Inciseur 1 ch, disponible en option sur les machines combinées TT32K5SL, TT320K5 Massif et TT400K5 Massif.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDM2500.
Saw blade with 144 teeth
Saw blade with FZ/TR triple chip teeth for the cutting of sandwich panels. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth such as this blade calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Adjustable groove blade set with adjusting rings that can be used on all sawing machines from the Itamac Panthera series. Can also be used on other machines equipped for dado blades. Note: Only a few machines on the market can be used with adjustable grooving saw blades. The thickness is fully adjustable up to 20.6mm.
Mèche carbure ancre double à utiliser sur le rainureuse Virutex RA17VG. Cette fraise permet de fraiser les joints en silicone de type FS2 ou FS4.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
This pneumatic vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. On top of this, the top plate can be rotated 360°. The support must be secured with clamps (not included).
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling.
Deze verstelbare afschuinfrees met snijvlakken in hoogwaardig hardmetaal, geeft u een enorme flexibiliteit bij het maken van schuine kanten. De frees is aan beide zijden instelbaar tussen 0° en 70° met stappen van 1°. Gebruik de frees zowel voor het afschuinen van hout als plaatmateriaal. Dankzij de hardmetalen messen snijdt deze groeffrees moeiteloos door massieve platen, harde en zachte houtsoorten, MDF of gelamineerde platen.
Maximale freeshoogte bij 0° is 48mm, bij 70° is dit 15mm.
Set profielmessen hoogte 40mm Nr. 0062 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. The smaller bearing provides an upright standing side to the rounding. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Set profielmessen hoogte 40mm Nr. 0036 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Set profielmessen hoogte 50mm Nr. 2050 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Content
Cet inciseur 1 ch est disponible en option sur les machines combinées TT32K5SL, TT320K5 Massif et TT400K5 Massif.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDM2500.
Saw blade with 144 teeth
Saw blade with FZ/TR triple chip teeth for the cutting of sandwich panels. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth such as this blade calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Adjustable groove blade set with adjusting rings that can be used on all sawing machines from the Itamac Panthera series. Can also be used on other machines equipped for dado blades. Note: Only a few machines on the market can be used with adjustable grooving saw blades. The thickness is fully adjustable up to 20.6mm.
Mèche carbure ancre double à utiliser sur le rainureuse Virutex RA17VG. Cette fraise permet de fraiser les joints en silicone de type FS2 ou FS4.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
This pneumatic vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. On top of this, the top plate can be rotated 360°. The support must be secured with clamps (not included). Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, the optional SVN470 auxiliary support is available. This support is specifically designed to connect to the SVN450 or SVN460 model. Using a distribution block, you can connect up to 4 supports at the same time. In this way you can operate them synchronously. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling.
Deze verstelbare afschuinfrees met snijvlakken in hoogwaardig hardmetaal, geeft u een enorme flexibiliteit bij het maken van schuine kanten. De frees is aan beide zijden instelbaar tussen 0° en 70° met stappen van 1°. Gebruik de frees zowel voor het afschuinen van hout als plaatmateriaal. Dankzij de hardmetalen messen snijdt deze groeffrees moeiteloos door massieve platen, harde en zachte houtsoorten, MDF of gelamineerde platen.
Maximale freeshoogte bij 0° is 48mm, bij 70° is dit 15mm.
Set profielmessen hoogte 40mm Nr. 0062 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. The smaller bearing provides an upright standing side to the rounding. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Set profielmessen hoogte 40mm Nr. 0036 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Set profielmessen hoogte 50mm Nr. 2050 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Weight
10 kg
3 kg
1 kg
0,05 kg
1 kg
0,05 kg
0,05 kg
1 kg
1 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
Dimensions
ND
30 × 26 × 7 cm
ND
ND
ND
ND
ND
ND
ND
0,4 cm
ND
0,4 cm
ND
0,5 cm
Additional information
Poids
10 kg
Diamètre lame de scie
150mm
Moteur
1 PK
Poids
3 kg
Dimensions
30 × 26 × 7 cm
Max. hoogte werkstuk
63mm
Max. breedte werkstuk
270mm
Poids
1 kg
Diamètre lame de scie
600mm
Diamètre de l\' arbre
40mm
Epaisseur dent
4,2mm
Epaisseur lame de scie
3,6mm
nombre de dents
144
Poids
0,05 kg
Diamètre
28,6mm
Longeur de coupe
13mm
Longueur
51mm
Rayon
R8
Queue
8mm
Faces de coupe
2
Poids
1 kg
Diamètre lame de scie
200mm
Epaisseur lame de scie
20,6mm
Diamètre de l\' arbre
15,875 mm
Poids
0,05 kg
Poids
0,05 kg
Diamètre
8mm
Longeur de coupe
25mm
Longueur
70mm
Queue
12mm
Faces de coupe
2
Poids
1 kg
Afmetingen werkvlak
150x150mm
Force de fixation
800gr/cm² à 6 bar
Werkdruk
5,5-7 bar
Luchtverbruik bij 5,5 bar
28l/min
Poids
1 kg
Diamètre
170mm
Diamètre de l\' arbre
50 mm
Faces de coupe
2
Hauteur de rainure
50mm
RPM Min-Max
4700-7000
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Diamètre
22,7mm
Longeur de coupe
12mm
Longueur
51mm
Rayon
R5
Queue
8mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,05 kg
Diamètre
12mm
Longeur de coupe
25mm
Longueur
70mm
Queue
12mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,5 cm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy