| Content | The Kreg Micro-Pocket Drill Guide is compatible with the Pocket-Hole Jig 720 and 720 PRO. This drill guide works well with materials with a minimum thickness of 13 mm (1/2") and a maximum thickness of 25 mm, making it ideal for small jobs and tight repairs (1").
Using the Micro Pocket accessory is easy. The original drilling jig is removed from the Kreg Pocket-Hole Jig 720 or 720 pro and replaced by the Micro-Pocket Drilling Jig.
The supplied material thickness gauge can be used to determine the thickness of the material. The dimensions on the material thickness gauge correspond to those on the drill guide, so that you can quickly set it to the right size. Then screw the drill stop to the right size on the drill bit, and you are ready to use the Kreg Micro-Pocket Drill Guide.
A drill bit with drill stop and a material thickness gauge are included with the Kreg Micro-Pocket Drill Guide.
Kreg Pan Head screws are suitable for making pocket holes in small workpieces and narrow materials. The head of these screws are narrower. | | |
