La Verticut TT2141DPM est une scie à panneaux verticale pour des panneaux de 4100 x 2100 mm et le modèle d'entrée de gamme de notre gamme de scies à panneaux professionnelles.
Kit de roues à monter sur différentes machines de notre gamme Comfort Line. Utilisez ce kit de roues pour déplacer facilement votre scie à ruban, votre scie à panneaux, votre raboteuse ou votre toupie dans l'atelier. Avec levier détachable pour une manipulation aisée.
Set profielmessen hoogte 40mm Nr. 0084 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The Ultralight spring foams are suitable for the FeatherPRO and FeatherDUO featherboards. Ultralight springs are less stiff than standard springs. This is achieved by a thinner neck on the spring hinge. Set of 2 pieces.
The Kreg KMA4600 Straight Edge Guide Extension is a 610mm (24”) extension for the Kreg Straight Edge Guide fence. With this extension, in combination with the Kreg Straight Edge Guide, you can saw neat and precise sheet material up to 1828 mm (72”)!
Whether you want to get started with your circular saw, jigsaw or edge mill, with the Kreg Straight Edge Guide fence and extension you create a precise and accurate result. This Kreg stop ruler extension is supplied with connectors to connect the extension to the ruler. The Kreg KMA4600 is made of anodized aluminum. This means that the extension lasts a long time, even with intensive use.
Ce ciseau à usages multiples est utilisé pour façonner et finir différentes surfaces.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVE660 or SVE670 model. No direct connection to the electric vacuum system SVE600 as model SVE660 or SVE670.
Cutterhead with reversible blades and spurs in high quality carbide (HW) for making precision grooves. Adjustable in height between 8mm and 15mm by means of spacer rings. Spacer rings included as standard. Use this cutterhead also for milling tenons or for rabbeting. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm.
Filtre électrostatique extérieur pour le système de filtration d'air AF150, qui filtre jusqu'à 98% de toutes les particules de poussière jusqu'à 5 microns.
Set profielmessen hoogte 40mm Nr. 0072 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
BOW push stick en PA, grip mousse EVA haute densité: réversible et remplaçable.
Mèche carbure ancre double à utiliser sur le rainureuse Virutex RA17VG. Cette fraise permet de fraiser les joints en silicone de type FS2 ou FS4.
Helical planing and routing cutterhead with reversible knives in high quality carbide (HW). This cutter head is developped for finishing, planing or calibrating on moulding machines. Optionally you can use a mold and run-up ring to make curved workpieces. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm. The heads can be fitted with spurs on one or both sides on demand.
Lame de scie avec 48 dents universel avec des dents de coupe inclinés alternes pour le sciage des matériaux stratifiés, des feuilles de placage double face ou des panneaux d’agglomérés empilés.
Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Cette presseur peut être utilisé sur le Belmash SDM2500.
Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. The blades are specially sheared so you can work faster and splinter free.
Set profielmessen hoogte 50mm Nr. 2015 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Adaptateur 1210
Set profielmessen hoogte 40mm Nr. 0077 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Voor het verbinden van panelen van 16 of 19mm dikte met behulp van deuvels (Ø8mm) of schroeven. Werk met een hoge precisie & hoogkwalitatieve afwerking, zonder de nood om achteraf bij te stellen. Deze positiegeleider is zowel geschikt om gaten te boren op de kopse kant, langsheen de zijkant, of op elke positie in het midden van het paneel. Maximumbreedte van het paneel om de geleider te plaatsen is 630mm. Standaardlevering met inzetstukken voor planken van 16 mm, verloopringen en boorstop.
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
Universal cutter head which can hold almost every profile knive currently available on the market. This cutter head can carry both profile knives of height 40mm or 50mm as well as replaceable and reversible knives up to height 50mm. Thanks to the pre-cutters at the top and bottom, your work always has a clean finish. Also suitable for rabbeting.
With its ergonomic shape, this handle helps you to easily transport panels in different materials. The handle has three basic functions: pulling, carrying or lifting. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. Suitable for panels between 0mm and 46mm thick.
Optionally, two clamps are available to be placed on the handle.
High-quality Virutex plunge-cut saw with a robust and ergonomic design. Using the optionally available guide rail, you always make perfectly straight and stable cuts. The saw fits directly on the rail, without additional accessories. Thanks to its powerful motor (1150W), this machine cuts easily through different materials. The motor is equipped with a soft start to prevent shocks at startup. The rapid stop of the saw blade and automatic shutdown in the event of an overload provide increased safety. Thanks to the anti-slip coating on the rear handle, you always have the machine under control while working. Equipped with a lever to easily adjust the blades or replace the saw blade.
Standard delivery with a Ø160mm saw blade and 20mm bore. This saw blade has 28 teeth for a fast cut on both wood and plastic.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 40mm Nr. 0064 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Didn't find the right template for your hinge? No worries, in addition to our standard range of templates for Argenta hinges, we offer the possibility of custom-made templates in collaboration with Virutex. For hinges of other brands, as well as locks or locking plates, you can come to us for a tailor-made solution. The templates are suitable for use on the Virutex FR129VB router.
Please note: we always need a sample of your hinge, lock, locking plate,... in order to be able to cut the template correctly.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
These straight router bits are suitable for smooth and well-finished edges on laminated and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Thanks to the cutting edges in high quality carbide metal, you can use this bit effortlessly on most types of wood.
Available in different cutting lengths.
Set of profile knives of height 40mm Nr. 0094 suited for universal moulding blocks. Used for moulding of wood at low costs. The steel alloy with 16% cobalt guarantees a high quality cut and a comfortable cutting process.
Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. The blades are specially sheared so you can work faster and splinter free.
Set profielmessen hoogte 50mm Nr. 2007 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Handige expansierol voor het gebruik van schuurhulzen op de Durotec borstelmachine. Deze expansierol dient steeds gebruikt te worden in combinatie met één van de schuurhulzen Duro-Sleeve.
Set profielmessen hoogte 40mm Nr. 0095 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Zaaglint met lengte 4670mm om te gebruiken op de TT50BS of TT61BS lintzaagmachine van Tendotools. Dit zaaglint beschikt over 2 TPI (tanden per inch) en heeft een breedte van 32mm. Dit zaaglint in gehard staal "Flexback" is erg geschikt voor multifunctioneel zagen. Gebruik dit zaaglint zowel voor hout als voor plastics. De tanden van het zaagblad kregen een extra thermische behandeling voor verhoogde hardheid. Hierdoor blijft de band erg soepel en verhoogt uw zaagcomfort dankzij de hardheid van de tanden.
Zaagblad met 8 tanden
Diamant zaagblad met vlakke, PCD diamanten tanden geschikt voor het verzagen van cementvezel, gipsplaten, glasvezelversterkte kunststoffen, solid surface materiaal en Eternit. Profiteer van een extreem lange standtijd dankzij de PCD diamanten zaagtanden. Met weinig tanden voor een snelle snede. Geluidsarm.
Vane d'arrêt en PVC à diamètre 125mm à utiliser avec les systèmes d'aspiration Air Flux.
Deze anti-slip pads zijn verkrijgbaar in drie verschillende maten en zijn een handig accessoire om kwetsbare delen te ondersteunen zoals gipsplaten etc.
Je hebt een breder druk oppervlakte en ze zijn voorzien van een zachte anti-slip EPDM rubber oppervlakte om geen beschadiging te krijgen.
Je klikt ze snel en makkelijk op alle types van de Multiprop.
Whether you are starting from scratch, renovating or repairing, the drawer front assembly tool is the simple and effective way to assemble and align drawer fronts. It removes the need to use one hand to hold pieces in place while you work. The thick steel design features large clamp pads, a GripMaxx non-slip surface and ribbed corners to minimize flexibility and maintain project stability.
The Drawer Front Mounting Tool reduces the clumsy hassle and repositioning required and simplifies the process to three simple steps: clamp, align, attach.
Includes left and right Carrier front mounting tools.
Combine it with the Setup and Spacer Shims (sold separately) for accurate and consistent openings and sight lines.
Content
La Verticut TT2141DPM est une scie à panneaux verticale peu encombrante pour des feuilles mesurant 4100 x 2100 mm.
Cette machine est le modèle d'entrée de gamme de notre assortiment de scies à panneaux professionnelles. Le bras de support professionnel lesté peut être déplacé horizontalement et la scie sur le bras de support est réglable verticalement.
Elle possède un châssis entièrement soudé avec des patins durcis en précision en bas et en haut. Le bras de support/mât lourd fonctionne très bien grâce au guide de barre résistant à l'usure avec double roulement à billes. Un support en hauteur est prévu pour le traitement des petits panneaux, ce qui vous permet de gagner du temps et de soulager votre dos. La machine est équipée d'une scie principale et d'un inciseur avec moteur à induction, qui empêche la rupture du laminé et de la couche supérieure pendant le sciage.
Les supports de panneau horizontaux rouges peuvent être facilement ajustés manuellement à l'aide du bras de levage pratique, pour éviter de les scier lors d'une coupe horizontale. Le support inférieur sur lequel repose le panneau est équipé de patins en plastique résistant à l'usure.
De plus, la machine est équipée d'arrêts rabbatables facilement réglables et d'une buse d'aspiration. Elle est disponible en option avec un moteur à induction de 5,5 kW.
Elle est transportée dans un camion spécial avec un plancher qui peut être abaissé presque entièrement.
Kit de roues à monter sur différentes machines de notre gamme Comfort Line. Utilisez ce kit de roues pour déplacer facilement votre scie à ruban, votre scie à panneaux, votre raboteuse ou votre toupie dans l'atelier. Avec levier détachable pour une manipulation aisée.
Set profielmessen hoogte 40mm Nr. 0084 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The Ultralight spring foams are suitable for the FeatherPRO and FeatherDUO featherboards. Ultralight springs are less stiff than standard springs. This is achieved by a thinner neck on the spring hinge. Set of 2 pieces.
The Kreg KMA4600 Straight Edge Guide Extension is a 610mm (24”) extension for the Kreg Straight Edge Guide fence. With this extension, in combination with the Kreg Straight Edge Guide, you can saw neat and precise sheet material up to 1828 mm (72”)!
Whether you want to get started with your circular saw, jigsaw or edge mill, with the Kreg Straight Edge Guide fence and extension you create a precise and accurate result. This Kreg stop ruler extension is supplied with connectors to connect the extension to the ruler. The Kreg KMA4600 is made of anodized aluminum. This means that the extension lasts a long time, even with intensive use.
Ce ciseau à usages multiples est utilisé pour façonner et finir différentes surfaces pendant le tournage entre les pointes.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVE660 or SVE670 model. No direct connection to the electric vacuum system SVE600 as model SVE660 or SVE670.
Cutterhead with reversible blades and spurs in high quality carbide (HW) for making precision grooves. Adjustable in height between 8mm and 15mm by means of spacer rings. Spacer rings included as standard. Use this cutterhead also for milling tenons or for rabbeting. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm.
Filtre électrostatique extérieur pour le système de filtration d'air AF150. Hij filtert tot 98 % van alle stofdeeltjes tot 5 micron.
Set profielmessen hoogte 40mm Nr. 0072 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Le PushPRO Push Stick offre une amélioration de la sécurité sans précédent et de nouveaux avantages innovants dans une catégorie d'outils qui n'a pratiquement pas vu d'innovations depuis des années.
Avec les pointes EVA haute densité, le PushPRO améliore le contrôle de l'avance, il protège le bois et vous protège ainsi que vos outils en cas de contact accidentel entre le poussoir et la lame de scie.
Le PushPRO empêche l'utilisation de plastique pour guider le bois. Lorsqu'une pression est appliquée, le plastique peut affecter la porosité de certains bois.
Le plastique n'absorbe pas les vibrations grâce à la mousse haute densité utilisée dans le PushPRO. PushPRO offre une meilleure coupe qu'un poussoir en plastique.
Mèche carbure ancre double à utiliser sur le rainureuse Virutex RA17VG. Cette fraise permet de fraiser les joints en silicone de type FS2 ou FS4.
Helical planing and routing cutterhead with reversible knives in high quality carbide (HW). This cutter head is developped for finishing, planing or calibrating on moulding machines. Optionally you can use a mold and run-up ring to make curved workpieces. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm. The heads can be fitted with spurs on one or both sides on demand.
Lame de scie avec 48 dents universel avec des dents de coupe inclinés alternes pour le sciage des matériaux stratifiés, des feuilles de placage double face ou des panneaux d’agglomérés empilés. À utiliser sur scies à panneaux horizontales. Choisissez le bon nombre de dents pour un résultat optimal de votre projet. Un faible nombre de dents convient pour les travaux de sciage rapide et grossier. Un nombre élevé de dents nécessite une vitesse de coupe plus lente, mais assure une coupe fine et nette.
Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Cette presseur peut être utilisé sur le Belmash SDM2500.
Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. The blades are specially sheared so you can work faster and splinter free.
Set profielmessen hoogte 50mm Nr. 2015 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Adaptateur 1210
Set profielmessen hoogte 40mm Nr. 0077 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Voor het verbinden van panelen van 16 of 19mm dikte met behulp van deuvels (Ø8mm) of schroeven. Werk met een hoge precisie & hoogkwalitatieve afwerking, zonder de nood om achteraf bij te stellen. Deze positiegeleider is zowel geschikt om gaten te boren op de kopse kant, langsheen de zijkant, of op elke positie in het midden van het paneel. Maximumbreedte van het paneel om de geleider te plaatsen is 630mm. Standaardlevering met inzetstukken voor planken van 16 mm, verloopringen en boorstop.
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
Universal cutter head which can hold almost every profile knive currently available on the market. This cutter head can carry both profile knives of height 40mm or 50mm as well as replaceable and reversible knives up to height 50mm. Thanks to the pre-cutters at the top and bottom, your work always has a clean finish. Also suitable for rabbeting.
With its ergonomic shape, this handle helps you to easily transport panels in different materials. The handle has three basic functions: pulling, carrying or lifting. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. Suitable for panels between 0mm and 46mm thick.
Optionally, two clamps are available to be placed on the handle.
High-quality Virutex plunge-cut saw with a robust and ergonomic design. This saw delivers very precise cuts thanks to a depth adjustment between 0mm and 55mm. In addition, this plunge-cut saw can cut up to 13.5 mm from a vertical edge. Using the optionally available guide rail, you always make perfectly straight and stable cuts. The saw fits directly on the rail, without additional accessories. Thanks to its powerful motor (1150W), this machine cuts easily through different materials. The motor is equipped with a soft start to prevent shocks at startup. The rapid stop of the saw blade and automatic shutdown in the event of an overload provide increased safety. Thanks to the anti-slip coating on the rear handle, you always have the machine under control while working. Equipped with a lever to easily adjust the blades or replace the saw blade.
Standard delivery with a Ø160mm saw blade and 20mm bore. This saw blade has 28 teeth for a fast cut on both wood and plastic.
With the 125-mm diameter grooving saw blade and faceted V-tooth, you can also use this plunge-cut saw perfectly to make paneling in hardwood, softwood, laminated panels and other wood-based products.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. The router bit is solid carbide, with special micrograin finishing for best performance. Thanks to these combined qualities the router bit delivers high quality results for all your projects and a long working life. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 40mm Nr. 0064 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Didn't find the right template for your hinge? No worries, in addition to our standard range of templates for Argenta hinges, we offer the possibility of custom-made templates in collaboration with Virutex. For hinges of other brands, as well as locks or locking plates, you can come to us for a tailor-made solution. The templates are suitable for use on the Virutex FR129VB router.
Please note: we always need a sample of your hinge, lock, locking plate,... in order to be able to cut the template correctly.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
These straight router bits are suitable for smooth and well-finished edges on laminated and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Thanks to the cutting edges in high quality carbide metal, you can use this bit effortlessly on most types of wood.
Set of profile knives of height 40mm Nr. 0094 suited for universal moulding blocks. Used for moulding of wood at low costs. The steel alloy with 16% cobalt guarantees a high quality cut and a comfortable cutting process.
Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. The blades are specially sheared so you can work faster and splinter free.
Set profielmessen hoogte 50mm Nr. 2007 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Voor het gebruik van schuurhulzen is er een handige oplossing beschikbaar. Deze worden eenvoudig over de expansierol geschoven en dankzij de centrifugale kracht worden ze stevig gespannen. Op deze manier blijven de schuurhulzen veilig op hun plaats tijdens het schuren, waardoor u efficiënt en nauwkeurig kunt werken. Deze methode zorgt voor een optimale grip en maakt het gemakkelijk om snel van schuurmiddelen te wisselen. Het gebruik van schuurhulzen op de Durotec borstelmachine is nog nooit zo handig geweest!
Set profielmessen hoogte 40mm Nr. 0095 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Zaaglint met lengte 4670mm om te gebruiken op de TT50BS of TT61BS lintzaagmachine van Tendotools. Dit zaaglint beschikt over 2 TPI (tanden per inch) en heeft een breedte van 32mm. Dit zaaglint in gehard staal "Flexback" is erg geschikt voor multifunctioneel zagen. Gebruik dit zaaglint zowel voor hout als voor plastics. De tanden van het zaagblad kregen een extra thermische behandeling voor verhoogde hardheid. Hierdoor blijft de band erg soepel en verhoogt uw zaagcomfort dankzij de hardheid van de tanden.
Zaagblad met 6 tanden
Diamant zaagblad met vlakke, PCD diamanten tanden geschikt voor het verzagen van cementvezel, gipsplaten, glasvezelversterkte kunststoffen, solid surface materiaal en Eternit. Profiteer van een extreem lange standtijd dankzij de PCD diamanten zaagtanden. Met weinig tanden voor een snelle snede. Geluidsarm.
Vane d'arrêt en PVC à diamètre 125mm à utiliser avec les systèmes d'aspiration Air Flux.
Deze anti-slip pads zijn verkrijgbaar in drie verschillende maten en zijn een handig accessoire om kwetsbare delen te ondersteunen zoals gipsplaten etc.
Je hebt een breder druk oppervlakte en ze zijn voorzien van een zachte anti-slip EPDM rubber oppervlakte om geen beschadiging te krijgen.
Iets klem zetten tegen een net perfect afgewerkte muur of plafond is dus geen enkel probleem als je deze anti-slip pads gebruikt!
Je klikt ze snel en makkelijk op alle types van de Multiprop.
Whether you are starting from scratch, renovating or repairing, the Drawer Front Mounting Tool is the simple and effective way to assemble and align drawer fronts. It removes the need to use one hand to hold pieces in place while you work. The thick steel design features large clamp pads, a GripMaxx non-slip surface and ribbed corners to minimize flexibility and maintain project stability.
The Drawer Front Mounting Tool reduces the clumsy hassle and repositioning required and simplifies the process to three simple steps: clamp, align, attach.
Includes left and right Carrier front mounting tools.
Combine it with the Setup and Spacer Shims (sold separately) for accurate and consistent openings and sight lines.
Weight
685 kg
2 kg
0,05 kg
0,5 kg
2 kg
0,500 kg
0,05 kg
1 kg
1 kg
1 kg
0,05 kg
1 kg
0,05 kg
1 kg
1 kg
3 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
0,5 kg
1 kg
1 kg
1 kg
4,7 kg
0,05 kg
0,05 kg
0,1 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
0,300 kg
0,05 kg
0,5 kg
1 kg
0,5 kg
ND
1 kg
Dimensions
2950 × 5500 × 1200 cm
ND
0,4 cm
ND
ND
380 cm
ND
ND
ND
ND
0,4 cm
ND
ND
ND
ND
30 × 26 × 7 cm
ND
0,5 cm
ND
0,4 cm
63 cm
ND
ND
ND
ND
ND
0,4 cm
ND
ND
ND
0,4 cm
ND
0,5 cm
10 × 10 cm
0,4 cm
ND
ND
ND
ND
ND
Additional information
Poids
685 kg
Dimensions
2950 × 5500 × 1200 cm
Diamètre lame de scie
250mm
Voltage
3 x 400V
Mât
Manuel
Epaisseur de coupe maximale
60 mm
Hauteur de coupe maximale
2100 mm
Longueur de coupe maximale
4100 mm
Moteur de base
3 kW
Vitesse du moteur
3000 t/min
Vitesse de l'inciseur
5800 t/min
Support du panneau
Glissières en plastique
Poids
2 kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,5 kg
Poids
2 kg
Longueur
610 mm
Poids
0,500 kg
Dimensions
380 cm
Largeur de la lame
10 mm
Profondeur de la lame
8 mm
Longueur utile de la lame
160 mm
Poids
0,05 kg
Diamètre
25mm
Longeur de coupe
32mm
Longueur
73mm
Queue
12mm
Faces de coupe
2
Poids
1 kg
Puissance
95W
Afmetingen werkvlak
150x150mm
Vacuümdruk
750mbar
Poids
1 kg
Diamètre
250mm
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
4
nombre de dents
4
Longeur de coupe
90mm
Hauteur de rainure
8-15mm
RPM Min-Max
3000-5000
Poids
1 kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1 kg
Poids
0,05 kg
Poids
1 kg
Diamètre
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
12
Hauteur de rainure
76,5mm
RPM Min-Max
6000-17600
Poids
1 kg
Diamètre lame de scie
280mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,2mm
Epaisseur lame de scie
2,2mm
nombre de dents
48
Poids
3 kg
Dimensions
30 × 26 × 7 cm
Hauteur max. de la pièce
63mm
Largeur max. de la pièce
270mm
Poids
0,05 kg
Diamètre
19mm
Longeur de coupe
25mm
Longueur
72mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,05 kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,5 kg
Dimensions
63 cm
Poids
1 kg
Poids
1 kg
Diamètre
120mm
Diamètre de l\' arbre
50 mm
Hauteur de rainure
50mm
Poids
1 kg
Max. Draagkracht
70kg
Poids
4,7 kg
Puissance
1100W
Diamètre lame de scie
160mm
Profondeur de coupe 45°
35mm
Profondeur de coupe 90 °
55mm
Nominale snelheid
5500rpm
Poids
0,05 kg
Diamètre
5mm
Longeur de coupe
11mm, 16mm
Longueur
51mm, 55mm
Faces de coupe
2+1
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,1 kg
Poids
0,05 kg
Diamètre
16,7mm
Longeur de coupe
8mm
Longueur
47mm
Rayon
R2
Queue
8mm
Faces de coupe
2
Poids
0,05 kg
Diamètre
12,7mm
Longeur de coupe
25mm, 38mm, 51mm
Longueur
84mm, 98mm, 106mm
Queue
12mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Diamètre
19mm
Longeur de coupe
16mm
Longueur
60mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,300 kg
Dimensions
10 × 10 cm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,5 kg
Longueur
4670mm
Largeur
32mm
Dikte
0,90mm
Poids
1 kg
Diamètre lame de scie
230mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
2,4mm
Epaisseur lame de scie
1,6mm
nombre de dents
6
Orifices de traction
2/7/42
Poids
0,5 kg
Diamètre
125mm
Poids
ND
Longueur
20cm, 35cm, 70cm
Largeur
6cm
Poids
1 kg
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy