| Description | La pince à ressort BOW FeatherDUO est une version double pour les pièces plus hautes. Comme le FeatherPRO, il dispose d'une utilisation innovante de peignes en mousse EVA / mousse haute densité et d'un système de serrage qui augmente le contrôle de l'insertion, améliore considérablement le recul et protège mieux votre bois des dommages. Ceci par rapport aux clips à ressort en plastique généraux. L'EVA est un matériau à cellules fermées haute densité avec une longue durée de vie que vous n'avez pas avec les clips à ressort en plastique courants. Idéal pour scies à table, fraiseuses, guides | SHOWROOM MODEL - NEW
Plunge saw TT55 + carrying case + guide rail 1400mm
The TT55 is a plunge-cut saw with a robust and ergonomic design and a cutting range of up to 55 mm. In addition, it can cut to within 13.5 mm of a vertical edge. Using the guide rail, which comes as a standard, you always make perfectly straight and stable cuts. The rail also has an elastic rubber edge that prevents splintering. Thanks to its powerful 1150 W (5000 rpm) motor, this machine cuts easily through different materials. The saw blade's quick stop and automatic shut-off on overload provide increased safety. Thanks to the anti-slip coating on the rear handle, you always have full control of the machine while working. It is equipped with a handle, allowing the easy replacement of the saw blade. | La TT305UTC est la grande sœur de la TT255UTC. Elle offre les mêmes caractéristiques que sa petite sœur, mais possède une lame de scie plus grande : 305 mm avec 60 dents. | The adjustable roller supports workpieces up to 40 kg and can be used both horizontally and vertically. Chrome plated roller with ball bearings on a Heavy-Duty base. The base is equipped with a clamp that can be placed on any surface up to 6.5 cm thick. Height adjustment from 8cm - 40cm in relation to the clamp. The roller support can be quickly disassembled for storage when not in use. | This pneumatic vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications.
Using the rubber seals included as standard, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling. | This handy tool allows you to adjust your planing knives or planing bits quickly, easily and precisely. With the help of the magnets, the tool fixes itself on the shaft. You can then place the planing knive in the correct position in no time at all. Standard delivery in a neat wooden case. | The Kreg Pocket-Hole Jig 520 Pro is a practical and versatile jointing system. This system allows you to create very solid pocket holes in materials with a minimum thickness of 13 mm and a maximum thickness of 38 mm.
The Pocket-Hole Jig 520 Pro has a number of unique points. For example, the jig has a 360° rotatable handle. This handle ensures that you can comfortably use the system on any project. In addition, the Pocket-Hole Jig 520 Pro has a built-in clamping system. You simply squeeze the handle until the material is clamped firmly enough. The non-slip material on the 520 Pro ensures that the jointing system will not shift, no matter what position you use the jig in. You can measure the thickness of the material with the supplied material thickness gauge. | Set profielmessen hoogte 40mm Nr. 0036 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Zaaglint met lengte 1750mm om te gebruiken op de TT250 lintzaagmachine van Tendotools. Dit zaaglint beschikt over 4 TPI (tanden per inch) en is beschikbaar met een breedte van 10 of 13mm. Dit zaaglint in gehard staal "Flexback" is erg geschikt voor multifunctioneel zagen. Gebruik dit zaaglint zowel voor hout als voor plastics. De tanden van het zaagblad kregen een extra thermische behandeling voor verhoogde hardheid. Hierdoor blijft de band erg soepel en verhoogt uw zaagcomfort dankzij de hardheid van de tanden. | De Verticut TT2141DPM is een verticale paneelzaag voor platen van 4100 x 2100 mm en het instapmodel van onze reeks professionele paneelzagen. | Ideal for carpentry outside the workshop. Easy to place on any table without leaving traces. Gives more safety and precision in your work. The advanced design allows you to position the pieces in different ways, while always holding them securely. Its exceptional strength allows you to clamp metal pieces and carry out precision work. Strong, aluminium design with resin jaws to avoid damage to the workpiece. | Set with two milling cutters for making tongue and groove joints with a visible V-profile finish. Perfectly suited for the machining of terrace boards or boards for shutters or gardens sheds. The maximum thickness of the wood is between 24mm and 28mm. Depending on whether the wood is thinner or thicker, the v-profile will be more or less pronounced. | Set profielmessen hoogte 40mm Nr. 0008 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. |
| Content | La pince à ressort BOW FeatherDUO est une version double pour les pièces plus hautes. Comme le FeatherPRO, il dispose d'une utilisation innovante de peignes en mousse EVA / mousse haute densité et d'un système de serrage qui augmente le contrôle de l'insertion, améliore considérablement le recul et protège mieux votre bois des dommages. Ceci par rapport aux clips à ressort en plastique généraux. L'EVA est un matériau à cellules fermées haute densité avec une longue durée de vie que vous n'avez pas avec les clips à ressort en plastique courants. Idéal pour scies à table, fraiseuses, guides | The TT55 is a plunge-cut saw with a robust and ergonomic design and a cutting range of up to 55 mm. In addition, it can cut to within 13.5 mm of a vertical edge. Using the guide rail, which comes as a standard, you always make perfectly straight and stable cuts. The rail also has an elastic rubber edge that prevents splintering. The saw fits directly on the rail, without additional accessories. Thanks to its powerful 1150 W (5000 rpm) motor, this machine cuts easily through different materials. The motor is equipped with a soft start to prevent shocks at startup. The rapid stop of the saw blade and automatic shutdown in the event of an overload provide increased safety. Thanks to the anti-slip coating on the rear handle, you always have full control of the machine while working. It is equipped with a handle, allowing the easy replacement of the saw blade.
As a standard, this plunge-cut saw comes with a 28-teeth saw blade and a diameter of 160 mm and a bore of 20 mm. Standard equipment further includes a handy carrying case and the 1400 mm guide rail.
The Multi Rolls saw blade is also available as an option. This saw blade has a non-stick coating, a diameter of 160 mm and 48 teeth. It is ideal for cutting hard and exotic solid wood, kitchen board, thermoplastic, laminate, MDF, particle board, etc. The guide rail can be extended by means of an additional 800 or 1400 mm guide rail and a connection kit. Furthermore, we also recommend the T-Track Quick clamp to secure the workpiece to the guide rail.
With the 125-mm diameter grooving saw blade and faceted V-tooth, you can also use this plunge-cut saw perfectly to make paneling in hardwood, softwood, laminated panels and other wood-based products. | La TT305UTC est la grande sœur de la TT255UTC. La scie a une lame de 305 mm avec 60 dents (contre 255 mm et 48 dents sur la TT255UTC).
La TT305UTC offre toutes les possibilités d’une scie à onglet et, grâce à sa table supérieure avec guide, elle est également très adaptée à la coupe longitudinale de planches. Sa compacité et son faible poids la rendent particulièrement pratique à emporter lors de vos déplacements.
L'utilisation de roulements à billes sur toutes les articulations assure une rotation précise de la table, de la tête et du système de basculement. Cette scie compacte et légère possède un boîtier en aluminium moulé sous pression, une grande table supérieure facilement réglable avec un guide robuste et un indicateur d'onglet clair. Le moteur a un entraînement par courroie qui fournit un grand couple et est placé à l'arrière, ce qui donne à la scie une grande profondeur de coupe.
La TT305UTC est également équipée d'une poignée verticale ergonomique en D, qui garantit que le mouvement de montée et de descente est effectué à partir du poignet plutôt que de l'épaule. Un autre avantage de cette poignée est qu'elle peut être utilisée aussi bien avec la main gauche qu'avec la main droite. | The adjustable roller supports workpieces up to 40 kg and can be used both horizontally and vertically. Chrome plated roller with ball bearings on a Heavy-Duty base. The base is equipped with a clamp that can be placed on any surface up to 6.5 cm thick. Height adjustment from 8cm - 40cm in relation to the clamp. The roller support can be quickly disassembled for storage when not in use. | This pneumatic vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The table itself must be fixed with screws in the provided holes. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, you can use multiple modules to prevent sagging. The optional distributor (ref. 5046350) allows you to connect up to five basic pneumatic modules at the same time. In this way you can operate them synchronously. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling. | This handy tool allows you to adjust your planing knives or planing bits quickly, easily and precisely. With the help of the magnets, the tool fixes itself on the shaft. You can then place the planing knive in the correct position in no time at all. Standard delivery in a neat wooden case. | The Kreg Pocket-Hole Jig 520 Pro is a practical and versatile jointing system. This system allows you to create very solid pocket holes in materials with a minimum thickness of 13 mm and a maximum thickness of 38 mm.
The Pocket-Hole Jig 520 Pro has a number of unique points. For example, the jig has a 360° rotatable handle. This handle ensures that you can comfortably use the system on any project. In addition, the Pocket-Hole Jig 520 Pro has a built-in clamping system. You simply squeeze the handle until the material is clamped firmly enough. The non-slip material on the 520 Pro ensures that the jointing system will not shift, no matter what position you use the jig in.
You can measure the thickness of the material with the supplied material thickness gauge. The measurements on the gauge correspond to those on the drilling jig and EasySet drill bit. You slide the stop collar to the correct size using the material thickness gauge, which is also a hex wrench. This adjustable stop collar ensures repeat accuracy of the Kreg jointing system. By setting the stop collar once, you can thus make several pocket holes in succession in the same material thickness.
The built-in clamping system provides more repeat accuracy as well. The handle has a quick-reset function, which ensures that the clamp remains at approximately the same thickness. This allows you to work with material of the same thickness several times in a row, without having to squeeze the handle several times.
The Kreg Pocket-Hole Jig 520 Pro comes with no less than 100 pocket hole screws and a step-by-step project plan. The Kreg jointing system also comes with a 51 mm Kreg quick-release clamp, for clamping and assembling your workpiece. | Set profielmessen hoogte 40mm Nr. 0036 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Zaaglint met lengte 1750mm om te gebruiken op de TT250 lintzaagmachine van Tendotools. Dit zaaglint beschikt over 4 TPI (tanden per inch) en heeft een breedte van 10 of 13mm. Dit zaaglint in gehard staal "Flexback" is erg geschikt voor multifunctioneel zagen. Gebruik dit zaaglint zowel voor hout als voor plastics. De tanden van het zaagblad kregen een extra thermische behandeling voor verhoogde hardheid. Hierdoor blijft de band erg soepel en verhoogt uw zaagcomfort dankzij de hardheid van de tanden. | De Verticut TT2141DPM is een plaatsbesparende verticale paneelzaag voor platen van 4100 x 2100 mm.
Deze machine is het instapmodel van onze reeks professionele paneelzagen. De professionele verzwaarde draagarm kan horizontaal verplaatst worden en de zaag op de draagarm is verticaal verstelbaar.
Ze heeft een volledig gelast kader met precisiegeharde looppunten onderaan en bovenaan. De zware draagarm/mast loopt zeer soepel door de slijtvaste staafgeleiding met dubbele kogellagers. Voor het verwerken van kleine platen is een hoogtehulp voorzien, waardoor u tijd bespaart en uw rug niet onnodig belast. De machine is uitgerust met een hoofdzaag en een voorritsinrichting met inductiemotor, die het breken van laminaat en de toplaag tijdens het zagen voorkomt.
De rode horizontale plaatsteunen kunnen eenvoudig manueel ingesteld worden met de handige liftarm, om te voorkomen dat u ze bij het horizontaal zagen zou inzagen. De steun onderaan waarop de plaat rust, is uitgerust met slijtvaste kunststof glijzolen.
Daarnaast is de machine voorzien van makkelijk instelbare flipstops en een slang voor afzuiging. Ze is optioneel verkrijgbaar met een inductiemotor van 5,5 kW.
Ze wordt vervoerd in een speciale vrachtwagen met vloer die zo goed als volledig verlaagd kan worden. | Ideal for carpentry outside the workshop. Easy to place on any table without leaving traces. Gives more safety and precision in your work. The advanced design allows you to position the pieces in different ways, while always holding them securely. Its exceptional strength allows you to clamp metal pieces and carry out precision work. Strong, aluminium design with resin jaws to avoid damage to the workpiece. | Set with two milling cutters for making tongue and groove joints with a visible V-profile finish. Perfectly suited for the machining of terrace boards or boards for shutters or gardens sheds. The maximum thickness of the wood is between 24mm and 28mm. Depending on whether the wood is thinner or thicker, the v-profile will be more or less pronounced. | Set profielmessen hoogte 40mm Nr. 0008 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. |
| Additional information |
|
| Poids |
5 kg |
| Dimensions |
355 × 260 × 320 cm |
| Puissance |
1150 W
|
| Diamètre lame de scie |
160mm
|
| Profondeur de coupe 45° |
35mm
|
| Profondeur de coupe 90 ° |
55mm
|
| Nominale snelheid |
5000 rpm
|
|
| Poids |
19 kg |
| Dimensions |
620 × 490 × 420 cm |
| Epaisseur de coupe maximale |
40 mm
|
| Voltage |
230 V
|
| Puissance |
1600 W
|
| Coupe 0° x 0° |
150 x 100 mm
|
| Coupe 0° x 45° |
100 x 100 mm
|
| Coupe 45° x 0° |
150 x 70 mm
|
| Coupe 45° x 45° |
50 x 60 mm
|
| Diamètre lame de scie |
305mm
|
|
| Poids |
2,70 kg |
| Dimensions |
45 cm |
| Supporte |
40kg
|
|
| Poids |
0,325 kg |
| Dimensions |
16 × 20 × 2,2 cm |
| Afmetingen werkvlak |
150x150mm
|
| Force de fixation |
800gr/cm² à 6 bar
|
| Werkdruk |
5,5-7 bar
|
| Luchtverbruik bij 5,5 bar |
28l/min
|
|
|
| Poids |
2 kg |
| Schacht boor |
6.35 mm
|
| Boordiameter |
9.5 mm
|
| Min. materiaaldikte |
13 mm
|
| Max. materiaaldikte |
38 mm
|
|
| Poids |
0,05 kg |
| Dimensions |
0,4 cm |
|
| Poids |
0,5 kg |
| Longueur |
1750mm
|
| Largeur |
10mm, 13mm
|
| Dikte |
0,65mm
|
|
| Poids |
685 kg |
| Dimensions |
2950 × 5500 × 1200 cm |
| Diamètre lame de scie |
250mm
|
| Voltage |
3 x 400V
|
| Mast |
Manueel
|
| Epaisseur de coupe maximale |
60 mm
|
| Hauteur de coupe maximale |
2100 mm
|
| Longueur de coupe maximale |
4100 mm
|
| Basismotor |
3 kW
|
| Snelheid motor |
3000 t/min
|
| Snelheid voorritser |
5800 t/min
|
| Ondersteuning plaat |
Kunststof glijzolen
|
|
|
| Poids |
1 kg |
| Diamètre |
140mm
|
| Diamètre de l\' arbre |
30 mm
|
| Faces de coupe |
3
|
| Hauteur de rainure |
30mm
|
|
| Poids |
0,05 kg |
| Dimensions |
0,4 cm |
|
