Porte outils en métal léger avec des lames en carbure de tungstène (HW) de haute qualité pour l'arrondissage universel. L'ensemble est livré dans un coffret en plastique robuste. Les lames de rayon 5/10 sont installées en standard sur le porte outils. Les lames de rayon R3/6 et R4/8 sont incluses dans l'étui. Grâce aux lames en carbure de tungstène, cette porte outils pour bouvetage coupe sans effort dans les planches ou les bois massifs. Convient également pour une utilisation avec du contreplaqué ou des panneaux de particules.
Disponible avec un alésage de 30 mm ou 50 mm.
Capot à poussière en PVC noir avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La dimension de l'ouverture est 340x180mm.
This wheelbase from Belmash is compatible with the Universal 2000, SDM2500, SDMR2500 and SDR2200 machines. Place your Belmash machine at an ideal height and make it mobile.
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Reducer with diameter 100-60mm to be used with the Air Flux dust extractors.
Set profielmessen hoogte 40mm Nr. 0065 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Replacement waste bags PVC 120µm to be used with the Air Flux dust extractors. These bags are compatible with the Air Flux Dusty 1020AF.
Raccord à diamètre 100-50mm à utiliser avec les systèmes d'aspiration Air Flux.
Made from Bow Products' exclusive EVA material blend, Bow Products' handy 123 blocks are a valuable addition to any workshop. The unique EVA material is extremely strong and durable, and the blocks are finished in the recognisable BOW green colour, so you can always find them easily.
Unlike harder materials such as wood, EVA is easy to cut and leaves barely noticeable marks when using a saw or drill. Moreover, EVA does not stick to hot plotters.
The EVA blocks retain their shape and rigidity over time and with repeated use. As EVA is a closed-cell technology, it will not release material to other surfaces or cutters. So you don't have to worry about any damage to materials or finished surfaces.
These versatile blocks are excellent for numerous applications. Moreover, they are available in three different block sizes, so you can choose based on the depth or height requirements of your projects.
Wielkit om te monteren op verschillende machines uit onze Comfort Line-reeks. Gebruik deze wielkit om uw lintzaag, paneelzaag, vlak- en vandiktebank of toupie gemakkelijk door het atelier te verplaatsen. Met afneembare hendel om eenvoudig te besturen.
This set consists of two cutter heads in light metal, equipped with tungsten carbide knives (HW). Make solid connections using the profile counterprofile cutter, or machine different profiles using the panel raising cutter. Together, these two cutter heads offer you everything you need to make high-quality, beautifully finished kitchen cabinet doors.
The profile cutter type A is fitted as standard to the profile counterprofile cutter (YH102BAM). Type B, C and D are also available on request. This cutter head has a diameter of 130mm.
The panel raising cutter (YH102BAM) consists of two knives that can be adjusted independently of each other. By aligning the knives differently in relation to each other, you have the possibility to create different profiles, for example with or without an upright edge. This cutter head has a diameter of 200mm. The milling height and cutting length depend on how you set the knives.
Set profielmessen hoogte 40mm Nr. 0039 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Universal left-right toothed saw blade with 72 teeth suitable for sawing different types of wood, laminated materials, MDF, double-sided veneer boards or chipboards in stack.
Wall-mounted blast gate, diameter 100mm, for use in combination with the Air Flux dust extraction systems.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Set profielmessen hoogte 40mm Nr. 0003 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Sacs supplémentaires en PVC 120µm pour la poubelle de l'aspirateur Air Flux 3000CKH. Ces sacs sont approprié pour utilisation avec le poubelle.
Showroommodel
230VWITH FREE ACCESSORIES:+ SPINDLE FOR ROUTERS 8, 10 & 12 MM+ ADDITIONAL SPINDLE 20 MM+ MOBILE BASE+ MITRE GUIDE
The Itamac Eagle series are high-quality spindle moulding machines, specifically developed for professional routing applications. Designed with both functionality and comfort in mind, this machine has every possible function for a spindle moulder in this class. Equipped with an extra-heavy chassis, a solid cast-iron protective cover with aluminium guides and fine adjustment. The powerful 230V or 400V motor delivers 3HP and ensures that this table can handle almost any routing task. The Itamac Eagle HW300E has a 30 mm shaft. With the optionally available shaft and collets, the machine can also be used for profiling with the aid of router bits. The large cast iron table guarantees the necessary stability during work. Can be used at four speeds, with centralised control panel above the machine.
This model is equipped with a high-quality 1400 mm sliding system with flip-stop.
Carbide chain with widia teeth for mobile chain saw for aerated concrete MCS400.
Set of 4 indispensable PowerGrip tools for woodturning, equipped with replaceable carbide plaques.
Cette base mobile de Belmash est compatible avec les machines Universal 2000, SDM2500, SDMR2500 et SDR2200. Placez votre machine Belmash à une hauteur idéale et rendre mobile.
Volledige set buizen en accessoires voor bevestiging aan de muur in atelier, om met één stofzuiger afzuiging te voorzien aan elke machine.
Four part reducer up to diameter 100mm to be used with the different models of Air Flux Dust extractors.
Modèle d'exposition ! Machine inutilisée
Une machine compacte aux multiples possibilités
Grandes roues pivotantes, pour un fonctionnement régulier.
2.2KW 3 HP
2 vitesses Courroie en poly 10 000 et 8 000 tr/min
Tourner à gauche et à droite
Opération par le haut
Comprend une broche de 30 mm, une broche interchangeable de 20 mm et des douilles de serrage pour la défonceuse.
Châssis sur roues inclus
Un outil indispensable pour tout bricoleur. Un multi-outil avec lequel vous pouvez tout faire. Cette meuleuse d'angle (puissance 2300W) est parfaitement adaptée aux travaux de meulage lourds. Il est alimenté par le réseau électrique. La meuleuse d'angle peut être utilisée pour couper le métal, le bois et la pierre, mais vous pouvez également l'utiliser pour enlever la rouille et écailler le métal.
Ce chariot de transport auto-serrant est la solution pour transporter facilement des portes, des cadres, des panneaux, etc. dans le secteur du bâtiment et dans les ateliers. Il a une capacité de charge allant jusqu'à 200 kg.
Content
Porte outils en métal léger avec des lames en carbure de tungstène (HW) de haute qualité pour l'arrondissage universel. L'ensemble est livré dans un coffret en plastique robuste. Les lames de rayon 5/10 sont installées en standard sur le porte outils. Les lames de rayon R3/6 et R4/8 sont incluses dans l'étui. Grâce aux lames en carbure de tungstène, cette porte outils pour bouvetage coupe sans effort dans les planches ou les bois massifs. Convient également pour une utilisation avec du contreplaqué ou des panneaux de particules.
Disponible avec un alésage de 30 mm ou 50 mm.
Capot à poussière en PVC noir avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La dimension de l'ouverture est 340x180mm.
This wheelbase from Belmash is compatible with the Universal 2000, SDM2500, SDMR2500 and SDR2200 machines. Place your Belmash machine at an ideal height and make it mobile.
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Reducer with diameter 100-60mm to be used with the Air Flux dust extractors.
Set profielmessen hoogte 40mm Nr. 0065 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Replacement waste bags PVC 120µm to be used with the Air Flux dust extractors. These bags are compatible with the Air Flux Dusty 1020AF.
Raccord à diamètre 100-50mm à utiliser avec les systèmes d'aspiration Air Flux.
Made from Bow Products' exclusive EVA material blend, Bow Products' handy 123 blocks are a valuable addition to any workshop. The unique EVA material is extremely strong and durable, and the blocks are finished in the recognisable BOW green colour, so you can always find them easily.
Unlike harder materials such as wood, EVA is easy to cut and leaves barely noticeable marks when using a saw or drill. Moreover, EVA does not stick to hot plotters.
The EVA blocks retain their shape and rigidity over time and with repeated use. As EVA is a closed-cell technology, it will not release material to other surfaces or cutters. So you don't have to worry about any damage to materials or finished surfaces.
These versatile blocks are excellent for numerous applications. Moreover, they are available in three different block sizes, so you can choose based on the depth or height requirements of your projects.
Wielkit om te monteren op verschillende machines uit onze Comfort Line-reeks. Gebruik deze wielkit om uw lintzaag, paneelzaag, vlak- en vandiktebank of toupie gemakkelijk door het atelier te verplaatsen. Met afneembare hendel om eenvoudig te besturen.
This set consists of two cutter heads in light metal, equipped with tungsten carbide knives (HW). Make solid connections using the profile counterprofile cutter, or machine different profiles using the panel raising cutter. Together, these two cutter heads offer you everything you need to make high-quality, beautifully finished kitchen cabinet doors.
The profile cutter type A is fitted as standard to the profile counterprofile cutter (YH102BAM). Type B, C and D are also available on request. Important features:
Ø 130mm
Z = 2
RPM min-max = 5800-10200
The panel raising cutter (YH102BAM) consists of two knives that can be adjusted independently of each other By aligning the knives differently in relation to each other, you have the possibility to create different profiles, for example with or without an upright edge. The milling height and cutting length depend on how you set the knives. Important features:
Ø 200mm
Z=2+2
RPM min-max = 3800-6500
Set profielmessen hoogte 40mm Nr. 0039 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Universal left-right toothed saw blade with 72 teeth suitable for sawing different types of wood, laminated materials, MDF, double-sided veneer boards or chipboards in stack. For panel sizing machines and table saws. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut.
Wall-mounted blast gate, diameter 100mm, for use in combination with the Air Flux dust extraction systems.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Set profielmessen hoogte 40mm Nr. 0003 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Sacs supplémentaires en PVC 120µm pour la poubelle de l'aspirateur Air Flux 3000CKH. Ces sacs sont approprié pour utilisation avec le poubelle.
The Itamac Eagle series are high-quality spindle moulding machines, specifically developed for professional routing applications. Designed with both functionality and comfort in mind, this machine has every possible function for a spindle moulder in this class. Equipped with an extra-heavy chassis, a solid cast-iron protective cover with aluminium guides and fine adjustment. The powerful 230V or 400V motor delivers 3HP and ensures that this table can handle almost any routing task. The Itamac Eagle HW300E has a 30 mm shaft. With the optionally available shaft and collets, the machine can also be used for profiling with the aid of router bits. The large cast iron table guarantees the necessary stability during work. Can be used at four speeds, with centralised control panel above the machine.
This model is equipped with a high-quality 1400 mm sliding system with flip-stop.
Carbide chain with widia teeth for mobile chain saw for aerated concrete MCS400.
Set of 4 indispensable PowerGrip tools for woodturning.
The chisels are equipped with replaceable carbide plaques that last longer, are super-sharp and do not require resharpening.
This is an ideal starter kit for anyone who wants to start woodturning.
The set is composed as follows: roughing gouge 11 mm - roughing gouge 11 mm radius 2" - round hollowing gouge 12 mm - detailing chisel 10 mm
Cette base mobile de Belmash est compatible avec les machines Universal 2000, SDM2500, SDMR2500 et SDR2200. Placez votre machine Belmash à une hauteur idéale et rendre mobile.
Ensemble complet de tubes et d'accessoires à monter au mur dans l'atelier. Ce kit mural est idéal pour les petits ateliers : avec un seul aspirateur, la poussière est évacuée de chaque machine.
Four part reducer up to diameter 100mm to be used with the different models of Air Flux Dust extractors.
Une machine compacte aux multiples possibilités
Grandes roues pivotantes, pour un fonctionnement régulier.
2.2KW 3 HP
2 vitesses Courroie en poly 10 000 et 8 000 tr/min
Tourner à gauche et à droite
Opération par le haut
Comprend une broche de 30 mm, une broche interchangeable de 20 mm et des douilles de serrage pour la défonceuse.
Châssis sur roues inclus
Un outil indispensable pour tout bricoleur. Un multi-outil avec lequel vous pouvez tout faire. Cette meuleuse d'angle (puissance 2300W) est parfaitement adaptée aux travaux de meulage lourds. Il est alimenté par le réseau électrique. La meuleuse d'angle peut être utilisée pour couper le métal, le bois et la pierre, mais vous pouvez également l'utiliser pour enlever la rouille et écailler le métal.
Ce chariot de transport auto-serrant est la solution pour transporter facilement des portes, des cadres, des panneaux, etc. dans le secteur du bâtiment et dans les ateliers. Il a une capacité de charge allant jusqu'à 200 kg. Lorsque le matériau est placé dans l'Easy Roller, il serre automatiquement le matériau lui-même en raison de son effet d'articulation. Ce qui était autrefois porté avec deux personnes ne peut désormais être fait qu'avec l'Easy Roller, ce qui évite une tension physique excessive sur le corps. L'Easy Roller a une couche de protection robuste pour éviter d'endommager le matériau à transporter.
Weight
1 kg
0,5 kg
7 kg
1 kg
0,05 kg
0,05 kg
0,05 kg
0,5 kg
ND
0,3 kg
2 kg
1 kg
0,05 kg
1 kg
0,5 kg
0,05 kg
0,05 kg
0,5 kg
250 kg
1 kg
ND
7 kg
2 kg
0,5 kg
200 kg
5 kg
4,5 kg
Dimensions
ND
34 × 18 cm
ND
ND
ND
ND
0,4 cm
ND
ND
15 × 15 cm
ND
ND
0,4 cm
ND
ND
ND
0,4 cm
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
Additional information
Poids
1 kg
Diamètre
128mm
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
2
Hauteur de rainure
30mm
Rayon
R3/6, R4/8, R5/10
RPM Min-Max
5900-9700
Poids
0,5 kg
Dimensions
34 × 18 cm
Diamètre
100mm
Poids
7 kg
Poids
1 kg
Poids
0,05 kg
Diamètre
24,7mm
Longeur de coupe
12mm
Longueur
51mm
Rayon
R6
Queue
8mm
Faces de coupe
2
Poids
0,05 kg
Diamètre
60mm, 100mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,5 kg
Diamètre
50mm, 100mm
Poids
0,3 kg
Dimensions
15 × 15 cm
Poids
2 kg
Poids
1 kg
Diamètre de l\' arbre
50 mm
Hauteur de rainure
30mm, 40mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1 kg
Diamètre lame de scie
280mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,2mm
Epaisseur lame de scie
2,2mm
nombre de dents
72
Poids
0,5 kg
Diamètre
100mm
Poids
0,05 kg
Diamètre
16,7mm
Longeur de coupe
8mm
Longueur
47mm
Rayon
R2
Queue
8mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,5 kg
Poids
250 kg
Moteur
3 CV
Voltage
230 V
Geleidingssysteem
1400 mm
Diamètre de l\' arbre
30 mm
Nominale snelheid
4.000rpm, 6.000rpm, 8.000rpm, 10.000rpm
Freesopening
38mm, 70mm, 100mm, 140mm
Hauteur de rainure
100mm
Table de travail
556x716mm, 220x716mm
Geleider
400x120mm
Connexion d\'extraction
100 mm
Hauteur du plan de travail
860mm
Chassis
590x530mm
Verstekgeleider
-60° – +60°
Poids
1 kg
Chaîne
Dents en carbure
Poids
7 kg
Poids
2 kg
Poids
0,5 kg
Poids
200 kg
Poids
5 kg
Puissance
2300W
vitesse
6500 rpm
Poids
4,5 kg
Capacité de charge
200 kg
Épaisseur max. de serrage
120 mm
Matériel
acier de 2,5 mm d'épaisseur, roues pneumatiques
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy