Sac filtrant supplémentaire pour protéger le filtre de l'Air Flux Dusty AF-1100/45. Facile à remplacer.
LAATSTE MODEL!
Deze steun met kogels beschikt over 13 kogels en heeft een afmeting van 45 cm x 28 cm.
De hoogte is instelbaar van 64 cm tot 108 cm.
Set profielmessen hoogte 40mm Nr. 0100 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
SHOWROOM MODEL - ONGEBRUIKT
Deze stofafzuiging is uitgerust met dezelfde collector en inductiemotor als het populaire model Airflux Dusty AF-1020. Dankzij de compacte en mobiele basis op wielen, en de robuuste handgreep, is deze machine ook draagbaar. De Airflux Dusty 950AF stofafzuiging is dan ook heel populair in kleine werkplaatsen en kan met behulp van beugels zelfs worden opgehangen aan de muur. Hiervoor zijn handige positiegaten voorzien in de basis van de machine. De stofzuiger is voorzien van een stalen propeller en een inductiemotor die 30% meer capaciteit heeft en 40% stiller is dan een koolborstelmotor.
Set profielmessen hoogte 40mm Nr. 0032 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
LAST MODEL!
This support with balls features 13 balls and measures 45 cm x 28 cm.
The height is adjustable from 64 cm to 108 cm.
Sacs supplémentaires en PVC 120µm pour la poubelle de l'aspirateur Air Flux 3000CKH. Ces sacs sont approprié pour utilisation avec le poubelle.
Replacement dust bag for the Air Flux Dusty AF950 dust extractor, in cotton.
Lame de scie avec 28 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
These galvanized spring steel holders mount to the wall in seconds and are a perfect home for tools or accessories with a diameter of 10 cm, such as the new Air Flux accessories. Fitting connectors, flexible extraction hose and other tools with a Ø 100 mm fit perfectly here.
Affleureuse légère avec un moteur puissant, adaptée à une large gamme d'applications. Peut être utilisé pour les rainures droites ou rondes, le fraisage de profils sur le bois ou le stratifié et le fraisage de petits gabarits (par exemple pour placer des charnières). La machine peut être transformée en un petit défonceuse sans accessoires supplémentaires.
Livraison standard avec une fraise combinée (chanfrein et dressage) au carbure. Equipé d'un capot transparent. En plus du contrôle électronique de la vitesse, le FR192VG dispose d'un système de contrôle de la vitesse qui maintient la vitesse. De cette manière, une vitesse constante est toujours garantie, quel que soit l'effort de la machine.
Modèle de salle d'expo
La Timber Boy TT315 est une scie de table puissante avec un moteur à induction de 2,6 ch et une lame en carbure de tungstène, qui est équipée d'un guide d'onglet et d'une table de travail galvanisée.
Showroommodel
Heavy duty massif beech workbench with a surface of 120mm thickness. The ideal workbench for the professional woodworker or for your workplace at home. The workbench is equipped as standard with two Bench11 cast iron vices with the possibility to install a third one (Bench 11Q). The entire workbench is already oiled upon delivery. The package includes a pair of professional dural bench dogs (Ø19mm). Fixed working height of 900mm. Tailor-made storage cabinets for mounting in the underframe available separately.
Itamac helps invest in your health: You will receive a 30% discount on the Orca S-17 overarm dust extractor for efficient dust extraction and better health with the purchase of any Panthera table saw!
The Itamac Panthera series offers high-quality and safe table saws for precise cuts. The HW110SE series features a powerful poly-belt drive system and a heavy-duty dovetail motor housing, ensuring a vibration-free and accurate saw table. The Panthera series is available in 230V-3PK (S7 model), three-phase 400V-5.5PK and even a single-phase 230V-4PK (S9 model). Itamac is the only manufacturer to offer this type of single-phase table saw with a 4 HP motor. The standardised T-slots enable precise cuts with the supplied mitre gauge.
Delivered standard with "BOW" Feather PRO featherboard that increase control and reduce kickback as well as high-quality saw blades by Sistemi Klein (made in Italy) for stability, reduced vibration and longer life.
SEE MORE INFORMATION IN THE FULL DESCRIPTION BELOW
Manchon à poncer 35 x 140 mm pour ponceuse à rouleau TT140
Showroommodel
De houtversnipperaar van BrennHolz wordt aangedreven door een krachtige Honda-motor van 6,5pk. Dit maakt de hakselaar uitermate geschikt voor het grove werk. De sterke motor is geschikt voor gebruik in de bouw, ontbossing en agricultuur. Het werd uitgerust met twee grote messen en acht zogenoemde hamertjes (tien messen in totaal). De grote messen versnijden uw afval in kleine deeltjes, de hamertjes zorgen er op hun beurt voor dat dit afval verder verwerkt wordt tot compost. Na deze bewerking is uw afval uitermate geschikt als meststof voor allerlei toepassingen. De aandrijving wordt gereguleerd door een aandrijfriem, waardoor plotse schokken perfect opgevangen kunnen worden. Bovendien worden er twee verwisselbare bladeren meegeleverd. Al deze eigenschappen bij elkaar, maken dit unieke product een te duchten concurrent voor hakselaars uit een hogere prijsklasse.
Promotional package of panel saw Sliding TT1250X including dust collector, extraction hose, clamping bands and set of three saw blades. This compact panel saw from the Hobby+ series with 230V induction motor (2HP) is a very popular machine and the ideal entry-level model. This model of panel saw has a heavy-duty cast iron worktable that provides very good flatness. The high-quality prismatic sliding system has a total cutting length of 1250 mm.
Replacement filter bags for covering the filter of the Air Flux Dusty AF-1100/45 Dust Extractor. Easy to replace.
Set profielmessen hoogte 50mm Nr. 2010 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
This pneumatic vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications.
Using the rubber seals included as standard, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling.
A nailing and stapling machine that can be adjusted by means of electronic control. Thanks to the ergonomic, well-balanced housing, this powerful tool is a handy helper during your jobs. Both staples (6 -14mm) and nails (max 16cm) can be placed with this device. There is a double safety switch on the device. The charger has a capacity of 83.
Caoutchouc de rechange pour pompe à ventouse. Convient à la pompe de toutes les ventouses PIHER.
This easy-to-handle chisel is used to reduce the rough workpiece.
This transport handle is standard equipped with a clamp which makes this handle suitable for multiple functions. Can be used as an edge press, corner press or transport handle. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. As an edge press you can use the PC81U on straight panels as well as concave or convex panels. As a corner press, this handle becomes the ideal tool for making frames, for example. The clamp is detachable and by changing the position of the handle, the PC81U can easily be converted into a transport handle. Suitable for panels between 0mm and 46mm thick.
Content
Sac filtrant supplémentaire pour protéger le filtre de l'Air Flux Dusty AF-1100/45. Facile à remplacer.
LAATSTE MODEL!
Deze steun met kogels beschikt over 13 kogels en heeft een afmeting van 45 cm x 28 cm.
De hoogte is instelbaar van 64 cm tot 108 cm.
Set profielmessen hoogte 40mm Nr. 0100 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Deze stofafzuiging is uitgerust met dezelfde collector en inductiemotor als het populaire model Airflux Dusty AF-1020. Dankzij de compacte en mobiele basis op wielen, en de robuuste handgreep, is deze machine ook draagbaar. De Airflux Dusty 950AF stofafzuiging is dan ook heel populair in kleine werkplaatsen en kan met behulp van beugels zelfs worden opgehangen aan de muur. Hiervoor zijn handige positiegaten voorzien in de basis van de machine. De stofzuiger is voorzien van een stalen propeller en een inductiemotor die 30% meer capaciteit heeft en 40% stiller is dan een koolborstelmotor.
Set profielmessen hoogte 40mm Nr. 0032 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
LAST MODEL!
This support with balls features 13 balls and measures 45 cm x 28 cm.
The height is adjustable from 64 cm to 108 cm.
Sacs supplémentaires en PVC 120µm pour la poubelle de l'aspirateur Air Flux 3000CKH. Ces sacs sont approprié pour utilisation avec le poubelle.
Replacement dust bag for the Air Flux Dusty AF950 dust extractor, in cotton.
Lame de scie avec 28 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
These galvanized spring steel holders mount to the wall in seconds and are a perfect home for tools or accessories with a diameter of 10 cm, such as the new Air Flux accessories. Fitting connectors, flexible extraction hose and other tools with a Ø 100 mm fit perfectly here.
Affleureuse légère avec un moteur puissant, adaptée à une large gamme d'applications. Grâce à son fonctionnement confortable et à sa grande efficacité, cette affleureuse offre une excellente qualité. Convient pour le fraisage de profilés sur le bois ainsi que sur tous les types de stratifiés. L'affleureuse FR192VG est également idéale pour fraiser de petits gabarits avec une grande précision. Par exemple, faites rapidement et facilement des trous pour adapter les charnières en utilisant les modèles spéciaux de Virutex. Enfin, vous pouvez aussi facilement fraiser des rainures rondes ou droites à l'aide des attaches.
Réglage précis et simple de la hauteur à l'aide d'un bouton rotatif. La machine peut être transformée en un petit défonceuse sans accessoires supplémentaires. Livraison standard avec une fraise combinée (chanfrein et dressage) au carbure. Grâce à son puissant moteur, vous pouvez également, en option, fraiser des rabais sur vos fenêtres ou vos portes. Equipé d'un capot transparent. En plus du contrôle électronique de la vitesse, le FR192VG dispose d'un système de contrôle de la vitesse qui maintient la vitesse. De cette manière, une vitesse constante est toujours garantie, quel que soit l'effort de la machine.
La Timber Boy TT315 est une scie de table puissante avec un puissant moteur à induction de 2,6 ch. Elle est équipée d'un guide d'onglet à serrage excentrique et d'une table de travail galvanisée. Il est fourni en série avec une table d'extension (également galvanisée), des poignées et des roues, ce qui la rend idéale pour une utilisation extérieure prolongée. La lame en carbure de tungstène a un diamètre de 315 mm et un alésage de 30 mm et peut être inclinée de 45° à l'aide de la commande pratique.
Les pieds du châssis peuvent être repliés en un rien de temps, de sorte que la machine peut être transportée facilement dans une voiture particulière.
Heavy duty massif beech workbench with a surface of 120mm thickness. The ideal workbench for the professional woodworker or for your workplace at home. The workbench is equipped as standard with two Bench11 cast iron vices with the possibility to install a third one (Bench 11Q). The entire workbench is already oiled upon delivery. The package includes a pair of professional dural bench dogs (Ø19mm). Fixed working height of 900mm. Tailor-made storage cabinets for mounting in the underframe available separately.
Itamac Panthera Series
The Harvest-group's HW110SE table saws have proven themselves for years as one of the highest quality saw tables in the world. These table saws exceed all expectations in terms of user-friendliness, safety and appearance. The precision-ground cast iron worktables, heavy duty dovetailed motor housing and powerful poly-belt drive system make the HW110SE series a low-vibration machine that lets you cut more precisely than ever before!
Safety and precision
Itamac uses high-quality and very powerful, noiseless induction motors for all their ranges. The Panthera S7 series is available in 230V - 3HP, while the Panthera S9 series is available in both three-phase 400V - 5.5HP and single-phase 230V - 4HP. Itamac stands out as the only manufacturer offering this type of saw table on single phase with a powerful 4 HP motor. This ensures you have enough power to cut through material effortlessly, no matter which series you choose.
Safety and precision are guaranteed with the Itamac Panthera series. The table saws feature standardised T-slots to the left and right of the saw blade where you can work very precisely with the supplied mitre guide with stop and adjustable positions. For clean work and optimum safety, the Panthera series includes the "BOW" Feather PRO featherboard as standard: a featherboard with replaceable springs in EVA foam that increases input control, drastically reduces kickback and better protects your wood from damage.
But, even the best cordless screwdriver needs the right screwdriver bit:
That is why Panthera saw tables come standard with very high-quality saw blades: one rip Itamac saw blade and one precision finishing saw blade Xtra Cut by Sistemi Klein, Made in Italy. These saw blades take cutting to a new level due to the special synthetic resin filled in the slots, which provides unprecedented stability and reduces vibration. This saw blade is ideally suited for cutting hardwood, double-sided veneer, laminate, MDF and thermoplastic boards. It is even ideal for cutting ALUCOBOND® or DIBOND®. These saw blades are equipped with carbide teeth from the original Ceratizit micrograin carbide, resulting in a lifetime that is up to 30% longer.
Dust collection and your health
Dust collection and your health also play an important role. On saw tables with quick-change or removal of the riving knife for groove cuts/working with dado saw blades, most of the dust is released above the worktable. Without a riving knife, there is no possibility of fitting a dust guard. Itamac has therefore developed the overarm floating dusthood "ORCA S-17". The transparent guard is easily adjustable in height and has a Ø 100 mm connection for efficient extraction. This large connection ensures optimum suction without loss of air speed, unlike all other small-diameter protective caps. Also, the large transparent surfaces of the protective cover ensure that you always have a full view of your workpiece, allowing you to work more safely and precisely compared to a small protective cover that often obstructs work.
ITAMAC helps invest in your health:
Although these saw tables are often operated without a riving, it is still very important to take dust collection seriously. Precisely for this reason, ITAMAC is offering a 30% discount on the Orca S-17 overarm floating dusthood when purchasing any Panthera saw table. It is important to realise that wood dust can be just as harmful as other types of dust, so proper dust extraction is vital for a safe and healthy working environment.
The saw table insert is designed for use at any cutting angle and can be easily removed thanks to the magnetic attachment in the table. Through fine adjustment, this plate can also be adjusted for a 100% flat transition with the cast-iron table top.
The saw blade can be tilted from 45° to -3° for false mitres and also tilts to the left for better visibility and no chance of kickback due to workpiece blocking. The table saw also has a quick-change riving knife system and is suitable for use with Dado groove saws (adjustable groove saw blades for cutting grooves up to +20 mm).
Operating the saw table is simple and user-friendly. The handwheels are full metal and heavy duty, and the industrial transmission ensures smooth operation of both saw height and blade tilt. Height and tilting adjustments are twice as fast as with a conventional system.
The Master-Rip fence is equipped with Teflon guide points, allowing it to guide very smoothly and can be adjusted at 6 points. In addition, the fence can be positioned either to the left or right of the saw blade. The fence can be easily locked by pushing the lever down, and the heavy-duty T-profile ensures a firm full-length lock. Cutting width can be clearly read on the double magnification scales in both millimetres and inches.
Manchon à poncer 35 x 140 mm pour ponceuse à rouleau TT140
Disponible en grain 80 - 100 - 120
Vendu par 3 pièces
De houtversnipperaar van BrennHolz wordt aangedreven door een krachtige Honda-motor van 6,5pk. Dit maakt de hakselaar uitermate geschikt voor het grove werk. De sterke motor is geschikt voor gebruik in de bouw, ontbossing en agricultuur. Het werd uitgerust met twee grote messen en acht zogenoemde hamertjes (tien messen in totaal). De grote messen versnijden uw afval in kleine deeltjes, de hamertjes zorgen er op hun beurt voor dat dit afval verder verwerkt wordt tot compost. Na deze bewerking is uw afval uitermate geschikt als meststof voor allerlei toepassingen. De aandrijving wordt gereguleerd door een aandrijfriem, waardoor plotse schokken perfect opgevangen kunnen worden. Bovendien worden er twee verwisselbare bladeren meegeleverd. Al deze eigenschappen bij elkaar, maken dit unieke product een te duchten concurrent voor hakselaars uit een hogere prijsklasse.
Promotional package of panel saw Sliding TT1250X including dust collector, extraction hose, clamping bands and set of three saw blades. This compact panel saw from the Hobby+ series with 230V induction motor (2HP) is a very popular machine and the ideal entry-level model. This model of panel saw has a heavy-duty cast iron worktable that provides very good flatness. The high-quality prismatic sliding system has a total cutting length of 1250 mm.
Replacement filter bags for covering the filter of the Air Flux Dusty AF-1100/45 Dust Extractor. Easy to replace.
Set profielmessen hoogte 50mm Nr. 2010 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
This pneumatic vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The table itself must be fixed with screws in the provided holes. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, you can use multiple modules to prevent sagging. The optional distributor (ref. 5046350) allows you to connect up to five basic pneumatic modules at the same time. In this way you can operate them synchronously. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling.
A nailing and stapling machine that can be adjusted by means of electronic control. Thanks to the ergonomic, well-balanced housing, this powerful tool is a handy helper during your jobs. Both staples (6 -14mm) and nails (max 16cm) can be placed with this device. There is a double safety switch on the device. The charger has a capacity of 83.
Caoutchouc de rechange pour pompe à ventouse. Convient à la pompe de toutes les ventouses PIHER.
This easy-to-handle chisel is used to reduce the rough workpiece. This is the first tool you use to obtain a round shape.
This transport handle is standard equipped with a clamp which makes this handle suitable for multiple functions. Can be used as an edge press, corner press or transport handle. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. As an edge press you can use the PC81U on straight panels as well as concave or convex panels. As a corner press, this handle becomes the ideal tool for making frames, for example. The clamp is detachable and by changing the position of the handle, the PC81U can easily be converted into a transport handle. Suitable for panels between 0mm and 46mm thick.
Weight
1 kg
10 kg
0,05 kg
13 kg
0,05 kg
10 kg
0,5 kg
0,5 kg
1 kg
1 kg
0,2 kg
1,8 kg
48 kg
184 kg
180 kg
0,05 kg
86 kg
350 kg
1 kg
0,05 kg
0,325 kg
1,1 kg
0,01 kg
ND
0,65 kg
Dimensions
ND
ND
0,4 cm
45 × 40 × 33,5 cm
0,4 cm
ND
ND
ND
ND
ND
ND
ND
940 × 660 × 470 cm
215 × 79 × 90 cm
ND
ND
ND
ND
ND
0,5 cm
16 × 20 × 2,2 cm
ND
ND
ND
ND
Additional information
Poids
1 kg
Poids
10 kg
Diameter kogels
25 mm
Aantal kogels
63 (9 x 7)
Max. draagkracht
200 kg
Hauteur
650-1100 mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
13 kg
Dimensions
45 × 40 × 33,5 cm
Moteur
1 PK
Voltage
230 V
Sortie
100mm
Air Speed
930m³/h
Ventilateur
230mm
Niveau sonore
85dB
Poids
0,05 kg
Dimensions
0,4 cm
Poids
10 kg
Diameter kogels
25 mm
Aantal kogels
63 (9 x 7)
Max. draagkracht
200 kg
Hauteur
650-1100 mm
Poids
0,5 kg
Poids
0,5 kg
Poids
1 kg
Diamètre lame de scie
400mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,5mm
nombre de dents
28
Poids
1 kg
Diamètre lame de scie
450mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
2,2mm
nombre de dents
56
Poids
0,2 kg
Diamètre
100mm
Poids
1,8 kg
Puissance
1000W
Diamètre max de fraise
25mm
Vitesse à vide
14000-30000rpm
Pince
6mm
Poids
48 kg
Dimensions
940 × 660 × 470 cm
Alésage
30 mm
Diamètre lame de scie
315mm
Profondeur de coupe 45°
50mm
Profondeur de coupe 90 °
90 mm
Moteur
2.6 CV
Table de travail
550 x 800 mm
Table de rallonge
450 x 810 mm
Inclinaison
45°
Poids
184 kg
Dimensions
215 × 79 × 90 cm
Hauteur du plan de travail
900mm
Poids
180 kg
Hauteur du plan de travail
875mm
Table de travail
1321 x 686 mm
Poids
0,05 kg
Grain
K80, K100, K120
Poids
86 kg
Aandrijving
benzine – Honda motor
