€822,31 (excl. VAT)
€995,00 (incl. VAT)
WOOD DUST IS HARMFULL TO YOUR HEALTH: proper dust extraction plays an important role in a safe and healthy working environment.Unlike other standard protective hoods that offer limited protection from the saw blade and poor dust control, the ITAMAC Orca S17 is the ultimate protective hood designed for a safer working environment, cleaner workshops and an overall enjoyable working experience on your table saw. The transparent cover is height adjustable and equipped with a Ø 100 mm connection that ensures efficient extraction. This large connection ensures optimum suction without loss of air speed as is the case with other small-diameter protective caps. Can be used on almost all types of table saws: The robust steel upper arm swings smoothly away and back to the working position. The transparent protective cover is easy to lift for quick access to the saw blade. The upper arm is telescopically adjustable from +/-880 mm to a maximum of +/- 1700 mm and therefore fits 99% of all table saws including Itamac, SawStop, Harvey, Grizzly and many others.
TIP: This extractor is universal and thus also fits all other classic circular saw tables!
ALSO VIEW THE ITAMAC BROCHURE HERE
Stationary saws are always equipped with a large dust outlet, e.g. Ø 100 mm a very common size. Dust extractors for stationary machines also start with this diameter of 100mm and as the power of the extractor increases, we branch off to 2 x 100mm, 3 x 100mm or even more. So this diameter of 100mm should always be maintained from dust collector to the saw machine. This is to maintain air speed, which converts into sufficient suction.
A stationary saw machine has a 100-mm dust outlet on the body of the machine but along the top of the saw table, the problem usually arises with every user for efficient extraction. Usually, these saw tables have a outlet or guard on the splitting wedge with a diameter of only 40 mm. This thin outlet hose at the top is then going to branch off to a 100mm to 40mm reducer. This change in diameter creates the problem: because here the air velocity will immediately be slowed down and thus the suction power of your extraction can never be optimally utilised.
The ORCA S17 floating hood is deployable to all types of saw tables or panel saws and has a direct suction from diameter 100mm to above the saw blade. Air velocity is optimal without airflow deceleration. Using efficient dust extraction, this dust hood will ensure clean air in your workshop and help remove the dust that accumulates on top of the workpiece. Furthermore, the large transparent dust cover ensures a clear view of your workpiece.
And as the word itself says “floating extractor”: you can directly saw any height without being bothered by the classic guard mounted on the splitting wedge. That means you can make shallow cuts (grooves), dado cuts, and basically any type of cut you would normally make. You could even use a homemade carriage or jig with this hood.
Can be used on almost all types of table saws: The robust steel upper arm swings smoothly away and back to the working position. The transparent protective cover is easy to lift for quick access to the saw blade. The upper arm is telescopically adjustable from +/-880 mm to a maximum of +/- 1700 mm.
Rugged durability – The floating dust collector is made of heavy-duty powder-coated aluminium. The support legs connect under the extension table and provide rigidity for the large dust tube and saw blade guard.
| Weight | 32 kg |
|---|---|
| Telescopic arm | adjustable between 90 cm and 175 cm |
| Diameter extraction | 100 mm |
| Height above worktable | 34,5 cm |
per piece, delivered complete
No video available for this product!
| Settings | Overhead guard ITAMAC Orca S17 remove | BELMASH - Mortising table for SDM2500 remove | BOW PushPRO Push stick remove | Clamping support with wheels SPR770T remove | Biscuits box of 1000 pieces - Nr 0, 10 of 20 remove | BOW FPS2 replacement foam Ultralight - 2 pcs remove | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Overhead guard ITAMAC Orca S17 remove | BELMASH - Mortising table for SDM2500 remove | BOW PushPRO Push stick remove | Clamping support with wheels SPR770T remove | Biscuits box of 1000 pieces - Nr 0, 10 of 20 remove | BOW FPS2 replacement foam Ultralight - 2 pcs remove | ||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||
| SKU | IT-ORCAS17 | BEL-BMMD01 | PIH-63107 | VIR-SPR770T | PIH-63103 | |||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||
| Price | €822,31 (excl. VAT) | €111,57 (excl. VAT) | €22,99 (excl. VAT) | €294,76 (excl. VAT) | €36,39 (excl. VAT) | €19,08 (excl. VAT) | ||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||
| Description |
Unlike other standard protective hoods that offer limited protection from the saw blade and poor dust control, the ITAMAC Orca S17 is the ultimate protective hood designed for a safer working environment, cleaner workshops and an overall enjoyable working experience on your table saw. The transparent cover is height adjustable and equipped with a Ø 100 mm connection that ensures efficient extraction. This large connection ensures optimum suction without loss of air speed as is the case with other small-diameter protective caps. Can be used on almost all types of table saws: The robust steel upper arm swings smoothly away and back to the working position. The transparent protective cover is easy to lift for quick access to the saw blade. The upper arm is telescopically adjustable from +/-880 mm to a maximum of +/- 1700 mm and therefore fits 99% of all table saws including Itamac, SawStop, Harvey, Grizzly and many others.
TIP: This extractor is universal and thus also fits all other classic circular saw tables!
ALSO VIEW THE ITAMAC BROCHURE HERE | This Belmash mortising table is compatible with the SDM2500 machine. The mortising table can be installed instead of the milling table. The mortising table can be fully adjusted in height and left / right. Includes two clamps for fixation of the workpiece. | BOW push stick made of PA, high density EVA foam grip: reversible and replaceable. | Practical support with wheels that makes it possible for one person to hold and transport all types of panels, heavy doors, wood, PVC, aluminium, etc. For pieces with a maximum thickness between 6mm and 110mm. Thanks to its robust design, the SPR770T easily supports pieces up to 200kg. The clamp is covered with a protective coating to prevent damage to your pieces. The SPR770T support is very easy to use. Secure your piece by placing it in the clamp and pressing. To unload it again, use the foot pedal. With the help of the pneumatic wheels, the support can easily be moved, even on uneven ground. This mobile support even manages to overcome a few low steps without any problems. Thanks to the blocking system, you can also use this support for stationary work. In short, the ideal accessory for, for example, installers of doors that have to work on their own. | Virutex brand wooden biscuits, packaged per box of 1000 pieces. Make your choice for number 0, 10 or 20. | The Ultralight spring foams are suitable for the FeatherPRO and FeatherDUO featherboards. Ultralight springs are less stiff than standard springs. This is achieved by a thinner neck on the spring hinge. Set of 2 pieces. | ||||||||||||||||||||||||||
| Content | Stationary saws are always equipped with a large dust outlet, e.g. Ø 100 mm a very common size. Dust extractors for stationary machines also start with this diameter of 100mm and as the power of the extractor increases, we branch off to 2 x 100mm, 3 x 100mm or even more. So this diameter of 100mm should always be maintained from dust collector to the saw machine. This is to maintain air speed, which converts into sufficient suction. A stationary saw machine has a 100-mm dust outlet on the body of the machine but along the top of the saw table, the problem usually arises with every user for efficient extraction. Usually, these saw tables have a outlet or guard on the splitting wedge with a diameter of only 40 mm. This thin outlet hose at the top is then going to branch off to a 100mm to 40mm reducer. This change in diameter creates the problem: because here the air velocity will immediately be slowed down and thus the suction power of your extraction can never be optimally utilised. The ORCA S17 floating hood is deployable to all types of saw tables or panel saws and has a direct suction from diameter 100mm to above the saw blade. Air velocity is optimal without airflow deceleration. Using efficient dust extraction, this dust hood will ensure clean air in your workshop and help remove the dust that accumulates on top of the workpiece. Furthermore, the large transparent dust cover ensures a clear view of your workpiece. And as the word itself says "floating extractor": you can directly saw any height without being bothered by the classic guard mounted on the splitting wedge. That means you can make shallow cuts (grooves), dado cuts, and basically any type of cut you would normally make. You could even use a homemade carriage or jig with this hood. Can be used on almost all types of table saws: The robust steel upper arm swings smoothly away and back to the working position. The transparent protective cover is easy to lift for quick access to the saw blade. The upper arm is telescopically adjustable from +/-880 mm to a maximum of +/- 1700 mm. Rugged durability - The floating dust collector is made of heavy-duty powder-coated aluminium. The support legs connect under the extension table and provide rigidity for the large dust tube and saw blade guard. | This Belmash mortising table is compatible with the SDM2500 machine. The mortising table can be installed instead of the milling table. The mortising table can be fully adjusted in height and left / right. Includes two clamps for fixation of the workpiece. | The PushPRO Push stick offers an unprecedented safety improvement and innovative new advantages in a tool category that has hardly seen any innovations for years. With the High Density EVA tips, the PushPRO improves feed control, protects the wood and protects you and your tools in case of accidental contact between the push stick and the saw blade. The PushPRO prevents the use of plastic to guide the wood. When pressure is applied, plastic can affect the porosity of some woods. Plastic does not absorb vibrations due to the high-density foam used in the PushPRO. PushPRO provides a better cut than a plastic push stick. | Practical support with wheels that makes it possible for one person to hold and transport all types of panels, heavy doors, wood, PVC, aluminium, etc. For pieces with a maximum thickness between 6mm and 110mm. Thanks to its robust design, the SPR770T easily supports pieces up to 200kg. The clamp is covered with a protective coating to prevent damage to your pieces. The SPR770T support is very easy to use. Secure your piece by placing it in the clamp and pressing. To unload it again, use the foot pedal. With the help of the pneumatic wheels, the support can easily be moved, even on uneven ground. This mobile support even manages to overcome a few low steps without any problems. Thanks to the blocking system, you can also use this support for stationary work. In short, the ideal accessory for, for example, installers of doors that have to work on their own. | Virutex brand wooden biscuits, packaged per box of 1000 pieces. Make your choice for number 0, 10 or 20. | The Ultralight spring foams are suitable for the FeatherPRO and FeatherDUO featherboards. Ultralight springs are less stiff than standard springs. This is achieved by a thinner neck on the spring hinge. Set of 2 pieces. | ||||||||||||||||||||||||||
| Weight | 32 | 9.7 | 1 | 8 | 1 | 0.5 | ||||||||||||||||||||||||||
| Dimensions | N/A | 34 × 18,5 cm | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.