Une mise à jour facile pour améliorer la filtration de votre aspirateur Air Flux 3000AF ou 6000AF jusqu'à 30 fois. Le filtre plissé capture la poussière jusqu'à 1µm, contre 30 microns pour le sac filtrant standard et 5 microns pour le sac filtrant amélioré fibre. . Le filtre est autonettoyant grâce au levier situé en haut de la cartouche. Il suffit de tourner la poignée pour enlever la poussière des plis du filtre et elle tombe dans le fond du sac à résidus en PVC fourni.
Forstner drill bit with cylindrical shank for boring hinges with the best quality on every kind of wood or panels. This high quality hinge boring bit has two Tungsten cutting edges, two Tungsten spurs and a HW center point for boring with the best quality on every kind of wood or panels. Right hand boring only
This handy tool allows you to adjust your planing knives or planing bits quickly, easily and precisely. With the help of the magnets, the tool fixes itself on the shaft. You can then place the planing knive in the correct position in no time at all. Standard delivery in a neat wooden case.
Capot à poussière en PVC noir avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La dimension de l'ouverture est 340x180mm.
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
This stop is made for the Piher TCP Piston clamp for welding tables. Galvanized and made of carbon steel.
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
Powerful, orbital sander designed for polishing or sanding work with a high-quality finish. The LR46L is well-balanced and delivers high quality work, without the need for touching up afterwards. The standard mounted PUR base plate is virtually unbreakable and allows the installation of any standard sanding paper. Optionally, a base plate with Velcro is available. Thanks to its ergonomic design with front handle and integrated anti-slip surfaces, this machine is very comfortable to work with. And that for both right- and left-handed people.
Finally, this orbital sander is equipped with a new and unique dust protection system. This is to prevent dust from damaging the vulnerable parts. As standard, the LR46L is equipped with an integrated dust extractor and dust bag. Thanks to this improved protection against dust and dust accumulation, both your machine and your sanding paper will last longer than a classic orbital sander.
Fraiseuse spéciale pour charnières de porte et toutes sortes de ferrures pour cadres et portes. La machine s'installe facilement sur les portes sans mesurer et sans laisser de traces. L'étau de cet accessoire a une largeur maximale de 200 mm ou 250 mm. Les deux modèles sont disponibles. Il est facile de monter trois ou quatre charnières par porte, pour une ouverture à gauche ou à droite. Double butée de profondeur pour fraiser les deux profondeurs de paumelles invisibles ou cachées en un seul mouvement, sans avoir à changer le moule. La machine est également toujours adaptée au fraisage de toute charnière traditionnelle. Livraison standard dans une mallette de transport pratique en PVC.
Note : Pour obtenir un résultat précis, tant pour les charnières invisibles que pour les charnières classiques, il est recommandé d'utiliser un modèle. Des modèles pour les charnières classiques les plus courantes (comme Argenta 80/80) ou les charnières invisibles (comme Argenta Invisible Medium ou Argenta Invisible Neo) sont toujours disponibles. Vous n'utilisez pas de charnières Argenta ? Ou vous voulez fraiser des serrures ou des plaques de verrouillage pour les serrures ? Contactez-nous et nous créerons un gabarit personnalisé pour vous.
Mandrin à cône Morse 1, avec clé et pivotant.
Straight router bits from Sistemi Klein ensure smooth and well-finished edges. Suitable for trimming and milling with portable routers. Work more easily using the ball bearing on the shank.
Two flutes provide fast cutting and good chipping ejection. Thanks to the cutting edges in high quality carbide metal, you can use this bit effortlessly on most types of wood.
Forstner drill bit with cylindrical shank for boring hinges with the best quality on every kind of wood or panels. This high quality hinge boring bit has two Tungsten cutting edges, two Tungsten spurs and a HW center point for boring with the best quality on every kind of wood or panels. Right hand boring only
Adapter ring to reduce the bore of your saw blade to comply with your machine. Make sure every saw blade is compatible with your own machine thanks to these convenient reduction rings.
Reduction from bore 40mm to 30mm.
The hose's unique segmented design allows it to expand, contract and twist to the shape that works best for your space and then hold that position, giving you almost limitless possibilities to improve your dust collection system. The hose has a length of 30 to 90 cm. The ability to bend, expand or contract around obstacles to fit perfectly in a given space and maintain its shape makes the FlexHold hose ideal for tight spots and tricky dust collection applications where conventional hoses just don't work. You will find countless ways to use this smart product.
Set of profile knives of height 40mm Nr. 0033 suited for universal moulding blocks. Used for moulding of wood at low costs. The steel alloy with 16% cobalt guarantees a high quality cut and a comfortable cutting process.
La conception segmentée unique du tuyau lui permet de s'étendre, de se contracter et de se tordre à la forme qui convient le mieux à votre espace, vous offrant des possibilités presque illimitées d'améliorer votre système de dépoussiérage. Fixez l'ensemble à votre perceuse à colonne, perceuse multibroches, tour à bois ou autre machine et résolvez enfin ce problème de poussière.
Adaptateur 1210
Cutter head in light metal with reversible blades in high quality carbide (HW) to create beautiful profiles on your furniture or door panels. The maximum length of this panel raising profile is 54mm. The cutter head comes in a sturdy plastic case, with key to easily replace the knives. To get even more out of your cutter head, a total of six profile knives are available. Profile knife A is mounted on the cutter head as standard. The other knives, type B, C, D and E are available separately. Thanks to the tungsten carbide blades, this profile cutter cuts effortlessly through solid boards or solid wood. Also suitable for use on MDF.
Available with bore 30mm or 50mm.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Cet outil pratique vous permet de régler vos couteaux ou fers de raboteuse rapidement, facilement et avec précision. À l'aide des aimants, l'outil se fixe sur l'arbre de la raboteuse. Vous pouvez alors placer le fer dans la bonne position en un rien de temps. Livraison standard dans une caisse en bois soignée.
Content
Une mise à jour facile pour améliorer la filtration de votre aspirateur Air Flux 3000AF ou 6000AF jusqu'à 30 fois. Le filtre plissé capture la poussière jusqu'à 1µm, contre 30 microns pour le sac filtrant standard et 5 microns pour le sac filtrant amélioré fibre. . Le filtre est autonettoyant grâce au levier situé en haut de la cartouche. Il suffit de tourner la poignée pour enlever la poussière des plis du filtre et elle tombe dans le fond du sac à résidus en PVC fourni.
Forstner drill bit with cylindrical shank for boring hinges with the best quality on every kind of wood or panels. This high quality hinge boring bit has two Tungsten cutting edges, two Tungsten spurs and a HW center point for boring with the best quality on every kind of wood or panels. Right hand boring only
This handy tool allows you to adjust your planing knives or planing bits quickly, easily and precisely. With the help of the magnets, the tool fixes itself on the shaft. You can then place the planing knive in the correct position in no time at all. Standard delivery in a neat wooden case.
Capot à poussière en PVC noir avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La dimension de l'ouverture est 340x180mm.
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
This stop is made for the Piher TCP Piston clamp for welding tables. Galvanized and made of carbon steel.
Quarter-circle concave radius cutter to easily and quickly round corners. The bit can also be used to create a flat-bottom groove between two quarter-round shapes. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Thanks to the high quality carbide cutting edges, this bit can be used efficiently on most types of wood.
Powerful, orbital sander designed for polishing or sanding work with a high-quality finish. The LR46L is well-balanced and delivers high quality work, without the need for touching up afterwards. The standard mounted PUR base plate is virtually unbreakable and allows the installation of any standard sanding paper. Optionally, a base plate with Velcro is available. Thanks to its ergonomic design with front handle and integrated anti-slip surfaces, this machine is very comfortable to work with. And that for both right- and left-handed people.
Finally, this orbital sander is equipped with a new and unique dust protection system. This is to prevent dust from damaging the vulnerable parts. As standard, the LR46L is equipped with an integrated dust extractor and dust bag. Thanks to this improved protection against dust and dust accumulation, both your machine and your sanding paper will last longer than a classic orbital sander.
Also available with electronic speed control as model LRE46L.
Fraiseuse spéciale pour charnières de porte et toutes sortes de ferrures pour cadres et portes. La machine s'installe facilement sur les portes sans mesurer et sans laisser de traces. L'étau de cet accessoire a une largeur maximale de 200 mm ou 250 mm. Les deux modèles sont disponibles. Il est facile de monter trois ou quatre charnières par porte, pour une ouverture à gauche ou à droite. Double butée de profondeur pour fraiser les deux profondeurs de paumelles invisibles ou cachées en un seul mouvement, sans avoir à changer le moule. La machine est également toujours adaptée au fraisage de toute charnière traditionnelle.
Nouveau système de serrage facile à régler qui fixe parfaitement la fraise sur l'huisserie ou les portes sans endommager la surface. La mise en place du moule peut également se faire rapidement, il suffit de le cliquer dans le guide et il est immédiatement prêt à l'emploi. La machine est équipée d'un moteur puissant (1000W) avec régulation et contrôle électronique de la vitesse. Grâce à ce système de contrôle, la vitesse reste constante même en charge.
Note : Pour obtenir un résultat précis, tant pour les charnières invisibles que pour les charnières classiques, il est recommandé d'utiliser un modèle. Des modèles pour les charnières classiques les plus courantes (comme Argenta 80/80) ou les charnières invisibles (comme Argenta Invisible Medium ou Argenta Invisible Neo) sont toujours disponibles. Vous n'utilisez pas de charnières Argenta ? Ou vous voulez fraiser des serrures ou des plaques de verrouillage pour les serrures ? Contactez-nous et nous créerons un gabarit personnalisé pour vous.
Livraison standard dans une mallette de transport pratique en PVC.
Mandrin à cône Morse 1, avec clé et pivotant.
Straight router bits from Sistemi Klein ensure smooth and well-finished edges. Suitable for trimming and milling with portable routers. Work more easily using the ball bearing on the shank.
Two flutes provide fast cutting and good chipping ejection. Thanks to the cutting edges in high quality carbide metal, you can use this bit effortlessly on most types of wood.
Forstner drill bit with cylindrical shank for boring hinges with the best quality on every kind of wood or panels. This high quality hinge boring bit has two Tungsten cutting edges, two Tungsten spurs and a HW center point for boring with the best quality on every kind of wood or panels. Right hand boring only
Adapter ring to reduce the bore of your saw blade to comply with your machine. Make sure every saw blade is compatible with your own machine thanks to these convenient reduction rings.
Reduction from bore 40mm to 30mm.
The hose's unique segmented design allows it to expand, contract and twist to the shape that works best for your space and then hold that position, giving you almost limitless possibilities to improve your dust collection system. The hose has a length of 30 to 90 cm. The ability to bend, expand or contract around obstacles to fit perfectly in a given space and maintain its shape makes the FlexHold hose ideal for tight spots and tricky dust collection applications where conventional hoses just don't work. You will find countless ways to use this smart product.
Set of profile knives of height 40mm Nr. 0033 suited for universal moulding blocks. Used for moulding of wood at low costs. The steel alloy with 16% cobalt guarantees a high quality cut and a comfortable cutting process.
La conception segmentée unique du tuyau lui permet de s'étendre, de se contracter et de se tordre à la forme qui convient le mieux à votre espace, vous offrant des possibilités presque illimitées d'améliorer votre système de dépoussiérage. Fixez l'ensemble à votre perceuse à colonne, perceuse multibroches, tour à bois ou autre machine et résolvez enfin ce problème de poussière.
Adaptateur 1210
Cutter head in light metal with reversible blades in high quality carbide (HW) to create beautiful profiles on your furniture or door panels. The maximum length of this panel raising profile is 54mm. The cutter head comes in a sturdy plastic case, with key to easily replace the knives. To get even more out of your cutter head, a total of six profile knives are available. Profile knife A is mounted on the cutter head as standard. The other knives, type B, C, D and E are available separately. Thanks to the tungsten carbide blades, this profile cutter cuts effortlessly through solid boards or solid wood. Also suitable for use on MDF.
Available with bore 30mm or 50mm.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Cet outil pratique vous permet de régler vos couteaux ou fers de raboteuse rapidement, facilement et avec précision. À l'aide des aimants, l'outil se fixe sur l'arbre de la raboteuse. Vous pouvez alors placer le fer dans la bonne position en un rien de temps. Livraison standard dans une caisse en bois soignée.
Weight
11 kg
0,05 kg
0,5 kg
0,5 kg
0,05 kg
0,052 kg
0,05 kg
3 kg
4,3 kg
ND
0,05 kg
0,05 kg
0,05 kg
0,5 kg
0,05 kg
0,5 kg
0,05 kg
1 kg
0,05 kg
0,5 kg
Dimensions
53 × 53 × 65 cm
ND
ND
34 × 18 cm
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
0,4 cm
ND
ND
ND
ND
ND
Additional information
Poids
11 kg
Dimensions
53 × 53 × 65 cm
Poids
0,05 kg
Diamètre
19mm
Longueur
90mm
Queue
10x60mm
Poids
0,5 kg
Poids
0,5 kg
Dimensions
34 × 18 cm
Diamètre
100mm
Poids
0,05 kg
Diamètre
10mm
Longeur de coupe
10mm
Longueur
50mm
Rayon
R4
Faces de coupe
2
Poids
0,052 kg
Poids
0,05 kg
Diamètre
22mm
Longeur de coupe
14,5mm
Longueur
43mm
Rayon
R8
Faces de coupe
2
Poids
3 kg
Puissance
370W
Schuuroppervlakte
115x208mm
Ø Rotatie
2mm
Nominale snelheid
10000rpm
Vibrations
20000/min
Poids
4,3 kg
Puissance
1000W
Pince
8mm
Diamètre max de fraise
32mm
Largeur max de l'étau
200mm, 250mm
Vitesse à vide
14000-27000rpm
Cône Morse
1
Avec clé
Oui
Poids
0,05 kg
Diamètre
25,4mm
Longeur de coupe
45mm
Longueur
95mm
Queue
12mm
Faces de coupe
2
Poids
0,05 kg
Diamètre
34mm
Longueur
90mm
Queue
10x60mm
Poids
0,05 kg
Diamètre
40mm
Diamètre de l\' arbre
30 mm
Poids
0,5 kg
Diamètre
100mm
Poids
0,05 kg
Dimensions
0,4 cm
Poids
0,5 kg
Diamètre
63,5mm
Poids
0,05 kg
Poids
1 kg
Diamètre
180mm
Diamètre de l\' arbre
30 mm, 50 mm
Faces de coupe
2
Hauteur de rainure
23mm
Longeur de coupe
54mm
RPM Min-Max
4000-6500
Poids
0,05 kg
Diamètre
18mm
Longeur de coupe
19mm
Longueur
51mm
Faces de coupe
2
Poids
0,5 kg
Abonnez-vous pour notre bulletin d'information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Comparer
Nous utilisons des cookies pour nous assurer que notre site Web fonctionne aussi bien que possible. Si vous continuez à utiliser ce site Web, nous supposons que cela vous convient.OkPrivacy policy