Puissance
6.5 PK
aantal messen
10
max invoer
6 cm
Poids
350 kg
Poids
1 kg
Poids
0,05 kg
Dimensions
0,5 cm
Poids
0,325 kg
Dimensions
16 × 20 × 2,2 cm
Afmetingen werkvlak
150x150mm
Force de fixation
800gr/cm² à 6 bar
Werkdruk
5,5-7 bar
Luchtverbruik bij 5,5 bar
28l/min
Poids
1,1 kg
Poids
0,01 kg
Pour les articles
30100, 30110, 30131, 30132
Largeur de la lame
19 mm
Profondeur de la lame
10 mm
Longueur utile de la lame
160 mm
Poids
0,65 kg
Max. Draagkracht
70kg
Paneeldikte
0-46mm
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy
But, even the best cordless screwdriver needs the right screwdriver bit:
That is why Panthera saw tables come standard with very high-quality saw blades: one rip Itamac saw blade and one precision finishing saw blade Xtra Cut by Sistemi Klein, Made in Italy. These saw blades take cutting to a new level due to the special synthetic resin filled in the slots, which provides unprecedented stability and reduces vibration. This saw blade is ideally suited for cutting hardwood, double-sided veneer, laminate, MDF and thermoplastic boards. It is even ideal for cutting ALUCOBOND® or DIBOND®. These saw blades are equipped with carbide teeth from the original Ceratizit micrograin carbide, resulting in a lifetime that is up to 30% longer.
Dust collection and your health
Dust collection and your health also play an important role. On saw tables with quick-change or removal of the riving knife for groove cuts/working with dado saw blades, most of the dust is released above the worktable. Without a riving knife, there is no possibility of fitting a dust guard. Itamac has therefore developed the overarm floating dusthood "ORCA S-17". The transparent guard is easily adjustable in height and has a Ø 100 mm connection for efficient extraction. This large connection ensures optimum suction without loss of air speed, unlike all other small-diameter protective caps. Also, the large transparent surfaces of the protective cover ensure that you always have a full view of your workpiece, allowing you to work more safely and precisely compared to a small protective cover that often obstructs work.
ITAMAC helps invest in your health:
Although these saw tables are often operated without a riving, it is still very important to take dust collection seriously. Precisely for this reason, ITAMAC is offering a 30% discount on the Orca S-17 overarm floating dusthood when purchasing any Panthera saw table. It is important to realise that wood dust can be just as harmful as other types of dust, so proper dust extraction is vital for a safe and healthy working environment.
The saw table insert is designed for use at any cutting angle and can be easily removed thanks to the magnetic attachment in the table. Through fine adjustment, this plate can also be adjusted for a 100% flat transition with the cast-iron table top.
The saw blade can be tilted from 45° to -3° for false mitres and also tilts to the left for better visibility and no chance of kickback due to workpiece blocking. The table saw also has a quick-change riving knife system and is suitable for use with Dado groove saws (adjustable groove saw blades for cutting grooves up to +20 mm).
Operating the saw table is simple and user-friendly. The handwheels are full metal and heavy duty, and the industrial transmission ensures smooth operation of both saw height and blade tilt. Height and tilting adjustments are twice as fast as with a conventional system.
The Master-Rip fence is equipped with Teflon guide points, allowing it to guide very smoothly and can be adjusted at 6 points. In addition, the fence can be positioned either to the left or right of the saw blade. The fence can be easily locked by pushing the lever down, and the heavy-duty T-profile ensures a firm full-length lock. Cutting width can be clearly read on the double magnification scales in both millimetres and inches.
