Description | Kreg KMS7448 Combo-Trak is a 1219 mm (48") long track that can be built into a surface. With this track, you can, for example, make your own router table. This double track has both a 9.5 x 19 millimetre track and a track for 1/4" (6 or 6.3 mm) bolts. The wide track can be used for a mitre guide, featherboards or other clamping device. Most of the regular bolts and clamps for t-track A and B fit in the narrow track. | The Kreg Top Trak is an aluminium track that can be easily attached to an existing fence. Due to the L-shape, the track fits well to the existing fence. Drill Ø 3 mm holes on the back and attach with the screws provided. Length 610 mm. Suitable for use with 6 and 6.3 mm bolts.
For use as an extension for the KMS8000 precision cutting rail from Kreg.
Also available in 1219 mm length. | The Accu-CutTM guide rail is a circular saw accessory that ensures perfectly straight and splinter-free cuts. The Accu-Cut guides the circular saw along an aluminium rail, which keeps the saw straight and allows easy adjustment by aligning the rail with the cutting line. Anti-slip guide strips secure the guide and prevent splinters.
Straight, precise and splinter-free cuts
- Longitudinal, trimming and diagonal cuts in plywood, MDF and boards up to 120 cm long.
- To saw accurately, simply align the guide rail with the markings.
- Anti-slip guide strips keep the rail in place and prevent it from jamming.
- Anti-splinter strips prevent the material from splintering during sawing.
- Start cutting quickly with a starting block that supports the saw and allows the blade guard to operate normally.
- Use the universal carriage to mount practically any circular saw, on the left or right.
- The Kreg Rip-CutTM is compatible with the universal carriage.
- Instead of having to bring your material to the saw, you bring the saw to the material. | The Rip Cut turns your circular saw into a precision tool that can make straight, precise and repeatable cuts in large sheets of plywood and other materials. With the Rip Cut, there is no need to measure or mark and you can keep the saw effortlessly on the cutting line, thanks to a long edge guide that follows the edge of the sheet. Just block the saw on any dimension up to 610 mm with the built-in ruler, and cut.
Mount your saw on the universal carriage, which fits most saws with left or right blades. Then slide the carriage into the aluminium rail. The edge guide is reversible so that both left and right-handers can use it. The Rip Cut is a simple, accurate and affordable way to cut plywood and other boards to size. | The Heavy-Duty Trak is an 'L' shaped, anodised aluminium extrusion that is extremely straight and ideal for heavy-duty commercial applications. This Trak contains four T-slots that accommodate the head of a standard 1/4" (6 mm) hex bolt. A 13mm (1/2") countersunk notch runs along the top and front of the Trak for easy attachment of an adhesive tape measure (sold separately).
The track has a length of 1219 mm. | The Mini-Trak can be used to make numerous types of jigs and clamps for woodworking, such as tapered jigs and cut-off sleds. This adaptation of our popular Traks has a T-slot into which the head of a standard 6 mm hex bolt fits. A hole is provided every 10 centimetres for screwing on the profile. |
Content | Kreg KMS7448 Combo-Trak is a 1219 mm (48") long track that can be built into a surface. With this track, you can, for example, make your own router table. This double track has both a 9.5 x 19 millimetre track and a track for 1/4" (6 or 6.3 mm) bolts. The wide track can be used for a mitre guide, featherboards or other clamping device. Most of the regular bolts and clamps for t-track A and B fit in the narrow track. | The Kreg Top Trak is an aluminium track that can be easily attached to an existing fence. Due to the L-shape, the track fits well to the existing fence. Drill Ø 3 mm holes on the back and attach with the screws provided. Length 610 mm. Suitable for use with 6 and 6.3 mm bolts.
For use as an extension for the KMS8000 precision cutting rail from Kreg.
Also available in 1219 mm length. | The Accu-CutTM guide rail is a circular saw accessory that ensures perfectly straight and splinter-free cuts. The Accu-Cut guides the circular saw along an aluminium rail, which keeps the saw straight and allows easy adjustment by aligning the rail with the cutting line. Anti-slip guide strips secure the guide and prevent splinters.
Straight, precise and splinter-free cuts
- Longitudinal, trimming and diagonal cuts in plywood, MDF and boards up to 120 cm long.
- To saw accurately, simply align the guide rail with the markings.
- Anti-slip guide strips keep the rail in place and prevent it from jamming.
- Anti-splinter strips prevent the material from splintering during sawing.
- Start cutting quickly with a starting block that supports the saw and allows the blade guard to operate normally.
- Use the universal carriage to mount practically any circular saw, on the left or right.
- The Kreg Rip-CutTM is compatible with the universal carriage.
- Instead of having to bring your material to the saw, you bring the saw to the material.
Turn your circular saw into a track-controlled saw.
Make straight, precise and splinter-free cuts with the circular saw and the Accu-CutTM circular saw guide system to get started right away. It rips, cuts and angles plywood, MDF and other large boards up to 120 cm in length with super-easy installation, extreme precision and incredible control.
The Accu-Cut moves the circular saw in a straight line by guiding it along an aluminium rail.
The Accu-Cut™ design makes it easy to set up by aligning the rail with the cutting line.
Thanks to the double guide strips, no clamps are needed to hold the rail in place. They have a non-slip coating to prevent slipping and an anti-shattering factor to prevent shattering cuts. In addition, the rail makes it easy to make straight cuts on sheets that do not have a straight, flat edge.
Circular saws do not have effective guides that ensure they move straight along a cutting line. Moreover, it can be difficult to see the cutting path of the blade. Together, these things make it a challenge to keep a saw at the cut you want. Circular saws also often cause facings to shatter.
The Accu-Cut™ solves these problems. The Accu-Cut™ is also portable, so you can bring the saw to the workpiece and cut with precision, instead of having to handle heavy boards on a table saw.
The Accu-Cut™ is easy and intuitive for beginners, but robust enough for professionals. Because it is not necessary to hold the saw straight and guide it manually along a cutting line, the Accu-Cut™ is ideal for less experienced users. Accu-Cut™ also makes professionals faster and more productive because it makes a variety of cuts quickly and easily. | The Rip Cut turns your circular saw into a precision tool that can make straight, precise and repeatable cuts in large sheets of plywood and other materials. With the Rip Cut, there is no need to measure or mark and you can keep the saw effortlessly on the cutting line, thanks to a long edge guide that follows the edge of the sheet. Just block the saw on any dimension up to 610 mm with the built-in ruler, and cut.
Mount your saw on the universal carriage, which fits most saws with left or right blades. Then slide the carriage into the aluminium rail. The edge guide is reversible so that both left and right-handers can use it. The Rip Cut is a simple, accurate and affordable way to cut plywood and other boards to size. | The Heavy-Duty Trak is an 'L' shaped, anodised aluminium extrusion that is extremely straight and ideal for heavy-duty commercial applications. This Trak contains four T-slots that accommodate the head of a standard 1/4" (6 mm) hex bolt. A 13mm (1/2") countersunk notch runs along the top and front of the Trak for easy attachment of an adhesive tape measure (sold separately).
The track has a length of 1219 mm. | The Mini-Trak can be used to make numerous types of jigs and clamps for woodworking, such as tapered jigs and cut-off sleds. This adaptation of our popular Traks has a T-slot into which the head of a standard 6 mm hex bolt fits. A hole is provided every 10 centimetres for screwing on the profile. |
Reviews
There are no reviews yet.