de la hauteur de 60 cm à 100 cm. Le support à rouleau peut être rapidement plié pour le stockage lorsqu'il n'est pas utilisé. | Set profielmessen hoogte 50mm Nr. 2012 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Set profielmessen hoogte 40mm Nr. 0095 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | De TT255UTC biedt alle mogelijkheden van een kapzaag en is dankzij haar boventafel met geleider ook uitermate geschikt om planken in de lengte te zagen. Door haar compactheid en lage gewicht is ze bijzonder handig om mee te nemen bij werken op verplaatsing.
Het gebruik van kogellagers op alle gewrichten zorgt voor een precieze draaibeweging van de tafel, de kop en het kantelsysteem. De compacte en lichte zaag heeft een persgegoten aluminium behuizing, een compact zaagblad van 255 mm met 48 tanden, een ruime, makkelijk te verstellen boventafel met robuuste geleider en een duidelijke verstekaanduiding. De motor heeft riemaandrijving, wat voor een groot koppel zorgt, en is achteraan geplaatst, waardoor de zaag een grote zaaghoogte heeft.
De TT255UTC is verder uitgerust met een ergonomische verticale D-handgreep, die ervoor zorgt dat de op- en neerbeweging eerder vanuit de pols dan vanuit de schouder uitgevoerd wordt. Een bijkomend voordeel van deze handgreep is dat hij zowel met de linker- als met de rechterhand gebruikt kan worden. |
Additional information |
|
Poids |
0,5 kg |
Diamètre |
63,5mm, 100mm
|
|
Poids |
2,2 kg |
Puissance |
750W
|
Nominale snelheid |
14000-30000rpm
|
Pince |
8mm
|
|
Poids |
0,05 kg |
Dimensions |
0,4 cm |
|
Cône Morse |
2
|
Avec clé |
Oui
|
|
Poids |
1 kg |
Diamètre |
160mm
|
Diamètre de l\' arbre |
30 mm, 50 mm
|
Faces de coupe |
4
|
nombre de dents |
4
|
Longeur de coupe |
30mm
|
Hauteur de rainure |
8-15mm
|
RPM Min-Max |
4800-8200
|
|
Poids |
20 kg |
Longueur |
1600mm
|
Tafel |
750x500mm
|
|
Poids |
4,2 kg |
Dimensions |
30 cm |
Supporte |
60kg
|
|
Poids |
0,05 kg |
Dimensions |
0,5 cm |
|
Poids |
0,05 kg |
Dimensions |
0,4 cm |
|
Poids |
18 kg |
Dimensions |
620 × 490 × 420 cm |
Epaisseur de coupe maximale |
40 mm
|
Voltage |
230 V
|
Puissance |
1600 W
|
Coupe 0° x 0° |
150 x 70 mm
|
Coupe 0° x 45° |
100 x 70 mm
|
Coupe 45° x 0° |
150 x 45 mm
|
Coupe 45° x 45° |
55 x 45 mm
|
Diamètre lame de scie |
255 mm
|
|