Saw blade for aluminium SOLID Ø250mm – bore 32mm

95,00 (excl. VAT)

114,95 (incl. VAT)

Saw blade with 80 teeth

Saw blade ‘Xtra Cut’ with FZ/TR triple chip teeth and a negative hook angle of 5°. This saw blade is well suited for the cutting of solid aluminium, PVC and non-ferro metals. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise.

Compare

Main features

  • Fine cut HW saw blade
  • FZ/TR triple chip teeth
  • For solid aluminium
  • For PVC and non-ferro metals
  • No noise
  • Increased stability and reduced vibrations
  • Negative hook angle 5°

Description

Saw blade with 80 teeth

Saw blade ‘Xtra Cut’ with FZ/TR triple chip teeth and a negative hook angle of 5°. This saw blade is well suited for the cutting of solid aluminium, PVC and non-ferro metals. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise.

Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut.

Brand

Sistemi Klein

With more than 40 years of experience, Sistemi has grown into a leading manufacturer of high-quality, professional tools for machining wood, aluminum and plastic. The Klein brand is synonymous with high-quality tools thanks to continuous investment in the use of the latest technology and in training, with an increasingly young and dynamic workforce made up of technicians, designers and subject matter experts fully available to meet the many needs requires global competition. Sistemi today exports its products to more than 60 countries around the world through the best woodworking retailers and reinforces its success from year to year by continuously starting and developing new projects, always with a focus on 'customer satisfaction'.

Additional information

Weight 1 kg
Diameter sawblade

250mm

Shaft diameter

32mm

Thickness teeth

3,4mm

Thickness Sawblade

2,6mm

Number of teeth

80

Pin holes

2/11/63

Standard equipment

Available per piece

No video available for this product!

Downloads

No download availble.

Reviews

There are no reviews yet.

Be the first to review “Saw blade for aluminium SOLID Ø250mm – bore 32mm”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSaw blade for aluminium SOLID Ø250mm – bore 32mm removeSaw blade 'Xtra Cut' for aluminium HOLLOW Ø300mm – bore 32mm removeSaw blade 'Xtra Cut' for aluminium HOLLOW Ø250mm – bore 30mm removeSaw blade 'Xtra Cut' for aluminium HOLLOW Ø250mm – bore 32mm removeSaw blade for aluminium SOLID Ø350mm – bore 32mm removeSaw blade 'Xtra Cut' for aluminium HOLLOW Ø450mm – bore 32mm remove
NameSaw blade for aluminium SOLID Ø250mm – bore 32mm removeSaw blade 'Xtra Cut' for aluminium HOLLOW Ø300mm – bore 32mm removeSaw blade 'Xtra Cut' for aluminium HOLLOW Ø250mm – bore 30mm removeSaw blade 'Xtra Cut' for aluminium HOLLOW Ø250mm – bore 32mm removeSaw blade for aluminium SOLID Ø350mm – bore 32mm removeSaw blade 'Xtra Cut' for aluminium HOLLOW Ø450mm – bore 32mm remove
Image
SKUKL-LB5008032
Rating
Price95,00 (excl. VAT)112,00124,00 (excl. VAT)92,0095,00 (excl. VAT)92,0095,00 (excl. VAT)124,00132,30 (excl. VAT)187,00192,00 (excl. VAT)
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Select options

Select options

Select options

Select options

Select options

DescriptionSaw blade with 80 teeth Saw blade 'Xtra Cut' with FZ/TR triple chip teeth and a negative hook angle of 5°. This saw blade is well suited for the cutting of solid aluminium, PVC and non-ferro metals. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise.Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Available with different number of teeth.Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Available with different number of teeth.Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Available with different number of teeth.Saw blade 'Xtra Cut' with FZ/TR triple chip teeth and a negative hook angle of 5°. This saw blade is well suited for the cutting of solid aluminium, PVC and non-ferro metals. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Available with different number of teeth.Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Available with different number of teeth. Attention: the saw blade with 96 teeth is available in teeth thickness 3,6 or 4,0
ContentSaw blade with 80 teeth Saw blade 'Xtra Cut' with FZ/TR triple chip teeth and a negative hook angle of 5°. This saw blade is well suited for the cutting of solid aluminium, PVC and non-ferro metals. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut.Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.Saw blade 'Xtra Cut' with FZ/TR triple chip teeth and a negative hook angle of 5°. This saw blade is well suited for the cutting of solid aluminium, PVC and non-ferro metals. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.Saw blade ‘Xtra Cut’ with FZ/TR ‘triple chip’ teeth and a positive hook angle of 5°. This saw blade is suited for use with aluminium (hollow), PVC and non-ferro metals and can be used for cutting of aluminium profiles and extrusions with a thickness between 2 and 5mm. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations. No noise. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.
Weight1 kg1 kg1 kg1 kg1 kg1 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1 kg
Diameter sawblade

250mm

Shaft diameter

32mm

Thickness teeth

3,4mm

Thickness Sawblade

2,6mm

Number of teeth

80

Pin holes

2/11/63

Weight 1 kg
Diameter sawblade

300mm

Shaft diameter

32mm

Thickness teeth

3,4mm

Thickness Sawblade

2,6mm

Number of teeth

72, 84, 96

Pin holes

2/11/63

Weight 1 kg
Diameter sawblade

250mm

Shaft diameter

30 mm

Thickness teeth

3,4mm

Thickness Sawblade

2,6mm

Number of teeth

60, 80

Pin holes

2/11/63

Weight 1 kg
Diameter sawblade

250mm

Shaft diameter

32mm

Thickness teeth

3,4mm

Thickness Sawblade

2,6mm

Number of teeth

60, 80

Pin holes

2/11/63

Weight 1 kg
Diameter sawblade

350mm

Shaft diameter

32mm

Thickness teeth

3,4mm

Thickness Sawblade

2,6mm

Number of teeth

108, 84, 96

Pin holes

2/11/63

Weight 1 kg
Diameter sawblade

450mm

Shaft diameter

32mm

Thickness teeth

3,6mm, 4,0mm

Thickness Sawblade

3,2mm

Number of teeth

108, 96, 96 thin

Pin holes

2/11/63