Top table à utiliser sur la base mobile Belmash. En utilisant la top table, la machine peut être placée séparément sur la base mobile afin que vous puissiez facilement l'emporter avec vous dans la voiture. La top table peut être utilisée en combinaison avec la base mobile PK2 et est suffisamment grande pour accueillir les modèles Universal 2000, SDM2500, SDMR2500 ou SDR2200.
Bandsaw blade with length 2240mm for use on the TT312 band saw machine from Tendotools. This saw blade has 6 TPI (teeth per inch) and has a width of 6mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
Forstner drill bit with cylindrical shank for boring hinges with the best quality on every kind of wood or panels. This high quality hinge boring bit has two Tungsten cutting edges, two Tungsten spurs and a HW center point for boring with the best quality on every kind of wood or panels. Right hand boring only
This extension can be placed on the left or right side of the Virutex table MT58K. Work easily with longer pieces on your table.
Guide rail or jig for circles and ovals with maximum diameter and main axis 3200mm. This compass is ideal for making mirrors, windows, doors, or any other creation with a circular or elliptical shape. To mill out an elliptical shape, use both swivel supports and elongated guides. By using just one of the two swivel supports you can mill perfect circles. Place the support exactly in the centre of the mould to make circles.
The guide rail is equipped with two powerful suction cups to attach to your panels without damage. If it is not possible to use the suction cups (e.g. on porous materials), the mould is provided with holes to screw them on. Standard delivery with two rods (Ø8mm) to attach the router to the guide.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
The BOW FeatherPRO featherboard features an innovative use of high-density EVA Foam / foam combs and clamping system that increase control of insertion, dramatically improve recoil and protects your wood better from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. Ideal for table saws, routers, guides
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 50mm Nr. 2072 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Fraise à rainurer à lames réversibles et précouteaux en carbure de haute qualité (HW) pour réaliser des rainures de précision. Réglable progressivement en hauteur entre 28mm et 55mm. Grâce aux lames en carbure de tungstène, cette fraise à rainurer coupe sans effort les planches massives, les bois durs et tendres, le MDF ou les planches laminées.
Disponible avec un alésage de 30 mm ou 50 mm.
Set profielmessen hoogte 40mm Nr. 0017 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Content
Top table à utiliser sur la base mobile Belmash. En utilisant la top table, la machine peut être placée séparément sur la base mobile afin que vous puissiez facilement l'emporter avec vous dans la voiture. La top table peut être utilisée en combinaison avec la base mobile PK2 et est suffisamment grande pour accueillir les modèles Universal 2000, SDM2500, SDMR2500 ou SDR2200. Fabriqué en métal avec un bord relevé. Il peut être installé sur une base mobile avec bord relevé vers le bas ou vers le haut.
Bandsaw blade with length 2240mm for use on the TT312 band saw machine from Tendotools. This saw blade has 6 TPI (teeth per inch) and has a width of 6mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
Forstner drill bit with cylindrical shank for boring hinges with the best quality on every kind of wood or panels. This high quality hinge boring bit has two Tungsten cutting edges, two Tungsten spurs and a HW center point for boring with the best quality on every kind of wood or panels. Right hand boring only
This extension can be placed on the left or right side of the Virutex table MT58K. Work easily with longer pieces on your table.
Guide rail or jig for circles and ovals with maximum diameter and main axis 3200mm. This compass is ideal for making mirrors, windows, doors, or any other creation with a circular or elliptical shape. To mill out an elliptical shape, use both swivel supports and elongated guides. By using just one of the two swivel supports you can mill perfect circles. Place the support exactly in the centre of the mould to make circles.
The guide rail is equipped with two powerful suction cups to attach to your panels without damage. If it is not possible to use the suction cups (e.g. on porous materials), the mould is provided with holes to screw them on. Standard delivery with two rods (Ø8mm) to attach the router to the guide.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
The BOW FeatherPRO featherboard features an innovative use of high-density EVA Foam / foam combs and clamping system that increase control of insertion, dramatically improve recoil and protects your wood better from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. Ideal for table saws, routers, guides
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 50mm Nr. 2072 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Fraise à rainurer à lames réversibles et précouteaux en carbure de haute qualité (HW) pour réaliser des rainures de précision. Réglable progressivement en hauteur entre 28mm et 55mm. Grâce aux lames en carbure de tungstène, cette fraise à rainurer coupe sans effort les planches massives, les bois durs et tendres, le MDF ou les planches laminées.
Disponible avec un alésage de 30 mm ou 50 mm.
Set profielmessen hoogte 40mm Nr. 0017 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Weight
5,75 kg
0,5 kg
0,05 kg
1 kg
3 kg
0,05 kg
0,05 kg
1 kg
0,05 kg
0,05 kg
1 kg
0,05 kg
Dimensions
625 × 360 × 27 cm
ND
ND
ND
ND
ND
ND
ND
ND
0,5 cm
ND
0,4 cm
Additional information
Poids
5,75 kg
Dimensions
625 × 360 × 27 cm
Poids
0,5 kg
Longueur
2240mm
Largeur
6mm
Dikte
0,65mm
Poids
0,05 kg
Diamètre
32mm
Longueur
90mm
Queue
10x60mm
Poids
1 kg
Poids
3 kg
Minimum kleine as (ellips)
600mm
Maximum grote as (ellips)
3200mm
Minimum diameter (cirkel)
600mm
Maximum diameter (cirkel)
3200mm
Poids
0,05 kg
Diamètre
21mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2
Poids
0,05 kg
Diamètre
12mm
Longeur de coupe
19mm, 25mm
Longueur
51mm, 57mm
Faces de coupe
2+1
Poids
1 kg
Poids
0,05 kg
Diamètre
25mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2
Poids
0,05 kg
Dimensions
0,5 cm
Poids
1 kg
Diamètre
160mm
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
4
nombre de dents
4
Longeur de coupe
44mm
Hauteur de rainure
28-55mm
RPM Min-Max
4800-8200
Poids
0,05 kg
Dimensions
0,4 cm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy