Lamelles par boîte 1000 pièces. Fabriqué à partir de bois européens de haute qualité. Grâce à sa structure extra absorbante.
De Kreg boormal voor potscharnieren is een speciale boormal voor het eenvoudig plaatsen van verdekte (keuken)kastscharnieren. Met deze boormal kunt u snel herhaaldelijk gaten boren voor potscharnieren (ook wel euroscharnieren genoemd). De boormal heeft een nauwkeurige positionering van het scharnier door middel van indexlabels.
Bij de mal wordt standaard een boor met een hardmetalen punt en een diameter van 35 mm geleverd.
Universeel links-rechts getand zaagblad met 24 tanden geschikt voor het verzagen van verschillende houtsoorten, gelamineerde materialen, dubbelzijdig fineerplaten of spaanplaten in stapel.
Uitverkoop
Ideaal voor het naslijpen van gebogen gereedschappen, gutsen, snij- en houtdraaigereedschappen. Convex en concaaf diamantoppervlak in één slijpgereedschap. Herslijpen van gereedschappen met een radius van min 1,6 tot max 25 mm. Inclusief anti-slip pad voor gemakkelijker gebruik. Geen olie nodig - droog of met water slijpen.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Extendable guide and support for use with Virutex' adjustable table MT58K. Ideal for cutting long pieces with great precision and stability. Rapid adjustment of the length by scales and stops graduated in millimetres. Foldable and easy to transport.
Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. The blades are specially sheared so you can work faster and splinter free.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container.
Attention: this hand gluer comes standard with a rubber roller, suitable for vinyl (white) adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T).
Belmash fixed groove cutter for both Belmash combination machines and spindle moulding machines. The groove cutter is used to produce rectangular grooves, to make quarters and to cut along the fibers in different types of wood. It can be used on woodworking machines BELMASH SDM2500, SDMR2500, CBS2400 or spindle moulders with shaft 30mm.
Available in different thicknesses.
Content
Lamelles par boîte 1000 pièces. Fabriqué à partir de bois européens de haute qualité. Grâce à sa structure extra absorbante.
De Kreg boormal voor potscharnieren is een speciale boormal voor het eenvoudig plaatsen van verdekte (keuken)kastscharnieren. De plaatsing van deze scharnieren vergt precisie, anders kijkt u jarenlang tegen scheefhangende (keuken)kastjes aan.
Met deze boormal kunt u snel herhaaldelijk gaten boren voor potscharnieren (ook wel euroscharnieren genoemd). De boormal heeft een nauwkeurige positionering van het scharnier door middel van indexlabels.
De potboor loopt in een schacht en het gat is dus altijd recht en de diepteaanslag zorgt ervoor dat altijd de gewenste diepte geboord wordt. 2 instelbare nokken zorgen voor de correcte offset van de scharnier.
Bij de mal wordt standaard een boor met een diameter van 35 mm geleverd.
Universeel links-rechts getand zaagblad met 24 tanden geschikt voor het verzagen van verschillende houtsoorten, gelamineerde materialen, MDF, dubbelzijdige fineerplaten of spaanplaten in stapel. Te gebruiken met paneelzagen of zaagtafels. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede.
Ideaal voor het naslijpen van gebogen gereedschappen, gutsen, snij- en houtdraaigereedschappen. Convex en concaaf diamantoppervlak in één slijpgereedschap. Herslijpen van gereedschappen met een radius van min 1,6 tot max 25 mm. Inclusief anti-slip pad voor gemakkelijker gebruik. Geen olie nodig - droog of met water slijpen.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. The router bit is solid carbide, with special micrograin finishing for best performance. Thanks to these combined qualities the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Extendable guide and stopper to use with Virutex' adjustable table MT58K. Ideal for cutting long pieces with great precision and stability. Rapid adjustment of the length by scales and stops graduated in millimetres. Foldable and easy to transport.
Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. The blades are specially sheared so you can work faster and splinter free.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. Simply press the trigger to run the glue over the roll. Using this trigger you will always obtain the right amount of glue for your project. Thanks to the support, the hand gluer can easily be put away. For cleaning, you can keep this adhesive under water without risk of damage.
Attention: this adhesive comes standard with a rubber roller, suitable for vinyl adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T).
Belmash fixed groove cutter for both Belmash combination machines and spindle moulding machines. The groove cutter is used to produce rectangular grooves, to make quarters and to cut along the fibers in different types of wood. It can be used on woodworking machines BELMASH SDM2500, SDMR2500, CBS2400 or spindle moulders with shaft 30mm.
Available in different thicknesses.
Weight
2 kg
1 kg
1 kg
2 kg
0,05 kg
5 kg
0,05 kg
0,05 kg
2 kg
ND
Dimensions
ND
ND
ND
ND
ND
ND
0,4 cm
ND
ND
ND
Additional information
Poids
2 kg
Type de lamelle
Nr. 20
Poids
1 kg
Poids
1 kg
Diamètre lame de scie
250mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,2mm
Epaisseur lame de scie
2,2mm
nombre de dents
24
Poids
2 kg
Poids
0,05 kg
Diamètre
3mm
Longeur de coupe
11mm
Longueur
51mm
Faces de coupe
2+1
Poids
5 kg
Verlenging 1
0-1360mm
Verlenging 2
1360-2250mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Diamètre
16mm
Longeur de coupe
16mm
Longueur
56mm
Faces de coupe
2
Poids
2 kg
Breedte lijmrol
122mm, 180mm
Inhoud lijmbak
1kg, 1,4kg
Poids
ND
Epaisseur dent
4,0mm, 6,0mm, 8,0mm, 10,0mm, 12,0mm
nombre de dents
6
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy