Trimming And Sizing Saw Blade ‘Xtra Cut’ Ø250mm – bore 30mm

76,2088,10 (excl. VAT)

92,20 - 106,60 (incl. VAT)

Trimming and sizing saw blade ‘Xtra Cut’ with FZ/TR triple chip trapezoidal teeth, suited for the cutting of hardwoods, double sided veneer and laminate board, MDF, hard paper and thermoplastic boards. Available with different number of teeth.

Compare

Main features

  • Fine cut HW saw blade
  • FZ/TR ‘triple chip’ teeth
  • For hardwood, MDF and hard paper
  • For double sided veneer and laminate board
  • Long life
  • Better stability and finishing
  • Low noise

Description

Trimming and sizing saw blade ‘Xtra Cut’ with FZ/TR triple chip trapezoidal teeth, suited for the cutting of hardwoods, double sided veneer and laminate board, MDF, hard paper and thermoplastic boards. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations.

Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.

Additional information

Weight 1 kg
Diameter sawblade

250mm

Shaft diameter

30 mm

Thickness teeth

3,2mm

Thickness Sawblade

2,2mm

Number of teeth

60, 80

Pin holes

PH02

Standard equipment

Available per piece

Brand

Sistemi Klein

With more than 40 years of experience, Sistemi has grown into a leading manufacturer of high-quality, professional tools for machining wood, aluminum and plastic. The Klein brand is synonymous with high-quality tools thanks to continuous investment in the use of the latest technology and in training, with an increasingly young and dynamic workforce made up of technicians, designers and subject matter experts fully available to meet the many needs requires global competition. Sistemi today exports its products to more than 60 countries around the world through the best woodworking retailers and reinforces its success from year to year by continuously starting and developing new projects, always with a focus on 'customer satisfaction'.

No video available for this product!

Downloads

No download availble.

Reviews

There are no reviews yet.

Be the first to review “Trimming And Sizing Saw Blade ‘Xtra Cut’ Ø250mm – bore 30mm”

Your email address will not be published.

You may also be interested in...

Quick Comparison

SettingsTrimming And Sizing Saw Blade 'Xtra Cut' Ø250mm - bore 30mm removeTrimming And Sizing Saw Blade for use without Scoring Blade Ø300mm - bore 30mm removeTrimming And Sizing Saw Blade 'Xtra Cut' Ø300mm - bore 30mm removeSet of saw blades Xtra Cut Ø300mm + Ø120mm removeTrimming And Sizing Saw Blade for use without Scoring Blade Ø250mm - bore 30mm removeTrimming And Sizing Saw Blade for use without Scoring Blade Ø350mm - bore 30mm remove
Image
SKUKL-FB30306030Z1ZSKITKL-FB25304830KL-FB35007230
Rating
Price76,2088,10 (excl. VAT)113,00 (excl. VAT)94,60106,60 (excl. VAT)247,93 (excl. VAT)95,10 (excl. VAT)152,20 (excl. VAT)
Stock
Availability
Add to cart

Select options

Add to cart

Select options

Add to cart

Add to cart

Add to cart

DescriptionTrimming and sizing saw blade 'Xtra Cut' with FZ/TR triple chip trapezoidal teeth, suited for the cutting of hardwoods, double sided veneer and laminate board, MDF, hard paper and thermoplastic boards. Available with different number of teeth.Saw blade with 60 teeth Trimming and sizing saw blade with HZ/DZ inverted “V” and hollow ground teeth. Suited for cutting of boards with synthetic resin coating, double sided veneer and laminate boards and plywood without the help of a scoring blade. To be used on table saws. These saw blades offer great finish and longer life.Trimming and sizing saw blade 'Xtra Cut' with FZ/TR triple chip trapezoidal teeth, suited for the cutting of hardwoods, double sided veneer and laminate board, MDF, hard paper and thermoplastic boards. Available with different number of teeth.This professional set of saw blades from Sistemi Klein contains a main saw blade of Ø 300mm with 96 teeth and an adjustable scoring blade. Ideal set for aperfect finishof sheet material on your panel saw.Saw blade with 48 teeth Trimming and sizing saw blade with HZ/DZ inverted “V” and hollow ground teeth. Suited for cutting of boards with synthetic resin coating, double sided veneer and laminate boards and plywood without the help of a scoring blade. To be used on table saws. These saw blades offer great finish and longer life.Saw blade with 72 teeth Trimming and sizing saw blade with HZ/DZ inverted “V” and hollow ground teeth. Suited for cutting of boards with synthetic resin coating, double sided veneer and laminate boards and plywood without the help of a scoring blade. To be used on table saws. These saw blades offer great finish and longer life.
Content
Trimming and sizing saw blade 'Xtra Cut' with FZ/TR triple chip trapezoidal teeth, suited for the cutting of hardwoods, double sided veneer and laminate board, MDF, hard paper and thermoplastic boards. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations.
Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.
Saw blade with 60 teeth Trimming and sizing saw blade with HZ/DZ inverted “V” and hollow ground teeth. Suited for cutting of boards with synthetic resin coating, double sided veneer and laminate boards and plywood without the help of a scoring blade. To be used on table saws. These saw blades offer great finish and longer life. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut.
Trimming and sizing saw blade 'Xtra Cut' with FZ/TR triple chip trapezoidal teeth, suited for the cutting of hardwoods, double sided veneer and laminate board, MDF, hard paper and thermoplastic boards. To be used on table saws. These saw blades offer great finish and longer life. No-noise and less vibration thanks to a special synthetic resin filled in the slots to increase the stability and reduce vibrations.
Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.
This professional set of saw blades from Sistemi Klein contains a main saw blade of Ø 300mm with 96 teeth and an adjustable scoring blade Ø 120mm. Ideal set for aperfect finishof sheet material on your panel saw.
Saw blade with 48 teeth Trimming and sizing saw blade with HZ/DZ inverted “V” and hollow ground teeth. Suited for cutting of boards with synthetic resin coating, double sided veneer and laminate boards and plywood without the help of a scoring blade. To be used on table saws. These saw blades offer great finish and longer life. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut.
Saw blade with 72 teeth Trimming and sizing saw blade with HZ/DZ inverted “V” and hollow ground teeth. Suited for cutting of boards with synthetic resin coating, double sided veneer and laminate boards and plywood without the help of a scoring blade. To be used on table saws. These saw blades offer great finish and longer life. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut.
Weight111211
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1 kg
Diameter sawblade

250mm

Shaft diameter

30 mm

Thickness teeth

3,2mm

Thickness Sawblade

2,2mm

Number of teeth

60, 80

Pin holes

PH02

Weight 1 kg
Diameter sawblade

300mm

Shaft diameter

30 mm

Thickness teeth

3,2mm

Thickness Sawblade

2,2mm

Number of teeth

60

Pin holes

PH02

Weight 1 kg
Diameter sawblade

300mm

Shaft diameter

30 mm

Thickness teeth

3,2mm

Thickness Sawblade

2,2mm

Number of teeth

72, 96

Pin holes

PH02

Weight 2 kg
Diameter sawblade

120mm, 300mm

Number of teeth

12+12, 96

Weight 1 kg
Diameter sawblade

250mm

Shaft diameter

30 mm

Thickness teeth

3,2mm

Thickness Sawblade

2,2mm

Number of teeth

48

Pin holes

PH02

Weight 1 kg
Diameter sawblade

350mm

Shaft diameter

30 mm

Thickness teeth

3,5mm

Thickness Sawblade

2,5mm

Number of teeth

72

Pin holes

PH02