| Description | With the Precision Stock Guides, you don't have to struggle to hold plates or beams while pushing through on the saw - and router table. The rollers pull your workpiece tightly into place against the guide and your work table. You will cut more safely, easily and precisely while keeping your workpiece in place at all times. | The thicknessing unit is an indispensable tool for planing on the Belmash SDM2500 and makes it possible to obtain a workpiece of excellent quality. It has its own cutterblock that is driven via the motor of the SDM2500. With this unit you can plan thickness on the SDM2500 of 5-103mm and a planing width of 250mm. | BOW push stick made of PA, high density EVA foam grip: reversible and replaceable. | This Belmash mortising table is compatible with the SDM2500 machine. The mortising table can be installed instead of the milling table. The mortising table can be fully adjusted in height and left / right. Includes two clamps for fixation of the workpiece. | Tenoning jig TJ-85 for the Itamac Panthera (Harvest) HW110SE table saws.
Ideal for sawing tenons etc. | The Ultralight spring foams are suitable for the FeatherPRO and FeatherDUO featherboards. Ultralight springs are less stiff than standard springs. This is achieved by a thinner neck on the spring hinge. Set of 2 pieces. |
| Content | With the Precision Stock Guides, you don't have to struggle to hold plates or beams while pushing through on the saw - and router table. The rollers pull your workpiece tightly into place against the guide and your work table. You will cut more safely, easily and precisely while keeping your workpiece in place at all times.
Nothing can give you more safety and precision while holding your workpiece. You prevent kickback with this. And this without limitations!
The unique guide rollers on the Stock Guide are angled at 5 degrees, effectively and consistently pressing your workpiece against the guide. To prevent kickback, each roller is fitted with a ball bearing that can only rotate 1 way.
Your workpiece is pushed tightly against the guide and work table, and the grip of the polyurethane rollers keeps it safely in position.
The Precision Stock Guide can be attached to a standard T-Track used for most commercial routing tables. They also work just as well on a workbench or drill table with a 1/4" T-Track on the guide.
The Precision Stock Guides are CNC milled from sturdy aluminium and anodised for appearance and durability. The axles of the wheels are made of cold-rolled steel and hardened for durability. The adjustment knobs are made of stainless steel to last. The wheels are again made of wear-resistant acetol plastic, so it also has low friction resistance. The non-slip tyres are moulded from polyurethane for long life and superior grip on your workpiece.
The ITAMAC Precision Stock Guides can be installed easily and quickly. Along the profile, you can attach them in any position with a twist of the two knobs. You can set the height using the clamp button. When not in use, simply turn them aside. | The thicknessing unit is an indispensable tool for thickness planing on the Belmash SDM2500 and makes it possible to obtain a workpiece of excellent quality. It has its own cutterblock that is driven via the motor of the SDM2500. With this unit you can plan thickness on the SDM2500 of 5-103mm and a planing width of 250mm. | The PushPRO Push stick offers an unprecedented safety improvement and innovative new advantages in a tool category that has hardly seen any innovations for years.
With the High Density EVA tips, the PushPRO improves feed control, protects the wood and protects you and your tools in case of accidental contact between the push stick and the saw blade.
The PushPRO prevents the use of plastic to guide the wood. When pressure is applied, plastic can affect the porosity of some woods.
Plastic does not absorb vibrations due to the high-density foam used in the PushPRO. PushPRO provides a better cut than a plastic push stick. | This Belmash mortising table is compatible with the SDM2500 machine. The mortising table can be installed instead of the milling table. The mortising table can be fully adjusted in height and left / right. Includes two clamps for fixation of the workpiece. | Tenoning jig TJ-85 for the Itamac Panthera (Harvest) HW110SE table saws.
Ideal for sawing tenons etc. | The Ultralight spring foams are suitable for the FeatherPRO and FeatherDUO featherboards. Ultralight springs are less stiff than standard springs. This is achieved by a thinner neck on the spring hinge. Set of 2 pieces. |
Reviews
There are no reviews yet.