NIEUW - UITVERKOOP
Met deze zwaluwstaartmal freest u makkelijk de mooiste houtverbindingen tot 600 mm breedte. Standaard geleverd met stelplaat halverzonken 12,7 mm en frees met volg lager.
SHOWROOM MODEL
Standing wood splitter for two-hand operation. This powerful wood cleaver is perfect for semi-professional or home use. With the help of this splitting machine you can easily split wood pieces up to 1000mm in length (if extension 3GRLAKR is used) and 450mm in diameter. The table can be adjusted to three heights 520mm - 900mm or 1300mm. In terms of performance, this model is identical to the TT1350/12T with the difference that this model is equipped with a 6.5 HP gasoline engine (Briggs & Stratton). Up to 11 tons of pressure. Thanks to its compact design, this cleaver is easy to store or move. Easily movable thanks to the rubber tires.
This presentation box contains 4 square hole drill bits for drilling square holes and rectangular grooves in softwood and hardwood.
This spacer ring is designed for the use of the narrow nylon brush on the Durotec structuring/brushing machine. Narrow brushes are the ideal solution for hard-to-reach areas.
Saw blade with 24 teeth
Saw blade with flat teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Made in Germany, take advantage of the extremely solid German quality.
Saw blade with 32 teeth
Construction saw blade with 'flat angle' teeth and a wide back for improved support of the tooth. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for use on pallet wood or wood with remnants of nails,... Thanks to the wide back, the teeth are less likely to be damaged if you hit nails or other debris in the wood during sawing. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
Vous pouvez attacher cet accessoire au GuidePRO afin de pouvoir fixer le GuidePRO dans votre verrou d'onglet. Idéal pour les coupes répétitives et cohérentes. Le GuidePRO est livré avec un connecteur coulissant Mitre et est conçu pour des configurations rapides et offre d'excellents avantages d'alimentation pour les coupes de scie à ruban. Certains utilisateurs de GuidePRO souhaitent bénéficier des avantages de GuidePRO, mais en tant qu'outil à position fixe. La barre d'ancrage GuidePRO verrouille le GuidePRO solidement en place, de sorte que vous n'avez pas à déplacer l'outil à chaque coupe.
La barre d'ancrage GuidePRO étend l'utilisation du GuidePRO à la table de toupie et à la scie circulaire à table.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container.
Attention: this hand gluer comes standard with a rubber roller, suitable for vinyl (white) adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T).
Set profielmessen hoogte 40mm Nr. 0092 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Helical planing and routing cutterhead with reversible knives in high quality carbide (HW). This cutter head is developped for finishing, planing or calibrating on moulding machines. Optionally you can use a mold and run-up ring to make curved workpieces. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm. The heads can be fitted with spurs on one or both sides on demand.
Le TT60/9 est un lit à rouleaux avec 9 rouleaux sur roulements à billes.
Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Cette presseur peut être utilisé sur le Belmash SDR2200.
Adapter ring to reduce the bore of your saw blade to comply with your machine. Make sure every saw blade is compatible with your own machine thanks to these convenient reduction rings.
Reduction from bore 40mm to 32mm.
The length of this bit is 115mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers.
SHOWROOM MODEL - NEW
The CPL 200 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 200 is the perfect partner for every carpenter on a construction site.
Flat feet for use on the PIHER clamps Mod. POT.
Made from steel
Content
NIEUW - UITVERKOOP
Met deze zwaluwstaartmal freest u makkelijk de mooiste houtverbindingen tot 600 mm breedte. Standaard geleverd met stelplaat halverzonken 12,7 mm en frees met volg lager.
Standing wood splitter for two-hand operation. This powerful wood cleaver is perfect for semi-professional or home use. With the help of this splitting machine you can easily split wood pieces up to 1000mm in length (if extension 3GRLAKR is used) and 450mm in diameter. The table can be adjusted to three heights 520mm - 900mm or 1300mm. In terms of performance, this model is identical to the TT1350/12T with the difference that this model is equipped with a 6.5 HP gasoline engine (Briggs & Stratton). With the help of this engine, this log splitter delivers a force of up to 11 tons! This makes the cleaver suitable for splitting several types of wood. Thanks to its compact design, this cleaver is easy to store or move. Easily movable thanks to the rubber tires.
This presentation box contains 4 square hole drill bits for drilling square holes and rectangular grooves in softwood and hardwood.
The drills have a shank with a 15.9 mm diameter, a cutting length of 70 mm and a diameter of 6, 8, 10 and 12 mm respectively.
This spacer ring is designed for the use of the narrow nylon brush on the Durotec structuring/brushing machine. Narrow brushes are the ideal solution for hard-to-reach areas.
Saw blade with 24 teeth
Saw blade with flat teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Made in Germany, take advantage of the extremely solid German quality.
Saw blade with 32 teeth
Construction saw blade with 'flat angle' teeth and a wide back for improved support of the tooth. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for use on pallet wood or wood with remnants of nails,... Thanks to the wide back, the teeth are less likely to be damaged if you hit nails or other debris in the wood during sawing. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
Vous pouvez attacher cet accessoire au GuidePRO afin de pouvoir fixer le GuidePRO dans votre verrou d'onglet. Idéal pour les coupes répétitives et cohérentes. Le GuidePRO est livré avec un connecteur coulissant Mitre et est conçu pour des configurations rapides et offre d'excellents avantages d'alimentation pour les coupes de scie à ruban. Certains utilisateurs de GuidePRO souhaitent bénéficier des avantages de GuidePRO, mais en tant qu'outil à position fixe. La barre d'ancrage GuidePRO verrouille le GuidePRO solidement en place, de sorte que vous n'avez pas à déplacer l'outil à chaque coupe.
La barre d'ancrage GuidePRO étend l'utilisation du GuidePRO à la table de toupie et à la scie circulaire à table. L'opération de fraisage ou de sciage est différente sur une scie de fraisage ou de table que sur la scie à ruban où la lame descend dans la table. Bow Products nécessite que l'ancrage à onglet soit utilisé avec le GuidePRO lorsqu'il est utilisé sur la toupie ou la scie circulaire à table pour verrouiller l'outil en place pour votre sécurité et celle de vos outils. La barre d'ancrage GuidePRO a deux options pour une alimentation gauche ou droite sur ces machines.
Caractéristiques et installation de la barre d'ancrage GuidePRO:
L'ancrage GuidePRO a une barre d'onglet extensible de 19 mm ou ¾ pouces avec des boutons de verrouillage. La tige d'ancrage a des fentes pour le montage sur la base GuidePRO. Utilisez simplement la clé Allen fournie et dévissez la came d'onglet. Utilisez la même vis pour fixer la tige d'ancrage.
Notez que la tige d'ancrage a deux options de montage pour une alimentation gauche ou droite. Placez le coin Boss sélectionné dans la fente en bas de la base GuidePRO. Serré la vis. La fente de la base GuidePRO fournit la même plage de positionnement du GuidePRO au guide.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. Simply press the trigger to run the glue over the roll. Using this trigger you will always obtain the right amount of glue for your project. Thanks to the support, the hand gluer can easily be put away. For cleaning, you can keep this adhesive under water without risk of damage.
Attention: this adhesive comes standard with a rubber roller, suitable for vinyl adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T).
Set profielmessen hoogte 40mm Nr. 0092 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Helical planing and routing cutterhead with reversible knives in high quality carbide (HW). This cutter head is developped for finishing, planing or calibrating on moulding machines. Optionally you can use a mold and run-up ring to make curved workpieces. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm. The heads can be fitted with spurs on one or both sides on demand.
Le TT60/9 est un lit à rouleaux avec 9 rouleaux sur roulements à billes.
Le support est équipé d’une base robuste et de 9 rouleaux (largeur 360 mm) dans un lit à rouleaux (1950 x 450 x 95 mm) et a une capacité de charge de 500 kg. La hauteur de travail minimale est de 660 mm, la hauteur de travail maximale est de 1005 mm.
Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Cette presseur peut être utilisé sur le Belmash SDR2200.
Adapter ring to reduce the bore of your saw blade to comply with your machine. Make sure every saw blade is compatible with your own machine thanks to these convenient reduction rings.
Reduction from bore 40mm to 32mm.
The length of this bit is 115mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers.
The CPL 200 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 200 is the perfect partner for every carpenter on a construction site.
Flat feet for use on the PIHER clamps Mod. POT.
Made from steel
Weight
4 kg
180 kg
2 kg
0,300 kg
1 kg
1 kg
0,6 kg
2 kg
0,05 kg
1 kg
45 kg
3,3 kg
0,05 kg
0,05 kg
14 kg
0,03 kg
Dimensions
ND
ND
ND
7,5 × 2 cm
ND
ND
ND
ND
0,4 cm
ND
ND
30 × 26 × 7 cm
ND
ND
ND
ND
Additional information
Poids
4 kg
Poids
180 kg
Moteur
6 PK
Max. lengte hout
1000mm
Max. Ø hout
450mm
Poids
2 kg
Diamètre
6mm, 8mm, 10mm, 12mm
Queue
15,9 mm
Poids
0,300 kg
Dimensions
7,5 × 2 cm
Poids
1 kg
Diamètre lame de scie
350mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
3,2mm
nombre de dents
24
Poids
1 kg
Diamètre lame de scie
450mm
Diamètre de l\' arbre
30 mm
Epaisseur dent
4,0mm
nombre de dents
32
Poids
0,6 kg
Poids
2 kg
Breedte lijmrol
122mm, 180mm
Inhoud lijmbak
1kg, 1,4kg
Poids
0,05 kg
Dimensions
0,4 cm
Poids
1 kg
Diamètre
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
12
Hauteur de rainure
76,5mm
RPM Min-Max
6000-17600
Poids
45 kg
Longueur du support
360 mm
Diamètre du rouleau
60 mm
Capacité de charge max.
500 kg
Hauteur
660-1005 mm
Nombre de rouleaux
9
Poids
3,3 kg
Dimensions
30 × 26 × 7 cm
Hauteur max. de la pièce
63mm
Largeur max. de la pièce
270mm
Poids
0,05 kg
Diamètre
40mm
Diamètre de l\' arbre
32mm
Poids
0,05 kg
Diamètre
8mm
Longueur
115mm
Queue
13x50mm
Sens de rotation
A gauche, A droite
Poids
14 kg
Puissance
1500W
Voltage
230 V
Largeur de rabotage
200 mm
Schaafdiepte
0-3 mm
Vitesse raboteuse
12.400
Longueur
490mm
Poids
0,03 kg
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy